Displays vrfs using the vrf_list rather than the route-nodes. This allows "show vrf"
to display inactive (or not yet active) vrfs. Also, IPv6 static routes are now
allowed to be defined and displayed prior to the netlink vrf add.
Ticket: CM-10139
Signed-off-by: Don Slice
Reviewed-by: Donald Sharp
The static zebra functions are passing around the vrf_id
At the crunchy edges gather the zvrf from passed in
vrf name and pass that around instead.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-9974
Reviewed By: CCR-4531
Testing Done: Testing with both single & multiple NHs
Zebra is counting each NH as a separate route which leads to all wrong
stats. Count routes, not NHs.
Move zebra_vrf_XXX functionality into it's own
file so that we can isolate a bit the api edges
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
When configuring an IPv6 static route with the nexthop as a link-local
IPv6 address, the associated interface has to be looked up in the correct
VRF.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Ticket: CM-10169
Reviewed By: CCR-4382
Testing Done: Manual
Changed output of the "ipv6 route ... vrf red" to display and store with the
vrf name instead of the vrf_id, since the vrf_id would disappear on reboot
or quagga restart.
Ticket: CM-10126
Signed-off-by: Don Slice
Reviewed-by: Donald Sharp
To make the syntax of the "show ip route" vrf commands more closely align with the bgp variety,
moved the vrf forward in the command. In other words, show ip route 10.1.1.1/32 vrf green became
show ip route vrf green 10.0.0.1/32. Also added a couple of missing show vrf commands (ipv4 and
ipv6 tags).
Ticket: CM-9114
Signed-off-by: Don Slice
Reviewed-by: Donald Sharp
Changed output to use the name and table id rather than the vrf_id, since the vrf_id
isn't really meaningful to customers reading the output.
Ticket: CM-9464
Signed-off-by: Don Slice
Reviewed-by: Donald Sharp
The 'show ipv6 nht' command was not properly
hooked up into the cli.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Convert the rest of zebra over to use a Namespae and VRF.
Signed-off-by: Vipin Kumar <vipin@cumulusnetworks.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The NEXTHOP_TYPE_XXX_IFNAME types were never being used. Remove them
and the code associated with them.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we get a static route through an interface convert the interface
name to an ifindex and pass it through to zebra_rib.c. zebra_rib.c
should not care about the ifname.
This code change will allow us to collapse some of the NEXTHOP_XXX types.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
During CR for nexthop upstream it was noticed that usage
of prefix2str was not consistent. This fixes this problem
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Introduce new commands to configure static routes in any VRF, by
appending the old static route commands with a new parameter
"vrf N".
A new parameter "const char *vrf_id_str" is added to the functions
zebra_static_ipv4() and static_ipv6_func() to get the configured
VRF ID.
A new member "vrf_id" is added to the "struct static_ipv4" and
"struct static_ipv6", indicating which VRF this static route is
configured in.
But till now, no interface can exist in any non-default VRF. So
these static routes in non-default VRFs are kept inactive.
Signed-off-by: Feng Lu <lu.feng@6wind.com>
Reviewed-by: Alain Ritoux <alain.ritoux@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Conflicts:
zebra/zebra_rib.c
zebra/zebra_vty.c
The present "show ip[v6] [m]route [xxx]" and "show ip rpf [xxx]"
commands now show routes only in the default VRF.
A new option is introduced to show routes in a specified VRF:
show ip[v6] [m]route [xxx] vrf N
show ip rpf [xxx] vrf N
and a new option is used to show routes through all VRFs:
show ip[v6] [m]route [xxx] vrf all
show ip rpf [xxx] vrf all
Signed-off-by: Feng Lu <lu.feng@6wind.com>
Reviewed-by: Alain Ritoux <alain.ritoux@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
[DL: conflicts resolved]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Conflicts:
zebra/zebra_vty.c
Conflicts:
nhrpd/nhrp_interface.c
zebra/zebra_rib.c
zebra/zebra_rnh_null.c
zebra/zebra_vty.c
A new member "vrf_id" is added to "struct rib", reflecting the VRF
which it belongs to.
A new parameter "vrf_id" is added to the relative functions where
need, except those:
- which already have the parameter "vrf_id"; or
- which have a parameter in type of "struct rib"; or
- which have a parameter in type of "struct interface".
All incoming routes are set to default VRF.
In fact, all routes in FIB are kept in default VRF. And the logic
is not changed.
Signed-off-by: Feng Lu <lu.feng@6wind.com>
Reviewed-by: Alain Ritoux <alain.ritoux@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
[DL: conflicts fixed + compile warning fix]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Conflicts:
zebra/connected.c
zebra/kernel_socket.c
zebra/rib.h
zebra/rt_netlink.c
zebra/zebra_rib.c
zebra/zserv.c
Conflicts:
zebra/connected.c
zebra/interface.c
zebra/kernel_socket.c
zebra/rib.h
zebra/rt_netlink.c
zebra/rtread_getmsg.c
zebra/zebra_rib.c
zebra/zebra_vty.c
zebra/zserv.c
Previously "struct vrf" is defined locally in zebra. Now it is moved
to be a lib module.
This is the first step to support multi-VRF in quagga. The
implementation is splitted into small patches for the purpose of
easy review.
* lib:
"struct vrf" with basic members is defined in vrf.c. The member
"void *info" is for user data.
Some basic functions are defined in vrf.c for adding/deleting/
looking up a VRF, scanning the VRF table and initializing the
VRF module.
The type "vrf_id_t" is defined specificly for VRF ID.
* zebra:
The previous "struct vrf" is re-defined as "struct zebra_vrf";
and previous "vrf" variables are renamed to "zvrf".
The previous "struct vrf" related functions are removed from
zbera_rib.c. New functions are defined to maintain the new
"struct zebra_vrf".
The names vrf_xxx are reserved for the functions in VRF module.
So:
- the previous vrf_table() are renamed to zebra_vrf_table();
- the previous vrf_static_table() are renamed to
zebra_vrf_static_table().
The main logic is not changed.
BTW: Add a statement to zebra_snmp.c telling that the SNMP is
running only for the MIBs in the default VRF.
Signed-off-by: Feng Lu <lu.feng@6wind.com>
Reviewed-by: Alain Ritoux <alain.ritoux@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Conflicts:
lib/Makefile.am
zebra/zebra_rib.c
zebra/zebra_vty.c
Conflicts:
lib/Makefile.am
lib/memtypes.c
zebra/rib.h
zebra/zebra_rib.c
zebra/zebra_rnh.c
zebra/zebra_rnh.h
zebra/zebra_vty.c
The 'struct static_ipv4' and 'struct static_ipv6' structures
are essentially the same. Collapse them into one data structure
'struct static_route'.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This adds support for BGP RFC 5549 (Extended Next Hop Encoding capability)
* send and receive of the capability
* processing of IPv4->IPv6 next-hops
* for resolving these IPv6 next-hops, itsworks with the current
next-hop-tracking support
* added a new message type between BGP and Zebra for such route
install/uninstall
* zserv side of changes to process IPv4 prefix ->IPv6 next-hops
* required show command changes for IPv4 prefix having IPv6 next-hops
Few points to note about the implementation:
* It does an implicit next-hop-self when a [IPv4 prefix -> IPv6 LL next-hop]
is to be considered for advertisement to IPv4 peering (or IPv6 peering
without Extended next-hop capability negotiated)
* Currently feature is off by default, enable it by configuring
'neighbor <> capability extended-nexthop'
* Current support is for IPv4 Unicast prefixes only.
IMPORTANT NOTE:
This patch alone isn't enough to have IPv4->IPv6 routes installed into
the kernel. A separate patch is needed for that to work for the netlink
interface.
Signed-off-by: Vipin Kumar <vipin@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Vivek Venkatraman <vivek@cumulusnetworks.com>
Donald Sharp <sharpd@cumulusnetworks.com>
BGP: Fix network import check use with NHT instead of scanner
When next hop tracking was implemented and the bgp scanner was eliminated,
the "network import-check" command got broken. This patch fixes that
issue. NHT is used to not just track nexthops, but also the static routes
that are announced as part of BGP's network command. The routes are
registered only when import-check is enabled. To optimize performance,
we register static routes only when import-check is enabled.
Signed-off-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
Resolving routes over the default route for NHT can lead to all sorts
of problems. So, we explicitly exclude resolving routes for NHT over the
default route. A knob is provided to allow the route to be resolved over
the default in case of special circumstances.
Signed-off-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Zebra: Redistribute routes from non-main kernel table to main.
This can be the basis for many interesting features such as variations
of redistribute ARP, using zebra as the RIB in the presence of multiple
routing protocol stacks etc. The code only supports IPv4 for now, but
the infrastructure is in place for IPv6.
Usage:
There is a new route type introduced by this model: TABLE. Routes
imported from alternate kernel tables will have their protocol type set to
TABLE.
Routes from alternate kernel tables MUST be first imported into the main
table via "ip import-table <table id>". They can then be redistributed via
a routing protocol via the "redistribute table" command. Each imported table
can an optional administrative distance specified. In Zebra, a route with a
lower distance is chosen over routes with a higher distance. So, distance
is how the user can choose to prioritize routes from a particular table over
routes from other tables or routes learnt another way in zebra.
Route maps for imported tables are specified via "ip protocol" command in
zebra. Route maps for redistributed routes within a routing protocol are
subject to the route map options supported by the protocol. The
"match source-protocol" option in route maps can match against "table"
to filter routes learnt from alternate kernel routing tables.
Signed-off-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
——————————————-------------
- etc/init.d/quagga is modified to support creating separate ospf daemon
process for each instance. Each individual instance is monitored by
watchquagga just like any protocol daemons.(requires initd-mi.patch).
- Vtysh is modified to able to connect to multiple daemons of the same
protocol (supported for OSPF only for now).
- ospfd is modified to remember the Instance-ID that its invoked with. For
the entire life of the process it caters to any command request that
matches that instance-ID (unless its a non instance specific command).
Routes/messages to zebra are tagged with instance-ID.
- zebra route/redistribute mechanisms are modified to work with
[protocol type + instance-id]
- bgpd now has ability to have multiple instance specific redistribution
for a protocol (OSPF only supported/tested for now).
- zlog ability to display instance-id besides the protocol/daemon name.
- Changes in other daemons are to because of the needed integration with
some of the modified APIs/routines. (Didn’t prefer replicating too many
separate instance specific APIs.)
- config/show/debug commands are modified to take instance-id argument
as appropriate.
Guidelines to start using multi-instance ospf
---------------------------------------------
The patch is backward compatible, i.e for any previous way of single ospf
deamon(router ospf <cr>) will continue to work as is, including all the
show commands etc.
To enable multiple instances, do the following:
1. service quagga stop
2. Modify /etc/quagga/daemons to add instance-ids of each desired
instance in the following format:
ospfd=“yes"
ospfd_instances="1,2,3"
assuming you want to enable 3 instances with those instance ids.
3. Create corresponding ospfd config files as ospfd-1.conf, ospfd-2.conf
and ospfd-3.conf.
4. service quagga start/restart
5. Verify that the deamons are started as expected. You should see
ospfd started with -n <instance-id> option.
ps –ef | grep quagga
With that /var/run/quagga/ should have ospfd-<instance-id>.pid and
ospfd-<instance-id>/vty to each instance.
6. vtysh to work with instances as you would with any other deamons.
7. Overall most quagga semantics are the same working with the instance
deamon, like it is for any other daemon.
NOTE:
To safeguard against errors leading to too many processes getting invoked,
a hard limit on number of instance-ids is in place, currently its 5.
Allowed instance-id range is <1-65535>
Once daemons are up, show running from vtysh should show the instance-id
of each daemon as 'router ospf <instance-id>’ (without needing explicit
configuration)
Instance-id can not be changed via vtysh, other router ospf configuration
is allowed as before.
Signed-off-by: Vipin Kumar <vipin@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
Credit
------
A huge amount of credit for this patch goes to Piotr Chytla for
their 'route tags support' patch that was submitted to quagga-dev
in June 2007.
Documentation
-------------
All ipv4 and ipv6 static route commands now have a "tag" option
which allows the user to set a tag between 1 and 65535.
quagga(config)# ip route 1.1.1.1/32 10.1.1.1 tag ?
<1-65535> Tag value
quagga(config)# ip route 1.1.1.1/32 10.1.1.1 tag 40
quagga(config)#
quagga# show ip route 1.1.1.1/32
Routing entry for 1.1.1.1/32
Known via "static", distance 1, metric 0, tag 40, best
* 10.1.1.1, via swp1
quagga#
The route-map parser supports matching on tags and setting tags
!
route-map MATCH_TAG_18 permit 10
match tag 18
!
!
route-map SET_TAG_22 permit 10
set tag 22
!
BGP and OSPF support:
- matching on tags when redistribing routes from the RIB into BGP/OSPF.
- setting tags when redistribing routes from the RIB into BGP/OSPF.
BGP also supports setting a tag via a table-map, when installing BGP
routes into the RIB.
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
BGP: Reprocess the trigger points when an attached route map changes
Currently, modifications to route maps do not affect already processed
routes; they only affect new route updates. This patch addresses this
limitation.
Signed-off-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
quagga: nexthop-tracking.patch
Add next hop tracking support to Quagga. Complete documentation in doc/next-hop-tracking.txt.
Signed-off-by: Pradosh Mohapatra <pmohapat@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Signed-off-by: Dinesh Dutt <ddutt@cumulusnetworks.com>
Quagga sources have inherited a slew of Page Feed (^L, \xC) characters
from ancient history. Among other things, these break patchwork's
XML-RPC API because \xC is not a valid character in XML documents.
Nuke them from high orbit.
Patches can be adapted simply by:
sed -e 's%^L%%' -i filename.patch
(you can type page feeds in some environments with Ctrl-V Ctrl-L)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Fixup some DEFUNS with incorrect command strings or mixed up helpstrings.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
On Linux, the kernel will only allow for a route to be installed when
its gateway is directly attached according the kernel fib.
There are cases when this restriction by the kernel is too strong, in
those cases, we deploy the RTNH_F_ONLINK netlink flag.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Change the datastructure for recursive routes. This brings the following
benefits:
By using struct nexthop also to store nexthops obtained by recursive
resolution, we can get rid of quite a bit of code duplication in the fib
management. (rt_netlink, rt_socket, ...)
With the new datastructure we can make use of all available paths when
recursive routes are resolved with multipath routes.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Add the rib_dest_t structure to hold per-prefix state in the routing
information base. This gives us an appropriate place to maintain the
queueing state of a route_node. Queuing state was previously being
stored on the first rib in the list of ribs hanging off the
route_node.
* zebra/rib.h
- Add new structure rib_dest_t.
- Remove the rn_status field from 'struct rib', it is no longer
required.
- Add macros (RNODE_FOREACH_RIB, RNODE_FOREACH_RIB_SAFE) for
walking all 'struct ribs' corresponding to a route_node. These
hide the fact that there is an intermediate rib_dest_t
structure.
- Add a few utility inlines to go between a rib_dest_t and
associated structures.
* zebra/zebra_rib.c
- rib_link()/rib_unlink()
Tweak for new behavior, where the 'info' pointer of a route_node
points to a rib_dest_t. The list of ribs for a prefix now hangs
off of the dest.
Change the way we ref count route_nodes. We now hold a single
ref count on a route_node if there is a corresponding
rib_dest_t.
- Maintain the queuing state of a route_node on the flags field of
the rib_dest_t.
- Add the rib_gc_dest() function, which deletes a rib_dest_t if it
is no longer required. A rib_dest_t can be deleted iff there are
no struct ribs hanging off of it.
- Call rib_gc_dest() any time we unlink a rib from the
rib_dest_t. Currently we only need to call it once, just before
we return from rib_process().
* zebra/{redistribute,zebra_rib,zebra_snmp,zebra_vty}.c
Use new macros to walk over route_node ribs.
* lib/memtypes.c
Add memory type for rib_dest_t.
Signed-off-by: Avneesh Sachdev <avneesh@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
let's ground the rtadv.h file if route advertisements are disabled. And
fix up the CLI for it, as well as move the "show ip mroute" to its
proper place.
* zebra/rtadv.h: #ifdef RTADV
* zebra/main.c: #ifdef RTADV
* zebra/zebra_vty.c: move "show ip mroute" out of #ifdef IPV6
From: Joachim Nilsson <troglobit@gmail.com>
[moved #ifdef RTADV to rtadv.h]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This patch contains the following:
1. Addition of IPv4 SAFI_MULTICAST BGP routes into the RTM's RIB.
2. Deletion of IPv4 SAFI_MULTICAST BGP routes from the RTM's RIB.
this replaces most occurences of routing protocol lists by preprocessor
defines from route_types.h. the latter is autogenerated from
route_types.txt by a perl script (previously awk). adding a routing
protocol now is mostly a matter of changing route_types.txt and log.c.
Conflicts:
lib/route_types.awk
