The first argument of sid_unregister should be default bgp instance.
However, these functions passed VRF bgp instance to this funciton.
Signed-off-by: Ryoga Saito <ryoga.saito@linecorp.com>
Currently bgpd uses the opaque codepoint (0xFFFF) in the BGP
advertisement. In this commit, we update bgpd to use the SRv6 codepoints
defined in the IANA SRv6 Endpoint Behaviors Registry
(https://www.iana.org/assignments/segment-routing/segment-routing.xhtml)
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
This commit changes some debug prints to use `%pI6` instead of
`inet_ntop` to print SRv6 SIDs.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
`srv6_locator_chunk_free()` takes care of freeing the memory allocated
for a `struct srv6_locator_chunk` and setting the
`struct srv6_locator_chunk` pointer to NULL.
It is not necessary to explicitly set the pointer to NULL after invoking
`srv6_locator_chunk_free()`.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
A programmer can use the `srv6_locator_chunk_free()` function to free
the memory allocated for a `struct srv6_locator_chunk`.
The programmer invokes `srv6_locator_chunk_free()` by passing a single
pointer to the `struct srv6_locator_chunk` to be freed.
`srv6_locator_chunk_free()` uses `XFREE()` to free the memory.
It is the responsibility of the programmer to set the
`struct srv6_locator_chunk` pointer to NULL after freeing memory with
`srv6_locator_chunk_free()`.
This commit modifies the `srv6_locator_chunk_free()` function to take a
double pointer instead of a single pointer. In this way, setting the
`struct srv6_locator_chunk` pointer to NULL is no longer the
programmer's responsibility but is the responsibility of
`srv6_locator_chunk_free()`. This prevents programmers from making
mistakes such as forgetting to set the pointer to NULL after invoking
`srv6_locator_chunk_free()`.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
The command `sid vpn per-vrf export (1-255)|auto` can be used to export
IPv4 and IPv6 routes from a VRF to the VPN RIB using a single SRv6 SID
(End.DT46 behavior).
This commit implements the no form of the above command, which can be
used to disable the export of the IPv4/IPv6 routes:
`no sid vpn per-vrf export`.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
In the current implementation of bgpd, SRv6 SIDs can be configured only
under the address-family. This enables bgpd to leak IPv6 routes using
an SRv6 End.DT6 behavior and IPv4 routes using an SRv6 End.DT4
behavior. It is not possible to leak both IPv6 and IPv4 routes using a
single SRv6 SID.
This commit adds a new CLI command
"sid vpn per-vrf export <sid_idx|auto>" that enables bgpd to leak both
IPv6 and IPv4 routes using a single SRv6 SID (End.DT46 behavior).
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
In order to send correct SRv6 L3VPN advertisement, we need to save
srv6_locator_chunk in vpn_policy. With this information, we can
construct correct SRv6 L3VPN advertisement packets.
Signed-off-by: Ryoga Saito <ryoga.saito@linecorp.com>
When router id is changed through config, new RD is auto generated.
However new export RT was being assigned without freeing
the older RT from VRF.
Signed-off-by: Samanvitha B Bhargav <bsmanvitha@vmware.com>
RFC4364 describes peerings between multiple AS domains, to ease
the continuity of VPN services across multiple SPs. This commit
implements a sub-set of IETF option b) described in chapter 10 b.
The ASBR to ASBR approach is taken, with an EBGP peering between
the two routers. The EBGP peering must be directly connected to
the outgoing interface used. In those conditions, the next hop
is directly connected, and there is no need to have a transport
label to convey the VPN label. A new vty command is added on a
per interface basis:
This command if enabled, will permit to convey BGP VPN labels
without any transport labels (i.e. with implicit-null label).
restriction:
this command is used only for EBGP directly connected peerings.
Other use cases are not covered.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Let's convert to our actual library call instead
of using yet another abstraction that makes it fun
for people to switch daemons.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
A new command is available under SAFI_MPLS_VPN:
With this command, the BGP vpnvx prefixes received are
not kept, if there are no VRF interested in importing
those vpn entries.
A soft refresh is performed if there is a change of
configuration: retain cmd, vrf import settings, or
route-map change.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The bgp_nexthop must be the source bgp structure. It cannot be the
destination bgp one.
Use bgp_orig source bgp struct by default.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
The "struct bgp" variable names in the mplsvpn bgp code do not
explicitly say whether they refer to a source or destination BGP
instance. Some variable declarations are commented out with "from" and
"to" but this does not avoid confusion within the functions. The names
of "struct bgp" variables are reused in different functions but their
names sometimes refer to a source instance and sometimes to a
destination instance.
Rename the "struct bgp" variable names to from_bgp and to_bgp.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Prior to this fix, the magic number (16) was used regardless of what value
the user specified for func-bits. With this fix, user-specified values are
handled appropriately.
Signed-off-by: Nobuhiro MIKI <nmiki@yahoo-corp.jp>
Until now, it has been hard-coded that the position at which the label
is inserted is from the 64th bits. Therefore, when the Locator prefix
was not /64, incorrect SIDs were generated. Also, SIDs are generated
in duplicate on Lines 604 & 613 in bgpd/bgp_mplsvpn.c.
In this patch, the position where the label is inserted is calculated
based on the sum of block_bits_length and node_bits_length (i.e., the
user-specified Locator prefix length). In addition, SID generation is
performed at one location in alloc_new_sid.
Signed-off-by: Nobuhiro MIKI <nmiki@yahoo-corp.jp>
Since additional information such as block_bits_length is needed to
generate SIDs properly, the type of elements in srv6_locator_chunks
list is extended from "struct prefix_ipv6 *" to
"struct srv6_locator_chunk *". Even in terms of variable name,
"struct srv6_locator_chunk *" is appropriate.
Signed-off-by: Nobuhiro MIKI <nmiki@yahoo-corp.jp>
This patch adds transpostion_offset and transposition_len to bgp_sid_info,
and transposes SID only at bgp_zebra_announce.
Signed-off-by: Ryoga Saito <ryoga.saito@linecorp.com>
This patch changes the format of the Prefix-SID advertised by
bgpd. In current implementation, transposed SIDs were
advertised, which caused two problems:
1. bgpd that receives SRv6 L3VPN routes whose SID is
transposed couldn't put bgp_attr_srv6_l3vpn whose those
routes together. This leads extra memory consumption.
2. Some implementation will reject a route with transposed SID.
This will affect interoperability.
For those reasons, in this patch, instead of advertising
transposed SID, we change it to advertise the locator of SID.
Signed-off-by: Ryoga Saito <ryoga.saito@linecorp.com>
For the later patches, this patch changes the behavior of alloc_new sid
so that bgpd record not only SID for VRF, but also Locator of SID.
Signed-off-by: Ryoga Saito <ryoga.saito@linecorp.com>
Description:
Incorrect behavior during best path selection for the imported routes.
Imported routes are always treated as eBGP routes.
Change is intended for fixing the issues related to
bgp best path selection for leaked routes:
- FRR does ecmp for the imported routes,
even without any ecmp related config.
If the same prefix is imported from two different VRFs,
then we configure the route with ecmp even without
any ecmp related config.
- Locally imported routes are preferred over imported
eBGP routes.
If there is a local route and eBGP learned route
for the same prefix, if we import both the routes,
imported local route is selected as best path.
- Same route is imported from multiple tenant VRFs,
both imported routes point to the same VRF in nexthop.
- When the same route with same nexthop in two different VRFs
is imported from those two VRFs, route is not installed as ecmp,
even though we had ecmp config.
- During best path selection, while comparing the paths for imported routes,
we should correctly refer to the original route i.e. the ultimate path.
- When the same route is imported from multiple VRF,
use the correct VRF while installing in the FIB.
- When same route is imported from two different tenant VRFs,
while comparing bgp path info as part of bgp best path selection,
we should ideally also compare corresponding VRFs.
See-also: https://github.com/FRRouting/frr/files/7169555/FRR.and.Cisco.VRF-Lite.Behaviour.pdf
Co-authored-by: Santosh P K <sapk@vmware.com>
Co-authored-by: Kantesh Mundaragi <kmundaragi@vmware.com>
Signed-off-by: Iqra Siddiqui <imujeebsiddi@vmware.com>
