Column headers in BGP routes table are not aligned with data when
RPKI status is available. This was fixed to insert a space at the
beginning of the header and at the beginning of lines that do not
have RPKI status.
This fix requires that several testing templates be adjusted to
match the new output.
Signed-off-by: Wayne Morrison <wmorrison@netgate.com>
This commit extends the `bgp_srv6l3vpn_to_bgp_vrf3` topotest by adding
two tests:
* prevent bgpd from exporting routes from a VRF to the VPN RIB
(`no sid vpn per-vrf export`);
* enable bgpd to export routes from a VRF to the VPN RIB
(`sid vpn per-vrf export auto`).
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
This commit adds a new topotest to verify the functionality of SRv6
locators with custom bits length parameters.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
This commit adds a new topotest which tests SRv6 L3VPN for IPv4 and
IPv6 address families using a single SID.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
This commit adds a new test case to the
test_zebra_seg6local_route topotest. The new test case performs two
operations:
* try to install a seg6local route with an End.DT46 action
* verify that the route is created correctly
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
When bgp is using `bgp suppress-fib-pending` and the end
operator is using network statements, bgp was not sending
the network'ed prefix'es to it's peers. Fix this.
Also update the test cases for bgp_suppress_fib to test
this new corner case( I am sure that there are going to
be others that will need to be added ).
Fixes: #12112
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Currently, if `bgp max-med on-startup` is configured, after BGP session
is established for the first time, a timer for the specified time is
started. When the timer is expired, an UPDATE message should be sent to
reflect changes in the routes' MED value. The problem is that the routes
are being suppressed because based on the attributes they look like they
have not changed. However, in the case of max-med, the value is copied
to the packet directly from `bgp->maxmed_value`, not from the
attributes. Thus, changes in this case cannot be detected by comparing
attributes.
With this fix, avoid route suppressing when the `max-med on-startup`
timer expires and initiates an UPDATE.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Updating topojson script's assert messages,
which will help in better debugging, when
test will fail.
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
The bgp_gr_restart_retain_routes test is looking for specific output
that does not include the routes nexthop id:
def _bgp_check_kernel_retained_routes():
output = (
r2.cmd("ip route show 172.16.255.1/32 proto bgp dev r2-eth0")
.replace("\n", "")
.rstrip()
)
expected = "172.16.255.1 via 192.168.255.1 metric 20"
diff = topotest.get_textdiff(
output, expected, "Actual IP Routing Table", "Expected IP RoutingTable"
)
if diff:
return False
return True
While the output includes nexthop group id's now:
root@r2:# ip route show 172.16.255.1 proto bgp dev r2-eth0
172.16.255.1 nhid 8 via 192.168.255.1 metric 20
Let's just mark r2 as not to use nexthop groups for installation
and this test issue will go away.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
In order to minimize the changes of test files, this PR adds `func-bits`
parameters on the SRv6 locator definition.
Signed-off-by: Ryoga Saito <ryoga.saito@linecorp.com>
The issue fixed in the previous commit now correctly triggers a failure:
("assertion (list_add(&head, &itm[j]) == &itm[j]) failed")
Turns out the "shitty" hash function was not shitty enough.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
We might disable sending unconfig/shutdown notifications when
Graceful-Restart is enabled and negotiated.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
When primary global v6 unicast address is configured on an
unnumbered interface, BGP does not re-advertise updates out
with the new global v6 address as the nexthop
Signed-off-by: Pdoijode <pdoijode@nvidia.com>
Before it worked only when configured initially via CLI. Later, when we
receive a new route, that should match a decent MED, we just skip it, because
MED mismatch is not recalculated.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
When redistributing connected addresses, the address family has
to be figured out. The calculation was not done, the next-hop
address length was not set, and as consequence, the nexthop
is displayed like if it was an ipv6 address, which is wrong for
ipv4 addresses.
Calculate the family for connected addresses.
Change the topotests accordingly.
Fixes: ("7226bc40d606") bgpd: ignore NEXT_HOP for MP_REACH_NLRI
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This test ensures that MPLS VPN routes can be installed into a
gre interface with route-map l3vpn next-hop encapsulation command
set. On the other hand, if this command is not set, incoming bgp
routes are not considered as valid.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
- double the size of each new chunk request from zebra
- use bitfields to track label allocations in a chunk
- When allocating:
- skip chunks with no free labels
- search biggest chunks first
- start search in chunk where last search ended
- Improve API documentation in comments (bgp_lp_get() and callback)
- Tweak formatting of "show bgp labelpool chunks"
- Add test features (compiled conditionally on BGP_LABELPOOL_ENABLE_TESTS)
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
