PR 5118 introduce additional (prepend) keywords
like 'ip' to Route Distinguisher output which
breaks existing evpn route show commands parsing.
Restore to original behavior.
Testing Done:
vtysh -c 'show bgp l2vpn evpn route'
Before fix:
Route Distinguisher: ip 27.0.0.15:44
Post fix:
Route Distinguisher: 27.0.0.15:44
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
The opaque lsa that we are storing is stored on various
lists depending on it's type. This removal from the
list was being done *after* the pointer was freed. This
is not a good idea. Since the use after free was just
removal from a linked list and the freeing function does
not do anything other than free data, than just switching the function
order should be sufficient.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This reverts commit 7d5bb02b1a.
Allow zebra to actually maintain the nexthop group in the
linux kernel.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In symmetric routing case for evpn (type-2/type-5)
routes, nexthop and Router mac fields can change from
the originating VTEP.
At the receiving VTEP, bgp path info may points to different
nexthop IP (nh1->nh2) and Remote MAC remain the same.
When the bgp sync the route with nexthop and RMAC fields.
For the exisitng rmac entry update/replace with the new
nexthop (VTEP) IP in remote rmac db in Zebra.
Similarly, bgp path info may points different Router-mac
(RMAC1->RMAC2) and the nexthop value remains the same.
In this case, update to the new RMAC value for the
existing remote nexthop in the Zebra' nexthop cache db.
Ticket:CM-26917
Reviewed By:CCR-9435
Testing Done:
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Recently had a case where I was attempting to debug a nexthop tracking
issue across multiple bgp vrf's and since the setup vrf's in it with
overlapping address ranges, it became real fun real fast to track
vrf data associated. Add a bit of code to allow us to figure out
what vrf we are in when we print out debug messages.
Look through the rest of the code and find debugs where we are
not using bgp->name_pretty and switch it over.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Prevent IPv6 Link-local address being forward to IBGP peer,
which are not directly connected.
R1----IPV6-unnumbered-EBGP-------R2-----IPV6-IBGP-----R3
Configure route-map to set preferred global address on and apply
route-map-IN on R2 for R1-R2 session. Now check on R3's BGP and
RIB table has route nexthop as R1 link-local address, which is
not correct.
As of now we clear link-local address info from mp_nexthop_global,
only if mp_nexthop_global is populated with link-local address.
We should do it even if route-map is configured boz forwarding
link-local address from one link scope to another is violation of
the standards.
Signed-off-by: Biswajit Sadhu sadhub@vmware.com
This commit make bgpd to skip and ignore unsupported
sub-type of PREFIX_SID. (especially new defined sub-type)
Current bgpd can't parase unsupported sub-type of PREFIX_SID.
PREFIX_SID is drafted on draft-ietf-idr-bgp-prefix-sid-27.
There are already new sub-type drafted on
draft-dawra-idr-srv6-vpn-05. (Type5,6 is new defined.)
This commit fix the problem reported as #5277 on GitBub.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
The final test case of this topotest wasn't really testing
anything. Do the following changes to fix this:
* Remove "no link-detect" from the zebra configs so that link down
failures are detected immediately;
* After shutting down the interface between r1 and r2, wait five
seconds before testing if the pseudowires reconverged through
the r3 router.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is necessary to make some tests work correctly. Only topologies
created using the topogen framework benefit from this change.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When adding an OIF to the OIL, if we are not the DR
there is no need to install it then remove it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Always bind the created sockets to their respective VRF devices. With
this it should be possible to run BFD on VRFs without needing to weaken
the security setting `net.ipv4.udp_l3mdev_accept=1`.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Some authors are added in the "GPL-2+" section, notably Alexandre
Cassen for the code in `vrrpd/`, and Cumulus Networks and Open Source
Routing which were uncredited despite many occurrence in the headers.
Signed-off-by: Vincent Bernat <vincent@bernat.ch>
We were creating `other` tables in rib_del(), vty commands, and
dataplane return callback via the zebra_vrf_table_with_table_id()
API.
Seperate the API into only a lookup, never create
and added another with `get` in the name (following the standard
we use in other table APIs).
Then changed the rib_del(), rib_find_rn_from_ctx(), and show route
summary vty command to use the lookup API instead.
This was found via a crash where two different vrfs though they owned
the table. On delete, one free'd all the nodes, and then the other tried
to use them. It required specific timing of a VRF existing, going away,
and coming back again to cause the crash.
=23464== Invalid read of size 8
==23464== at 0x179EA4: rib_dest_from_rnode (rib.h:433)
==23464== by 0x17ACB1: zebra_vrf_delete (zebra_vrf.c:253)
==23464== by 0x48F3D45: vrf_delete (vrf.c:243)
==23464== by 0x48F4468: vrf_terminate (vrf.c:532)
==23464== by 0x13D8C5: sigint (main.c:172)
==23464== by 0x48DD25C: quagga_sigevent_process (sigevent.c:105)
==23464== by 0x48F0502: thread_fetch (thread.c:1417)
==23464== by 0x48AC82B: frr_run (libfrr.c:1023)
==23464== by 0x13DD02: main (main.c:483)
==23464== Address 0x5152788 is 104 bytes inside a block of size 112 free'd
==23464== at 0x48369AB: free (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
==23464== by 0x48B25B8: qfree (memory.c:129)
==23464== by 0x48EA335: route_node_destroy (table.c:500)
==23464== by 0x48E967F: route_node_free (table.c:90)
==23464== by 0x48E9742: route_table_free (table.c:124)
==23464== by 0x48E9599: route_table_finish (table.c:60)
==23464== by 0x170CEA: zebra_router_free_table (zebra_router.c:165)
==23464== by 0x170DB4: zebra_router_release_table (zebra_router.c:188)
==23464== by 0x17AAD2: zebra_vrf_disable (zebra_vrf.c:222)
==23464== by 0x48F3F0C: vrf_disable (vrf.c:313)
==23464== by 0x48F3CCF: vrf_delete (vrf.c:223)
==23464== by 0x48F4468: vrf_terminate (vrf.c:532)
==23464== Block was alloc'd at
==23464== at 0x4837B65: calloc (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
==23464== by 0x48B24A2: qcalloc (memory.c:110)
==23464== by 0x48EA2FE: route_node_create (table.c:488)
==23464== by 0x48E95C7: route_node_new (table.c:66)
==23464== by 0x48E95E5: route_node_set (table.c:75)
==23464== by 0x48E9EA9: route_node_get (table.c:326)
==23464== by 0x48E1EDB: srcdest_rnode_get (srcdest_table.c:244)
==23464== by 0x16EA4B: rib_add_multipath (zebra_rib.c:2730)
==23464== by 0x1A5310: zread_route_add (zapi_msg.c:1592)
==23464== by 0x1A7B8E: zserv_handle_commands (zapi_msg.c:2579)
==23464== by 0x19D689: zserv_process_messages (zserv.c:523)
==23464== by 0x48F09F8: thread_call (thread.c:1599)
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
We have a zlog_warn that is unguarded ( and really is a debug message )
as that there is nothing the end user can do and nothing to note
here other than a debug message to track refcounts. Change
to an appropriate debug and zlog_debug it instead.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
As per weekly meeting this is an attempt to document about
how we as a community will work together on development
branches.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Running with --enable-address-sanitizer I am seeing this:
=================================================================
==19520==ERROR: AddressSanitizer: heap-use-after-free on address 0x6020003ef850 at pc 0x7fe9b8f7b57b bp 0x7fffbac6f9c0 sp 0x7fffbac6f170
READ of size 6 at 0x6020003ef850 thread T0
#0 0x7fe9b8f7b57a (/lib/x86_64-linux-gnu/libasan.so.5+0xb857a)
#1 0x55e33d1071e5 in bgp_process_mac_rescan_table bgpd/bgp_mac.c:159
#2 0x55e33d107c09 in bgp_mac_rescan_evpn_table bgpd/bgp_mac.c:252
#3 0x55e33d107e39 in bgp_mac_rescan_all_evpn_tables bgpd/bgp_mac.c:266
#4 0x55e33d108270 in bgp_mac_remove_ifp_internal bgpd/bgp_mac.c:291
#5 0x55e33d108893 in bgp_mac_del_mac_entry bgpd/bgp_mac.c:351
#6 0x55e33d21412d in bgp_ifp_down bgpd/bgp_zebra.c:257
#7 0x7fe9b8cbf3be in if_down_via_zapi lib/if.c:198
#8 0x7fe9b8db303a in zclient_interface_down lib/zclient.c:1549
#9 0x7fe9b8db8a06 in zclient_read lib/zclient.c:2693
#10 0x7fe9b8d7b95a in thread_call lib/thread.c:1599
#11 0x7fe9b8cd824e in frr_run lib/libfrr.c:1024
#12 0x55e33d09d463 in main bgpd/bgp_main.c:477
#13 0x7fe9b879409a in __libc_start_main ../csu/libc-start.c:308
#14 0x55e33d09c189 in _start (/usr/lib/frr/bgpd+0x168189)
0x6020003ef850 is located 0 bytes inside of 16-byte region [0x6020003ef850,0x6020003ef860)
freed by thread T0 here:
#0 0x7fe9b8fabfb0 in __interceptor_free (/lib/x86_64-linux-gnu/libasan.so.5+0xe8fb0)
#1 0x7fe9b8ce4ea9 in qfree lib/memory.c:129
#2 0x55e33d10825c in bgp_mac_remove_ifp_internal bgpd/bgp_mac.c:289
#3 0x55e33d108893 in bgp_mac_del_mac_entry bgpd/bgp_mac.c:351
#4 0x55e33d21412d in bgp_ifp_down bgpd/bgp_zebra.c:257
#5 0x7fe9b8cbf3be in if_down_via_zapi lib/if.c:198
#6 0x7fe9b8db303a in zclient_interface_down lib/zclient.c:1549
#7 0x7fe9b8db8a06 in zclient_read lib/zclient.c:2693
#8 0x7fe9b8d7b95a in thread_call lib/thread.c:1599
#9 0x7fe9b8cd824e in frr_run lib/libfrr.c:1024
#10 0x55e33d09d463 in main bgpd/bgp_main.c:477
#11 0x7fe9b879409a in __libc_start_main ../csu/libc-start.c:308
previously allocated by thread T0 here:
#0 0x7fe9b8fac518 in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0xe9518)
#1 0x7fe9b8ce4d93 in qcalloc lib/memory.c:110
#2 0x55e33d106b29 in bgp_mac_hash_alloc bgpd/bgp_mac.c:96
#3 0x7fe9b8cb8350 in hash_get lib/hash.c:149
#4 0x55e33d10845b in bgp_mac_add_mac_entry bgpd/bgp_mac.c:303
#5 0x55e33d226757 in bgp_ifp_create bgpd/bgp_zebra.c:2644
#6 0x7fe9b8cbf1e6 in if_new_via_zapi lib/if.c:176
#7 0x7fe9b8db2d3b in zclient_interface_add lib/zclient.c:1481
#8 0x7fe9b8db87f8 in zclient_read lib/zclient.c:2659
#9 0x7fe9b8d7b95a in thread_call lib/thread.c:1599
#10 0x7fe9b8cd824e in frr_run lib/libfrr.c:1024
#11 0x55e33d09d463 in main bgpd/bgp_main.c:477
#12 0x7fe9b879409a in __libc_start_main ../csu/libc-start.c:308
Effectively we are passing to bgp_mac_remove_ifp_internal the macaddr
that is associated with the bsm data structure. There exists a path
where the bsm is freed and then we immediately pass the macaddr into
bgp_mac_rescan_all_evpn_tables. So just make a copy of the macaddr
data structure before we free the bsm
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add a dataplane plugin module as a sample or reference for
folks who might like to integrate with the zebra dataplane
subsystem. This isn't part of the FRR build or product; there
are some simple build and load-at-runtime instructions in
comments in the file.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
This allows to set motd from an input instead of creating a file.
Example:
root@exit2-debian-9:~/frr# telnet 127.0.0.1 2605
Trying 127.0.0.1...
Connected to 127.0.0.1.
Escape character is '^]'.
Hello, this is bgpd
User Access Verification
Password:
exit2-debian-9> enable
exit2-debian-9# sh run
Current configuration:
!
frr version 7.3-dev-MyOwnFRRVersion
frr defaults traditional
!
hostname exit2-debian-9
password belekas
log file /var/log/frr/labas.log
log syslog informational
banner motd line Hello, this is bgpd
!
!
!
line vty
!
end
exit2-debian-9#
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
