When you add a key chain in the RIP configuration file and reload the
configurations via the frr-reload.py script, the script will fail and
the key chain will not appear in the running configuration. The reason
is that frr-reload.py doesn't recognize key as a sub-context.
Before this change, keys were generated this way:
key chain test
key 2
key-string 123
key 3
key-string 456
With this change, keys will be generated this way:
key chain test
key 2
key-string 123
exit
key 3
key-string 456
exit
This will allow frr-reload.py to see the key sub-context and correctly
reload them.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
in ipv6 flowspec, a new type is defined to be able to do filtering rules
based on 20 bits flow label field as depicted in [0]. The change include
the decoding by flowspec, and the addition of a new attribute in policy
routing rule, so that the data is ready to be sent to zebra.
The commit also includes a check on fragment option, since dont fragment
bit does not exist in ipv6, the value should always be set to 0,
otherwise the flowspec rule becomes invalid.
[0] https://tools.ietf.org/html/draft-ietf-idr-flow-spec-v6-09
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
to recognize whether a flowspec prefix has been carried out by
ipv4 flowspec or ipv6 flowspec ( actually, the hypothesis is that only
ipv4 flowspec is supported), then a new attribute should contain the
family value: AF_INET or AF_INET6. That value will be further used in
the BGP flowspec code.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
In case of config rollback is enabled,
record northbound transaction based on a control flag.
The actual frr daemons would set the flag to true via
nb_init from frr_init.
This will allow test daemon to bypass recording
transacation to db.
Signed-off-by: Chirag Shah <chirag@nvidia.com>
The sorting for zapi nexthops in zapi routes needs to match
the sorting of nexthops done in zebra. Ensure all zapi_nexthop
attributes are included in the sort.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Sysrepo recently underwent a complete rewrite, where some substantial
architectural changes were made (the most important one being the
extinction of the sysrepod daemon). While most of the existing API
was preserved, quite a few backward-incompatible changes [1] were
introduced (mostly simplifications). This commit adapts our sysrepo
northbound plugin to those API changes in order for it to be compatible
with the latest Sysrepo version.
Additional notes:
* The old Sysrepo version is EOL and not supported anymore.
* The new Sysrepo version requires libyang 1.x.
Closes#6936
[1] https://github.com/sysrepo/sysrepo/blob/devel/CHANGES
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
During the prep phase to apply a northbound commit, if no changes were
detected make sure we fill the error message buffer to explain this.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
Fix a crash where if we issue a show run after a vrf has been
deleted we would crash here due to not null checking.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
While a configuration transaction can't be rejected once it reaches
the APPLY phase, we should allow NB callbacks to generate error
or warning messages when a configuration change is being applied.
That should be useful, for example, to return warnings back to
the user informing that the applied configuration has some kind of
inconsistency or is missing something in order to be effectively
activated. The infrastructure for this was already present, but the
northbound layer was ignoring all errors/warnings generated during
the apply/abort phases instead of returning them to the user. This
commit changes that.
In the gRPC plugin, extend the Commit() RPC adding a new
"error_message" field to the response type. This is necessary to
allow errors/warnings to be returned even when the commit operation
succeeds (since grpc::Status::OK doesn't support error messages
like the other status codes).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Use `args->errmsg` instead of just `zlog_info` for registering the error
so the users don't need to check their log files.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
We can make the Linux kernel send an ARP/NDP request by adding
a neighbour with the 'NUD_INCOMPLETE' state and the 'NTF_USE' flag.
This commit adds new dataplane operation as well as new zapi message
to allow other daemons send ARP/NDP requests.
Signed-off-by: Jakub Urbańczyk <xthaid@gmail.com>
There are situations where POLLERR will be returned. But
since we were not handling it. Thread processing effectively
is turned into an infinite loop, which is bad.
Modify the code so that if we receive a POLLERR we turn it
into a read event to be handled as an error from the handler
function.
This was discovered in pim:
Thread statistics for pimd:
Showing poll FD's for main
--------------------------
Count: 14/1024
0 fd: 9 events: 1 revents: 0 mroute_read
1 fd: 12 events: 1 revents: 0 vty_accept
2 fd: 13 events: 1 revents: 0 vtysh_accept
3 fd: 11 events: 1 revents: 0 zclient_read
4 fd: 15 events: 1 revents: 0 mroute_read
5 fd: 16 events: 1 revents: 0 mroute_read
6 fd: 17 events: 1 revents: 0 pim_sock_read
7 fd: 19 events: 1 revents: 0 pim_sock_read
8 fd: 21 events: 1 revents: 0 pim_igmp_read
9 fd: 22 events: 1 revents: 0 pim_sock_read
10 fd: 23 events: 1 revents: 0 pim_sock_read
11 fd: 20 events: 1 revents: 0 vtysh_read
12 fd: 18 events: 1 revents: 0 pim_sock_read
13 fd: 24 events: 0 revents: 0
strace was showing this line over and over and over:
poll([{fd=9, events=POLLIN}, {fd=12, events=POLLIN}, {fd=13, events=POLLIN}, {fd=11, events=POLLIN}, {fd=15, events=POLLIN}, {fd=16, events=POLLIN}, {fd=17, events=POLLIN}, {fd=19, events=POLLIN}, {fd=21, events=POLLIN}, {fd=22, events=POLLIN}, {fd=23, events=POLLIN}, {fd=20, events=POLLIN}, {fd=18, events=POLLIN}, {fd=6, events=POLLIN}], 14, 20) = 1 ([{fd=21, revents=POLLERR}])
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Somewhere along the way the indentation for comments got
all messed up. Let's make it follow our standards and
also look right too.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
For the sake of Segment Routing (SR) and Traffic Engineering (TE)
Policies there's a need for additional infrastructure within zebra.
The infrastructure in this PR is supposed to manage such policies
in terms of installing binding SIDs and LSPs. Also it is capable of
managing MPLS labels using the label manager, keeping track of
nexthops (for resolving labels) and notifying interested parties about
changes of a policy/LSP state. Further it enables a route map mechanism
for BGP and SR-TE colors such that learned BGP routes can be mapped
onto SR-TE Policies.
This PR does not introduce any usable features by now, it is just
infrastructure for other upcoming PRs which will introduce 'pathd',
a new SR-TE daemon.
Co-authored-by: Renato Westphal <renato@opensourcerouting.org>
Co-authored-by: GalaxyGorilla <sascha@netdef.org>
Signed-off-by: Sebastien Merle <sebastien@netdef.org>
1. BGP informs zebra if a MAC-IP is a SYNC path and if it active on the
ES peer.
2. Zebra sends paths that are "local-inactive" with the proxy flag to
BGP.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
The `struct evpn_ead_addr` structure had a prefix length
associated with it. This value was only ever set never
used. Remove this from our system. The other
nice thing about this change is that it puts back
the sizeof struct route_node to 192 bytes.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
1. Local ethernet segments are configured in zebra by attaching a
local-es-id and sys-mac to a access interface -
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
!
interface hostbond1
evpn mh es-id 1
evpn mh es-sys-mac 00:00:00:00:01:11
!
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
This info is then sent to BGP and used for the generation of EAD-per-ES
routes.
2. Access VLANs associated with an (ES) access port are translated into
ES-EVI objects and sent to BGP. This is used by BGP for the
generation of EAD-EVI routes.
3. Remote ESs are imported by BGP and sent to zebra. A list of VTEPs
is maintained per-remote ES in zebra. This list is used for the creation
of the L2-NHG that is used for forwarding traffic.
4. MAC entries with a non-zero ESI destination use the L2-NHG associated
with the ESI for forwarding traffic over the VxLAN overlay.
Please see zebra_evpn_mh.h for the datastruct organization details.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
This is the base patch that brings in support for Type-1 routes.
It includes support for -
- Ethernet Segment (ES) management
- EAD route handling
- MAC-IP (Type-2) routes with a non-zero ESI i.e. Aliasing for
active-active multihoming
- Initial infra for consistency checking. Consistency checking
is a fundamental feature for active-active solutions like MLAG.
We will try to levarage the info in the EAD-ES/EAD-EVI routes to
detect inconsitencies in access config across VTEPs attached to
the same Ethernet Segment.
Functionality Overview -
========================
1. Ethernet segments are created in zebra and associated with
access VLANs. zebra sends that info as ES and ES-EVI objects to BGP.
2. BGP advertises EAD-ES and EAD-EVI routes for the locally attached
ethernet segments.
3. Similarly BGP processes EAD-ES and EAD-EVI routes from peers
and translates them into ES-VTEP objects which are then sent to zebra
as remote ESs.
4. Each ES in zebra is associated with a list of active VTEPs which
is then translated into a L2-NHG (nexthop group). This is the ES
"Alias" entry
5. MAC-IP routes with a non-zero ESI use the alias entry created in
(4.) to forward traffic i.e. a MAC-ECMP is done to these remote-ES
destinations.
EAD route management (route table and key) -
============================================
1. Local EAD-ES routes
a. route-table: per-ES route-table
key: {RD=ES-RD, ESI, ET=0xffffffff, VTEP-IP)
b. route-table: per-VNI route-table
Not added
c. route-table: global route-table
key: {RD=ES-RD, ESI, ET=0xffffffff)
2. Remote EAD-ES routes
a. route-table: per-ES route-table
Not added
b. route-table: per-VNI route-table
key: {RD=ES-RD, ESI, ET=0xffffffff, VTEP-IP)
c. route-table: global route-table
key: {RD=ES-RD, ESI, ET=0xffffffff)
3. Local EAD-EVI routes
a. route-table: per-ES route-table
Not added
b. route-table: per-VNI route-table
key: {RD=0, ESI, ET=0, VTEP-IP)
c. route-table: global route-table
key: {RD=L2-VNI-RD, ESI, ET=0)
4. Remote EAD-EVI routes
a. route-table: per-ES route-table
Not added
b. route-table: per-VNI route-table
key: {RD=0, ESI, ET=0, VTEP-IP)
c. route-table: global route-table
key: {RD=L2-VNI-RD, ESI, ET=0)
Please refer to bgp_evpn_mh.h for info on how the data-structures are
organized.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
This api was earlier present in the daemon code but as multiple daemons
need it moving it to lib will avoid unnecessary copy-paste.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
In the global evpn routing table RD is part of the key. However in the
per-VNI routing table the key doesn't include the RD and we need more
than the ESI to distinguish between EAD routes from different VTEPs
attached to the same Ethernet Segment.
This commit also includes other definitions needed for managing an
ESI.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
In most cases this memory is pre-allocated along with the base element.
Similarly it is stored in the base element to allow efficient del
without lookup (main reason for using DLL vs. SLL).
So (in most cases) there should be no need to manage the element/data
and listnode memories separately.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
New macros have been added for the following -
1. to efficiently iterate and execute functions on already set bits
2. to check if a bit is in use
3. to check if a bitfield has been initialized (this is to safetly
handle cases where the bitfield is freed and re-allocated).
4. to check if two bitfields have the same bits set
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Revert "zebra: support for macvlan interfaces"
This reverts commit bf69e212fd.
Revert "doc: add some documentation about bgp evpn netns support"
This reverts commit 89b97c33d7.
Revert "zebra: dynamically detect vxlan link interfaces in other netns"
This reverts commit de0ebb2540.
Revert "bgpd: sanity check when updating nexthop from bgp to zebra"
This reverts commit ee9633ed87.
Revert "lib, zebra: reuse and adapt ns_list walk functionality"
This reverts commit c4d466c830.
Revert "zebra: local mac entries populated in correct netnamespace"
This reverts commit 4042454891.
Revert "zebra: when parsing local entry against dad, retrieve config"
This reverts commit 3acc394bc5.
Revert "bgpd: evpn nexthop can be changed by default"
This reverts commit a2342a2412.
Revert "zebra: zvni_map_to_vlan() adaptation for all namespaces"
This reverts commit db81d18647.
Revert "zebra: add ns_id attribute to mac structure"
This reverts commit 388d5b438e.
Revert "zebra: bridge layer2 information records ns_id where bridge is"
This reverts commit b5b453a2d6.
Revert "zebra, lib: new API to get absolute netns val from relative netns val"
This reverts commit b6ebab34f6.
Revert "zebra, lib: store relative default ns id in each namespace"
This reverts commit 9d3555e06c.
Revert "zebra, lib: add an internal API to get relative default nsid in other ns"
This reverts commit 97c9e7533b.
Revert "zebra: map vxlan interface to bridge interface with correct ns id"
This reverts commit 7c990878f2.
Revert "zebra: fdb and neighbor table are read for all zns"
This reverts commit f8ed2c5420.
Revert "zebra: zvni_map_to_svi() adaptation for other network namespaces"
This reverts commit 2a9dccb647.
Revert "zebra: display interface slave type"
This reverts commit fc3141393a.
Revert "zebra: zvni_from_svi() adaptation for other network namespaces"
This reverts commit 6fe516bd4b.
Revert "zebra: importation of bgp evpn rt5 from vni with other netns"
This reverts commit 28254125d0.
Revert "lib, zebra: update interface name at netlink creation"
This reverts commit 1f7a68a2ff.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
