When Zebra receives the netconf update an afi is passed
let's seperate that out and track the v4/v6 specific data
to save and store appropriately.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The mc_forwarding status for an interface was being sent but not
properly retrieved on the zebra master side of the dplane.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Move a few things into places they actually belong, and reduce the
number of places we have `#ifdev HAVE_RTADV`. Just overall code
prettification.
... I had actually done this quite a while ago while doing some other
random hacking and thought it more useful to not be sitting on it on my
disk...
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
In the FreeBSD code if you delete the interface
and it has no configuration, the ifp pointer will
be deleted from the system *but* zebra continues
to dereference the just freed pointer.
==58624== Invalid read of size 1
==58624== at 0x48539F3: strlcpy (in /usr/local/libexec/valgrind/vgpreload_memcheck-amd64-freebsd.so)
==58624== by 0x2B0565: ifreq_set_name (ioctl.c:48)
==58624== by 0x2B0565: if_get_flags (ioctl.c:416)
==58624== by 0x2B2D9E: ifan_read (kernel_socket.c:455)
==58624== by 0x2B2D9E: kernel_read (kernel_socket.c:1403)
==58624== by 0x499F46E: thread_call (thread.c:2002)
==58624== by 0x495D2B7: frr_run (libfrr.c:1196)
==58624== by 0x2B40B8: main (main.c:471)
==58624== Address 0x6baa7f0 is 64 bytes inside a block of size 432 free'd
==58624== at 0x484ECDC: free (in /usr/local/libexec/valgrind/vgpreload_memcheck-amd64-freebsd.so)
==58624== by 0x4953A64: if_delete (if.c:283)
==58624== by 0x2A93C1: if_delete_update (interface.c:874)
==58624== by 0x2B2DF3: ifan_read (kernel_socket.c:453)
==58624== by 0x2B2DF3: kernel_read (kernel_socket.c:1403)
==58624== by 0x499F46E: thread_call (thread.c:2002)
==58624== by 0x495D2B7: frr_run (libfrr.c:1196)
==58624== by 0x2B40B8: main (main.c:471)
==58624== Block was alloc'd at
==58624== at 0x4851381: calloc (in /usr/local/libexec/valgrind/vgpreload_memcheck-amd64-freebsd.so)
==58624== by 0x496A022: qcalloc (memory.c:116)
==58624== by 0x49546BC: if_new (if.c:164)
==58624== by 0x49546BC: if_create_name (if.c:218)
==58624== by 0x49546BC: if_get_by_name (if.c:603)
==58624== by 0x2B1295: ifm_read (kernel_socket.c:628)
==58624== by 0x2A7FB6: interface_list (if_sysctl.c:129)
==58624== by 0x2E99C8: zebra_ns_enable (zebra_ns.c:127)
==58624== by 0x2E99C8: zebra_ns_init (zebra_ns.c:214)
==58624== by 0x2B3FF2: main (main.c:401)
==58624==
Zebra needs to pass back whether or not the ifp pointer
was freed when if_delete_update is called and it should
then check in ifan_read as well as ifm_read that the
ifp pointer is still valid for use.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Extern the api for setting the protodown reason code
bitfield directly. Some places may want to completely update the
bitfield with more than one reason at a time.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Add functionality to clear any reason code set on shutdown
of zebra when we are freeing the interface, in case a bad
client didn't tell us to clear it when the shutdown.
Also, in case of a crash or failure to do the above, clear reason
on startup if it is set.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Add enums for set/unset of prodown state to handle the mainthread
knowing an update is already queued without actually marking it
as complete.
This is to make the logic confirm a bit more with other parts of the code
where we queue dplane updates and not update our internal structs until
success callback is received.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Add support for setting the protodown reason code.
829eb208e8
These patches handle all our netlink code for setting the reason.
For protodown reason we only set `frr` as the reason externally
but internally we have more descriptive reasoning available via
`show interface IFNAME`. The kernel only provides a bitwidth of 32
that all userspace programs have to share so this makes the most sense.
Since this is new functionality, it needs to be added to the dplane
pthread instead. So these patches, also move the protodown setting we
were doing before into the dplane pthread. For this, we abstract it a
bit more to make it a general interface LINK update dplane API. This
API can be expanded to support gernal link creation/updating when/if
someone ever adds that code.
We also move a more common entrypoint for evpn-mh and from zapi clients
like vrrpd. They both call common code now to set our internal flags
for protodown and protodown reason.
Also add debugging code for dumping netlink packets with
protodown/protodown_reason.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
With recent changes to interface up mechanics in if_netlink.c
FRR was receiving as many as 4 up events for an interface
on ifdown/ifup events. This was causing timing issues
in FRR based upon some fun timings. Remove this from
happening.
Ticket: CM-31623
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
There exists some interface types that are slow on startup
to fully register their link speed. Especially those that
are working with an asic backend. The speed_update timer
associated with each interface would keep trying if the
system returned a MAX_UINT32 as the speed. This speed
means both unknown or there is none under linux.
Since some interface types are slow on startup let's modify
FRR to try for at most 4 minutes and give up trying on those
interfaces where we never get any useful data.
Why 4 minutes? I wanted to balance the time associated with
slow interfaces coming up with those that will never give us
a value. So I choose 4 minutes as a good ballpark of time
to keep trying
Why not track all those interfaces and just not attempt to
do the speed lookup? I would prefer to not keep track of these
as that I do not know all the interface types, nor do I wish
to keep programming as new ones come in.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Use the dataplane to query and read interface NETCONF data;
add netconf-oriented data to the dplane context object, and
add accessors for it. Add handler for incoming update
processing.
Signed-off-by: Mark Stapp <mstapp@nvidia.com>
RA packets are pretty chatty and when there is a warning from
a missconfiguration on the network, the log file gets filed
up with warnings. Modify the code in rtadv.c to only spit
out the warning in these cases at most every 6 hours.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Read incoming interface address change notifications in the
dplane pthread; enqueue the events to the main pthread
for processing. This is netlink-only for now - the bsd
kernel socket path remains unchanged.
Signed-off-by: Mark Stapp <mjs.ietf@gmail.com>
zebra is able to get information about gre tunnels.
zebra_gre file is created to handle hooks, but is not yet used.
also, debug zebra gre command is done to add gre traces.
A zebra_gre file is used for complementary actions that may be needed.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
when zebra has vrf backend mapped to namespaces, the polling
of interfaces leads to fix all linkages of interfaces. This
was not done on non default namespace. do it for other namespaces.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
When an ES-bond comes out of bypass FRR needs to flush the local MACs learnt
while the bond was in bypass. To do that efficiently local MACs are linked
to the dest-access port. This only happens if the access-port is in
LACP-bypass or if it is non-ES.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Feature overview:
=================
A 802.3ad bond can be setup to allow lacp-bypass. This is done to enable
servers to pxe boot without a LACP license i.e. allows the bond to go oper
up (with a single link) without LACP converging.
If an ES-bond is oper-up in an "LACP-bypass" state MH treats it as a non-ES
bond. This involves the following special handling -
1. If the bond is in a bypass-state the associated ES is placed in a
bypass state.
2. If an ES is in a bypass state -
a. DF election is disabled (i.e. assumed DF)
b. SPH filter is not installed.
3. MACs learnt via the host bond are advertised with a zero ESI.
When the ES moves out of "bypass" the MACs are moved from a zero-ESI to
the correct non-zero id. This is treated as a local station move.
Implementation:
===============
When (a) an ES is detached from a hostbond or (b) an ES-bond goes into
LACP bypass zebra deletes all the local macs (with that ES as destination)
in the kernel and its local db. BGP re-sends any imported MAC-IP routes
that may exist with this ES destination as remote routes i.e. zebra can
end up programming a MAC that was perviously local as remote pointing
to a VTEP-ECMP group.
When an ES is attached to a hostbond or an ES-bond goes
LACP-up (out of bypss) zebra again deletes all the local macs in the
kernel and its local db. At this point BGP resends any imported MAC-IP
routes that may exist with this ES destination as sync routes i.e.
zebra can end up programming a MAC that was perviously remote
as local pointing to an access port.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Earlier type-3 ESI was the only format supported for evpn-mh. Updated the
CLI to allow a 10-byte type-0 ESI.
Both type-0 and type-3 ESIs are statically configured; just in two different
ways -
1. type-0 is configured as a complete 10-byte string
2. type-3 is configured as a 6-byte es-sys-mac and a 3-byte
local-discriminator.
Sample config -
!
interface hostbond1
evpn mh es-id 00:44:38:39:ff:ff:01:00:00:01
!
This is a CLI-only change and has no functional impact.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Local ethernet segments are held in a protodown or error-disabled state
if access to the VxLAN overlay is not ready -
1. When FRR comes up the local-ESs/access-port are kept protodown
for the startup-delay duration. During this time the underlay and
EVPN routes via it are expected to converge.
2. When all the uplinks/core-links attached to the underlay go down
the access-ports are similarly protodowned.
The ES-bond protodown state is propagated to each ES-bond member
and programmed in the dataplane/kernel (per-bond-member).
Configuring uplinks -
vtysh -c "conf t" vtysh -c "interface swp4" vtysh -c "evpn mh uplink"
Configuring startup delay -
vtysh -c "conf t" vtysh -c "evpn mh startup-delay 100"
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
EVPN protodown display -
========================
root@torm-11:mgmt:~# vtysh -c "show evpn"
L2 VNIs: 10
L3 VNIs: 3
Advertise gateway mac-ip: No
Advertise svi mac-ip: No
Duplicate address detection: Disable
Detection max-moves 5, time 180
EVPN MH:
mac-holdtime: 60s, neigh-holdtime: 60s
startup-delay: 180s, start-delay-timer: 00:01:14 <<<<<<<<<<<<
uplink-cfg-cnt: 4, uplink-active-cnt: 4
protodown: startup-delay <<<<<<<<<<<<<<<<<<<<<<<
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
ES-bond protodown display -
===========================
root@torm-11:mgmt:~# vtysh -c "show interface hostbond1"
Interface hostbond1 is up, line protocol is down
Link ups: 0 last: (never)
Link downs: 1 last: 2020/04/26 20:38:03.53
PTM status: disabled
vrf: default
OS Description: Local Node/s torm-11 and Ports swp5 <==> Remote Node/s hostd-11 and Ports swp1
index 58 metric 0 mtu 9152 speed 4294967295
flags: <UP,BROADCAST,MULTICAST>
Type: Ethernet
HWaddr: 00:02:00:00:00:35
Interface Type bond
Master interface: bridge
EVPN-MH: ES id 1 ES sysmac 00:00:00:00:01:11
protodown: off rc: startup-delay <<<<<<<<<<<<<<<<<
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
ES-bond member protodown display -
==================================
root@torm-11:mgmt:~# vtysh -c "show interface swp5"
Interface swp5 is up, line protocol is down
Link ups: 0 last: (never)
Link downs: 3 last: 2020/04/26 20:38:03.52
PTM status: disabled
vrf: default
index 7 metric 0 mtu 9152 speed 10000
flags: <UP,BROADCAST,MULTICAST>
Type: Ethernet
HWaddr: 00:02:00:00:00:35
Interface Type Other
Master interface: hostbond1
protodown: on rc: startup-delay <<<<<<<<<<<<<<<<
root@torm-11:mgmt:~#
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
1. DF preference is configurable per-ES
!
interface hostbond1
evpn mh es-df-pref 100 >>>>>>>>>>>
evpn mh es-id 1
evpn mh es-sys-mac 00:00:00:00:01:11
!
2. This parameter is sent to BGP and advertised via the ESR.
3. The peer-ESs' DF params are sent to zebra (by BGP) and used
for running the DF election.
4. If the local VTEP becomes non-DF on an ES a block filter is
programmed in the dataplane to drop de-capsulated BUM packets
destined to that ES.
Sample output
=============
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
torm-11# sh evpn es
Type: L local, R remote, N non-DF
ESI Type ES-IF VTEPs
03:00:00:00:00:01:11:00:00:01 LRN hostbond1 27.0.0.16
03:00:00:00:00:01:22:00:00:02 LR hostbond2 27.0.0.16
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
torm-11# sh evpn es 03:00:00:00:00:01:11:00:00:01
ESI: 03:00:00:00:00:01:11:00:00:01
Type: Local,Remote
Interface: hostbond1
State: up
Ready for BGP: yes
VNI Count: 10
MAC Count: 2
DF: status: non-df preference: 100 >>>>>>>>
Nexthop group: 0x2000001
VTEPs:
27.0.0.16 df_alg: preference df_pref: 32767 nh: 0x100000d >>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
The Solaris code has gone through a deprecation cycle. No-one
has said anything to us and worse of all we don't have any test
systems running Solaris to know if we are making changes that
are breaking on Solaris. Remove it from the system so
we can clean up a bit.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
1. Local ethernet segments are configured in zebra by attaching a
local-es-id and sys-mac to a access interface -
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
!
interface hostbond1
evpn mh es-id 1
evpn mh es-sys-mac 00:00:00:00:01:11
!
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
This info is then sent to BGP and used for the generation of EAD-per-ES
routes.
2. Access VLANs associated with an (ES) access port are translated into
ES-EVI objects and sent to BGP. This is used by BGP for the
generation of EAD-EVI routes.
3. Remote ESs are imported by BGP and sent to zebra. A list of VTEPs
is maintained per-remote ES in zebra. This list is used for the creation
of the L2-NHG that is used for forwarding traffic.
4. MAC entries with a non-zero ESI destination use the L2-NHG associated
with the ESI for forwarding traffic over the VxLAN overlay.
Please see zebra_evpn_mh.h for the datastruct organization details.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reported by testing agency that rfc 4861 section 6.2.1 states
that all implementations must have a configuration knob to change
the setting of the advertised hop limit. This fix adds that
capability.
Ticket: CM-29200
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Problem reported by testing facility that our sending of Router
Advertisements more frequently than once very three seconds is not
compliant with rfc4861. Added a knob to turn off fast retransmits
in order to meet the requirement of the RFC.
Ticket: CM-27063
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Add a private header file for functions that are internal/special
case like how we do it for `lib/nexthop_group_private.h`.
Remove a bunch of functions from the header file only being used
statically and add some comments for those remaining to indicate
better what their use is.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Switch the nhg_connected tree structures to use the new
RB tree API in `lib/typerb.h`. We were using the openbsd-tree
implementation before.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
We will use a nhe context for dataplane interaction with
nextho group hash entries.
New nhe's from the kernel will be put into a group array
if they are a group and queued on the rib metaq to be processed
later.
New nhe's sent to the kernel will be set on the dataplane context
with approprate ID's in the group array if needed.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Re-organize and expose the nhg_connected functions so that
it can be used outside zebra_nhg.c. And then abstract those
into zebra_nhg_depends_* and zebra_nhg_depenents_* functons.
Switch the ifp struct to use an RB tree for its dependents,
making use of the nhg_connected functions.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add an interface pointer for an nexthop group hash entry
when we are getting a rib_add for a new route.
Also, add the interface index to the `show nexthop-group` command.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add a nexthop hash entry list to the local zebra
interface info for each interface. This will allow
us to modify nexthops on link events.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
The alias/description of an interface in linux was being
used to override the internal description. As such let's
fix the display to keep track of both if we have it.
Config in FRR:
!
interface docker0
description another combination
!
interface enp3s0
description BAMBOOZLE ME WILL YOU
!
Config in linux:
sharpd@robot ~/f/zebra> ip link show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
alias This is the loopback you cabbage
2: enp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000
link/ether 74:d0:2b:9c:16:eb brd ff:ff:ff:ff:ff:ff
alias HI HI HI
Now the 'show int descr' command:
robot# show int description
Interface Status Protocol Description
docker0 up down another combination
enp3s0 up up BAMBOOZLE ME WILL YOU
HI HI HI
lo up up This is the loopback you cabbage
Fixes: #4191
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The interface type can be a bond or a bond slave, add some
code to note this and to display it as part of a show interface
command.
Signed-off-by: Dinesh Dutt <didutt@gmail.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Abstract the mac neigh installation for 169.254.0.1 into
it's own function that we can pass the mac address into.
This will allow a future commit to use this functionality
when we have the appropriate mac address from reading
optional attributes of a RA packet.
Signed-off-by: Donald Sharp <sharpd@cumuusnetworks.com>
