The fact that the interface name is used in some nexthop config doesn't
mean that the interface is configured.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
There is a possibility that the same line can be matched as a command in
some node and its parent node. In this case, when reading the config,
this line is always executed as a command of the child node.
For example, with the following config:
```
router ospf
network 193.168.0.0/16 area 0
!
mpls ldp
discovery hello interval 111
!
```
Line `mpls ldp` is processed as command `mpls ldp-sync` inside the
`router ospf` node. This leads to a complete loss of `mpls ldp` node
configuration.
To eliminate this issue and all possible similar issues, let's print an
explicit "exit" at the end of every node config.
This commit also changes indentation for a couple of existing exit
commands so that all existing commands are on the same level as their
corresponding node-entering commands.
Fixes#9206.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Back when I put this together in 2015, ISO C11 was still reasonably new
and we couldn't require it just yet. Without ISO C11, there is no
"good" way (only bad hacks) to require a semicolon after a macro that
ends with a function definition. And if you added one anyway, you'd get
"spurious semicolon" warnings on some compilers...
With C11, `_Static_assert()` at the end of a macro will make it so that
the semicolon is properly required, consumed, and not warned about.
Consistently requiring semicolons after "file-level" macros matches
Linux kernel coding style and helps some editors against mis-syntax'ing
these macros.
Signed-off-by: David Lamparter <equinox@diac24.net>
Remove the nexthop_same_firsthop() api and just call nexthop_same().
Not entirely sure why we were using this function in the first place,
but now we are just marking dupes with it so lets just call a
common function and avoid issues.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add a command `set installable` that allows configured nexthop
groups to be treated as separate/installable objects in the RIB.
A callback needs to be implemented per daemon to handle installing
the NHG into the rib via zapi when this command is set. This
patch includes the implementation for sharpd.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
If we have an interface configured in a daemon on shutdown
store the old ifindex value for retrieval on when it is
possibly recreated.
This is especially important for nexthop groups as that we
had at one point in time the ability to restore the
configuration but it was lost when we started deleting
all deleted interfaces. We need the nexthop group subsystem
to also mark that it has configured an interface.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The nexthop_group_write_nexthop_simple function outputs the
interface name, because we've stored the ifindex. The problem
is that there are ephermeal interfaces in linux that can be
destroyed/recreated. Allow us to keep that data and do something
a bit smarter to allow show run's and other show commands to continue
to work when the interface is deleted.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Not everything cares about the vrf and backup info. Break
up the API to add a simple version to just write gateway/interface
info.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Fix a crash where if we issue a show run after a vrf has been
deleted we would crash here due to not null checking.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Initial changes to support a nexthop with multiple backups. Lib
changes to hold a small array in each primary, zapi message
changes to support sending multiple backups, and daemon
changes to show commands to support multiple backups. The config
input for multiple backup indices is not present here.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Revise new `show pbr` keys to be consistent with existing
json in other daemons
target->nexthop
id->tableId (where relevant)
isValid->valid
isInstalled->installed
Signed-off-by: Wesley Coakley <wcoakley@cumulusnetworks.com>
Increased the verbosity of the json keys and flattened the returned
structure by removing superfluous keys.
Signed-off-by: Wesley Coakley <wcoakley@cumulusnetworks.com>
And again for the name. Why on earth would we centralize this, just so
people can forget to update it?
Signed-off-by: David Lamparter <equinox@diac24.net>
Same as before, instead of shoving this into a big central list we can
just put the parent node in cmd_node.
Signed-off-by: David Lamparter <equinox@diac24.net>
There is really no reason to not put this in the cmd_node.
And while we're add it, rename from pointless ".func" to ".config_write".
[v2: fix forgotten ldpd config_write]
Signed-off-by: David Lamparter <equinox@diac24.net>
The only nodes that have this as 0 don't have a "->func" anyway, so the
entire thing is really just pointless.
Signed-off-by: David Lamparter <equinox@diac24.net>
Use more limited matching logic so that nexthops within a
nexthop-group are unique based only on vrf, type, and gateway.
Treat configuration of a nexthop that matches an existing
nexthop as a replace operation.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Use const with some args to ipaddr, zebra vxlan, mpls
lsp, and nexthop apis; add some extra checks to some
nexthop-related apis.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
If someone tries to add a nexthop with a list of nexthops
already attached to it, let's just assert. This standardizes
the API to say we assume this is an individual nexthop
you are appending to a group.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Make the nexthop_copy/nexthop_dup APIs more consistent by
adding a secondary, non-recursive, version of them. Before,
it was inconsistent whether the APIs were expected to copy
recursive info or not. Make it clear now that the default is
recursive info is copied unless the _no_recurse() version is
called. These APIs are not heavily used so it is fine to
change them for now.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add an api that creates a copy of a list of nexthops and
enforces the canonical sort ordering; consolidate some nhg
code to avoid copy-and-paste. The zebra dplane uses
that api when a plugin sets up a list of nexthops, ensuring
that the plugin's list is ordered when it's processed in
zebra.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Add the ability to read in the weight of a nexthop and store/handle
it appropriately
nexthop-group BLUE
nexthop 192.168.201.44 weight 33
nexthop 192.168.201.45 weight 66
nexthop 192.168.201.46 weight 99
Is appropriately read in and handled as appropriate.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Replace the existing list of nexthops (via a nexthop_group
struct) in the route_entry with a direct pointer to zebra's
new shared group (from zebra_nhg.h). This allows more
direct access to that shared group and the info it carries.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Add support for labelled nexthops in nexthop-group
vtysh configuration. Also update the PBR doc where
the cli is described.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Reduce the api for deleting nexthops and the containing
group to just one call rather than having a special case
and handling it separately.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add a common handler function for the different nexthop_group_equal*()
comparison functions.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add NULL checks in `nexthop_group_equal*()` iteration
before calling `nexthop_same()` to make Clang SA happy.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Logic error on the second null check for nexthop groups
passed to the `nexthop_group_equal*() functions. This fixes it.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Separate nexthop_group_equal() into two versions. One
that compares verses recurisvely resolved nexthops and
one that doesn't.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
We were waiting until install time to mark nexthops as duplicate.
Since they are immutable now and re-used, move this marking into
when they are actually created to save a bunch of cycles.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Speed up nexthop_group_equal() by making it assume the
groups it has been passed are ordered. This should always
be the case.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Include resolved nexthops when hashing a nexthop
group but provide an API that allows you to non-recursively
hash as well.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
