Let's just use THREAD_OFF consistently in the code base
instead of each daemon having a special macro that needs to
be looked at and remembered what it does.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
convert:
frr_with_mutex(..)
to:
frr_with_mutex (..)
To make all our code agree with what clang-format is going to produce
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
==175785== 0 bytes in 1 blocks are definitely lost in loss record 1 of 88
==175785== at 0x483DD99: calloc (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
==175785== by 0x492EB8E: qcalloc (in /usr/local/lib/libfrr.so.0.0.0)
==175785== by 0x269823: bgp_notify_decapsulate_hard_reset (in /usr/lib/frr/bgpd)
==175785== by 0x26C85D: bgp_notify_receive (in /usr/lib/frr/bgpd)
==175785== by 0x26E94E: bgp_process_packet (in /usr/lib/frr/bgpd)
==175785== by 0x4985349: thread_call (in /usr/local/lib/libfrr.so.0.0.0)
==175785== by 0x491D521: frr_run (in /usr/local/lib/libfrr.so.0.0.0)
==175785== by 0x1EBEE8: main (in /usr/lib/frr/bgpd)
==175785==
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Related: https://datatracker.ietf.org/doc/html/draft-ietf-idr-bfd-subcode
When BFD Down notification comes and BGP is configured to track on BFD events,
send BGP Cease/BFD Down notification to the peer.
If RFC 8538 is enabled (Notification support for Graceful-Restart), notification
should be encapsulated into Hard Reset message.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
As described by
https://www.ietf.org/archive/id/draft-spaghetti-idr-bgp-sendholdtimer-04.html
Since this replicates the HoldTime check on the receiver that is already
part of the protocol, I do not believe it necessary to wait for IETF
progress on this draft. It's just replicating an existing element of
the protocol at the other side of the session.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
If we receive CEASE Notification or HOLDTIME notification, retain STALE
routes if it's not a CEASE/Hard Reset.
When doing `clear ip bgp PEER`, we can control if this would be CEASE/Hard Reset
or not by using `bgp hard-administrative-reset` knob.
When `bgp graceful-restart notification` is disabled, STALE routes won't be
retained when receiving Notification message.
Co-authored-by: Biswajit Sadhu <biswajit.sadhu@gmail.com>
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Also, add N-Bit (Notification) flag for Graceful Restart.
This is a preparation for RFC8538.
More information: https://datatracker.ietf.org/doc/html/rfc8538
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
The compiler is, rightly, pointing out that in some cases it is
possible that the pkt_afi and pkt_safi values are not properly
set and could result in a use before initialized. I do not
actually belive that this is possible, but let's make the compiler
happy.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
sockopt_cork is a no-op function that was cleaned up
in 2017. Since then it's still not being used. At
this point in time there is little point in keeping a
dead function that will not be used because of vagaries
between platforms
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The paf data structure is stored based upon an internal
bgp enum. The code is looking over all AFI/SAFI's and
doing a paf_af_find which then calls afindex to find
the right paf structure. Let's just loop over the
peer->peer_af_array[] and cut straight to the chase.
Under some loads the paf_af_find was taking up 6%
of the run time. This removes it entirely.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
We are inconsistently using peer_establiahed(peer) with
sometimes using `peer->status == Established`. Just Convert
over to using the function for consistency.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
BGP_MAX_PACKET_SIZE no longer represented the absolute maximum BGP
packet size as it did before, instead it was defined as 4096 bytes,
which is the maximum unless extended message capability is negotiated,
in which case the maximum goes to 65k.
That introduced at least one bug - last_reset_cause was undersized for
extended messages, and when sending an extended message > 4096 bytes
back to a peer as part of NOTIFY data would trigger a bounds check
assert.
This patch redefines the macro to restore its previous meaning,
introduces a new macro - BGP_STANDARD_MESSAGE_MAX_PACKET_SIZE - to
represent the 4096 byte size, and renames the extended size to
BGP_EXTENDED_MESSAGE_MAX_PACKET_SIZE for consistency. Code locations
that definitely should use the small size have been updated, locations
that semantically always need whatever the max is, no matter what that
is, use BGP_MAX_PACKET_SIZE.
BGP_EXTENDED_MESSAGE_MAX_PACKET_SIZE should only be used as a constant
when storing what the negotiated max size is for use at runtime and to
define BGP_MAX_PACKET_SIZE. Unless there is a future standard that
introduces a third valid size it should not be used for any other
purpose.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
Delay setting local data about a remote peer until after BGP
has decided to allow an open connection to proceed.
Modifying local peer data structures based upon what is
received from a peer should not be done until after BGP
has decided that the open is allowed to proceed.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add a handler for socket errors that runs in the main pthread,
rather than the io pthread. When the io pthread encounters a
read error, capture the error and schedule a task for the main
pthread.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
```
2523558-==2523558==
2523558-==2523558== Conditional jump or move depends on uninitialised value(s)
2523558:==2523558== at 0x47F242: bgp_notify_admin_message (bgp_debug.c:505)
2523558-==2523558== by 0x47F242: bgp_notify_print (bgp_debug.c:534)
2523558-==2523558== by 0x4BA9BC: bgp_notify_receive (bgp_packet.c:1905)
2523558-==2523558== by 0x4BA9BC: bgp_process_packet (bgp_packet.c:2602)
2523558-==2523558== by 0x4904B7E: thread_call (thread.c:1681)
2523558-==2523558== by 0x48CAA27: frr_run (libfrr.c:1126)
2523558-==2523558== by 0x474B1A: main (bgp_main.c:540)
2523558-==2523558== Uninitialised value was created by a stack allocation
2523558:==2523558== at 0x4BA33D: bgp_process_packet (bgp_packet.c:2529)
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
This was somewhy under bgp_debug_udpate() guard and others are under
bgp_debug_neighbor_events().
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Reference: https://www.cmand.org/communityexploration
--y2--
/ | \
c1 ---- x1 ---- y1 | z1
\ | /
--y3--
1. z1 announces 192.168.255.254/32 to y2, y3.
2. y2 and y3 tags this prefix at ingress with appropriate
communities 65004:2 (y2) and 65004:3 (y3).
3. x1 filters all communities at the egress to c1.
4. Shutdown the link between y1 and y2.
5. y1 will generate a BGP UPDATE message regarding the next-hop change.
6. x1 will generate a BGP UPDATE message regarding community change.
To avoid sending duplicate BGP UPDATE messages we should make sure
we send only actual route updates. In this example, x1 will skip
BGP UPDATE to c1 because the actual route is the same
(filtered communities - nothing changes).
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Current code when we are establishing a peering relationship when
under the HAVE_CUMULUS block will dissallow v4/v6 connections if
we do not have v4/v6 addresses applied. This restriction is
a bit harsh and should be allowed but warned against.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Move the FOREACH_AFI_SAFI macro from bgpd.h to zebra.h( GLOBAL's YOUALL )
Then convert all the places that have the two level for loop to
iterate over all afi/safis
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Sample Configuration with prefix-list and community match rules
---------------------------------------------------------------
R1 ------- R2(DUT) ------- R3
Router2# show running-config
Building configuration...
Current configuration:
!
frr version 7.6-dev-MyOwnFRRVersion
frr defaults traditional
hostname router
log file /var/log/frr/bgpd.log
log syslog informational
hostname Router2
service integrated-vtysh-config
!
debug bgp updates in
debug bgp updates out
!
debug route-map
!
ip route 20.20.0.0/16 blackhole
ipv6 route 2001:db8::200/128 blackhole
!
interface enp0s9
ip address 10.10.10.2/24
!
interface enp0s10
ip address 10.10.20.2/24
!
interface lo
ip address 2.2.2.2/32
!
router bgp 2
bgp log-neighbor-changes
no bgp ebgp-requires-policy
neighbor 10.10.10.1 remote-as 1
neighbor 10.10.20.3 remote-as 3
!
address-family ipv4 unicast
neighbor 10.10.10.1 soft-reconfiguration inbound
neighbor 10.10.20.3 soft-reconfiguration inbound
neighbor 10.10.20.3 advertise-map ADV-MAP non-exist-map EXIST-MAP
exit-address-family
!
ip prefix-list DEFAULT seq 5 permit 1.1.1.5/32
ip prefix-list DEFAULT seq 10 permit 1.1.1.1/32
ip prefix-list EXIST seq 5 permit 10.10.10.10/32
ip prefix-list DEFAULT-ROUTE seq 5 permit 0.0.0.0/0
ip prefix-list IP1 seq 5 permit 10.139.224.0/20
ip prefix-list T2 seq 5 permit 1.1.1.5/32
!
bgp community-list standard DC-ROUTES seq 5 permit 64952:3008
bgp community-list standard DC-ROUTES seq 10 permit 64671:501
bgp community-list standard DC-ROUTES seq 15 permit 64950:3009
bgp community-list standard DEFAULT-ROUTE seq 5 permit 65013:200
!
route-map ADV-MAP permit 10
match ip address prefix-list IP1
!
route-map ADV-MAP permit 20
match community DC-ROUTES
!
route-map EXIST-MAP permit 10
match community DEFAULT-ROUTE
match ip address prefix-list DEFAULT-ROUTE
!
line vty
!
end
Router2#
Router2# show ip bgp 0.0.0.0
BGP routing table entry for 0.0.0.0/0
Paths: (1 available, best #1, table default)
Advertised to non peer-group peers:
10.10.10.1 10.10.20.3
1
10.10.10.1 from 10.10.10.1 (10.139.224.1)
Origin IGP, metric 0, valid, external, best (First path received)
Community: 64848:3011 65011:200 65013:200
Last update: Tue Oct 6 02:39:42 2020
Router2#
Sample output with non-exist-map when default route present in table
--------------------------------------------------------------------
Router2# show ip bgp
BGP table version is 4, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 0.0.0.0/0 10.10.10.1 0 0 1 i
*> 1.1.1.1/32 10.10.10.1 0 0 1 i
*> 1.1.1.5/32 10.10.10.1 0 0 1 i
*> 10.139.224.0/20 10.10.10.1 0 0 1 ?
Displayed 4 routes and 4 total paths
Router2# show ip bgp neighbors 10.10.20.3 advertised-routes
BGP table version is 4, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 0.0.0.0/0 0.0.0.0 0 1 i
*> 1.1.1.5/32 0.0.0.0 0 1 i <<<<<<<<< non-exist-map : 0.0.0.0/0 is present so, 10.139.224.0/20 not advertised
Total number of prefixes 2
Sample output with non-exist-map when default route not present in table
------------------------------------------------------------------------
Router2# show ip bgp
BGP table version is 5, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.1/32 10.10.10.1 0 0 1 i
*> 1.1.1.5/32 10.10.10.1 0 0 1 i
*> 10.139.224.0/20 10.10.10.1 0 0 1 ?
Displayed 3 routes and 3 total paths
Router2#
Router2#
Router2# show ip bgp neighbors 10.10.20.3 advertised-routes
BGP table version is 5, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.1/32 0.0.0.0 0 1 i
*> 1.1.1.5/32 0.0.0.0 0 1 i
*> 10.139.224.0/20 0.0.0.0 0 1 ? <<<<<<<<< non-exist-map : 0.0.0.0/0 is not present so, 10.139.224.0/20 advertised
Total number of prefixes 3
Router2#
Sample output with exist-map when default route present in table
--------------------------------------------------------------------
Router2# show ip bgp
BGP table version is 8, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 0.0.0.0/0 10.10.10.1 0 0 1 i
*> 1.1.1.1/32 10.10.10.1 0 0 1 i
*> 1.1.1.5/32 10.10.10.1 0 0 1 i
*> 10.139.224.0/20 10.10.10.1 0 0 1 ?
Displayed 4 routes and 4 total paths
Router2#
Router2#
Router2#
Router2#
Router2# show ip bgp neighbors 10.10.20.3 advertised-routes
BGP table version is 8, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 0.0.0.0/0 0.0.0.0 0 1 i
*> 1.1.1.1/32 0.0.0.0 0 1 i
*> 1.1.1.5/32 0.0.0.0 0 1 i
*> 10.139.224.0/20 0.0.0.0 0 1 ? <<<<<<<<< exist-map : 0.0.0.0/0 is present so, 10.139.224.0/20 advertised
Total number of prefixes 4
Router2#
Sample output with exist-map when default route not present in table
--------------------------------------------------------------------
Router2# show ip bgp
BGP table version is 9, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.1/32 10.10.10.1 0 0 1 i
*> 1.1.1.5/32 10.10.10.1 0 0 1 i
*> 10.139.224.0/20 10.10.10.1 0 0 1 ?
Displayed 3 routes and 3 total paths
Router2#
Router2#
Router2#
Router2# show ip bgp neighbors 10.10.20.3 advertised-routes
BGP table version is 9, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.5/32 0.0.0.0 0 1 i <<<<<<<<< exist-map : 0.0.0.0/0 is not present so, 10.139.224.0/20 not advertised
Total number of prefixes 1
Router2#
Signed-off-by: Madhuri Kuruganti <k.madhuri@samsung.com>
Problem found that turning an update-delay would only delay prefixes
learned from peers by delaying bestpath, but would allow local routes
(network statements or redistributed) to be immediately advertised,
followed by an End of Rib indicator. This fix delays sending local
routes until the update-delay process is completed, which matches
what testing shows other vendors do..
Ticket: CM-31743
Signed-off-by: Don Slice <dslice@nvidia.com>
- tracepoint() -> frrtrace()
- tracelog() -> frrtracelog()
- tracepoint_enabled() -> frrtrace_enabled()
Also removes copypasta'd #ifdefs for those LTTng macros, those are
handled in lib/trace.h
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
