Using the previously-added vty_frame() support, this gets rid of all the
pointless empty "interface XYZ" blocks that get added for any interface
that shows up in the system (e.g. dummys, tunnels, etc.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
meh. forgot to even look at the interface deletion path. this doesn't
really work well when looking for the local address in the subnet list
which has the connected prefix in it... loop ensues.
fix by using the connected prefix when looking at the list of connected
prefixes. duh.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
add a connected_check_ptp function which does the same as
connected_check, but takes an additional peer prefix argument.
also fix related prefixlen mixup in PtP addresses (the local part of a
PtP address always is /32, but previously the peer mask got copied.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Frr has an assumption that when interface A links to B,
we already know about B. But that might be true always.
It is probably purely depends on the configuration
and how the interfaces are hashed in Kernel.
FRR seems to sometimes get "A is linked to B" before it knows about B,
in that case, the linkage between the data structure for A & B won't be proper.
Ticket: CM-17679
Review: ccr-6628
Testing: Manual
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
This allows modules to register their own additional hooks on interface
creation/deletion.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This was incorrectly implemented to begin with (it only re-added routes,
but didn't remove them) and is now covered in static_ifindex_update.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Whenever an interface is created or deleted in the system, we need to
check whether we have static routes referencing that interface by name.
If so, we need to [un]install these routes.
This has the unfortunate side effect of making static routes with
non-existent interfaces disappear from "show ip route", but I think
that's acceptable (and I don't see a "good" fix for that).
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This reverts commit c14777c6bf.
clang 5 is not widely available enough for people to indent with. This
is particularly problematic when rebasing/adjusting branches.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
This allows frr-reload.py (or anything else that scripts via vtysh)
to know if the vtysh command worked or hit an error.
Implement handling of MACs and Neighbors (ARP/ND entries) in zebra:
- MAC and Neighbor database handlers
- Read MACs and Neighbors from the kernel, when needed and create
entries in zebra's MAC and Neighbor databases.
- Handle add/update/delete notifications from the kernel for MACs and
Neighbors and update zebra's database appropriately
- Inform locally learnt MACs and Neighbors to client
- Handle MACIP add/delete from client and install appriporiate entries
into the kernel
- Since Neighbor entries will be installed on an SVI, implement the
needed mappings
NOTE: kernel interface is only implemented for Linux/netlink
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Implement fundamental handling for VNIs and VTEPs:
- Handle EVPN enable/disable by client (advertise-all-vni)
- Create/update/delete VNIs based on VxLAN interface events and inform
client
- Handle VTEP add/delete from client and install into kernel
- New debug command for VxLAN/EVPN
- kernel interface (Linux/netlink only)
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Define interface types of interest and recognize the types. Store layer-2
information (VLAN Id, VNI etc.) for interfaces, process bridge interfaces
and map bridge members to bridge. Display all the additional information
to user (through "show interface").
Note: Only implemented for the netlink interface.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
The if_update function was taking the interface name as
input and reapplying it, using strncpy to reapply the name.
This has several issues. strncpy should not be used
to copy memory in place. The second issue is that
the interface name is not actually changing when we
update interface to be in the new vrf.
Since every usage of if_update was just reapplying the same
name the interface actually had, just remove that part of
the function and rename it to if_update_to_new_vrf
to represent what it is actually doing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Encountered a crash in zebra due to getting a delete on an SVI with
VRR configured. Since we don't actually do a delete but flag the interface
as inactive, slag VRR interfaces would remain on the vrf_iflist with a lock
count of zero, causing the crash. Since all other interface types are moved
to the default table before deleting, doing the same thing for any interfaces
that were left in the vrf.
Testing includes manual testing, bgp-min, ospf-min, vrf-min, bgp-smoke, and ospf-smoke.
All passed (first time or on rerun) or match known failures.
Ticket: CM-13288
Signed-off-by: Don Slice
Reviewed-by: Donald Sharp
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Restore the original logic in netlink_link_change() which works like this:
* once an interface event is detected, lookup the associated interface
by its name;
* call the set_ifindex() function;
* set_ifindex() will lookup the interface again but now by its ifindex. If
the lookups by name and ifindex yield to different results, then the
interface was renamed and set_ifindex() will take care of that.
In the future, zns->if_table will be split into two different data
structures to allow faster lookups by both name and ifindex.
Fixes Issue #397.
Regression introduced by commit 12f6fb9.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Add missing bits to properly unlink interface in the if_unlink_per_ns()
function.
In the long term we should convert if_table to use a more convenient
data structure like a red-black tree instead of a routing table.
Fixes issue #398.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Problem reported that crash occurred when stopping quagga in certain
circumstances. Determined that this was due to a stale pointer on the
ifp for a deleted interface. The ifp->node had been freed but the ifp
still kept a pointer to it, and when later the process was stopped, it
attempted to delete it again.
Ticket: CM-15550
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
These have copies in vtysh that do the node-switch locally and are
listed in extract.pl's ignore list. The ignore list however is
redundant since DEFUN_NOSH does the same thing...
ldpd is a bit hacky, but Renato is reworking this anyway.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* lib/if.h: Remove LP_TE as Link Parameters is set if different from 0
See IS_LINK_PARAMS_SET macro and use LP_TE_METRIC to determine if TE metric
is set or not
* lib/if.c: replace LP_TE by LP_TE_METRIC in default LP status
* zebra/interface.c: replace LP_TE by LP_TE_METRIC and check if TE metric
is equal to standard metric or not
* ospfd/ospf_te.c: replace LP_TE by LP_TE_METRIC
* isisd/isis_te.c: replace LP_TE by LP_TE_METRIC
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
These now generate warnings which will break the build with -Werror.
Note this may have enabled commands that should be disabled, or the
other way around...
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This contains bgp memory leak fixes as well as cleanups to VRF/namespace
handling and has been run through extended testing in Cumulus' testbed:
Tested-by: Donald Sharp <sharpd@cumulusnetworks.com>
When link-params is configured it auto starts displaying
6000-02# conf t
dell-s6000-02(config)# int swp1
dell-s6000-02(config-if)# link-params
dell-s6000-02(config-link-params)# admin-grp 0x12345678
dell-s6000-02(config-link-params)# end
dell-s6000-02# show run
interface swp1
link-params
enable
metric 0 <----Remove the bw lines
max-bw 1.25e+06
max-rsv-bw 1.25e+06
unrsv-bw 0 1.25e+06
unrsv-bw 1 1.25e+06
unrsv-bw 2 1.25e+06
unrsv-bw 3 1.25e+06
unrsv-bw 4 1.25e+06
unrsv-bw 5 1.25e+06
unrsv-bw 6 1.25e+06
unrsv-bw 7 1.25e+06
admin-grp 305419896
exit-link-params
!
I'd like to reduce this to:
interface enp0s3
ip igmp
ip pim sm
link-params
enable
admin-grp 0x12345678 <----- Fix this to be what we entered
exit-link-params
!
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This moves all install_element calls into the file where the DEFUNs are
located. This fixes several small related bugs:
- ospf6d wasn't installing a "no interface FOO" command
- zebra had a useless copy of "interface FOO"
- pimd's copy of "interface FOO" was not setting qobj_index, which means
"description LINE" commands would fail with an error
The next commit will do the actual act of making "foo_cmd" static.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Only connected routes which have ZEBRA_IFC_REAL set should
be redistributed.
Signed-off-by: Christian Franke <nobody@nowhere.ws>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Since VRFs can be searched by vrf_id or name, make this explicit in the
helper functions.
s/vrf_lookup/vrf_lookup_by_id/
s/zebra_vrf_lookup/zebra_vrf_lookup_by_id/
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
* move netlink code from zebra_nc.c to kernel_netlink.c;
* move vrf CLI commands from if.c/interface.c to vrf.c/zebra_vrf.c;
* move declaration of the 'ns' structure to a header file.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Fix the link-params submode to use the 'exit-link-params'
to indicate we are exiting a submode.
Fixup all the relevant bits.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If a command is put into the VIEW_NODE, it is going into the
ENABLE_NODE as well. This is especially true for show commands.
As such if a command is in both consolidate it down to VIEW_NODE.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This puts all the proper VTY_DECLVAR_CONTEXT calls in place, removing
all vty->index uses in the process. With that, vty_config_lockless can
be enabled in zebra.
[v2: fix ordering screw-up in "interface XXX" command]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This is a rather large mechanical commit that splits up the memory types
defined in lib/memtypes.c and distributes them into *_memory.[ch] files
in the individual daemons.
The zebra change is slightly annoying because there is no nice place to
put the #include "zebra_memory.h" statement.
bgpd, ospf6d, isisd and some tests were reusing MTYPEs defined in the
library for its own use. This is bad practice and would break when the
memtype are made static.
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
[CF: rebased for cmaster-next]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
NOTE: I am squashing several commits together because they
do not independently compile and we need this ability to
do any type of sane testing on the patches. Since this
series builds together I am doing this. -DBS
This new structure is the basis to get new link parameters for
Traffic Engineering from Zebra/interface layer to OSPFD and ISISD
for the support of Traffic Engineering
* lib/if.[c,h]: link parameters struture and get/set functions
* lib/command.[c,h]: creation of a new link-node
* lib/zclient.[c,h]: modification to the ZBUS message to convey the
link parameters structure
* lib/zebra.h: New ZBUS message
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Add support for IEEE 754 format
* lib/stream.[c,h]: Add stream_get{f,d} and stream_put{f,d}) demux and muxers to
safely convert between big-endian IEEE-754 single and double binary
format, as used in IETF RFCs, and C99. Implementation depends on host
using __STDC_IEC_559__, which should be everything we care about. Should
correctly error out otherwise.
* lib/network.[c,h]: Add ntohf and htonf converter
* lib/memtypes.c: Add new memeory type for Traffic Engineering support
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Add link parameters support to Zebra
* zebra/interface.c:
- Add new link-params CLI commands
- Add new functions to set/get link parameters for interface
* zebra/redistribute.[c,h]: Add new function to propagate link parameters
to routing daemon (essentially OSPFD and ISISD) for Traffic Engineering.
* zebra/redistribute_null.c: Add new function
zebra_interface_parameters_update()
* zebra/zserv.[c,h]: Add new functions to send link parameters
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Add support of new link-params CLI to vtysh
In vtysh_config.c/vtysh_config_parse_line(), it is not possible to continue
to use the ordered version for adding line i.e. config_add_line_uniq() to print
Interface CLI commands as it completely break the new LINK_PARAMS_NODE.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Update Traffic Engineering support for OSPFD
These patches update original code to RFC3630 (OSPF-TE) and add support of
RFC5392 (Inter-AS v2) & RFC7471 (TE metric extensions) and partial support
of RFC6827 (ASON - GMPLS).
* ospfd/ospf_dump.[c,h]: Add new dump functions for Traffic Engineering
* ospfd/ospf_opaque.[c,h]: Add new TLV code points for RFC5392
* ospfd/ospf_packet.c: Update checking of OSPF_OPTION
* ospfd/ospf_vty.[c,h]: Update ospf_str2area_id
* ospfd/ospf_zebra.c: Add new function ospf_interface_link_params() to get
Link Parameters information from the interface to populate Traffic Engineering
metrics
* ospfd/ospfd.[c,h]: Update OSPF_OPTION flags (T -> MT and new DN)
* ospfd/ospf_te.[c,h]: Major modifications to update the code to new
link parameters structure and new RFCs
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
tmp
This removes the BSD specific usage of struct sockaddr_dl
hardware address. This unifies to use explict hw_addr member for
the address, and zebra specific enumeration for the link layer
type.
Additionally the zapi is updated to never send platform specific
structures over the wire, but the ll_type along with hw_addr_len
and hw_addr are now sent for all platforms.
Based on initial work by Paul Jakma.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
# Please enter the commit message for your changes. Lines starting
# with '#' will be kept; you may remove them yourself if you want to.
# An empty message aborts the commit.
#
# Author: Timo Teräs <timo.teras@iki.fi>
#
# rebase in progress; onto 9c2f85d
# You are currently editing a commit while rebasing branch 'renato' on '9c2f85d'.
#
# Changes to be committed:
# modified: isisd/isis_circuit.c
# modified: lib/if.c
# modified: lib/if.h
# modified: lib/zclient.c
# modified: zebra/interface.c
# modified: zebra/interface.h
# modified: zebra/kernel_socket.c
# modified: zebra/rt_netlink.c
# modified: zebra/rtadv.c
# modified: zebra/zserv.c
#
# Untracked files:
# "\033\033OA\033OB\033"
# 0001-bgpd-fix-build-on-Solaris.patch
# ldpd/
# redhat/ldpd.init
# redhat/ldpd.service
# tags
#
We shouldn't have platform-agnostic code (e.g. zebra/interface.c)
calling platform-specific functions (e.g. netlink_neigh_update).
This commit introduces the kernel_neigh_update() function, which then
has to be implemented by all supported platforms. Currently only Linux
implements this function, which is only used by the RTADV code.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Ticket: CM-11808
Reviewed By: CCR-4972
Testing Done: Usual stuff
link-detect is on by default, and has been so since the first release
of Cumulus Linux. So, in the light of not displaying defaults, don't
display link-detect if enabled, only if disabled.
Resolved several memory leaks caused by ifdown/ifup the vrf device or
a swp port. For bgp/zebra/ospf/ospf6, bouncing the vrf device would cause
a linked list, Interface, and route-table to get leaked. For ospf6,
bouncing the swp device also caused leaks of Connected and Prefix entries.
Ticket: CM-10841
Signed-off-by: Don Slice
Reviewed-By: Donald Sharp
Testing Done: Manual testing, bgp and ospf mins passed, smokes had fewer failures than base
Prior to this change, interface bandwidth could not be defined above 10G. With
the use of higher speed interfaces, the ability to effectively define the path
links was highly impacted. Additionally, the default auto-cost reference-bandwidth
for ospf and ospfv3 was set to 100M, which relects a much earlier time. Changed both
the range of interface bandwidth definitions and reference bandwidths to be up to
100G. Set the default interface bandwidth (if not defined) to 10G to make the ratio
continue to cause a cost of 10 as before. Manual testing as well as ospf-min and
ospf-smoke passed successfully.
Ticket: CM-10756
Signed-of-by: Don Slice
Reviewed-by: Donald Sharp
This makes code more robust, consice and readable.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
(cherry picked from commit be6335d682c5ee1b6930345193eda875705fbab2)
