Whenever an interface is created or deleted in the system, we need to
check whether we have static routes referencing that interface by name.
If so, we need to [un]install these routes.
This has the unfortunate side effect of making static routes with
non-existent interfaces disappear from "show ip route", but I think
that's acceptable (and I don't see a "good" fix for that).
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This reverts commit c14777c6bf.
clang 5 is not widely available enough for people to indent with. This
is particularly problematic when rebasing/adjusting branches.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
This allows frr-reload.py (or anything else that scripts via vtysh)
to know if the vtysh command worked or hit an error.
Implement handling of MACs and Neighbors (ARP/ND entries) in zebra:
- MAC and Neighbor database handlers
- Read MACs and Neighbors from the kernel, when needed and create
entries in zebra's MAC and Neighbor databases.
- Handle add/update/delete notifications from the kernel for MACs and
Neighbors and update zebra's database appropriately
- Inform locally learnt MACs and Neighbors to client
- Handle MACIP add/delete from client and install appriporiate entries
into the kernel
- Since Neighbor entries will be installed on an SVI, implement the
needed mappings
NOTE: kernel interface is only implemented for Linux/netlink
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Implement fundamental handling for VNIs and VTEPs:
- Handle EVPN enable/disable by client (advertise-all-vni)
- Create/update/delete VNIs based on VxLAN interface events and inform
client
- Handle VTEP add/delete from client and install into kernel
- New debug command for VxLAN/EVPN
- kernel interface (Linux/netlink only)
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Define interface types of interest and recognize the types. Store layer-2
information (VLAN Id, VNI etc.) for interfaces, process bridge interfaces
and map bridge members to bridge. Display all the additional information
to user (through "show interface").
Note: Only implemented for the netlink interface.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
The if_update function was taking the interface name as
input and reapplying it, using strncpy to reapply the name.
This has several issues. strncpy should not be used
to copy memory in place. The second issue is that
the interface name is not actually changing when we
update interface to be in the new vrf.
Since every usage of if_update was just reapplying the same
name the interface actually had, just remove that part of
the function and rename it to if_update_to_new_vrf
to represent what it is actually doing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Encountered a crash in zebra due to getting a delete on an SVI with
VRR configured. Since we don't actually do a delete but flag the interface
as inactive, slag VRR interfaces would remain on the vrf_iflist with a lock
count of zero, causing the crash. Since all other interface types are moved
to the default table before deleting, doing the same thing for any interfaces
that were left in the vrf.
Testing includes manual testing, bgp-min, ospf-min, vrf-min, bgp-smoke, and ospf-smoke.
All passed (first time or on rerun) or match known failures.
Ticket: CM-13288
Signed-off-by: Don Slice
Reviewed-by: Donald Sharp
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Restore the original logic in netlink_link_change() which works like this:
* once an interface event is detected, lookup the associated interface
by its name;
* call the set_ifindex() function;
* set_ifindex() will lookup the interface again but now by its ifindex. If
the lookups by name and ifindex yield to different results, then the
interface was renamed and set_ifindex() will take care of that.
In the future, zns->if_table will be split into two different data
structures to allow faster lookups by both name and ifindex.
Fixes Issue #397.
Regression introduced by commit 12f6fb9.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Add missing bits to properly unlink interface in the if_unlink_per_ns()
function.
In the long term we should convert if_table to use a more convenient
data structure like a red-black tree instead of a routing table.
Fixes issue #398.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Problem reported that crash occurred when stopping quagga in certain
circumstances. Determined that this was due to a stale pointer on the
ifp for a deleted interface. The ifp->node had been freed but the ifp
still kept a pointer to it, and when later the process was stopped, it
attempted to delete it again.
Ticket: CM-15550
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
These have copies in vtysh that do the node-switch locally and are
listed in extract.pl's ignore list. The ignore list however is
redundant since DEFUN_NOSH does the same thing...
ldpd is a bit hacky, but Renato is reworking this anyway.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* lib/if.h: Remove LP_TE as Link Parameters is set if different from 0
See IS_LINK_PARAMS_SET macro and use LP_TE_METRIC to determine if TE metric
is set or not
* lib/if.c: replace LP_TE by LP_TE_METRIC in default LP status
* zebra/interface.c: replace LP_TE by LP_TE_METRIC and check if TE metric
is equal to standard metric or not
* ospfd/ospf_te.c: replace LP_TE by LP_TE_METRIC
* isisd/isis_te.c: replace LP_TE by LP_TE_METRIC
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
These now generate warnings which will break the build with -Werror.
Note this may have enabled commands that should be disabled, or the
other way around...
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This contains bgp memory leak fixes as well as cleanups to VRF/namespace
handling and has been run through extended testing in Cumulus' testbed:
Tested-by: Donald Sharp <sharpd@cumulusnetworks.com>
When link-params is configured it auto starts displaying
6000-02# conf t
dell-s6000-02(config)# int swp1
dell-s6000-02(config-if)# link-params
dell-s6000-02(config-link-params)# admin-grp 0x12345678
dell-s6000-02(config-link-params)# end
dell-s6000-02# show run
interface swp1
link-params
enable
metric 0 <----Remove the bw lines
max-bw 1.25e+06
max-rsv-bw 1.25e+06
unrsv-bw 0 1.25e+06
unrsv-bw 1 1.25e+06
unrsv-bw 2 1.25e+06
unrsv-bw 3 1.25e+06
unrsv-bw 4 1.25e+06
unrsv-bw 5 1.25e+06
unrsv-bw 6 1.25e+06
unrsv-bw 7 1.25e+06
admin-grp 305419896
exit-link-params
!
I'd like to reduce this to:
interface enp0s3
ip igmp
ip pim sm
link-params
enable
admin-grp 0x12345678 <----- Fix this to be what we entered
exit-link-params
!
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This moves all install_element calls into the file where the DEFUNs are
located. This fixes several small related bugs:
- ospf6d wasn't installing a "no interface FOO" command
- zebra had a useless copy of "interface FOO"
- pimd's copy of "interface FOO" was not setting qobj_index, which means
"description LINE" commands would fail with an error
The next commit will do the actual act of making "foo_cmd" static.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Only connected routes which have ZEBRA_IFC_REAL set should
be redistributed.
Signed-off-by: Christian Franke <nobody@nowhere.ws>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Since VRFs can be searched by vrf_id or name, make this explicit in the
helper functions.
s/vrf_lookup/vrf_lookup_by_id/
s/zebra_vrf_lookup/zebra_vrf_lookup_by_id/
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
* move netlink code from zebra_nc.c to kernel_netlink.c;
* move vrf CLI commands from if.c/interface.c to vrf.c/zebra_vrf.c;
* move declaration of the 'ns' structure to a header file.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Fix the link-params submode to use the 'exit-link-params'
to indicate we are exiting a submode.
Fixup all the relevant bits.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If a command is put into the VIEW_NODE, it is going into the
ENABLE_NODE as well. This is especially true for show commands.
As such if a command is in both consolidate it down to VIEW_NODE.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This puts all the proper VTY_DECLVAR_CONTEXT calls in place, removing
all vty->index uses in the process. With that, vty_config_lockless can
be enabled in zebra.
[v2: fix ordering screw-up in "interface XXX" command]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This is a rather large mechanical commit that splits up the memory types
defined in lib/memtypes.c and distributes them into *_memory.[ch] files
in the individual daemons.
The zebra change is slightly annoying because there is no nice place to
put the #include "zebra_memory.h" statement.
bgpd, ospf6d, isisd and some tests were reusing MTYPEs defined in the
library for its own use. This is bad practice and would break when the
memtype are made static.
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
[CF: rebased for cmaster-next]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
NOTE: I am squashing several commits together because they
do not independently compile and we need this ability to
do any type of sane testing on the patches. Since this
series builds together I am doing this. -DBS
This new structure is the basis to get new link parameters for
Traffic Engineering from Zebra/interface layer to OSPFD and ISISD
for the support of Traffic Engineering
* lib/if.[c,h]: link parameters struture and get/set functions
* lib/command.[c,h]: creation of a new link-node
* lib/zclient.[c,h]: modification to the ZBUS message to convey the
link parameters structure
* lib/zebra.h: New ZBUS message
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Add support for IEEE 754 format
* lib/stream.[c,h]: Add stream_get{f,d} and stream_put{f,d}) demux and muxers to
safely convert between big-endian IEEE-754 single and double binary
format, as used in IETF RFCs, and C99. Implementation depends on host
using __STDC_IEC_559__, which should be everything we care about. Should
correctly error out otherwise.
* lib/network.[c,h]: Add ntohf and htonf converter
* lib/memtypes.c: Add new memeory type for Traffic Engineering support
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Add link parameters support to Zebra
* zebra/interface.c:
- Add new link-params CLI commands
- Add new functions to set/get link parameters for interface
* zebra/redistribute.[c,h]: Add new function to propagate link parameters
to routing daemon (essentially OSPFD and ISISD) for Traffic Engineering.
* zebra/redistribute_null.c: Add new function
zebra_interface_parameters_update()
* zebra/zserv.[c,h]: Add new functions to send link parameters
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Add support of new link-params CLI to vtysh
In vtysh_config.c/vtysh_config_parse_line(), it is not possible to continue
to use the ordered version for adding line i.e. config_add_line_uniq() to print
Interface CLI commands as it completely break the new LINK_PARAMS_NODE.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Update Traffic Engineering support for OSPFD
These patches update original code to RFC3630 (OSPF-TE) and add support of
RFC5392 (Inter-AS v2) & RFC7471 (TE metric extensions) and partial support
of RFC6827 (ASON - GMPLS).
* ospfd/ospf_dump.[c,h]: Add new dump functions for Traffic Engineering
* ospfd/ospf_opaque.[c,h]: Add new TLV code points for RFC5392
* ospfd/ospf_packet.c: Update checking of OSPF_OPTION
* ospfd/ospf_vty.[c,h]: Update ospf_str2area_id
* ospfd/ospf_zebra.c: Add new function ospf_interface_link_params() to get
Link Parameters information from the interface to populate Traffic Engineering
metrics
* ospfd/ospfd.[c,h]: Update OSPF_OPTION flags (T -> MT and new DN)
* ospfd/ospf_te.[c,h]: Major modifications to update the code to new
link parameters structure and new RFCs
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
tmp
This removes the BSD specific usage of struct sockaddr_dl
hardware address. This unifies to use explict hw_addr member for
the address, and zebra specific enumeration for the link layer
type.
Additionally the zapi is updated to never send platform specific
structures over the wire, but the ll_type along with hw_addr_len
and hw_addr are now sent for all platforms.
Based on initial work by Paul Jakma.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
# Please enter the commit message for your changes. Lines starting
# with '#' will be kept; you may remove them yourself if you want to.
# An empty message aborts the commit.
#
# Author: Timo Teräs <timo.teras@iki.fi>
#
# rebase in progress; onto 9c2f85d
# You are currently editing a commit while rebasing branch 'renato' on '9c2f85d'.
#
# Changes to be committed:
# modified: isisd/isis_circuit.c
# modified: lib/if.c
# modified: lib/if.h
# modified: lib/zclient.c
# modified: zebra/interface.c
# modified: zebra/interface.h
# modified: zebra/kernel_socket.c
# modified: zebra/rt_netlink.c
# modified: zebra/rtadv.c
# modified: zebra/zserv.c
#
# Untracked files:
# "\033\033OA\033OB\033"
# 0001-bgpd-fix-build-on-Solaris.patch
# ldpd/
# redhat/ldpd.init
# redhat/ldpd.service
# tags
#
We shouldn't have platform-agnostic code (e.g. zebra/interface.c)
calling platform-specific functions (e.g. netlink_neigh_update).
This commit introduces the kernel_neigh_update() function, which then
has to be implemented by all supported platforms. Currently only Linux
implements this function, which is only used by the RTADV code.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Ticket: CM-11808
Reviewed By: CCR-4972
Testing Done: Usual stuff
link-detect is on by default, and has been so since the first release
of Cumulus Linux. So, in the light of not displaying defaults, don't
display link-detect if enabled, only if disabled.
Resolved several memory leaks caused by ifdown/ifup the vrf device or
a swp port. For bgp/zebra/ospf/ospf6, bouncing the vrf device would cause
a linked list, Interface, and route-table to get leaked. For ospf6,
bouncing the swp device also caused leaks of Connected and Prefix entries.
Ticket: CM-10841
Signed-off-by: Don Slice
Reviewed-By: Donald Sharp
Testing Done: Manual testing, bgp and ospf mins passed, smokes had fewer failures than base
Prior to this change, interface bandwidth could not be defined above 10G. With
the use of higher speed interfaces, the ability to effectively define the path
links was highly impacted. Additionally, the default auto-cost reference-bandwidth
for ospf and ospfv3 was set to 100M, which relects a much earlier time. Changed both
the range of interface bandwidth definitions and reference bandwidths to be up to
100G. Set the default interface bandwidth (if not defined) to 10G to make the ratio
continue to cause a cost of 10 as before. Manual testing as well as ospf-min and
ospf-smoke passed successfully.
Ticket: CM-10756
Signed-of-by: Don Slice
Reviewed-by: Donald Sharp
This makes code more robust, consice and readable.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
(cherry picked from commit be6335d682c5ee1b6930345193eda875705fbab2)
Coverity Scan #1221454
In zebra/interface.c if_data could be null dereferenced without early
check.
Signed-off-by: Morgan Stewart <morgan@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
(cherry picked from commit c8394ace7081ef0e71f3d162067c83c2629fc088)
"format '%qu' expects type 'long long unsigned int', but argument 3 has
type '__uint64_t'"
Move to %llu, which is more standard.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
(cherry picked from commit 193e78f2460a537695e34368a29fc5cd02e4e1f5)
The default for this is slated to change, so let's print the current
default value for preexisting configurations.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
(cherry picked from commit 4c421215a0330b96d85879810558d40027a96ca6)
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
This commit fixes interface based static routes.
static routes are now stored and if an interface
comes up it finds the route and installs it.
Ticket: CM-10869
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
The show vrf and show run commands were iterating
over the vrf_list. Use the zvrf_list instead
so that we can understand the differences
between something configed -vs- created
Ticket: CM-10139
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
On enable/disable of static routes add and remove them
from the rib as appropriate.
Ticket: CM-10139
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Instead of turning on IPv6 RA on every interface as soon as it has an IPv6
address, only enable it upon configuration of BGP neighbor. When the BGP
neighbor is deleted, signal that RAs can be turned off.
To support this, introduce new message interaction between BGP and Zebra.
Also, take appropriate actions in BGP upon interface add/del since the
unnumbered neighbor could exist prior to interface creation etc.
Only unnumbered IPv6 neighbors require RA, the /30 or /31 based neighbors
don't. However, to keep the interaction simple and not have to deal with
too many dynamic conditions (e.g., address deletes or neighbor change to/from
'v6only'), RAs on the interface are triggered upon any unnumbered neighbor
configuration.
BGP-triggered RAs will cause RAs to be initiated on the interface; however,
if BGP asks that RAs be stopped (upon delete of unnumbered neighbor), RAs
will continue to be exchanged if the operator has explicitly enabled.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-10640
Reviewed By: CCR-4589
Testing Done: Various manual and automated (refer to defect)
Ticket: CM-7076
Reviewed By: CCR-4568
Testing Done:
To allow for faster convergence, modify transmission of IPv6 RA so
that on link transitions(link up, change VRF, link add etc.), we
transmit RA fast to ensure faster convergence with BGP Unnumbered.
But we don't enable Fast RA if RA interval is in msecs as we've
fixed the fast RA interval to be 1s. We retransmit RA 4 times, once
each second on link events and when RA is first enabled.
CM-10435
Issue: IBGP BFD sessions are created as multi-hop even though peer is single-hop away. This is causing an interop issue with ICOS.
Root Cause: By design all IBGP peers are registered with BFD as multi-hop.
Fix:
• Changed the default behavior of always treating IBGP BFD sessions as mult-hop. shared_network variable is used to determine whether the IBGP peer is single hop or multi-hop away. The logic for determining whether EBGP peer is single hop or multi-hop has not been changed.
• Since the default behavior has been changed, it will cause interop issues between 2.5 and 3.0 IBGP BFD sessions. A new hidden command “bfd multihop/singlehop” has been introduced to overcome the interop issues.
dell-s6000-10(config-router)# neighbor 30.0.2.6 bfd
<2-255> Detect Multiplier
<cr>
dell-s6000-10(config-router)# neighbor 30.0.2.6 bfd multihop
dell-s6000-10(config-router)# no neighbor 30.0.2.6 bfd multihop
dell-s6000-10(config-router)#
dell-s6000-10(config-router)# neighbor 30.0.2.6 bfd multihop
dell-s6000-10(config-router)# do show running-config
!
router bgp 100
neighbor igroup peer-group
neighbor igroup bfd 5 500 500
neighbor igroup bfd multihop
neighbor 30.0.2.2 remote-as 100
neighbor 30.0.2.2 peer-group igroup
neighbor 3101🔤bcad::2 remote-as 100
neighbor 3101🔤bcad::2 peer-group igroup
neighbor 30.0.2.6 remote-as 200
neighbor 30.0.2.6 bfd multihop
neighbor 3102🔤bcad::6 remote-as 200
neighbor 3102🔤bcad::6 bfd
neighbor 3102🔤bcad::6 ebgp-multihop 255
!
CM-10260
Issue: “Unable to connect to socket” message keeps getting logged when ptmd process doesn’t exist.
Root Cause: BFD clients (bgpd, ospfd and ospf6d) during initialization try to register with BFD/PTM by default. This results in continuous logging If PTM does not exist since there is no max on number of retries.
Fix:
• Stop the retries to connect to PTM after max reconnect timer of 5 mins is reached.
• Added zebra debug event wrapper to message logging to prevent it from showing by default.
CM-4541
Issue: Addition of a new command "ptm-enable" or "no ptm-enable" per interface to enable/disable PTM link status checks for an interface.
Fix: Currently there is only one ptm-enable global command that enables/disables PTM status updates for all interfaces. This new command will give the handle to individually stop interface from reacting on the PTM status updates.
• by default interface uses the ptm-enable global configuration
• "no ptm-enable" on an interface will disable PTM status updates from taking affect for that interface. This can bring the interface up if it was brought down due to PTM status update.
• "ptm-enable" on an interface will cause the interface to fallback to the global ptm-enable configuration value and will bring the interface up or down based on the last stored PTM status update if global ptm is enabled.
Ticket: CM-10435, CM-10260 and CM-4541
Signed-off-by: Radhika Mahankali
Reviewed-by: Donald Sharp, Kanna Rajagopal
Move zebra_vrf_XXX functionality into it's own
file so that we can isolate a bit the api edges
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
