Made changes and updated the routemap applied
counter in the following flows.
1.Increment the routemap applied counter when route map
attached to a redistribution list.
The counter will be updated if the routemap exists.
2.Decrement when route map removed / modified from a
redistribution list.
3.Increment/decrement when route map create/delete
callback triggered.
Signed-off-by: RajeshGirada <rgirada@vmware.com>
- some target_CFLAGS that needed to include AM_CFLAGS didn't do so
- libyang/sysrepo/sqlite3/confd CFLAGS + LIBS weren't used at all
- consistently use $(FOO_CFLAGS) instead of @FOO_CFLAGS@
- 2 dependencies were missing for clippy
Signed-off-by: David Lamparter <equinox@diac24.net>
Avoid a IPv6 multicast group join race by delaying the group install
before processing all event queue.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
When using the timer to set the socket multicast options, keep track
of the thread pointer. If we lose the thread reference we might have
situations where multicast is enabled when it should be disabled and
vice versa.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Some daemons like ospfd and isisd have the ability to advertise a
default route to their peers only if one exists in the RIB. This
is what the "default-information originate" commands do when used
without the "always" parameter.
For that to work, these daemons use the ZEBRA_REDISTRIBUTE_DEFAULT_ADD
message to request default route information to zebra. The problem
is that this message didn't have an AFI parameter, so a default route
from any address-family would satisfy the requests from both daemons
(e.g. ::/0 would trigger ospfd to advertise a default route to its
peers, and 0.0.0.0/0 would trigger isisd to advertise a default route
to its IPv6 peers).
Fix this by adding an AFI parameter to the
ZEBRA_REDISTRIBUTE_DEFAULT_{ADD,DELETE} messages and making the
corresponding code changes.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
cf. https://wiki.debian.org/NonFreeIETFDocuments
These MIBs were in our git purely for documentation purposes, they are
not installed and not needed for building SNMP support.
Signed-off-by: David Lamparter <equinox@diac24.net>
ABR summary should contain best intra prefix LSA.
There might be a case where intra-prefix route with different
cost from different advertising router present, summary
advertisement should only consider best intra-prefix route.
A route which is marked for remove, while purging the route's
ABR summary LSA also remove summary route from the summary
table.
Ticket:CM-22665
Testing Done:
Validate on ABR topology, intra-prefix route with
different cost, a higher cost intra-prefix route skip from sending
ABR summary LSA.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
it was not possible to configure per area identifier under decimal
format some ospf6 area options. this is the case of filter list, or
export-list.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
It's been a year since we added the new optional parameters
to instantiation. Let's switch over to the new name.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The frr-interface YANG module models interfaces using a YANG list keyed
by the interface name and the interface VRF. Interfaces can't be keyed
only by their name since interface names might not be globally unique
when the netns VRF backend is in use. When using the VRF-Lite backend,
however, interface names *must* be globally unique. In this case, we need
to validate the uniqueness of interface names inside the appropriate
northbound callback since this constraint can't be expressed in the
YANG language. We must also ensure that only inactive interfaces can be
removed, among other things we need to validate in the northbound layer.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Introduce frr-interface.yang, which defines a model for managing FRR
interfaces.
Update the 'frr_yang_module_info' array of all daemons that will
implement this module.
Add automatically generated stub callbacks in if.c. These callbacks will
be implemented in the following commit.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
FRR_DAEMON_INFO should now contain an array of 'frr_yang_module_info'
structures describing the YANG modules implemented by the daemon.
This array will be used by frr_init() function to load all YANG modules
and initialize the northbound callbacks during the daemon initialization.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
We had a variety of issues with sorted list compare functions.
This commit identifies and fixes these issues.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Use ospf6_prefix_same for comparing two exact same prefix
to determine ECMP for a route.
ospf6_route_cmp expects two different prefix rather
being exactly same.
Ticket:CM-22630
Testing Done:
performed ECMP of intra network prefix route via
sending same route via different available
ospf6 paths.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
The dead code has been disabled with '#if 0', in a similar way to other
disabled logs in the same function.
Signed-off-by: F. Aragon <paco@voltanet.io>
Issue: # https://github.com/FRRouting/frr/issues/1836
Issue 1: if the router ospf current configuration is "area 0.0.0.2
range 1.0.0.0/24 cost 23" and user try to configure "area 0.0.0.2
range 1.0.0.0/24 not-advertise", the existing o/p is "area 0.0.0.2
range 1.0.0.0/24 cost 23 not-advertise". The keywords "not-advertise"
& "cost" are multually exclusive, so they should not come together.
The vice versa way configuration is working fine.
Fix: When ospf area range "not-advertise", the cost should be initialized
to OSPF_AREA_RANGE_COST_UNSPEC.
Issue 2: if the router ospf current configuration "area 0.0.0.2 range
1.0.0.0/24 substitute 2.0.0.0/24" and user try to configure "area 0.0.0.2
range 1.0.0.0/24 not-advertise" the existing o/p is "area 0.0.0.2 range
1.0.0.0/24 not-advertise substitute 2.0.0.0/24". The keywords
"not-advertise" & "substiture" are multually exclusive, so they should
not come together. The vice versa way configuration is working fine.
Fix: When ospf area range "not-advertise" is configured,
ospf_area_range_substitute_unset() should be get called.
Issue 3: if the router ospf6 current configuration is "area 0.0.0.2
range 2001::/64 cost 23" and user try to configure "area 0.0.0.2 range
2001::/64 advertise", the existing o/p is area 0.0.0.2 range 2001::/64.
The keyword "cost 23" disappears.
Fix: When ospf area range "advertise" is configured and the range is not
NULL, the cost should not be modified.
Signed-off-by: Sarita Patra <saritap@vmware.com>
This serves no other purpose than to generate stupid warnings for
overwritten initializers on old gcc versions.
Signed-off-by: David Lamparter <equinox@diac24.net>
Since we're now building through one large Makefile, we can easily put
things with their daemons and crossreference nicely.
Signed-off-by: David Lamparter <equinox@diac24.net>
The Vrf aliases can be known with a specific hook. That hook will then,
from zebra propagate the information to the relevant zapi clients.
The registration hook function is the same for all daemons.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Coverity warns about a possible double free; add an assert to make sure
we never hit it, and hopefully silence Coverity.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The correction in commit 7edb6aa (PR #2502) was wrong, as it is was not
taking in consideration the unlock counter. Thanks to @eqvinox for noticing
it.
Signed-off-by: F. Aragon <paco@voltanet.io>
There is no need to check for failure of a ALLOC call
as that any failure to do so will result in a assert
happening. So we can safely remove all of this code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Don't show BFD commands with timers since it might confuse users
("show running-config" won't display timers in client daemons anymore),
but keep accepting this command from previous configurations.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
When BFD timers are configured, don't show it anymore in the daemon
side. This will help us migrate the timers command from daemons to
`bfdd`.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
When calling route_map_finish, every place that we do we must
first set the deletion event to NULL, or we will create an infinite
loop, if we are using the delayed route-map application code.
As such we might as well just make the route_map_finish code
do this work, as that there is really no viable alternative here
and route_map_finish should only be called on shutdown.
This fixes an infinite loop in zebra on shutdown when there
are route-maps.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
It should have the same behavior when debug not enabled, and slightly
different behavior when debug enabled (previously dead code now should
show debug messages in debug mode)
Signed-off-by: F. Aragon <paco@voltanet.io>
Previous fix was incomplete, as calling ospf6_lsa_unlock() frees 'req' but
it does not put it to zero, so it was called ospf6_lsdb_remove() afterwards
even being 'req' already freed.
Signed-off-by: F. Aragon <paco@voltanet.io>
With a new version of clang 6.0, the compiler is detecting more
issues where we may be possibly be truncating the output string.
Fix by increasing the size of the output string to make the compiler
happy.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Programs that link to libnetsnmp must be compiled using a special set
of flags as specified by the "net-snmp-config --base-cflags" command
(whose output is stored in the SNMP_CFLAGS variable). The problem is
that "net-snmp-config --base-cflags" can output -std=c99 in addition to
other compiler flags in some platforms, and this breaks the build since
FRR souce code makes use of some GNU compiler extensions (e.g. allow
trailing commas in function parameter lists). In order to solve this
problem, append -std=gnu99 after SNMP_CFLAGS in all makefiles where this
variable is used. This way the -std=c99 flag will be overwritten when it's
present. Source files that don't link to libnetsnmp will be compiled using
either -std=gnu99 or -std=gnu11 depending on the compiler availability.
Fixes#1617.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Inter Area Prefix LSA ECMP is not working properly.
Two ABRs advertising IAP routes to backbone, not installed
with correct cost or if ABR restarted the route is removed
from backbone.
The current implementation ABR was not suppressing IAP update
for prefix cost is not better or route is not installed.
The better cost or path route was overwritten with non optimal
cost. This caused a loop with nexthops pointing each other
at backbone and non-backbone routers.
Consider to only send BEST/installed route's IAP notification
at ABRs.
When receiving IAP update from multiple ABRs, preserve multiple
advertising routers under the prefix route node.
Upon LSA maxage only remove the advertising route's which is
impacted and update route's nexthops and update FIB.
Testing Done:
Top to Bottom is part of area 0 on the Right, and
from Left side in area 1.
Top and Bottom act as ABRs.
H1 route is sent as Inter-Area Prefix to Right.
Trigger multiple triggers for ABR routes.
1) Shutting down link between, top to right to eliminate nhs
2) Restart frr at Top.
3) Restart frr at Right.
+-----------+
. |
,'| Top |`.
/ . | \
,' ,'+.----------+`. `.
/ / ` `. \ ',
,' ,' ,' \ `. .
- / ` `. ', `,
,` ,` ,' \ \ \
' - ` `. `, `,
+--------+ +--`--`--`--+ +---'---'--'+ +--------+
| | | | | | | |
| H1 ------ Left | | Right ------ H2 |
| | | | | | | |
+--------+ +-----------+ +----.--,-,-+ +--------+
`. ` \ - / /
\ `. ` ,' .` `
' . \ / / '
`. \ `. ` / ,'
\ ` . ,` / /
`. `. . / / /
\ . \ ,' ' /
' '--'--------+,'.`
`.| - /
' mid1 |/
| -
+-----------+
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Use brouter table to fetch nexthops for
asbr prefix (external) routes.
Change adv. router of the router's path once
the DB/FIB is updated with effective nexthops.
Cleanup of nexthop update when route's adv
router changes cost.
Ticket:CM-16139
Testing Done:
Tested ASBR external routes in CLOS topology with
multiple paths asbr originator at tor to spine.
Validated external route's nexthop within
area and inter area.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
During Intra brouter calculation, brouters will be
marked for remove. if one of the brouter is removed,
as part of its remove callback, ospf6_abr_examin_summary
is performed where marked for brouter would be removed.
Since refcount of next brouter node still higher, it will
retain one node with dangled next brouter pointer.
When intra brouter calculation iteration goes to next node,
where accessing free node causes a crash.
Ticket:CM-20807
Testing Done:
Configure multilple ABR routers between area 0 and area x, y.
Remove ospf6 configuration on area x, y abrs and check area 0
Intra brouter calculations.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Avoid duplicate ABR brouter entry and
its nexthops.
The route lookup results in first element of the
route/redix node. In case of Intra and inter area
brouter, the first element always intra brouter.
the first element comparison results in always addition
of new element for inter area brouter in brouter table.
Now, iterate all elements of the route node and compare
for brouter origin, if it is same simply update its
nexthops to FIB.
brouter and brouter route nexthops should be merge to avoid
duplicate nexthops for the inter area routes.
Ticket:CM-20807
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
When there are multiple advertisers/paths to reach
Intra-Prefix route, if any path is removed,
re-added back, it does add to the same route node.
ospf6 intra prefix, first stored in oa->route_table
then as part of add cb, it would add to ospf6->route_table
which adds to FIB.
When copying a route with its paths & NHs from oa->table to
ospf6->table the path origin should not be modified otherwise
ospf6->table would not find existing node rather it appends
new node.
Use spf_table to fetch nexthops for a given advertisers/path,
to form effective nexthop list for a route.
Ticket:CM-16139
Testing Done:
R2 ---- R3
| |
R1 ---- R4
Inject Intra Ara Prefix LSA from R1 & R3, validate R2 and R4
having two origination point/paths to reach for a route.
Trigger link flap, frr restart or remove/readd R3's INP one of the
injection point.
Remove link between R4 to R1 and validate R3 carrying single
path to reach prefix.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Durig ospf6 instance cleanup all border routers
are removed from the db then external LSAs removal
from DB is triggered. During the time, external route
path would not be valid as brouters along with its
rechability have vanished.
For a given external route removal check if no more
paths available simple remove the route from route db.
Ticket:CM-20669
Testing Done:
Bring up ASBR configuration with ECMP paths to a route.
Bring down the ospf6 instance and validate route is removed
from the DB.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
When neighbor state transition from LOADING to
FULL state, active full neighbors count incremented.
The full neighbors count is used for router-id change
if any full neighbor exist, displays message to restart
ospf6/frr to activate new router-id.
In the case of P-t-P neighbor type neighbor transition
from EXCHANGE to FULL which missed full neighbors count.
Ticket:CM-20574
Testing Done:
Initially, Bring up zebra assigned router-id in ospf6
with point-to-point link based neighbor.
Configure static router-id where restart of ospf6 message
is displayed.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Handle ECMP for Intra Area Prefix LSAs routes.
Ticket:CM-16139
Testing Done:
Configure ospf6 passive interface R2 and R3 with
same prefix address.
Check Intra Area Prefix LSA update at R1 and R3
which would have ECMP paths with effective two
paths and two nexthops (from R2 and R4).
stop frr at R3 and R1 and R4 route changes back to
one nexthop and one paht.
R1 ---- R2
| |
R3 ---- R4
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
When two routers from same area connected to backbone,
intra route advertised from area x should take precedence
within area x. The same route would be injected as summary
lsa to area 0/y. The same LSA via second abr injected back to
area x and since area 0 is lower than area x its route take
precedence.
Move the area check below path type and cost as both are crucial
to determine best route.
Ticket:CM-19627
Testing Done:
Initial route generated via area 1 as Intra-Prefix LSA (2009).
R1 and R2 both re advertised Inter Area Prefix LSA
(Summary LSA 2003) to area 1.
With the change area 1 Intra route precedence is preserved.
The address of H1 from Right is reachable via ping.
area 1 | area 0
R1
/ \
/ \
/ \
H1 --Left Right
\ /
\ /
\ /
R2
area 1 | area 0
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
During Intra area border router calculation, all
border routers are marked for remove from brouter table.
Once SPF calculation is done, retain inter area
border router if the adv. intra border router (abr)
is present in SPF table.
Ticket:CM-20171
Testing Done:
Validated inter area ASBR (L1) is retained at
R1 and R2 post intra border router calculation.
L1 -- (area 1)-- L2 -- (area 0) -- R1 --- R2
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
We create route_to_del and then on the error path
we are not properly freeing it up. Let's clean it
up for the goodness of mankind.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we have a interface disabled in ospfv3 and
we are receiving messages on it. We will spam
the log file repeatedly. Debug guard the message.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Initially INP LSA is originated, when connected
interface comes up. As neighbor is not up, LSA is
not transmitted but stored in DB.
As NSM transition to FULL, INP is scheduled but
ospf6_flood() would not originate the LSA as
current DB and new INP LSA same so it discards
the new LSA.
When Neighor becomes FULL, originate INP via
flushing current DB copy and generate new.
This is introduced as PR 1738 introduce,
premature aging of LSAs in nbr table as R1
going down. upon neigbor coming up, INP was
not updated to new age.
Ticket:CM-19926,CM-19945
Testing Done:
Topology R3 --- R1 -- R2, R1 have INP LSA.
After frr restart R2 and R3 re learnt R1's
INP LSA as new neighbor(s) come up.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Store zebra router-id in global structure.
Before router ospf6 instance created,
zebra router-id callback called.
During ospf6 main execution zebra init happens,
but default instance does not execute until
cli replay 'router ospf6'.
Call ospf6_router_id_change during 'router ospf6'
to assign zebra router id to ospf6 instance.
Ticket:CM-19937
Testing Done:
Assign Loopback /32 (6.6.6.6/32) address,
restart frr with (router ospf6 in frr.conf).
ospf6 default instance assigned 6.6.6.6 router-id.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
The route being added check its origin matches,
with any of the existing path (list of paths).
Remove the existing path, add if its cost is
eqaual or less than any of the existing path.
For a given route and of existing path cost is lower
(better) than one being added, discard new route update.
The existing path cost is higher (lower) than one being
added, ospf6_route_add replaces existing with new route
info.
Compare cost between delete request and with existing
route.
Ticket:CM-16139
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Notify user to store config and restart ospf6d
as part of router-id change cli if any of
the area active.
Store zebra router-id under ospf6, when static
router-id removed restore zebra router-id, ask
to restart ospf6d.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
RFC 2328 (14.1) Premature aging of LSAs from
routing domain :
When ospf6d is going away (router going down),
send MAXAGEd self originated LSAs to all
neighbors in routing domain to trigger
Premature aging to remove from resepective LSDBs.
Neighbor Router Reboot:
Upon receiving Self-originate MAXAGEd LSA, simply
discard, Current copy could be non maxaged latest.
For neighbor advertised LSA's (current copy in LSDB)
is set to MAXAGE but received new LSA with Non-MAXAGE
(with current age), discard the current MAXAGE LSA,
Send latest copy of LSA to neighbors and update the
LSDB with new LSA.
When a neighbor transition to FULL, trigger AS-External
LSAs update from external LSDB to new neighbor.
Testing:
R1 ---- DUT --- R5
| \
R2 R3
|
R4
Area 1: R5 and DUT
Area 0: DUT, R1, R2, R3
Area 2: R2 R4
Add IPv6 static routes at R5
Redistribute kernel routes at R5,
Validate routes at R4, redistributed via backbone
to area 2.
Stop n start frr.service at R5 and validated
MAXAGE LSAs then recent age LSAs in Database at DUT-R4.
Validated external routes installed DUT to R4.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
There exists a possibility that rtr_lsa may be null.
Add an assert that shows we actually expect it to
be non-null at this point in time going forward.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
