Separate out the debug_init api to have 2 functions:
1) Function to register a callback
2) Function to initiate the cli.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Allow multiple callers to initialize themselves to receive
callbacks for debug on/off operations.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The SO_MARK socket option was being used pre vrf to allow for the
separation of the front panel -vs- the management port. This
was facilitated by a ip rule. Since this is undocumented anywhere
in our system( other than old commits see
ed40466af8 ). We should remove this
because this will cause interference with people using rules
and are not aware of this offshoot of functionality.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Upon startup FRR reads in the MAX_FDS variable from
it's control files via the getrlimit call. We then
setup code to limit the poll data structure size to
that value. The OS also limits our FD's to that value
because that is what is set. Provide a methodology
that a interested end user can figure this data out.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The 'show thread cpu' command referenced a 'b' option. Which
is not parsed at all in the parse_filter function. As such
I do not know what this was referencing as that it has been
removed. Update the help strings to reflect this reality.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* Change 'begins_with' to 'frrstr_startswith' for consistency
* Add suffix checker, frrstr_endswith()
* Update vtysh to use the new function
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Allow label ignoring when comparing nexthops. Specifically,
add another functon nexthop_same_no_labels() that shares
a path with nexthop_same() but doesn't check labels.
rib_delete() needs to ignore labels in this case.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Refactor the gatway and source nexthop comparision into a
common code path that compares them explicitly based on
their address family.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
The functions nexthop_same() does not check the resolved
nexthops so I don't think this function is even needed
anymore.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
This is necessary to avoid a name collision with std::for_each
from C++.
Fixes the compilation of the gRPC northbound module.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Passing the struct route_table *ptr as const doesn't really help; if
anything it semantically would imply that the returned route_node is
const too since constness should propagate (but it doesn't in C.)
The right thing to do here - which actually helps the compiler optimize
the code too - is to tag functions with __attribute__((pure)). The
compiler does this automatically if it has the function body (and the
body of all called functions) available. That should cover most "static
inline" functions in headers, as well as functions in the same file.
However, this doesn't work (at least without LTO) for extern functions.
Hence, add "ext_pure" for this case. (Built-in "extern" to make lines
shorter.)
Signed-off-by: David Lamparter <equinox@diac24.net>
Working with a proper struct route_node gets us around a bunch of weird
casts here and makes the code slightly more robust.
Signed-off-by: David Lamparter <equinox@diac24.net>
Only noticed this when trying to add atomlists to the typesafe
datastructure tests... the atomic-specific test_atomlist doesn't use
init/fini :/
Signed-off-by: David Lamparter <equinox@diac24.net>
This is an 8-ary heap (cacheline optimized.) It works as a semi-sorted
kind of middle ground between unsorted and sorted datastructures; pop()
always returns the lowest item but ordering is only loosely enforced.
Signed-off-by: David Lamparter <equinox@diac24.net>
Turns out we need one of these. Same API as DECLARE_LIST, but deleting
random items is much faster.
Signed-off-by: David Lamparter <equinox@diac24.net>
The skiplist code was previously falling back to the del() code path for
a pop() on a skiplist. This is unneeded complexity, a pop() can be done
more efficiently.
Signed-off-by: David Lamparter <equinox@diac24.net>
VRRP doesn't install any routes, but should still have an array entry.
Also add a help string for VRRP to route_types.txt
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Add convenience functions to compute the Internet checksum of a data
block, including a pseudoheader.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Search for macvlan interfaces with the appropriate name and MAC
address when starting up a new VRRP instance
* Split VRRP socket into two; one for Tx, one for Rx
* Bind Tx socket to the macvlan subinterface so our VRRP advertisements
go out with the correct MAC address
* Send ARP requests from this macvlan subinterface
* Improve error messaging
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Compiling FRR w/ gcc 9.1 and --enable-werror generates some
issues that need to be cleaned up.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
1. listnode_add_sort_nodup - This API adds to list only if no duplicate
element available in the list. returns true/false
2. list_filter_out_nodes - This API deletes the nodes which satisfy the given
condition. condition is passed as a func ptr in
API. This function takes in node data(void ptr).
Signed-off-by: Saravanan K <saravanank@vmware.com>
It doesn't make much sense for a hash function to modify its argument,
so const the hash input.
BGP does it in a couple places, those cast away the const. Not great but
not any worse than it was.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Add an upspecified option to the AFI enum and update
switch statements using it in bgpd and pbrd.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
new vty command is added:
neighbor XXX bfd check-control-plane-failure
this command will enforce the check of bgp controlplane, when bfd
detects changes in the dataplane.
- at configuration, the cbit will be set if that command is executed
- at flapping time, if the command is configured and remote cbit is set
accordingly, then the bfd event will be ignored.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
bfd cbit is a value carried out in bfd messages, that permit to keep or
not, the independence between control plane and dataplane. In other
words, while most of the cases plan to flush entries, when bfd goes
down, there are some cases where that bfd event should be ignored. this
is the case with non stop forwarding mechanisms where entries may be
kept. this is the case for BGP, when graceful restart capability is
used. If BFD event down happens, and bgp is in graceful restart mode, it
is wished to ignore the BFD event while waiting for the remote router to
restart.
The changes take into account the following:
- add a config flag across zebra layer so that daemon can set or not the
cbit capability.
- ability for daemons to read the remote bfd capability associated to a bfd
notification.
- in bfdd, according to the value, the cbit value is set
- in bfdd, the received value is retrived and stored in the bfd session
context.
- by default, the local cbit announced to remote is set to 1 while
preservation of the local path is not set.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
A few of the functions in openbsd's RB tree implementation
needed to have const in their parameters.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
The CLI grammer sandbox needs to initialize the northbound subsystem
otherwise the running_config global variable won't be set, which
leads to crashes.
Fixes#4319.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The route_map_event_hook callback was passing the `route_map_event_t`
to each individual interested party. No-one is ever using this data
so let's cut to the chase a bit and remove the pass through of data.
This is considered ok in that the routemap.c code came this way
originally and after 15+ years no-one is using this functionality.
Nor do I see any `easy` way to do anything useful with this data.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
From looking at a current PR: #4297, we see that routemap.c code
was not properly updating dependency information for some
route_map_event_t enum types. This has lead to dependancy
information not being updated properly. While at this time
I do not know whether or not we need to update the switch
for the missing types, I do know that if we add something in
the future we should make the person adding the code consider
this. So let's remove all `default:` switch statement handlers
from routemap.c when switching on an enum. Future time will
need to be spent to figure out what is needed to be done here.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Each of Lua's major versions are incompatible with each other. Ubuntu,
at least, does not provide a single liblua.so or /usr/include/lua; all
SOs and headers are versioned, e.g. liblua5.3.so and
/usr/include/lua5.3. There's already an m4 macro in the GNU collection
to handle this situation, so let's use that.
This allows building with Lua enabled to work on platforms other than
Fedora.
* Move lib/lua.[ch] -> lib/frrlua.[ch] to prevent path conflicts
* Fix configure.ac search for proper CPP and linker flags
* Add Lua include path to AM_CPPFLAGS
* Update vtysh/extract.pl.in
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This fix aims to reduce the load on BGPD when certain
exisiting configurations are replayed.
Specifically, the fix prevents BGPD from processing
routes when the following already existing configurations
are replayed:
1) A match criteria is configured within a route-map.
2) When "call" is invoked within a route-map.
3) When a route-map is tied to a BGP neighbor.
Signed-off-by: NaveenThanikachalam <nthanikachal@vmware.com>
Route map library creates a hash table to save the dependency binding.
route-map LRM permit 1
call rLRM
Whenever there is change in child routemap(rLRM), it tries to
find the dependency mapping with the child route map MATCH event
and it fails.The handing of match add and match delete was missing
to get the correct dependency,here it's LRM.
This fix would correct the flow to get the correct dependency.
Signed-off-by: vishaldhingra <vdhingra@vmware.com>
vrf_id parameter is added to the api of bfd_client_sendmsg().
this permits being registered to bfd from a separate vrf.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This is an extension to previous behavior, where the bind() operation
was performed only when vrf was not a netns backend kind. This was done
like that because usually the bind parameter is the vrf name itself, and
having an interface name with vrf name is an expectation so that the
bind operation works.
the bind() operation can be performed on whatever device provided that
that name is not null and there is an interface in the vrf that has the
same name as the parameter.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
libyang 1.0 introduced a few changes in the user types API, and
these changes made FRR incompatible with libyang 1.x. In order to
ease our migration from libyang 0.x to libyang 1.x, let's disable
our libyang custom user types temporarily so that FRR can work
with both libyang 0.x and libyang 1.x. This should be especially
helpful to the CI systems during the transition. Once the migration
to libyang 1.x is complete, this commit will be reverted.
Disabling our libyang custom user types should have only
minimal performance implications when processing configuration
transactions. The user types infrastructure should be more important
in the future to perform canonization of YANG data values when
necessary.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This macro:
- Marks ZAPI callbacks for readability
- Standardizes argument names
- Makes it simple to add ZAPI arguments in the future
- Ensures proper types
- Looks better
- Shortens function declarations
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The vrf_with_default_name vrf variable is set to NULL
and then tested to see if it is valid. Removing the
dead code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This converts the new table code to use the new hash
type provided by David.
The following test is 1 million routes installed and how
much memory we are using:
Old mem usage:
Memory statistics for zebra:
System allocator statistics:
Total heap allocated: 574 MiB
Holding block headers: 0 bytes
Used small blocks: 0 bytes
Used ordinary blocks: 536 MiB
Free small blocks: 33 MiB
Free ordinary blocks: 4600 KiB
Ordinary blocks: 0
Small blocks: 0
Holding blocks: 0
New Memory usage:
Memory statistics for zebra:
System allocator statistics:
Total heap allocated: 542 MiB
Holding block headers: 0 bytes
Used small blocks: 0 bytes
Used ordinary blocks: 506 MiB
Free small blocks: 3374 KiB
Free ordinary blocks: 33 MiB
Ordinary blocks: 0
Small blocks: 0
Holding blocks: 0
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We should not be modifying the pointer for the prefix_hash_key
function, make it a const so that we can use it elsewhere.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The head of a list should not change for find functions. Probably
are others that should be considered but these changes can come
in as needed I believe.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This converts the new table code to use the new hash
type provided by David.
The following test is 1 million routes installed and how
much memory we are using:
Old mem usage:
Memory statistics for zebra:
System allocator statistics:
Total heap allocated: 574 MiB
Holding block headers: 0 bytes
Used small blocks: 0 bytes
Used ordinary blocks: 536 MiB
Free small blocks: 33 MiB
Free ordinary blocks: 4600 KiB
Ordinary blocks: 0
Small blocks: 0
Holding blocks: 0
New Memory usage:
Memory statistics for zebra:
System allocator statistics:
Total heap allocated: 542 MiB
Holding block headers: 0 bytes
Used small blocks: 0 bytes
Used ordinary blocks: 506 MiB
Free small blocks: 3374 KiB
Free ordinary blocks: 33 MiB
Ordinary blocks: 0
Small blocks: 0
Holding blocks: 0
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We should not be modifying the pointer for the prefix_hash_key
function, make it a const so that we can use it elsewhere.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The head of a list should not change for find functions. Probably
are others that should be considered but these changes can come
in as needed I believe.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Replaces the use of pqueue_* for the thread_master's timer list with an
instance of DECLARE_SKIPLIST_*.
Signed-off-by: David Lamparter <equinox@diac24.net>
Replaces the open-coded thread_list with a DECLARE_LIST instantiation.
Some function prototypes are actually identical to what was previously
open-coded.
Signed-off-by: David Lamparter <equinox@diac24.net>
These two are lock-free linked list implementations, the plain one is
primarily intended for queues while the sorted one is for general data
storage.
Signed-off-by: David Lamparter <equinox@diac24.net>
Typesafe red-black tree, built out of the OpenBSD implementation and the
macro soup layered on top. API compatible with skiplists & simple
lists.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
By the power of the C preprocessor, these macros provide type-safe
warppers for simple lists, skiplists and hash tables. Also, by changing
the instantiation macro, it is easily possible to switch between
algorithms; the code itself does not need to be changed since the API
is identical across all algorithms.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The upcoming gRPC-based northbound plugin will run on a separate
pthread, and it will need to have access to the running configuration
global variable. Introduce a rw-lock to control concurrent access
to the running configuration. Add the lock inside the "nb_config"
structure so that it can be used to protect candidate configurations
as well (this might be necessary depending on the threading scheme
of future northbound plugins).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The ability to lock the running configuration to prevent other users
from changing it is a very important one. We already supported
the "configure exclusive" command but the lock was applied to
the CLI users only (other clients like ConfD could still commit
configuration transactions, ignoring the CLI lock). This commit
introduces a global lock for the running configuration that is
shared by all northbound clients, and provides a public API to
manipulate it. This way other northbound clients will also be able
to lock/unlock the running configuration if required (the upcoming
gRPC northbound plugin will have RPCs for that).
NOTE: this is a management-level lock for the running configuration,
not to be confused with low-level locks used to avoid data races.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Prevent IPv6 routes received via a ibgp session with one of its own interface
ip as nexthop from getting installed in the BGP table.
Implemented IPV6 HASH table, where we need to add any ipv6 address as they
gets configured and delete them from the HASH table as the ipv6 addresses
get unconfigured. The above hash table is used to verify if any route learned
via BGP has nexthop which is equal to one of its its connected ipv6 interface.
Signed-off-by: Biswajit Sadhu sadhub@vmware.com
Fixup in response to Jafar's review comments.
This is actually old code moved in from pimd to lib. But the fixup does
make sense.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
These updates act as triggers to pimd to -
1. join the MDT for rxing VxLAN encapsulated BUM traffic
2. register the local-vtep-ip as a source for the MDT
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
IMET route is optional if the flood mode is PIM-SM and serves
no functional purpose. So this change limits type-3 route generation
to flood-mode=head-end-replication.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
This solves a crash that happens if the "route-map" command is used
after "router rip" + "no router rip" + "router rip".
Once interface route-maps are converted to the new northbound model,
we'll be able to remove the if_rmap_ctx_list global list (which is
an ugly hack to make things work right now).
Bug found by the CLI fuzzer.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Found that zebra_rnh_apply_nht_rmap would set the
NEXTHOP_FLAG_ACTIVE if not blocked by the route-map, even
if the flag was not active prior to the check. This fix
changes the flag used to denote the nexthop is filtered so
that proper active state can be retained. Additionally,
found two cases where we would send invalid nexthops via
send_client, which would also cause this crash. All three
fixed in this commit.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
The NEXTHOP_FLAG_FILTERED went away when we started treating
static routes like every other route in the system. This was
a special case for handling static route code that just didn't
get finished cleaning up.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Certain operations, like removing non-presence containers or
modifying list keys, are not considered to be valid from the
perspective of the northbound layer. This is because we want to
implement a minimum set of northbound configuration callbacks and
use them to process all possible configuration changes.
The removal of a np-container [1], for example, can be processed by
calling the "delete" callback of all of its child nodes (recursion
is used for np-container child nodes). Similarly, the modification
of a list key can be processed as if the corresponding list entry
was removed and readded with updated key values. This strategy saves
us the burden of implementing lots of extra configuration callbacks.
That said, the nb_operation_is_valid() function shouldn't be used
for anything other than checking which callbacks are valid for
which YANG nodes. Using it in the nb_candidate_edit() function
is inappropriate as we want as much flexibility as possible when
editing a candidate configuration. We should allow CLI commands,
for example, to remove np-containers (the northbound layer will then
figure out which callbacks need to be called when this candidate
is committed). Remove the check.
[1] We can't do the same for presence containers since they have a
"create" callback associated with them.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
flog() is a small wrapper around zlog() that can be useful in a
few places to reduce code duplication.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
zlog() should be part of the public logging API as it's useful in
the cases where the logging priority isn't known at compile time
(i.e. it depends on a variable).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Move call to nb_db_init() from nb_init() to frr_init() so that only
the FRR daemons will initialize the northbound database. This should
fix a few warnings when running some unit tests.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Introduce a hash table to keep track of user pointers associated
to configuration entries. The previous strategy was to embed
the user pointers inside libyang data nodes, but this solution
incurred a substantial performance overhead. The user pointers
embedded in candidate configurations could be lost while the
configuration was being edited, so they needed to be regenerated
before the candidate could be committed. This was done by the
nb_candidate_restore_priv_pointers() function, which was extremely
expensive for large configurations. The new hash table solves this
performance problem.
The yang_dnode_[gs]et_entry() functions were renamed and moved from
yang.[ch] to northbound.[ch], which is a more appropriate place
for them. This patch also introduces the nb_running_unset_entry()
function, the counterpart of nb_running_set_entry() (unsetting
user pointers was done automatically before, now it needs to be
done manually).
As a consequence of these changes, we shouldn't need support for
libyang private pointers anymore (-DENABLE_LYD_PRIV=ON). But it's
probably a good idea to keep requiring this feature as we might
need it in the future for other things (e.g. disable configuration
settings without removing them).
Fixes#4136.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Manually tested rather extensively in addition to included unit tests,
should work as intended.
NB: The OpenBSD futex() code is "future"; it's not actually in OpenBSD
(yet?) and thus untested.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
After exceeding the max retry number for a thread,
we were passing the data rather than the work_queue_item
struct.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
MD5 auth on TCP is supported for prefixes in recent versions of Linux;
add complementary support for FRR.
This is a reworked version of Donald's commit to keep library
compatibility and obviate the need for changes in daemons that don't
need to support this themselves.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Split the "debug northbound" command into the following commands:
* debug northbound callbacks configuration
* debug northbound callbacks state
* debug northbound callbacks rpc
* debug northbound notifications
* debug northbound events
* debug northbound client confd
* debug northbound client sysrepo
If "debug northbound" is entered alone, all of its suboptions
are enabled.
This commit also adds code to debug state/rpc callbacks and
notifications (only configuration callbacks were logged before).
Use the debugging infrastructure from "lib/debug.h" in order to
benefit from its facilities (e.g. MT-safe debugging) and avoid
code duplication.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The IFF_OUT_LOG macro is using BUFSIZE, which is the sizeof(logbuf)
but for some reason 8.0 clang SA is not happy with it. Just
make it happy.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add a hash function to turn a nexthop group into a
32 bit unsigned hash key with jhash. We do not care to
hash any recursively resolved nexthops, just the group.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Avoid tracking 0.0.0.0/32 nexthop with RIB.
When routes are aggregated,
the originate of the route becomes self.
Do not track nexthop self (0.0.0.0) with rib.
Ticket: CM-24248
Testing Done:
Before fix-
tor-11# show ip nht vrf all
VRF blue:
0.0.0.0
unresolved
Client list: bgp(fd 16)
VRF default:
VRF green:
VRF magenta:
0.0.0.0
unresolved
Client list: bgp(fd 16)
After fix-
tor-11# show ip nht vrf all
VRF blue:
VRF default:
VRF green:
VRF magenta:
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Adjust the nexthop comparison api so that it calls the label-
comparison api. Adjust the label-comp api so that "no labels"
is "equal".
Signed-off-by: Mark Stapp <mjs@voltanet.io>
PR #3622 renamed the "delete" northbound callback to "destroy" in
order to make the libfrr headers compatible with C++. This commit
renames a few functions that still use "delete" instead of "destroy"
in their names.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Merge commit to solve a bunch of conflicts with other PRs that were
merged in the previous weeks.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
that routine does the same as listnode_add; in addition it creates the
linked list if needed.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
lists passed as parameter that are null, are accepted by the function.
I would even propose to silently return NULL in official
listnode_lookup() routine.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Problem found in bgpd where it wasn't learning interface address
information at startup due to the interface information becoming
available before the bgp instance was created. This issue was
caused by an earlier change that tried to make the interface
information discovery process more efficient but left this hole
for bgpd. For now, putting back in the previous method of
gathering interface info via the zclient_send_reg_requests call
and will revisit a more efficient way to get the info in the future.
Ticket: CM-23932
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Add a few missing log entries to the macro to allow us to print
out the zapi message type, since they were missing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Use the privs struct mutex more strictly, to ensure that the
privs are at the level the caller expects when the apis
return.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Privs escalation is process-wide, and a multi-threaded process
can deadlock. This adds a mutex and a counter to the privs
object, preventing multiple threads from making the privs
escalation system call.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Non-presence containers don't have "destroy" callbacks. So, once
a np-container is deleted, we need to call the "destroy" callbacks
of its child nodes instead.
This commit doesn't fix any real problem as of now since all
np-containers from the FRR YANG modules contain or one more mandatory
child nodes, so they can't be deleted (libyang will add missing
np-containers when validating data). Nevertheless, upcoming YANG
modules should benefit from this change.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is just a small refactoring to reduce code duplication. No
behavior changes intended.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
In the case of EVPN symmetric routing, the tenant VRF is associated with
a VNI that is used for routing and commonly referred to as the L3 VNI or
VRF VNI. Corresponding to this VNI is a VLAN and its associated L3 (IP)
interface (SVI). Overlay next hops (i.e., next hops for routes in the
tenant VRF) are reachable over this interface. Howver, in the model that
is supported in the implementation and commonly deployed, there is no
explicit Overlay IP address associated with the next hop in the tenant
VRF; the underlay IP is used if (since) the forwarding plane requires
a next hop IP. Therefore, the next hop has to be explicit flagged as
onlink to cause any next hop reachability checks in the forwarding plane
to be skipped.
https://tools.ietf.org/html/draft-ietf-bess-evpn-prefix-advertisement
section 4.4 provides additional description of the above constructs.
Use existing mechanism to specify the nexthops as onlink when installing
these routes from bgpd to zebra and get rid of a special flag that was
introduced for EVPN-sourced routes. Also, use the onlink flag during next
hop validation in zebra and eliminate other special checks.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
After creating a libyang context, we need to hook up our callback to use
embedded built-in modules. I hadn't added this to the yang translator
code.
Also, ly_ctx_new fails if the search directory doesn't exist. Since
that's not a hard error for us, work around that and ignore inaccessible
YANG_MODELS_DIR. (This is needed for snap packages.)
Signed-off-by: David Lamparter <equinox@diac24.net>
an interface rmap context can be created from a custom name string,
instead of a vrf. This ability permits to handle several instances of
interface route map in the same vrf. The naming convention will be
transparent on what the name is for in the daemon code.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
so as to handle ri/ripng/eigrp multiple instances, the need is to
encapsulate if_rmap hash table into a container context self to each
instance. This work then reviews the if_rmap api, mainly by adding a
if_rmap_ctx context, that is passed for each exchange between library
and the daemon.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
When displaying the running configuration, we should use a single
space to indent commands when necessary (and not two spaces).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This patch adds support to nexthops of type NEXTHOP_TYPE_IFINDEX to
nexthop-groups. This should be especially useful when dealing with
p2p interfaces like tunnels that don't have IP addresses assigned
to them.
NOTE: nh->addr can be NULL now, so we should always perform a null
check before dereferencing this pointer.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Use a pointer to a sockunion instead of a full sockunion in the
nexthop_hold structure. This prepares the ground for the next commit,
which will make nexthop addresses optional (in this commit we assume
nh->addr will never be NULL, but this will change).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
* command_graph.h: stop using "new" as a parameter name as that's a
reserved C++ keyword.
* module.h: avoid using C99 designated initializers since C++ doesn't
support them. This change hurts code readability quite considerably,
so we should try to find a better solution later.
* pw.h: remove unneeded empty structure to silence a C++ warning.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
C++ doesn't support implicit casts from void pointers like C
does. And the libfrr headers have some bits of code that rely on
implicit casts in order to work. To solve this problem, add a new
"static_cast" macro that performs explicit static casts when a C++
compiler is being used, or do nothing otherwise.
NOTE: since macros are only evaluated when they are used, there
might be other macros from libfrr that will need to use "static_cast"
as well. If a header is successfully compiled using a C++ compiler,
there's no guarantee that its macros are compatible with C++. We'll
only know about such macros when they are used by C++ code, then
we'll need to adapt them one by one in the future.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Two different definitions of "enum filter_type" exist in libfrr:
one in lib/filter.h and other in lib/command_match.h. Rename one
of them to resolve a conflict that happens when both headers are
included by the same file.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
These are necessary to use functions defined in these headers from C++.
Signed-off-by: David Lamparter <equinox@diac24.net>
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
C++ doesn't have ISO C11 stdatomic.h or "_Atomic inttype", so use
std::atomic instead to get the headers compatible.
Signed-off-by: David Lamparter <equinox@diac24.net>
Add a no-op conversion constructor to tell C++ that union prefixptr
accepts any of its member types.
Signed-off-by: David Lamparter <equinox@diac24.net>
Change the northbound lib operation from DELETE to DESTROY;
make the required changes in the users of the northbound, in
the cli, rip, ripng, and isis.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Some misc changes to resolve some c++ compilation errors.
The goal is only to permit an external module - a plugin,
for example - to see frr headers, not to support or encourage
contributions in c++. The changes include: avoiding use
of keywords like 'new', 'delete'; cleaning up implicit
type-casting from 'void *' in several places.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
on interface search algorithm, at initialisation, when reading config
file, the vrf backend may not be yet known ( because zebra did not sync
yet with daemon). For that, avoid searching interface name in a separate
vrf. This change of behaviour is induced because the assumption is done
that at config startup, the user is not wrong with the interface
configuration to use. Every usage of vrf_get_backend() should then be
wisely adapted in order to handle that init state.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
other daemons need to sync with zebra to get to know which vrf backend
is available. in that time, there may be interface configuration
available. in that specific case, the vrf backend returned is not known.
A specific return value is sent back. This will be useful to know which
specific algorithm to apply.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Collapse the old static free function into the actual public
function that was using it (and the only user of it.)
Signed-off-by: Mark Stapp <mjs@voltanet.io>
This change is used to send configue changes for
advertise svi address as macip (type-2) route.
Ticket:CM-23782
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Ask for all interface information after we have connected
to zebra and sent the initial hello.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Made the following changes.
1.Defined two apis in routemap-lib, one for increment and another for
decrement the applied counter.
2.Added a new configuration “show route-map-unused” to track all unused
routemaps.
3.called the corresponding route map update api when a route map attached
or detached from any redistribution list.
Signed-off-by: RajeshGirada <rgirada@vmware.com>
If tcp_l3mdev_accept = 0, then creating a socket for a vrf
for communication is allowed. On the other hand if it is =1
then the vrf_socket() code assumes that we have created
a listen socket in the default vrf. This is a bad assumption
in that it is perfectly valid to create a bgp instance like this:
router bgp 99 vrf BLUE
<configuration>
!
But not to create a default bgp instance. As such when BGP
would call the vrf_socket to create the listener for that vrf
the code was dissallowing it.
This code is incorrect behavior. If we are passing in a interface
to bind the socket to, it is not the correct behavior to just not
bind, especially if the interface passed in is not a vrf name.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
- some target_CFLAGS that needed to include AM_CFLAGS didn't do so
- libyang/sysrepo/sqlite3/confd CFLAGS + LIBS weren't used at all
- consistently use $(FOO_CFLAGS) instead of @FOO_CFLAGS@
- 2 dependencies were missing for clippy
Signed-off-by: David Lamparter <equinox@diac24.net>
Apparently 'f' means both OpenFabric and a Failed kernel
route installation.
Let's switch the 'f' for the failed kernel route installation
to 'r - rejected route'.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The onlink attribute was being passed from upper level protocols
as an attribute of the route *not* the individual nexthop. When
we pass this data to the kernel, we treat the onlink as a attribute
of the nexthop. This commit modifies the code base to allow
us to pass the ONLINK attribute as an attribute of the nexthop.
This commit also fixes static routes that have multiple nexthops
some onlink and some not.
ip route 4.5.6.7/32 192.168.41.1 eveth1 onlink
ip route 4.5.6.7/32 192.168.42.2
S>* 4.5.6.7/32 [1/0] via 192.168.41.1, eveth1 onlink, 00:03:04
* via 192.168.42.2, eveth2, 00:03:04
sharpd@robot ~/frr2> sudo ip netns exec EVA ip route show
4.5.6.7 proto 196 metric 20
nexthop via 192.168.41.1 dev eveth1 weight 1 onlink
nexthop via 192.168.42.2 dev eveth2 weight 1
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we are selecting nexthops for disply, abstract the notion
of what character we display to the end user about the status
of the nexthop.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
MACVLAN devices are typically used for applications such as VRR/VRRP that
require a second MAC address (virtual). These devices have a corresponding
SVI/VLAN device -
root@TORC11:~# ip addr show vlan1002
39: vlan1002@bridge: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9152 qdisc noqueue master vrf1 state UP group default
link/ether 00:02:00:00:00:2e brd ff:ff:ff:ff:ff:ff
inet6 2001:aa:1::2/64 scope global
valid_lft forever preferred_lft forever
root@TORC11:~# ip addr show vlan1002-v0
40: vlan1002-v0@vlan1002: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9152 qdisc noqueue master vrf1 state UP group default
link/ether 00:00:5e:00:01:01 brd ff:ff:ff:ff:ff:ff
inet6 2001:aa:1::a/64 metric 1024 scope global
valid_lft forever preferred_lft forever
root@TORC11:~#
The macvlan device is used primarily for RX (VR-IP/VR-MAC). And TX is via
the SVI. To acheive that functionality the macvlan network's metric
is set to a higher value.
Zebra currently ignores the devaddr metric sent by the kernel and hardcodes
it to 0. This commit eliminates that hardcoding. If the devaddr metric
is available (METRIC_MAX) it is used for setting up the connected route
otherwise we fallback to the dev/interface metric.
Setting the macvlan metric to a higher value ensures that zebra will always
select the connected route on the SVI (and subsequently use it for next hop
resolution etc.) -
root@TORC11:~# vtysh -c "show ip route vrf vrf1 2001:aa:1::/64"
Routing entry for 2001:aa:1::/64
Known via "connected", distance 0, metric 1024, vrf vrf1
Last update 11:30:56 ago
* directly connected, vlan1002-v0
Routing entry for 2001:aa:1::/64
Known via "connected", distance 0, metric 0, vrf vrf1, best
Last update 11:30:56 ago
* directly connected, vlan1002
root@TORC11:~#
Ticket: CM-23511
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
When a local neigh is added with a MAC that is remote or absent the
neigh is kept in zebra as local/in-active. But not propagated to bgpd.
Similarly when an inactive neigh is deleted the del-msg is not propagated
to bgpd.
Without this change bgp and zebra would fall out of sync as that
bgp would not know to rerun bestpath and for it to reinstall a
known remote path for the mac-ip in question. To fix this we
now propagate inactive neigh deletes to bgpd.
Ticket: CM-23018
Testing Done:
1. evpn-min
2. manually triggered the out-of-sync state and verified the fix
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
FRR log targets are independent, so "log syslog" must not disable
"log file" output.
Fixes: #3551
Fixes: 0204baa876
Signed-off-by: David Lamparter <equinox@diac24.net>
Starting with libyang 0.16.74, we can load internally embedded yang
extensions instead of going through the file system/dlopen. Detect
support for this at build time and use if available.
NB: the fallback mechanism will go away in a short while.
Signed-off-by: David Lamparter <equinox@diac24.net>
CC lib/frr_pthread.lo
lib/frr_pthread.c:128:40: error: too many arguments to function call, expected 1, have 3
ret = pthread_setname_np(fpt->thread, fpt->os_name, NULL);
~~~~~~~~~~~~~~~~~~ ^~~~~~~~~~~~~~~~~~
/Library/Developer/CommandLineTools/SDKs/MacOSX10.14.sdk/usr/include/pthread.h:512:1: note: 'pthread_setname_np' declared here
__API_AVAILABLE(macos(10.6), ios(3.2))
Mac OS does have pthread_setname_np, but we can't use it here since it
only accepts a single argument, the thread name, and thus only works for
the current thread.
Signed-off-by: Ruben Kerkhof <ruben@rubenkerkhof.com>
Now that all daemons receive the VRF backend from zebra, we can get
rid of vrf_is_mapped_on_netns() in favor of using the more convenient
vrf_is_backend_netns() function, which doesn't require any argument.
This commit also fixes the following problem:
debian(config)# ip route 50.0.0.0/8 blackhole vrf FAKE table 2
% table param only available when running on netns-based vrfs
Even when zebra was started with the --vrfwnetns, the error
above would be displayed since the VRF FAKE didn't exist, which
would make vrf_is_mapped_on_netns() return 0 incorrectly. Using
vrf_is_backend_netns() this problem doesn't happen anymore.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Add a new field in the ZEBRA_CAPABILITIES zapi message specifying
the VRF backend in use.
For simplicity, make the zclient code call vrf_configure_backend()
to apply the received value automatically instead of requiring
the daemons to do that themselves in their zebra_capabilities()
callbacks.
Additionally, call zebra_vrf_update_all() only after sending the
capabilities message to the client, so that it will know which VRF
backend is in use when processing the VRF messages.
This commit fixes a couple of bugs in the "interface" CLI command and
associated northbound callbacks, which behave differently depending
on the VRF backend in use. Before this commit, the vrf_backend
variable would always be set to VRF_BACKEND_NETNS in the client
daemons, even when zebra was started without the --vrfwnetns option.
This could lead to inconsistent behavior and subtle bugs under
specific circumstances.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
We can make use of the vty->config variable to know when the CLI
user is in the configuration mode or not. This is much simpler
than obtaining this information from the vty node, and also a more
robust solution (the three switch statements below, for example,
were out of sync).
Also, fix a bug where vty->config wasn't being unset in the
vty_config_exit() function (bug introduced by commit f344c66ea3).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The CLI code uses the vty->xpath[] array and the vty->xpath_index
variables to keep track of where the user is in the configuration
hierarchy. As such, we were resetting vty->xpath_index to zero
whenever the user exited from the configuration mode in order to
keep the index valid. We weren't doing this in the vty_stop_input()
function however, which is called when the user types ^C in the
terminal. This was leading to bugs like this:
zebra> en
zebra# conf t
zebra(config)# interface eth0
zebra(config-if)# ^C
zebra# conf t
zebra(config)# interface eth0
% Configuration failed.
Schema node not found.
YANG path: /frr-interface:lib/interface[name='eth0'][vrf='default']/frr-interface:lib
To fix this, do something more clever: instead of resetting the
XPath index whenever the user exits from the configuration mode,
do that when the user enters in the configuration mode. This way
the XPath index needs to be reset in a single place only, not to
mention it's a more robust solution.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When lyd_validate() is used with the LYD_OPT_DATA option, full YANG
validation is performed. As a side-effect to this, default nodes are
created, which is not desirable when displaying operational data
since configuration nodes can also be created. Use LYD_OPT_GET
option to resolve this problem.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
One use case for the new yang_data_list_find() function is to find
input parameters in RPC northbound callbacks easily, without the
need to iterate over the input parameters manually.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Parameters should be const whenever possible to improve code
readability and remove the need to cast away the constness of
const arguments.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
In these two functions, we were using VRF_DEFAULT instead of the
VRF ID passed as a parameter when checking if the given client
subscribed to receive default routes or not. This prevented the
"default-originate" command from ospfd/isisd from working correctly
under specific circumstances.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Since commit 3a11599c, the FRR YANG modules are embedded inside the
binaries and no longer need to be loaded from the file system. This
way, it's impossible for the FRR binaries and YANG modules to be out
of sync anymore. As such, update the suggestions of the northbound
error codes.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Instead of aborting when an incomplete xpath is given to the
nb_oper_data_iterate() function, just return an error so that the
callers have a chance to treat this error. Aborting based on invalid
user input is never the right thing to do.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When FRR is built without the --enable-config-rollbacks option,
the nb_db_transaction_save() function does nothing and the
"transaction_id" output parameter is left uninitialized. For
this reason, all northbound clients should initialize the
"transaction_id" argument before calling nb_candidate_commit() or
nb_candidate_commit_apply() (except when a NULL pointer is given,
which is the case of the confd and sysrepo plugins).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
We are already handling all possible four cases from the "nb_event"
enumeration, so this problem can't happen in practice. Initialize the
"ref" variable to zero to silence the warning.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Some daemons like ospfd and isisd have the ability to advertise a
default route to their peers only if one exists in the RIB. This
is what the "default-information originate" commands do when used
without the "always" parameter.
For that to work, these daemons use the ZEBRA_REDISTRIBUTE_DEFAULT_ADD
message to request default route information to zebra. The problem
is that this message didn't have an AFI parameter, so a default route
from any address-family would satisfy the requests from both daemons
(e.g. ::/0 would trigger ospfd to advertise a default route to its
peers, and 0.0.0.0/0 would trigger isisd to advertise a default route
to its IPv6 peers).
Fix this by adding an AFI parameter to the
ZEBRA_REDISTRIBUTE_DEFAULT_{ADD,DELETE} messages and making the
corresponding code changes.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
It would be nice to have the ability to access the prefix data structure
address as a block of 4 uint32_t's. This will allow me to easily/quickly
update the v6 address by 1. This will be used in subsuquent commits.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The current invocation of frr_pthread_set_name was causing it reset the os_name.
There is no need for this, we now always create the pthread appropriately
to have both name and os_name. So convert this function to a simple
call through of the pthread call now.
Before(any of these changes):
sharpd@robot ~/frr1> ps -L -p 16895
PID LWP TTY TIME CMD
16895 16895 ? 00:01:39 bgpd
16895 16896 ? 00:00:54
16895 16897 ? 00:00:07 bgpd_ka
After:
sharpd@donna ~/frr1> ps -L -p 1752
PID LWP TTY TIME CMD
1752 1752 ? 00:00:00 bgpd
1752 1753 ? 00:00:00 bgpd_io
1752 1754 ? 00:00:00 bgpd_ka
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we start a thread we always call fpt_run and since
the last commit we know os_name is filled with something,
therefore we can just set the name on startup.
This creates this output now for zebra:
sharpd@donna ~/frr2> ps -L -p 25643
PID LWP TTY TIME CMD
25643 25643 ? 00:00:00 zebra
25643 25644 ? 00:00:00 Zebra dplane
25643 25684 ? 00:00:00 zebra_apic
sharpd@donna ~/frr2>
I removed the abstraction to frr_pthread_set_name because
it was snprintf'ing into the same buffer which was the
real bug here( the first character of os_name became null).
In the next commit I'll remove that api because
it is unneeded and was a horrible hack to get
this to work for the one place it was wanted.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
On call of frr_pthread_new, save the os_name if given,
if not given use the name passed in( shortening to fit
in available space ) and finally if the name was not
passed in use the default value.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When using getrusage, we have multiple choices about what
to call for data gathering about this particular thread of execution.
RUSAGE_SELF -> This means gather all cpu run time for all pthreads associated
with this process.
RUSAGE_THREAD -> This means gather all cpu run time for this particular
pthread.
Clearly with data gathering for slow thread as well as `show thread cpu`
it would be preferable to gather only data about the current running
pthread. This probably was the original behavior of using RUSAGE_SELF
when we didn't have multiple pthreads. So it didn't matter so much.
Prior to this change, 10 iterations of 1 million routes install/remove
from zebra would give us this cpu time for the dataplane pthread:
Showing statistics for pthread Zebra dplane thread
--------------------------------------------------
CPU (user+system): Real (wall-clock):
Active Runtime(ms) Invoked Avg uSec Max uSecs Avg uSec Max uSecs Type Thread
0 280902.149 326541 860 2609982 550 2468910 E dplane_thread_loop
After this change we are seeing this:
Showing statistics for pthread Zebra dplane thread
--------------------------------------------------
CPU (user+system): Real (wall-clock):
Active Runtime(ms) Invoked Avg uSec Max uSecs Avg uSec Max uSecs Type Thread
0 58045.560 334944 173 277226 539 2502268 E dplane_thread_loop
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This is the start of a series of commits that will allow FRR to
be integrated into mlag.
Zebra and Pim will both need mlag state for the router. As such we will
need to provide a abstract about this state through the zapi.
This is the start of the common header that both Pim and Zebra will
be using.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
FreeBSD's libc segfaults when vsnprintf() is called with a null
format string. Add a null check before calling vsnprintf() to
resolve this problem.
Fixes#3537
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Unlike the other interface zapi messages, ZEBRA_INTERFACE_VRF_UPDATE
identifies interfaces using ifindexes and not interface names. This
is a problem because zebra always sends ZEBRA_INTERFACE_DOWN
and ZEBRA_INTERFACE_DELETE messages before sending
ZEBRA_INTERFACE_VRF_UPDATE, and the ZEBRA_INTERFACE_DELETE callback
from all daemons set the interface index to IFINDEX_INTERNAL. Hence,
when decoding a ZEBRA_INTERFACE_VRF_UPDATE message, the interface
lookup would always fail since the corresponding interface lost
its ifindex. Example (ospfd):
OSPF: Zebra: Interface[rt1-eth2] state change to down.
OSPF: Zebra: interface delete rt1-eth2 vrf default[0] index 8 flags 11143 metric 0 mtu 1500
OSPF: [EC 100663301] INTERFACE_VRF_UPDATE: Cannot find IF 8 in VRF 0
To fix this problem, use interface names instead of ifindexes to
indentify interfaces like the other interface zapi messages do.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
a distribute_ctx context pointer is returned after initialisation to the
calling daemon. this context pointer will be further used to do
discussion with distribute service. Today, there is no specific problem
with old api, since the pointer is the same in all the memory process.
but the pointer will be different if we have multiple instances. Right
now, this is not the case, but if that happens, that work will be used
for that.
distribute-list initialisation is split in two. the vty initialisation
is done at global level, while the context initialisation is done for
each routing daemon instance.
babel daemon is being equipped with a routing returning the main babel
instance.
also, a delete routine is available when the daemon routing instance is
suppressed.
a list of contexts is used inside distribute_list. This will permit
distribute_list utility to handle in the same daemon to handle more than
one context. This will be very useful in the vrf context.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
in order to enforce the vrf_id to return, from a vrf name, a check is
done on the vrf_name_to_id callback.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This commit is the last missing piece to complete BGP LU support in bgpd. To this moment, bgpd (and zebra) supported auto label assignment only for prefixes leaked from VRFs to vpn and for MPLS SR prefixes. This adds auto label assignment to other routes types in bgpd. The following enhancements have been made:
* bgp_route.c:bgp_process_main_one() now sets implicit-null local_label to all local, aggregate and redistributed routes.
* bgp_route.c:bgp_process_main_one() now will request a label from the label pool for any prefix that loses the label for some reason (for example, when the static label assignment config is removed)
* bgp_label.c:bgp_reg_dereg_for_label() now requests labels from label pool for routes which have no associated label index
* zebra_mpls.c:zebra_mpls_fec_register() now expects both label and label_index from the calling function, one of which must be set to MPLS_INVALID_LABEL or MPLS_INVALID_LABEL_INDEX, based on this it will decide how to register the provided FEC.
Signed-off-by: Anton Degtyarev <anton@cumulusnetworks.com>
The same issue with derived enum types that was already fixed
for yang_data_new_enum was still present here, so I simply
applied the same fix.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
Just copying th const char* of the xpath means that if we
are enqueing multiple changes from a buffer, the last xpath
addedd will overwrite all of the previous references.
Copying the xpath to a buffer simplifies the API when
retrofitting the commands.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
As suggested by Renato, add error codes that are specific
to the various phases of a northbound callback. These can
be used by the daemons when logging an error. The reasoning
is that validation errors typically mean that there is an
inconsistency in the configuration, a prepare error means
that we are running out of resources, and abort/apply errors
are bugs that need to be reported to the devs.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
I accidentally put MIT headers on these; the intent was ISC. It doesn't
really make a difference, but let's get it consistent.
Signed-off-by: David Lamparter <equinox@diac24.net>
Support an optional timeout/delay for use when a workqueue
determines that it is blocked, instead of retrying immediately.
Also, schedule as an 'event' instead of a 'timer' when using
a zero timeout value.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Reorder the numbering of the Zebra message flags and document
what each flag is supposed to do.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We never used this information and it was merely stored.
Additionally this is not something that is a flag, it's
a status.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Newer versions of clang are failing on xpath length
not being sufficiently sized to hold all possible data
that could be thrown at it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
YANG allows lists without keys for operational data, in which case
the list elements are uniquely identified using a positional index
(starting from one).
This commit does the following:
* Remove the need to implement the 'get_keys' and 'lookup_entry'
callbacks for keyless lists.
* Extend nb_oper_data_iter_list() so that it special-cases keyless
lists appropriately. Since both the CLI and the sysrepo plugin
use nb_oper_data_iterate() to fetch operational data, both these
northbound clients automatically gain the ability to understand
keyless lists without additional changes.
* Extend the confd plugin to special-case keyless lists as well. This
was a bit painful to implement given ConfD's clumsy API, but
keyless lists should work ok now.
* Update the "test_oper_data" unit test to test keyless YANG lists in
addition to regular lists.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
ConfD and Sysrepo implement configuration transactions using a
two-phase commit protocol (prepare + abort/apply). For network-wide
transactions to work, ConfD and Sysrepo move to the second phase of
the commit protocol only after receiving the results of the first
phase from all devices involved in the transaction. If all devices
succeed in the 'prepare' phase, then all of them move to the 'apply'
phase and the transaction is committed. On the other hand, if any
device fails in the 'prepare' phase, all of them move to 'abort'
phase and the transaction is aborted.
The confd and sysrepo plugins were implementing the full
two-phase commit protocol upon receiving a request to validate
the configuration changes and allocate all resources required to
apply them (first phase). The notifications to abort or apply the
changes (second phase) were being ignored since everything was being
done in the first phase for simplicity. This wasn't a problem for
single-device transactions, but it is for transactions involving
multiple devices. Rework the code a bit to do things properly and
fix this problem.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The "show" command will be available in the configuration mode and
all configuration subnodes. It's used to display the section of
the candidate configuration being edited, instead of displaying
the entire candidate configuration like when "show configuration
candidate" is used. The goal is to add more convenience when editing
huge configurations.
When the transactional CLI mode is not used, the candidate
configuration and the running configuration are identical, hence in
this case we can say that the "show" command displays the section
of the running configuration being edited.
Example:
ripd(config)# show
Configuration:
!
frr version 6.1-dev
frr defaults traditional
!
interface eth0
ip rip split-horizon poisoned-reverse
ip rip authentication mode md5
ip rip authentication string supersecret
!
interface eth1
ip rip receive version 1
ip rip send version 1
!
router rip
allow-ecmp
route 10.0.1.0/24
route 10.0.2.0/24
!
end
ripd(config)#
ripd(config)#
ripd(config)# interface eth0
ripd(config-if)# show
!
interface eth0
ip rip split-horizon poisoned-reverse
ip rip authentication mode md5
ip rip authentication string supersecret
!
ripd(config-if)# exit
ripd(config)#
ripd(config)#
ripd(config)# router rip
ripd(config-router)# show
!
router rip
allow-ecmp
route 10.0.1.0/24
route 10.0.2.0/24
!
ripd(config-router)#
The "show" command only works for daemons converted to the new
northbound model. vtysh support will be implemented at a later
time as it will require some level of coordination between vtysh
and the FRR daemons.
Fixes#3148.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Confirmed commits allow the user to request an automatic rollback to
the previous configuration if the commit operation is not confirmed
within a number of minutes. This is particularly useful when the user
is accessing the CLI through the network (e.g. using SSH) and any
configuration change might cause an unexpected loss of connectivity
between the user and the managed device (e.g. misconfiguration of a
routing protocol). By using a confirmed commit, the user can rest
assured the connectivity will be restored after the given timeout
expires, avoiding the need to access the router physically to fix
the problem.
When "commit confirmed TIMEOUT" is used, a new "commit" command is
expected to confirm the previous commit before the given timeout
expires. If "commit confirmed TIMEOUT" is used while there's already
a confirmed-commit in progress, the confirmed-commit timeout is
reset to the new value.
In the current implementation, if other users perform commits while
there's a confirmed-commit in progress, all commits are rolled back
when the confirmed-commit timeout expires. It's recommended to use
the "configure exclusive" configuration mode to prevent unexpected
outcomes when using confirmed commits.
When an user exits from the configuration mode while there's a
confirmed-commit in progress, the commit is automatically rolled
back and the user is notified about it. In the future we might
want to prompt the user if he or she really wants to exit from the
configuration mode when there's a pending confirmed commit.
Needless to say, confirmed commit only work for configuration
commands converted to the new northbound model. vtysh support will
be implemented at a later time.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Introduce frr-ripngd.yang, which defines a model for managing the
FRR ripngd daemon.
Update the 'frr_yang_module_info' array of ripngd with the new
'frr-ripngd' module.
Add two new files (ripng_cli.[ch]) which should contain all ripngd
commands converted to the new northbound model. Centralizing all
commands in a single place will facilitate the process of moving
the CLI to a separate program in the future.
Add automatically generated stub callbacks in
ripng_northbound.c. These callbacks will be implemented gradually
in the following commits.
Add the confd.frr-ripngd.yang YANG module with annotations specific
to the ConfD daemon.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This reverts commit 48944eb65e.
We're using GNU C, not ISO C - and this commit triggers new (real)
warnings about {0} instead of bogus ones about {}.
Signed-off-by: David Lamparter <equinox@diac24.net>
We sometimes store ifindex information in the NEXTHOP_TYPE_IPV[4|6]
so let's let us display that information as well when dumping
a nexthop.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There are cases where the passed parameter for a vty command is either
an interface name or an ip address. Because the interface name can be a
number, and because the user may want to use a number to define an IP (
for instance 'ping 0' is valid from shell purpose), there is a choice
that needs to be done at frr level. either from the application point of
view, the interface name will be priorized, or each number will be
considered as an ip address. In that commit, the inet_aton procedure is
replaced with the inet_pton procedure that ignores ips with just a
number.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The northbound infrastructure for operational data was subpar compared
to the infrastructure for configuration data. This commit addresses most
of the existing problems, making it possible to write operational-data
callbacks for more complex YANG models.
Summary of the changes:
* Add support for nested YANG lists.
* Add support for leaf-lists.
* Add support for leafs of type "empty".
* Introduce the "show yang operational-data XPATH" command, and write an
unit test for it. The main purpose of this command is to make it
easier to test the operational-data northbound callbacks.
* Introduce the nb_oper_data_iterate() function, that can be used
to iterate over operational data. Make the CLI and sysrepo use this
function.
* Since ConfD has a very peculiar API, it can't reuse the
nb_oper_data_iterate() like the other northbound clients. In this
case, adapt the existing ConfD callbacks to support the new features
(and make some performance improvements in the process).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Prevent the confd plugin from subscribing to configuration changes on a
data tree that contains only state data.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
A YANG list that contains both configuration and state data must have
the following callbacks: create(), delete(), get_next(), get_keys()
and lookup_entry().
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
* Rename yang_snodes_iterate() to yang_snodes_iterate_subtree() and
expose it in the public API.
* Rename yang_module_snodes_iterate() to yang_snodes_iterate_module().
* Rename yang_all_snodes_iterate() to yang_snodes_iterate_all().
* Make it possible to stop the iteration at any time by returning
YANG_ITER_STOP in the iteration callbacks.
* Make the iteration callbacks accept only one user argument and not
two.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
In some cases it will be necessary to load all FRR native modules.
Examples:
* vtysh needs to load all YANG modules so that it can manipulate data
from all daemons.
* The gen_northbound_callbacks tool will need to load all YANG modules
since augmentations from one module can have an effect in the required
northbound callbacks of other modules.
The new yang_module_load_all() function provides this functionality.
As a side note, the "frr_native_modules" will need to be updated every
time we add a new YANG module to FRR.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
For convenience, make yang_dnode_free() remove the entire data tree and
not only the data node given as a parameter.
Also, add a null-pointer check on nb_config_replace() before calling
yang_dnode_free().
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
By default the data nodes created by yang_dnode_new() could contain
only configuration data (LYD_OPT_CONFIG). Add a 'config_only' option
to yang_dnode_new() so that it can create data nodes containing both
configuration and state data.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Prefetching the schema node when creating yang_data structures is
expensive, and in most cases we don't need that information. In that case,
fetch the schema information only when necessary to improve performance
when fetching operational data.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
A while ago all FRR configuration commands were converted to use the
QOBJ infrastructure to keep track of configuration objects. This
means the configuration lock isn't necessary anymore because the
QOBJ code detects when someones tries to edit a configuration object
that was deleted and react accordingly (log an error and abort the
command). The possibility of accessing dangling pointers doesn't
exist anymore since vty->index was removed.
Summary of the changes:
* remove the configuration lock and the vty_config_lockless() function.
* rename vty_config_unlock() to vty_config_exit() since we need to
clean up a few things when exiting from the configuration mode.
* rename vty_config_lock() to vty_config_enter() to remove code
duplication that existed between the three different "configuration"
commands (terminal, private and exclusive).
Configuration commands converted to the new northbound model don't
need the configuration lock either since the northbound API also
detects when someone tries to edit a configuration object that
doesn't exist anymore.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When editing the candidate configuration, the northbound must ensure
that either all changes made by a command are accepted or none are.
This is done to prevent inconsistent states where only parts of a
command are applied in the event any error happens.
The previous API for converted commands, the nb_cli_cfg_change()
function, required callers to pass an array containing all changes
that needed to be applied in the candidate configuration. The
problem with this API is that it was very inconvenient for complex
commands, which change different configuration options depending
on several factors. This required users to manipulate the array
of configuration changes using low-level primitives, making it
complicated to implement some commands.
To solve this problem, introduce a new API based on the two following
functions:
- nb_cli_enqueue_change()
- nb_cli_apply_changes()
The first function is used to enqueue configuration changes, one
at time. Then the nb_cli_apply_changes() function is used to apply
all the enqueued configuration changes.
To implement this, a static-sized array was allocated in the "vty"
structure, along with a counter of enqueued changes. This eliminates
the need to declare an array of configuration changes in every
converted CLI command, simplifying things quite considerably.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Add the "abort_if_not_found" parameter to the yang_dnode_get_entry()
function instead of always aborting when an user pointer is not
found. This will make it possible, for example, to use this function
during the validation phase of a configuration transaction. Callers
will only need to check if the function returned NULL or not,
since new configuration objects (if any) won't be created until
the NB_EV_APPLY phase of the transaction.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
In some cases it might be desirable to obtain the schema name of
a libyang data node. Introduce the yang_dnode_get_schema_name()
function for this purpose.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This fixes an infinite loop that happened every time the connection
to the confd daemon was lost. Deactivate the confd module when
that happens to fix the infinite loop. This is only a temporary
workaround, in the long term we need to add a connection retry timer
to reestablish the connection to the confd daemon once it's back.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
the netns discovery process executed when vrf backend is netns, allows
the zebra daemon to dynamically change the default vrf name value. This
option is disabled, when the zebra is forced to a default vrf value with
option -o.
PR=61513
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
This bakes our YANG models straight into the library/daemons, so they
don't need to be loaded from /usr/share/yang. This makes the
installation quite a bit more robust, as well as gets us halfway to
running uninstalled. (The other half is baking in the extension type
module.)
The /usr/share/yang directory is still searched as a fallback, as well
as for the experimental YANG model translator. This is likely to stay
as is for the time being.
Signed-off-by: David Lamparter <equinox@diac24.net>
Display following Per MAC and Neigh's output:
If duplicate address detection is under process,
display detection start time and detection count.
If duplicate address detection detected an address
as duplicate, display detection time and duplicate
status.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Duplicate address detection configuration clis
under bgp l2vpn evpn config mode.
- Enabled/Disable (global knob) for feature.
- Configure cli for duplicate detection action
freeze and freze until time (auto-recovery).
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
if zebra is not started, then vrf identifiers are not available. This
prevents import/exportation to be available. This commit permits having
import/export available, even when zebra is not started.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This commit introduces lib/id_alloc, which has facilities for both an ID number
allocator, and less efficient ID holding pools. The pools are meant to be a
temporary holding area for ID numbers meant to be re-used, and are implemented
as a linked-list stack.
The allocator itself is much more efficient with memory. Based on sizeof
values on my 64 bit desktop, the allocator requires around 155 KiB per
million IDs tracked.
IDs are ultimately tracked in a bit-map split into many "pages." The
allocator tracks a list of pages that have free bits, and which sections
of each page have free IDs, so there isn't any scanning required to find
a free ID. (The library utility ffs, or "Find First Set," is generally a
single CPU instruction.) At the moment, totally empty pages will not be
freed, so the memory utilization of this allocator will remain at the
high water mark.
The initial intended use case is for BGP's TX Addpath IDs to be pulled
from an allocator that tracks which IDs are in use, rather than a free
running counter. The allocator reserves ID #0 as a sentinel value for
an invalid ID numbers, and BGP will want ID #1 reserved as well. To
support this, the allocator allows for IDs to be explicitly reserved,
though be aware this is only practical to use with low numbered IDs
because the allocator must allocate pages in order.
Signed-off-by Mitchell Skiba <mskiba@amazon.com>
ipv6 distribute-list name picked up was not the correct one. the
parameter number is modified accordingly.
Also, the unconfiguration of distribute-list ipv6 was conflicting with
other daemon, thus making impossible the unconfigration. The command has
been split to be specific to ipv6 distribute-list.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This duplicates itself N times since it's not wrappered in a vtysh
command. In lieu of doing that, just remove the message, it's not really
necessary.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
It's been a year since we added the new optional parameters
to instantiation. Let's switch over to the new name.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The frr-interface YANG module models interfaces using a YANG list keyed
by the interface name and the interface VRF. Interfaces can't be keyed
only by their name since interface names might not be globally unique
when the netns VRF backend is in use. When using the VRF-Lite backend,
however, interface names *must* be globally unique. In this case, we need
to validate the uniqueness of interface names inside the appropriate
northbound callback since this constraint can't be expressed in the
YANG language. We must also ensure that only inactive interfaces can be
removed, among other things we need to validate in the northbound layer.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Introduce frr-interface.yang, which defines a model for managing FRR
interfaces.
Update the 'frr_yang_module_info' array of all daemons that will
implement this module.
Add automatically generated stub callbacks in if.c. These callbacks will
be implemented in the following commit.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This plugin leverages the northbound API to integrate FRR with Sysrepo,
a YANG-based configuration and operational state data store.
The plugin is linked to the libsysrepo library and communicates with
the sysrepod daemon using GPB (Google Protocol Buffers) over AF_UNIX
sockets. The integration consists mostly of glue code that calls the
appropriate FRR northbound callbacks in response to events triggered
by the sysrepod daemon (e.g. request to change the configuration or to
fetch operational data).
To build the sysrepo plugin, provide the --enable-sysrepo option to the
configure script while building FRR (the libsysrepo library needs to be
installed in the system).
When installed, the sysrepo plugin will be available for all FRR daemons
and can be loaded using the -M (or --module) command line option.
Example: bgpd -M sysrepo.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This plugin leverages the northbound API to integrate FRR with the ConfD
management agent.
The plugin is linked to the libconfd library and communicates with the
confd daemon using local TCP sockets. The integration consists mostly
of glue code that calls the appropriate FRR northbound callbacks in
response to events triggered by the confd daemon (e.g. request to change
the configuration or to fetch operational data).
By integrating FRR with the libconfd library, FRR can be managed using
all northbound interfaces provided by ConfD, including NETCONF, RESTCONF
and their Web API.
The ConfD CDB API is used to handle configuration changes and the ConfD
Data Provider API is used to provide operational data, process RPCs and
send notifications. Support for configuration management using the ConfD
Data Provider API is not available at this point.
The ConfD optional 'get_object()' and 'get_next_object()' callbacks were
implemented for optimal performance when fetching operational data.
This plugins requires ConfD 6.5 or later since it uses the new leaf-list
API introduced in ConfD 6.5.
To install the plugin, the --enable-confd option should be given to the
configure script, specifying the location where ConfD is installed.
Example: ./configure --enable-confd=/root/confd-6.6
When installed, the confd plugin will be available for all FRR daemons
and can be loaded using the -M (or --module) command line option.
Example: zebra -M confd.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
* Cast when assigning should be to uint16_t
* Restored comment documenting strange behavior
* Further increased PREFIX_STRLEN to 80 chars
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The CMD_SUCCESS_DAEMON case should be excluded from storing the command line
that we think failed.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We weren't cleaning up some files (a whole lot of python foobar) and had
some files in the dist tarball that don't quite belong there.
Signed-off-by: David Lamparter <equinox@diac24.net>
The ->hash_cmp and linked list ->cmp functions were sometimes
being used interchangeably and this really is not a good
thing. So let's modify the hash_cmp function pointer to return
a boolean and convert everything to use the new syntax.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
libunwind provides an alternate to backtrace() for printing out the call
stack of a particular location. It doesn't use the frame pointer, it
goes by the DWARF debug info. In most cases the traces have exactly the
same information, but there are some situations where libunwind traces
are better.
(On some platforms, the libc backtrace() also uses the DWARF debug info
[e.g.: ARM backtraces are impossible without it] but this is not the
case everywhere, especially not on BSD libexecinfo.)
Signed-off-by: David Lamparter <equinox@diac24.net>
Allow the modification of whether or not we will allow
BUM flooding on the vxlan bridge. To do this allow
the upper level protocol to specify via the ZEBRA_VXLAN_FLOOD_CONTROL
zapi message.
If flooding is disabled then BUM traffic will not be forwarded
to other VTEP's.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When reading in config files and we have failures on multiple
lines actually note the actual failure lines and return them.
This fixes an issue where we stopped counting errors after
the first one and we got missleading line numbers that
did not correspond to the actual problem.
This is fixed:
sharpd@donna ~/frr> sudo /usr/lib/frr/pimd --log=stdout -A 127.0.0.1 -f /etc/frr/pimd.conf
2018/10/11 09:41:01 PIM: VRF Created: default(0)
2018/10/11 09:41:01 PIM: pim_vrf_enable: for default
2018/10/11 09:41:01 PIM: zclient_lookup_sched_now: zclient lookup immediate connection scheduled
2018/10/11 09:41:01 PIM: zclient_lookup_new: zclient lookup socket initialized
2018/10/11 09:41:01 PIM: pimd 6.1-dev starting: vty@2611
2018/10/11 09:41:01 PIM: [EC 100663304] ERROR: No such command on config line 2: inteface lo
2018/10/11 09:41:01 PIM: [EC 100663304] ERROR: No such command on config line 3: ip igmp
2018/10/11 09:41:01 PIM: [EC 100663304] ERROR: No such command on config line 4: ip igmp join 224.1.1.1 13.13.13.2
^C2018/10/11 09:45:09 PIM: Terminating on signal SIGINT
2018/10/11 09:45:09 PIM: VRF Deletion: default(0)
Fixes: #3161
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Don't allocate threads in the stack, but use the standardized
`thread_get` and `thread_add_unused` to avoid creating corner cases in
the thread API.
This fixes a thread mutex memory leak in FreeBSD.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Two important changes:
* Centralize the thread teardown procedure;
* Save and restore thread mutex context to avoid losing the memory
pointer;
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
The compiler.h header provides us with some useful macro's
that we are using in the system. We do not know exactly
where the CPP_NOTICE and CPP_WARN macros are used but
they can move around. Place this header early in the
build then.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This cleans up watchfrr to be more "normal" like the other daemons in
terms of what it does in main(), i.e. using the full frr_*() call set.
Also, this changes the startup behaviour on watchfrr to stay attached on
the daemon's parent process until startup is really complete. This
should allow removing the "watchfrr.started" hack at some point.
Signed-off-by: David Lamparter <equinox@diac24.net>
This makes libfrr.so executable to print its version info. This is
useful if you need to check your libfrr.so matches your daemons.
Signed-off-by: David Lamparter <equinox@diac24.net>
This option can be used to get statically linked binaries.
Note: libfrr.la is removed from modules' library dependency list. This
is intentional and explained in a comment in lib/subdir.am.
Signed-off-by: David Lamparter <equinox@diac24.net>
Overview:
Coverity points a copy-paste error in the Red-Black tree implementation. The
RB tree code is based on the OpenBSD implementation, so at first glance, it
is a strong point for thinking twice before touching anything.
Details:
The code is an augmented RB tree implementation [1], which adds to RB trees
the possibility of using a callback on every node update for updating per-node
associated metainformation. The bug is clear once checking other places where
the callback is called.
Impact:
- FRR: no impact, because the "augmented" capability is not being used.
- OpenBSD [2]: it seems there is no impact, at least in the 'src' repository.
Additional observations:
- If the "augmented" capability is not used, the code could run faster (at
every operation on a node the callback is checked for not being NULL). May
be branch prediction could be enough for those extra operations being
negligible on most processors in use.
[1] http://kaba.hilvi.org/pastel-1.3.0/pastel/sys/redblacktree.htm
[2] GH mirror: https://github.com/openbsd/src/blob/master/sys/kern/subr_tree.c
Signed-off-by: F. Aragon <paco@voltanet.io>
Keep track of how often route-maps are applied and
how often each clause of a route-map is applied.
This change showed that `show route-map` was outputting
odd data so fix that output and add in the applied
times too.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Wrapper the get/set of the table->info pointer so that
people are not directly accessing this data.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When entering a interface name and you fat-finger it
actually display some useful information about the vrf
we are in.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When the "call" CLI is executed from with-in a route-map that is already in use,
there is a need to get the route-map clients to re-evalute the clauses defined
by both the parent route-map, as well as the child route-map.
The existing callbacks, add_hook() and delete_hook() can be used by the lib to
inform the clients when the "call" is configured and unconfigured.
Signed-off-by: NaveenThanikachalam <nthanikachal@vmware.com>
Redundant parentheses surrounding declarator removed.
Can be detected via static analysis with e.g.
./configure CFLAGS=-Wredundant-parens CC=clang
Signed-off-by: F. Aragon <paco@voltanet.io>
OS-level yield is generally a bad and possibly dangerous idea. If the
thread should be suspended, there should always be something to wait on,
or it turns into busy waiting. And if it's "just giving something else
the chance to run" - that's the kernel's job to determine, and the
kernel will do so while considering priorities, cgroups, and whatnot.
Let it do its job.
Signed-off-by: David Lamparter <equinox@diac24.net>
All I can see is an unneccessary complication. If there's some purpose
here it needs to be documented...
Signed-off-by: David Lamparter <equinox@diac24.net>
Corrections so that the BGP daemon can work with the label manager properly
through a label-manager proxy. Details:
- Correction so the BGP daemon behind a proxy label manager gets the range
correctly (-I added to the BGP daemon, to set the daemon instance id)
- For the BGP case, added an asynchronous label manager connect command so
the labels get recycled in case of a BGP daemon reconnection. With this,
BGPd and LDPd would behave similarly.
Signed-off-by: F. Aragon <paco@voltanet.io>
Allow at timer wheel creation time the ability to specify a
name for what we want the 'show thread cpu' to show up as.
Modify pim to note this.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Allow the user to specify a run name for display in
'show thread cpu' that is different than the function
name we are calling.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
FreeBSD supports pthread_set_name_np() too. Also, pthread_set_name_np()
returns void. And NetBSD has pthread_setname_np() with an extra arg...
Signed-off-by: David Lamparter <equinox@diac24.net>
Need this to get CMSG_SPACE/CMSG_LEN on Solaris.
Also, AC_GNU_SOURCE is deprecated, AC_USE_SYSTEM_EXTENSIONS does that.
Signed-off-by: David Lamparter <equinox@diac24.net>
config.h (or, transitively, zebra.h) must be the first include file
listed for autoconf things like _GNU_SOURCE and _POSIX_C_SOURCE to work
correctly.
Signed-off-by: David Lamparter <equinox@diac24.net>
ASAN/MSAN/TSAN flags need to be in CFLAGS and LDFLAGS; the latter links
the correct compiler-dependent library. Also, the configure switch was
broken (--disable-... would enable the sanitizer.)
Signed-off-by: David Lamparter <equinox@diac24.net>
Since we're now building through one large Makefile, we can easily put
things with their daemons and crossreference nicely.
Signed-off-by: David Lamparter <equinox@diac24.net>
Clang was thinking the random level could be negative. (And, no, I
couldn't figure that out by reading its output... trial and error this
was.)
Signed-off-by: David Lamparter <equinox@diac24.net>
Add a TAILQ_POP_FIRST so Clang understands it's the same item that is
getting removed from the list.
Signed-off-by: David Lamparter <equinox@diac24.net>
Auto-detect if pthread_condattr_setclock is available and if
it is not allow the code to compile around the issue.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
