This moves all the DFLT_BGP_* stuff over to the new defaults mechanism.
bgp_timers_nondefault() added to get better file-scoping.
v2: moved everything into bgp_vty.c so that the core BGP code is
independent of the CLI-specific defaults. This should make the future
northbound conversion easier.
Signed-off-by: David Lamparter <equinox@diac24.net>
The sender side AS path loop detection code was implemented since the
import of Quagga code, however it was always disabled by a `ifdef`
guard.
Lets allow the user to decide whether or not to enable this feature on
run-time.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Add -s X or --socket_size X to the bgp cli to allow
the end user to specify the outgoing bgp tcp kernel
socket buffer size.
It is recommended that this option is only used on
large scale operations.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The newly added PEER_RMAP_TYPE_AGGREGATE flag is setup to
be the 9th bit:
But the flag we are putting it into:
uint8_t rmap_type;
is 8 bits. Adjust the size.
Found by Coverity SA Scan
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There was a silly bug introduced when the command to show failed sessions
was added. A missing "," caused the wrong error message to be printed.
Debugging this led down a path that:
- Led to discovering one more error message that needed to be added
- Providing the error code along with the string in the JSON output
to allow programs to key off numbers rather than strings.
- Fixing the missing ","
- Changing the error message to "Waiting for Peer IPv6 LLA" to
make it clear that we're waiting for the link local addr.
Signed-off-by: Dinesh G Dutt <5016467+ddutt@users.noreply.github.com>
In a data center, having 32-128 peers is not uncommon. In such a situation, to find a
peer that has failed and why is several commands. This hinders both the automatability of
failure detection and the ease/speed with which the reason can be found. To simplify this
process of catching a failure and its cause quicker, this patch does the following:
1. Created a new function, bgp_show_failed_summary to display the
failed summary output for JSON and vty
2. Created a new function to display the reset code/subcode. This is now used in the
failed summary code and in the show neighbors code
3. Added a new variable failedPeers in all the JSON outputs, including the vanilla
"show bgp summary" family. This lists the failed session count.
4. Display peer, dropped count, estd count, uptime and the reason for failure as the
output of "show bgp summary failed" family of commands
5. Added three resset codes for the case where we're waiting for NHT, waiting for peer
IPv6 addr, waiting for VRF to init.
This also counts the case where only one peer has advertised an AFI/SAFI.
The new command has the optional keyword "failed" added to the classical summary command.
The changes affect only one existing output, that of "show [ip] bgp neighbors <nbr>". As
we track the lack of NHT resolution for a peer or the lack of knowing a peer IPv6 addr,
the output of that command will show a "waiting for NHT" etc. as the last reset reason.
This patch includes update to the documentation too.
Signed-off-by: Dinesh G Dutt <5016467+ddutt@users.noreply.github.com>
Generally available hook for plugging application-specific
code in for bgp peer change events.
This hook (peer_status_changed) replaces the previous, more
specific 'peer_established' hook with a more general-purpose one.
Also, 'bgp_dump_state' is now registered under this hook.
Signed-off-by: Marton Kun-Szabo <martonk@amazon.com>
"show bgp l2vpn evpn neighbors <neighbor> [advertised-routes|routes]' did
not work due to various bugs. First, the command only accepted IPv4
addresses as valid neighbor ID, thereby rejecting unnumbered BGP and IPv6
neighbor address. Second, the SAFI was hardcoded to MPLS_VPN even though
we were passing the safi. Third, "all" made no sense in the command context
and to make the command uniform across all address families, I removed the
"all" keyword from the command.
Signed-off-by: Dinesh G Dutt <ddps4u@gmail.com>
Both of these hooks are necessary for proper operation of extensions
that need to latch on to a particular instance.
- without the delete hook, it's impossible to get rid of stale
references, leading to crashes with invalid instance pointers.
- the config-write hook is necessary because per-instance config needs
to be written inside the "router bgp" block to have the appropriate
context; adding a separate config node can't do that.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
These counters are accessible through BMP and may be useful to monitor
bgpd. A CLI to show them could also be added if people are interested.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
last_reset_cause_size is the length *used* in last_reset_cause[]. It's
straight up used wrong here; we're saving off a reset cause and need to
check against the *available* size in last_reset_cause[].
This could actually have led to (hopefully rare) crashes in the assert
there, since the assert condition might fail incorrectly.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This code is not returned anywhere in the system as that bgp
is by default multiple-instance 'only' now. So remove
the last remaining bits of it from the code base.
Remove BGP_ERR_MULTIPLE_INSTANCE_USED too.
Make bgp_get explicitly return BGP_SUCCESS
instead of 0.
Remove the multi-instance error code too.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* When the bgp is being deleted and routes are in clear workqueue
and new aggregate address being allocated
* Added flag BGP_FLAG_DELETE_IN_PROGRESS in bgp structure to
bgp instance is being deleted
* When adding aggregate route check this flag and peer_self is valid
Signed-off-by: Soman K S <somanks@vmware.com>
The BGP_OPT_CONFIG_CISCO command could no longer be set
as such remove it from the system as a viable option to
be used.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Since we no-longer allow you to select multiple-instance
or not from the cli, let's completely remove the flag
as well.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The iana_afi_t and iana_safi_t were being created in zebra.h
and zebra.h is a bit of a dumping ground. When the iana_afi2str and
iana_safi2str functions were created, it was correctly pointed out
that we should just use the internal afi_t and safi_t 2str functions
but to do that we would need to include prefix.h in zebra.h. Which
really is not the right thing to do. This tells us that we need
to break out this code into it's own header.
Move to iana_afi.h the enums and specific functions and remove
from zebra. Convert to using the afi2str and safi2str functions.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Prevent IPv6 routes received via a ibgp session with one of its own interface
ip as nexthop from getting installed in the BGP table.
Implemented IPV6 HASH table, where we need to add any ipv6 address as they
gets configured and delete them from the HASH table as the ipv6 addresses
get unconfigured. The above hash table is used to verify if any route learned
via BGP has nexthop which is equal to one of its its connected ipv6 interface.
Signed-off-by: Biswajit Sadhu sadhub@vmware.com
This makes the instance bearing the advertise-all-vni config option
register to zebra as the EVPN one, forwarding it the option.
Signed-off-by: Tuetuopay <tuetuopay@me.com>
Sponsored-by: Scaleway
Found that previous fix for this issue caused collatoral damage and
reverted that fix. This fix clears the vrf_bitmaps when the vrf is
disabled/deleted and then re-applies the redist config when the vrf
is re-enabled.
Ticket: CM-24231
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
The "show bgp ipv6 summary" output displays incorrect number of peers count.
sonic# show bgp ipv6 summary
IPv6 Unicast Summary:
BGP router identifier 10.1.0.1, local AS number 65100 vrf-id 0
BGP table version 0
RIB entries 0, using 0 bytes of memory
Peers 5, using 103 KiB of memory
Peer groups 1, using 64 bytes of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
2003::1 4 65099 0 0 0 0 0 never Active
2088::1 4 65100 0 0 0 0 0 never Active
3021::2 4 65100 0 0 0 0 0 never Active
Total number of neighbors 3
sonic#
In the above output, the peers count displays as 5 but the actual peer count is 3, i.e.. 3 neighbors are activated in ipv6 unicast address family.
Displayed peer count (5) is the number of the neighbors activated in a BGP instance.
Fix : Now the peers count displays the number of neighbors activated per afi/safi.
After Fix:
sonic# show bgp ipv6 summary
IPv6 Unicast Summary:
BGP router identifier 10.1.0.1, local AS number 65100 vrf-id 0
BGP table version 0
RIB entries 0, using 0 bytes of memory
Peers 3, using 62 KiB of memory
Peer groups 1, using 64 bytes of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
2003::1 4 65099 0 0 0 0 0 never Active
2088::1 4 65100 0 0 0 0 0 never Active
3021::2 4 65100 0 0 0 0 0 never Active
Total number of neighbors 3
sonic#
Signed-off-by: Akhilesh Samineni <akhilesh.samineni@broadcom.com>
In the case of EVPN symmetric routing, the tenant VRF is associated with
a VNI that is used for routing and commonly referred to as the L3 VNI or
VRF VNI. Corresponding to this VNI is a VLAN and its associated L3 (IP)
interface (SVI). Overlay next hops (i.e., next hops for routes in the
tenant VRF) are reachable over this interface.
https://tools.ietf.org/html/draft-ietf-bess-evpn-prefix-advertisement
section 4.4 provides additional description of the above constructs.
The implementation currently derives this L3 interface for EVPN tenant
routes using special code that looks at route flags. This patch
exchanges the L3 interface between zebra and bgpd as part of the L3-VNI
exchange in order to eliminate some this special code.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Display only ipv4 neighbors when 'show bgp ipv4 neighbors' command is issued.
Display only ipv6 neighbors when 'show bgp ipv6 neighbors' command is issued.
Take the address family of the peer address into account, while displaying the neighbors.
Signed-off-by: Akhilesh Samineni <akhilesh.samineni@broadcom.com>
that iprule list stands for the list of fs entries that are created,
based only on ip rule from/to rule.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Problem reported that with certain sequences of defining the
remote-as on the peer-group and the members, the configuration would
become wrong, with configured remote-as settings not reflected in
the config but peers unable to come up. This fix resolves these
inconsistencies.
Ticket: CM-19560
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Add a bit of code that allows us to dump the mac hash. Future
commits will actually add entries to the mac hash and then operate
on it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* The function bgp_router_id_zebra_bump() will check for active bgp
peers before chenging the router ID.
If there are established peers, router ID is not modified
which prevents the flapping of established peer connection
* Added field in bgp structure to store the count of established peers
Signed-off-by: kssoman <somanks@vmware.com>
