Setup a per-VRF identifier to use along with the Router Id to build the
RD. Define a function to encode the RD. Code is brought over from EVPN
and EVPN code has been modified to use the generic function.
Ticket: CM-20256
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
add the `import vrf XXXX` command
router bgp 4 vrf DONNA
<config>
!
router bgp 4 vrf EVA
<config>
address-family ipv4 uni
import vrf DONNA
!
!
This command will allow for vrf EVA to specify that it would like
to receive the routes from vrf DONNA into it's table.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add support for CLI "auto" keyword in vrf->vpn export label:
router bgp NNN vrf FOO
address-family ipv4 unicast
label vpn export auto
exit-address-family
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
MPLS label pool backed by allocations from the zebra label manager.
A caller requests a label (e.g., in support of an "auto" label
specification in the CLI) via lp_get(), supplying a unique ID and
a callback function. The callback function is invoked at a later
time with the unique ID and a label value to inform the requestor
of the assigned label.
Requestors may release their labels back to the pool via lp_release().
The label pool is stocked with labels allocated by the zebra label
manager. The interaction with zebra is asynchronous so that bgpd
is not blocked while awaiting a label allocation from zebra.
The label pool implementation allows for bgpd operation before (or
without) zebra, and gracefully handles loss and reconnection of
zebra. Of course, before initial connection with zebra, no labels
are assigned to requestors. If the zebra connection is lost and
regained, callbacks to requestors will invalidate old assignments
and then assign new labels.
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
Routes that have labels must be sent via a nexthop that also has labels.
This change notes whether any path in a nexthop update from zebra contains
labels. If so, then the nexthop is valid for routes that have labels.
If a nexthop update has no labeled paths, then any labeled routes
referencing the nexthop are marked not valid.
Add a route flag BGP_INFO_ANNC_NH_SELF that means "advertise myself
as nexthop when announcing" so that we can track our notion of the
nexthop without revealing it to peers.
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
This work is derived from a work done by China-Telecom.
That initial work can be found in [0].
As the gap between frr and quagga is important, a reworks has been
done in the meantime.
The initial work consists of bringing the following:
- Bringing the client side of flowspec.
- the enhancement of address-family ipv4/ipv6 flowspec
- partial data path handling at reception has been prepared
- the support for ipv4 flowspec or ipv6 flowspec in BGP open messages,
and the internals of BGP has been done.
- the memory contexts necessary for flowspec has been provisioned
In addition to this work, the following has been done:
- the complement of adaptation for FS safi in bgp code
- the code checkstyle has been reworked so as to match frr checkstyle
- the processing of IPv6 FS NLRI is prevented
- the processing of FS NLRI is stopped ( temporary)
[0] https://github.com/chinatelecom-sdn-group/quagga_flowspec/
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: jaydom <chinatelecom-sdn-group@github.com>
In BGP, doing policy-routing requires to use table identifiers.
Flowspec protocol will need to have that. 1 API from bgp zebra has been
done to get the table chunk.
Internally, onec flowspec is enabled, the BGP engine will try to
connect smoothly to the table manager. If zebra is not connected, it
will try to connect 10 seconds later. If zebra is connected, and it is
success, then a polling mechanism each 60 seconds is put in place. All
the internal mechanism has no impact on the BGP process.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This commit is relying on bgp vpn-policy. It is needed to configure
several bgp vrf instances, and in each of the bgp instance, configure
the following command under address-family ipv4 unicast node:
[no] rt redirect import RTLIST
Then, a function is provided, that will parse the BGP instances.
The incoming ecommunity will be compared with the configured rt redirect
import ecommunity list, and return the VRF first instance of the matching
route target.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Previous patches to suppress display of automatically calculated
coalesce-time did not fully work because the flag indicating whether the
value was automatically calculated was not set properly upon creation.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
PR #1739 added code to leak routes between (default VRF) VPN safi and unicast RIBs in any VRF. That set of changes included temporary CLI including vpn-policy blocks to specify RD/RT/label/&c. After considerable discussion, we arrived at a consensus CLI shown below.
The code of this PR implements the vpn-specific parts of this syntax:
router bgp <as> [vrf <FOO>]
address-family <afi> unicast
rd (vpn|evpn) export (AS:NN | IP:nn)
label (vpn|evpn) export (0..1048575)
rt (vpn|evpn) (import|export|both) RTLIST...
nexthop vpn (import|export) (A.B.C.D | X:X::X:X)
route-map (vpn|evpn|vrf NAME) (import|export) MAP
[no] import|export [vpn|evpn|evpn8]
[no] import|export vrf NAME
User documentation of the vpn-specific parts of the above syntax is in PR #1937
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
- add "debug bgp vpn label" CLI
- improved debug messages for "debug bgp bestpath"
- send vrf label to zebra after zebra informs bgpd of vrf_id
- withdraw vrf_label from zebra if zebra informs bgpd that vrf_id is disabled
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
The work_queue_free function free'd up the wq pointer but
did not set it too NULL. This of course causes situations
where we may use the work_queue after it is freed. Let's
modify the work_queue to set the pointer for you.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When VRF is not yet available at startup, the check for main socket
presence must be done. As the main socket creation is made in a separate
place from vrf socket for netns, ths main socket creation must not be
prevented when a BGP VRF relies on vrf lite mechanism.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Upon creation of BGP instances, server socket may or may not be created.
In the case of VRF instances, if the VRF backend relies on NETNS, then
a new server socket will be created for each BGP VRF instance. If the
VRF backend relies on VRF LITE, then only one server socket will be
enough. Moreover, At startup, with BGP VRF configuration, a server
socket may not be created if VRF is not the default one or VRF is not
recognized yet.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The change contained in this commit does the following:
- discovery of vrf id from zebra daemon, and adaptation of bgp contexts
with BGP.
The list of network addresses contain a reference to the bgp context
supporting the vrf.
The bgp context contains a vrf pointer that gives information about
the netns path in case the vrf is a netns path.
Only some contexts are impacted, namely socket creation, and retrieval
of local IP settings. ( this requires vrf identifier).
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
peer->ifindex was only used in two places but it was never populated so
neither of them worked as they should. 'struct peer' also has a 'struct
interface' pointer which we can use to get the ifindex.
Use the new threading facilities provided in lib/ to streamline the
threads used in bgpd. In particular, all of the lifecycle code has been
removed from the I/O thread and replaced with the default loop. Did not
do the same to the keepalives thread as it is much smaller (doesn't need
the event system).
Also cleaned up some comments to match the style guide.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Adds ability to specify that peers should be administratively shutdown
when first configured.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
When a peer configured with administrative shutdown is added to a peer
group, the administrative shutdown status is discarded and the peer will
enter the BGP FSM. This is not what we want. Preserve the flag instead.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The constant to limit # of allowed cli tokens on any one line was
defined in multiple places, all inconsistent with each other. Fix.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The BGP IO thread must be running before other threads
can start using it. So at startup check to see
that it running once, instead of before every
function call into.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The multithreading code has a comment that reads:
"XXX: Heavy abuse of stream API. This needs a ring buffer."
This patch makes the relevant code use a ring buffer.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Was using 0 as a sentinel value, so user couldn't configure 0 as the
value of the coalesce timer.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
currently, we have a rd_id bitfield
to assign an unique index for auto RD.
This bitfield currently resides under struct bgp which seems wrong.
We need to shift this to a global space
as this ID space is really global per box.
One more reason to keep it at a global data structure is,
the ID space could be used by both VNIs and VRFs.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
BGP VRF can be created/deleted either via config or via l3vni add/del.
We need to handle various sequences.
1. If user config is presented, an l3vni del should not delete the vrf instance
2. do not write bgp config in show running for auto created vrf
2. If l3vni present, disallow the cli for deleting bgp vrf instance
3. If l3vni is added and vrf config is present set the flags properly
4. if bgp vrf is configured unset the AUTO flag
Ticket: CM-18630
Review: CCR-6906
Testing: Manual
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Since coalesce time is now heuristically adjusted based on peer count,
we need to separate out specific configuration by the user from the
current value. Behavior established is to not adjust if the user has a
value set.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
If we are in OpenSent or OpenConfirm peer state and we receive a new
address-family activation, we would end up ignoring the new activation
and not tell our peer about it. You could notice this by seeing
the fact that a 'show bgp neighbor' command returns a 'Not in
any update group' for a particular family.
This modifies the code such that we now notice that we are in
either OpenSent or OpenConfirm state and reset the peer to
allow us to send them the new capability.
Ticket: CM-19021
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The subgroup coalesce timer controls how long updates to a particular
subgroup are delayed in order to allow additional peers to join the
subgroup. Presently the timer value is 200 ms. Increase it to 1 second
and adjust up as peers are configured, with an upper cap at 10s.
This cuts convergence time by a factor of 3 at large scale (300+ peers,
1000+ prefixes per peer).
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
bgpd supports setting a write-quanta that serves as a hint on how many
packets to write per I/O cycle. Now that input is buffered, it makes
sense to add the equivalent parameter for how many packets are processed
per cycle. This is *not* how many packets are read off the wire per I/O
cycle; rather it is how many packets are processed from the input buffer
in a given cycle after having been read off the wire and sanitized.
Since these values must be used from multiple threads, they have also
been made atomic.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Instead of reading a packet header and the rest of the packet in two
separate i/o cycles, instead read a chunk of data at one time and then
parse as many packets as possible out of the chunk.
Also changes bgp_packet.c to batch process packets.
To avoid thrashing on useless mutex locks, the scheduling call for
bgp_process_packet has been changed to always succeed at the cost of no
longer being cancel-able. In this case this is acceptable; following the
pattern of other event-based callbacks, an additional check in
bgp_process_packet to ignore stray events is sufficient. Before deleting
the peer all events are cleared which provides the requisite ordering.
XXX: chunk hardcoded to 5, should use something similar to wpkt_quanta
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Move and modify all network input related code to bgp_io.c
* Add a real input buffer to `struct peer`
* Move connection initialization to its own thread.c task instead of
piggybacking off of bgp_read()
* Tons of little fixups
Primary changes are in bgp_packet.[ch], bgp_io.[ch], bgp_fsm.[ch].
Changes made elsewhere are almost exclusively refactoring peer->ibuf to
peer->curr since peer->ibuf is now the true FIFO packet input buffer
while peer->curr represents the packet currently being processed by the
main pthread.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
After implement threading, bgp_packet.c was serving the double purpose
of consolidating packet parsing functionality and handling actual I/O
operations. This is somewhat messy and difficult to understand. I've
thus moved all code and data structures for handling threaded packet
writes to bgp_io.[ch].
Although bgp_io.[ch] only handles writes at the moment to keep the noise
on this commit series down, for organization purposes, it's probably
best to move bgp_read() and its trappings into here as well and
restructure that code so that read()'s happen in the pthread and packet
processing happens on the main thread.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Changes all synchronization primitives to be dynamically allocated. This
should help catch any subtle errors in pthread lifecycles.
This change also pre-initializes synchronization primitives before
threads begin to run, eliminating a potential race condition that
probably would have caused a segfault on startup on a very fast box.
Also changes mutex and condition variable allocations to use
MTYPE_PTHREAD and updates tests to do the proper initializations.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Removes the WiP shim and implements proper thread lifecycle management.
* Declare necessary pthread_t's in bgp_master
* Define new MTYPE in lib/thread.c for pthreads
* Allocate and free BGP's pthreads appropriately
* Terminate and join threads appropriately
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Problem reported that we weren't adjusting the keepalive timer
correctly when we negotiated a lower hold time learned from a
peer. While working on this, found we didn't do inheritance
correctly at all. This fix solves the first problem and also
ensures that the timers are configured correctly based on this
priority order - peer defined > peer-group defined > global config.
This fix also displays the timers as "configured" regardless of
which of the three locations above is used.
Ticket: CM-18408
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: CCR-6807
Testing-performed: Manual testing successful, fix tested by
submitter, bgp-smoke completed successfully
This improves code readability and also future-proofs our codebase
against new changes in the data structure used to store interfaces.
The FOR_ALL_INTERFACES_ADDRESSES macro was also moved to lib/ but
for now only babeld is using it.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is an important optimization for users running FRR on systems with
a large number of interfaces (e.g. thousands of tunnels). Red-black
trees scale much better than sorted linked-lists and also store the
elements in an ordered way (contrary to hash tables).
This is a big patch but the interesting bits are all in lib/if.[ch].
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
list_free is occassionally being used to delete the
list and accidently not deleting all the nodes.
We keep running across this usage pattern. Let's
remove the temptation and only allow list_delete
to handle list deletion.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Convert the list_delete(struct list *) function to use
struct list **. This is to allow the list pointer to be nulled.
I keep running into uses of this list_delete function where we
forget to set the returned pointer to NULL and attempt to use
it and then experience a crash, usually after the developer
has long since left the building.
Let's make the api explicit in it setting the list pointer
to null.
Cynical Prediction: This code will expose a attempt
to use the NULL'ed list pointer in some obscure bit
of code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If we are configuring a peer in multiple address families
and assigning the peer group valid configuration. If you
delay the non-automatically address family activation you
will not copy the peer group data into that peer.
Suppose we enter this:
router bgp 65001
bgp router-id 6.0.0.17
neighbor ISL peer-group
neighbor ISL advertisement-interval 0
neighbor ISL timers connect 5
neighbor ISL timers 3 10
address-family ipv4 unicast
neighbor ISL allowas-in 1
neighbor swp31s0 interface
neighbor swp31s0 peer-group ISL
address-family ipv6 unicast
neighbor ISL allowas-in 1
We've assigned allowas-in to the ISL peer group. Now suppose
we have a peer start connection to swp31s0. We startup and
auto copy the v4 peer group information onto the peer. We
do not copy the v6 peer group information because it has
not started yet.
Now at a later time if we enter:
address-family ipv6 unicast
neighbor ISL activate
We start the swp31s0 peer in v6, but we are not copying the
peer group data into the v6 swp31s0 peer data structure. As
such we are not respecting the v6 peer group config.
This Change modifies and renames the non_peergroup_activate_af
function to peer_activate_af. We also call the function
peer_group2peer_config_copy_af if the peer is part of a peer
group.
The static function peer_group2peer_config_copy_af I have moved
to higher up so we don't have to add a static function declaration
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This fixes the broken indentation of several foreach loops throughout
the code.
From clang's documentation[1]:
ForEachMacros: A vector of macros that should be interpreted as foreach
loops instead of as function calls.
[1] http://clang.llvm.org/docs/ClangFormatStyleOptions.html
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
1) Add hash names to all hash_create calls
2) Fix community_hash, ecommunity_hash and lcommunity_hash key
creation
3) Fix output of community and lcommunity iterators( why would
we want to see the memory location of the backet? ).
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
afi_header_vty_out() is easily replaced with vty_frame(), which means we
can drop a whole batch of "int *write" args as well as the entirety of
bgp_config_write_family_header().
=> AFI/SAFI config writing is now a lot simpler.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
1. Change hostname_get to cmd_hostname_get
2. Change domainname_get to cmd_domainname_get
3. New API to set domainname
3. Provide a CLI command to set domainname
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Bug introduced by commit 37d361e7. Removing the call to bgp_close()
from bgp_delete() was a mistake.
Reported-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When the underlying VRF is deleted, ensure that state for the
next hops that BGP registers with zebra for tracking purposes is
properly updated. Otherwise BGP will not re-register the next hop
when the VRF is re-created, resulting in the next hop staying
unresolved.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Ticket: CM-17456
Reviewed By: CCR-6587
Testing Done: Manual, bgp-min, vrf
There are two parts to this commit:
1. create a database of self tunnel-ip for used in martian nexthop check
In a CLAG setup, the tunnel-ip (VNI UP) notification comes before the clag-anycast-ip comes up in the system.
This was causing our self next hop check to fail and we were instaling routes with martian nexthop in zebra.
We need to keep this info in a seperate database for all local tunnel-ip.
This database will be used in parallel with the self next hop database to martian nexthop checks.
2. When a local VNI comes up, update the tunnel-ip database and filter routes in the RD table if necessary
In case of EVPN we might receive routes from clag peer before the clag-anycast ip and VNI is up on the system.
We will store the routes in the RD table for later processing.
When VNI comes UP, we loop thorugh all the routes and install them in zebra if required.
However, we were missing the martian nexthop check in this code path.
From now onwards, when a VNI comes UP,
we will first update the tunnel-ip database
We then loop through all the routes in RD table and apply martian next hop filter if required.
Things not covered in this commit but are required:
This processing is needed in general when an address becomes a connected address.
We need to loop through all the routes in BGP and apply martian nexthop filter if necessary.
This will be taken care in a seperate bug
Ticket:CM-17271/CM-16911
Reviewed By: ccr-6542
Testing Done: Manual
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
When displaying the config, bgpd only checked for the existance of a peer-group prefix-list before
deciding to not display the outbound prefix-list. This commit updates the outbound prefix-list
logic to match the inbound.
afi_header_vty_out is sidestepping the vty code, writing straight to the
output (either stdout or the obuf), which results in newline translation
not being performed.
Easiest fix is replacing it with a macro. Longer-term, I have some old
code to add "prefaces" to the vty output, planning to dig that up.
Fixes: #949 ("bgpd show running doesn't show new lines")
Reported-by: Lou Berger <lberger@labn.net>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The defines:
ONE_DAY_SECOND
ONE_WEEK_SECOND
ONE_YEAR_SECOND
were being defined all over the system, move the
define to a central location.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
SAFI values have been a major source of confusion over the last few
years. That's because each SAFI needs to be represented in two different
ways:
* IANA's value used to send/receive packets over the network;
* Internal value used for array indexing.
In the second case, defining reserved values makes no sense because we
don't want to index SAFIs that simply don't exist. The sole purpose of
the internal SAFI values is to remove the gaps we have among the IANA
values, which would represent wasted memory in C arrays. With that said,
remove these reserved SAFIs to avoid further confusion in the future.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
swpX peers all start out with the same sockunion so initially they all
go into the same hash bucket. Once IPv6 ND has worked its magic they
will have different sockunions and will go in different buckets...life
is good.
Until then though, we are in a phase where all swpX peers have the same
socknunion. Once we have HASH_THRESHOLD (10) swpX peers and call
hash_get for a new swpX peer the hash code calls hash_expand(). This
happens because there are more than HASH_THRESHOLD entries in a single
bucket so the logic is "expand the hash to spread things out"...in our
case expanding doesn't spread out the swpX peers because all of their
sockunions are the same.
I looked at having peer_hash_make and peer_hash_same consider the ifname
of the swpX peer but that is a large change that we don't want to make
at the moment. So the fix is to put a cap on how large we are
willing to let the hash table get. By default there is no limit but if
max_size is set we will not allow the hash to expand above that.
This reverts commit c14777c6bf.
clang 5 is not widely available enough for people to indent with. This
is particularly problematic when rebasing/adjusting branches.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
This allows frr-reload.py (or anything else that scripts via vtysh)
to know if the vtysh command worked or hit an error.
When the BGP router-id changes, EVPN routes need to be processed due
to potential change to their RD.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Implement configuration options for EVPN. The configuration options include
VNI configuration with RD and Import and Export Route Targets. Also, display
the EVPN configuration.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Define the EVPN (EVI) hash table and related structures and initialize
and cleanup.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
json-c does not (yet) offer support for unsigned integer types, and
furthermore, the docs state that all integers are stored internally as
64-bit. So there's never a case in which we would want to limit,
implicitly or otherwise, the range of an integer when adding it to a
json object.
Among other things this fixes the display of ASN values greater than
(1/2) * (2^32 - 1)
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
- All ipv4 labeled-unicast routes are now installed in the ipv4 unicast
table. This allows us to do things like take routes from an ipv4
unicast peer, allocate a label for them and TX them to a ipv4
labeled-unicast peer. We can do the opposite where we take routes from
a labeled-unicast peer, remove the label and advertise them to an ipv4
unicast peer.
- Multipath over a labeled route and non-labeled route is not allowed.
- You cannot activate a peer for both 'ipv4 unicast' and 'ipv4
labeled-unicast'
- The 'tag' variable was overloaded for zebra's route tag feature as
well as the mpls label. I added a 'mpls_label_t mpls' variable to
avoid this. This is much cleaner but resulted in touching a lot of
code.
* Ranges for some MED were 2^32 - 2 instead of 2^32 - 1
* Use correct printf specifiers for unsigned values
* Some drive-by CLI collapsing and simplification
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
We would only diplay one "no neighbor 2.2.2.2 send-community XYZ" but
there might be multiple that need to be displayed.
Add checks related to AFI_L2VPN/SAFI_EVPN that were missing in some parts
of the code. Fix incorrect check skipping EVPN when sending End of RIB.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
For certain (sub) address families such as EVPN or L3VPN, the routing
table is organized as a 2-level tree. Ensure that code walking the
routing table does the correct handling in such cases.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Basically if we are reading in a cli with a extended-nexthop
and we have not received from zebra the interface we are working
on I believe we have a race condition where we are not
propagating the PEER_FLAG_CAPABILITY_ENHE in this case.
Modify the code to propagate even if we haven't found the
interface yet.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Basically if we are reading in a cli with a extended-nexthop
and we have not received from zebra the interface we are working
on I believe we have a race condition where we are not
propagating the PEER_FLAG_CAPABILITY_ENHE in this case.
Modify the code to propagate even if we haven't found the
interface yet.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
vrf_iflist_create -> By the time this is called in enable, the vrf's iflist
is already created. Additionally this code should be a properly of the vrf
to init/destroy not someone else.
vrf_iflist_terminate -> This function should be a property of vrf deletion
and does not need to be exposed.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The way thread.c is written, a caller who wishes to be able to cancel a
thread or avoid scheduling it twice must keep a reference to the thread.
Typically this is done with a long lived pointer whose value is checked
for null in order to know if the thread is currently scheduled. The
check-and-schedule idiom is so common that several wrapper macros in
thread.h existed solely to provide it.
This patch removes those macros and adds a new parameter to all
thread_add_* functions which is a pointer to the struct thread * to
store the result of a scheduling call. If the value passed is non-null,
the thread will only be scheduled if the value is null. This helps with
consistency.
A Coccinelle spatch has been used to transform code of the form:
if (t == NULL)
t = thread_add_* (...)
to the form
thread_add_* (..., &t)
The THREAD_ON macros have also been transformed to the underlying
thread.c calls.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Implement support for negotiating IPv4 or IPv6 labeled-unicast address
family, exchanging prefixes and installing them in the routing table, as
well as interactions with Zebra for FEC registration. This is the
implementation of RFC 3107.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Implement support for activating the labeled-unicast address family in
BGP and relevant configuration for this address family.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
This means there are no ties into the SNMP code anymore other than the
init call at startup.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Start centralising startup & option parsing into the library.
FRR_DAEMON_INFO is a bit weird, but it will become useful later (e.g.
for killing the ZLOG_* enum, and having the daemon name available)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
When starting up bgp and zebra now, you can specify
-e <number> or --ecmp <number>
and that number will be used as the maximum ecmp
that can be used.
The <number specified must be >= 1 and <= MULTIPATH_NUM
that Quagga is compiled with.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When configuring l2vpn evpn address-family, the show running indicates
that the address-family l2vpn evpn address-family has been configured,
and not evpn, as it was done before this commit. This is a bug fix.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This patch introduces show show bgp evpn commands to dump
NLRI entries configured or received on BGP, related to EVPN
New command introduced is the following:
show [ip] bgp l2vpn evpn [all | rd <rd name> ] [overlay]
Like for MPLS, similar set of commands is added for EVPN:
show [ip] bgp l2vpn evpn [all|rd <RDNAME>]
show [ip] bgp l2vpn evpn all neighbor <NEIGHBOR> routes
show [ip] bgp l2vpn evpn all neighbor <NEIGHBOR> advertised-routes
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This patch introduces code to receive a NLRI message with route type
5, as defined in draft-ietf-bess-evpn-prefix-advertisement-02. It
It increases the number of parameters to extract from the NLRI and
to store into bgp extra information structure. Those parameters are
the ESI (ethernet segment identifier), the gateway IP Address (which
acts like nexthop attribute but is contained inside the NLRI itself)
and the ethernet tag identifier ( that acts for the VXLan Identifier)
This patch updates bgp_update() and bgp_withdraw() api, and then does the
necessary adapations for rfapi.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
To handle BGP NLRI EVPN messages, bgp is modified to handle AFI_L2VPN
and SAFI_EVPN values.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
BGP Large Communities are a novel way to signal information between
networks. An example of a Large Community is: "2914:65400:38016". Large
BGP Communities are composed of three 4-byte integers, separated by a
colon. This is easy to remember and accommodates advanced routing
policies in relation to 4-Byte ASNs.
This feature was developed by:
Keyur Patel <keyur@arrcus.com> (Arrcus, Inc.),
Job Snijders <job@ntt.net> (NTT Communications),
David Lamparter <equinox@opensourcerouting.org>
and Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Job Snijders <job@ntt.net>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Introduce internal and IANA defintions for AFI/SAFI and mapping
functions and modify code to use these. This refactoring will
facilitate adding support for other AFI/SAFI whose IANA values
won't be suitable for internal data structure definitions (e.g.,
they are not contiguous).
The commit adds some fixes related to afi/safi testing with 'make check
' command.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Ticket: CM-11416
Reviewed By: CCR-3594 (mpls branch)
Testing Done: Not tested now, tested earlier on mpls branch
Preserve forwarding state bit can be set in OPEN message with the use of
new vty commands
bgp graceful-restart preserve-fw-state
no bgp graceful-restart preserve-fw-state
This must be set before activating the connection to a peer, since it is
for forging graceful restart capability of OPEN messages.
Signed-off-by: Julien Courtat <julien.courtat@6wind.com>
This patch enable the support of graceful restart for routes sets with
vpnv4 address family format. In this specific case, data model is
slightly different and some additional processing must be done when
accessing bgp tables and nodes.
The clearing stale algorithm takes into account the specificity where
the 2 node level for MPLS has to be reached.
Signed-off-by: Julien Courtat <julien.courtat@6wind.com>
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
bgp_master_init is called first thing in main(), so we need to wedge a
qobj_init() call in there... this needs some improvement...
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This contains bgp memory leak fixes as well as cleanups to VRF/namespace
handling and has been run through extended testing in Cumulus' testbed:
Tested-by: Donald Sharp <sharpd@cumulusnetworks.com>
