Our topotests send SIGBUS 2 seconds after a SIGTERM is
initiated. This is bad because under a heavily loaded
topotest system we may have a case where the system has
not had a chance to properly shut down the daemon.
Extend the time greatly before topotests send SIGBUS.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This removes a giant `switch { }` block from lib/zclient.c and
harmonizes all zclient callback function types to be the same (some had
a subset of the args, some had a void return, now they all have
ZAPI_CALLBACK_ARGS and int return.)
Apart from getting rid of the giant switch, this is a minor security
benefit since the function pointers are now in a `const` array, so they
can't be overwritten by e.g. heap overflows for code execution anymore.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
*_anywhere(item) returns whether an item is on _any_ container. Only
available for unsorted containers for now.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This provides a "is this item on this list" check, which may or may not
be faster than using *_find() for the same purpose. (If the container
has no faster way of doing it, it falls back to using *_find().)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Even if it doesn't matter for an unit test in general, it hides actual
leaks in the code being tested. Fix so any leaks will be actual bugs.
(Currently there aren't any, yay.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This script is failing occassionally in our upstream topotests.
Where it was changing route-maps and attempting to see if
summarization was working correctly. The problem was that
the code appeared to be attempting to add route-maps to
redistribution in ospf then modifying the route-maps behavior
to affect summarization as well as the metric type of that
summarization.
The problem is of course that ospf does not appear to modify
the summary routes metric-type when the components
of that summary change it's metric-type. So the test
is testing nothing. In addition the test had messed
up the usage of the route-map generation code and all
the generated config was in different sequence numbers
but route-map processing would never get to those
new sequence numbers because of how route-maps are processed.
Let's just remove this part of the test instead of trying
to unwind it into anything meaningfull
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Several tests used the route_map_create functionality
with `metric-type` but never bothered to add the
backend code to ensure it works correctly.
Add it in so it can be used.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
We have this pattern in this test:
# Let's kill the interface on rt2 and see what happens with the RIB and BFD on rt1
tgen.gears["rt2"].link_enable("eth-rt1", enabled=False)
# By default BFD provides a recovery time of 900ms plus jitter, so let's wait
# initial 2 seconds to let the CI not suffer.
topotest.sleep(2, 'Wait for BFD down notification')
router_compare_json_output(
"rt1", "show ip route ospf json", "step3/show_ip_route_rt2_down.ref", 1, 0
)
Under a heavy CI load, interface down events and then reacting to them may not actually
happen within 2 seconds. Allow some more grace time in the test to ensure that we
react to it in an appropriate manner.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
OSPF when it is deciding on whom it should elect for DR and backup
has a process that prioritizes network stabilty over the exact
same results of who is the DR / Backups.
Essentially if we have r1 ----- r2
Let's say r1 has a higher priority, but r2 comes up first, starts
sending hello packets and then decides that it is the DR. At some
point in time in the future, r1 comes up and then connects to r2
at that point it sees that r2 has elected itself DR and it keeps
it that way.
This is by design of the system. With our tight ospf timers as
well as high load being experienced on our test systems. There
exists a bunch of ospf tests that we cannot guarantee that a
consistent DR will be elected for the test. As such let's not
even pretend that we care a bunch and just look for `Full`.
If we care about `ordering` we need to spend more time getting
the tests to actually start routers, ensure that htey are up and
running in the right order so that priority can take place.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Fix a loop in the setup phase of isis_topo1_vrf: only configure
interfaces that each router actually has.
Signed-off-by: Mark Stapp <mstapp@nvidia.com>
Ensure GR helpers have received a Grace-LSA before killing the
ospfd/ospf6d process that is undergoing a graceful restart.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
There's no more difference between number-named and word-named access-lists.
This commit removes separate arguments for number-named ACLs from CLI.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
BGP LU will use implicit-null in more situations now; adjust
the original LU topotest to align with that. Node R2 uses
imp-null now, while R1 continues to allocate labels.
Signed-off-by: Mark Stapp <mstapp@nvidia.com>
Add a second BGP labelled-unicast (BGP-LU) test suite, with
an additional router and some additional tests.
Signed-off-by: Mark Stapp <mstapp@nvidia.com>
2 things:
a) Each test was setting up for graceful restart with calls to
`graceful-restart prepare ip[v6] ospf`, then sleeping for
3 or 5 seconds. Then killing the ospf process. Under heavy
load there is no guarantee that zebra has received/processed
this signal. Write some code to ensure that this happens
b) Tests are issuing commands in this order:
1) issue gr prepare command
2) kill router
3) <ensure routes were still installed in zebra>
4) start router
5) <ensure routes were stil installed in zebra>
Imagine that the system is under some load and there is
a small amount of time before step 5 happens. In this
case ospf could have come up and started neighbor relations
and also started installing routes. If zebra receives
a new route before step 5 is issued then the route could
be in a state where it is not installed, because it is
being sent to the kernel for installation. This would
fail the test because it would only look 1 time. This
is fixed by giving time on restart for the routes to
be in the installed state.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Any command that uses `peer_lookup_in_view` crashes when "vrf all" is
used, because bgp is NULL in this case.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
FRR should only ever use the appropriate THREAD_ON/THREAD_OFF
semantics. This is espacially true for the functions we
end up calling the thread for.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Remove references to the deprecated "CLI()" function; clean up
a couple of string escapes; make one test-case sensitive to
previous failures.
Signed-off-by: Mark Stapp <mstapp@nvidia.com>
Some tests had commented-out references to the old "CLI()"
function. Remove those so they're not confusing in the future,
and replace at least one with a comment that uses the
'mininet_cli()' function.
Signed-off-by: Mark Stapp <mstapp@nvidia.com>
* Add new debug directives for NSSA LSAs;
* Remove the "debug ospf6 gr helper" command since it doesn't make
sense for this test (not to mention it was renamed to "debug ospf6
graceful-restart");
* Migrate to the new interface-level command to enable OSPFv3 on
interfaces ("interface WORD area A.B.C.D" was deprecated).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Document the `sleep` statement so people know that we are sleeping
because we are waiting for the BFD down notification. If we don't
sleep here it is possible that we get outdated `show` command results.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Call the `show` commands less often to reduce the CPU pressure.
Also increase the wait time from 60 to 80 seconds to have spare room
for failures (4 times more). This is the latest measure wait time:
> INFO: topolog: 'router_json_cmp' succeeded after 20.08 seconds
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Reduce timers so we send hello packets more often and reduce dead
interval to converge faster.
Previous test wait amount:
> INFO: topolog: 'router_json_cmp' succeeded after 47.20 seconds
New test wait amount:
> INFO: topolog: 'router_json_cmp' succeeded after 20.08 seconds
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
FRR should only ever use the appropriate THREAD_ON/THREAD_OFF
semantics. This is espacially true for the functions we
end up calling the thread for.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Add the "default-information-originate" option to the "area X nssa"
command. That option allows the origination of Type-7 default routes
on NSSA ABRs and ASBRs.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The route created by the "default-information-originate" command
isn't a regular external route. As such, an NSSA ABR shouldn't
originate a corresponding Type-7 LSA for it (there's a separate
configuration knob to generate Type-7 default routes).
While here, fix a small issue in ospf6_asbr_redistribute_add()
where routes created by "default-information-originate" were being
displayed with an incorrect "unknown" type.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Fix wrong comparison since route->path.metric_type is always set
to either 1 or 2. The OSPF6_PATH_TYPE_EXTERNAL2 constant, whose
value is 4, refers to a route type so its usage was incorrect here.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Considering that both the GR helper mode and restarting mode can be
enabled at the same time, the "graceful-restart helper-only" command
can be a bit misleading since it implies that only the helper mode
is enabled. Rename the command to "graceful-restart helper enable"
to clarify what the command does.
Start a deprecation cycle of one year before removing the original
command
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Because vrf backend may be based on namespaces, each vrf can
use in the [16-(2^32-1)] range table identifier for daemons that
request it. Extend the table manager to be hosted by vrf.
That possibility is disabled in the case the vrf backend is vrflite.
In that case, all vrf context use the same table manager instance.
Add a configuration command to be able to configure the wished
range of tables to use. This is a solution that permits to give
chunks to bgp daemon when it works with bgp flowspec entries and
wants to use specific iptables that do not override vrf tables.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Considering that both the GR helper mode and restarting mode can be
enabled at the same time, the "graceful-restart helper-only" command
can be a bit misleading since it implies that only the helper mode
is enabled. Rename the command to "graceful-restart helper enable"
to clarify what the command does.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Issue #9535 describes how the export-list/import-list commands work
differently on ospfd and ospf6d.
In short:
* On ospfd, "area A.B.C.D export-list" filters which internal
routes an ABR exports to other areas. On ospf6d, instead, that
command filters which inter-area routes an ABR exports to the
configured area (which is quite counter-intuitive). In other words,
both commands do the same but in opposite directions.
* On ospfd, "area A.B.C.D import-list" filters which inter-area
routes an ABR imports into the configured area. On ospf6d, that
command filters which inter-area routes an interior router accepts.
* On both daemons, "area A.B.C.D filter-list prefix NAME <in|out>"
works exactly the same as import/export lists, but using prefix-lists
instead of ACLs.
The inconsistency on how those commands work is undesirable. This
PR proposes to adapt the ospf6d commands to behave like they do
in ospfd.
These changes are obviously backward incompatible and this PR doesn't
propose any mitigation strategy other than warning users about the
changes in the next release notes. Since these ospf6d commands are
undocumented and work in such a peculiar way, it's unlikely many
users will be affected (if any at all).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
A bunch of tests have this pattern:
a) Install a new prefix into bgp
b) Run this loop:
foreach (router in topology) {
verify_bgp_rib(router)
}
This is to ensure that the prefix is actually disseminated.
The problem with this, of course, is that a wait of 2 seconds
for every item in that loop makes no sense. As that the initial
router verification of it's bgp rib will wait 2 seconds and
all the remaining bgp routers in the topology will have gotten
the data. So we end up waiting a bunch of extra time.
Remove the initial_wait time for verify_bgp_rib. Also
increase the failure wait time to 30 seconds. This is
to give a bigger window for bgp to send it's data for
our test systems that could be under heavy load. In the
normal case tests will never hit this.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add a new topotest that features a topology with seven routers spread
across four OSPF areas:
* 1 backbone area;
* 1 regular non-backbone area (0.0.0.1);
* 1 stub area (0.0.0.2);
* 1 NSSA area (0.0.0.3).
All routers have both GR and GR helper functionality enabled in
the configuration. The test consists of restarting each router,
one at time, and checking that all forwarding planes (and LSDBs)
are kept intact during those restarts.
A successful run takes about three minutes to finish.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Compilation is warning that a memcpy is only copying
the first (sizeof pointer) into memory. This is not
what we really want. Although it does beg the question about
why this memcpy is needed( or what it is doing ). I'm going
to just fix the memcpy and call it a day.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
frrmod_load() attempts to dlopen() several possible paths
(constructed from its basename argument) until one succeeds.
Each dlopen() attempt may fail for a different reason, and
the important one might not be the last one. Example:
dlopen(a/foo): file not found
dlopen(b/foo): symbol "bar" missing
dlopen(c/foo): file not found
Previous code reported only the most recent error. Now frrmod_load()
describes each dlopen() failure.
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
1. Optimized test: test_clear_pim_neighbors_and_mroute_p0 run time by clearing
mroute and verifying mroutes separately. Execution time is reduced from almots 10 mins
to ~220 sec.
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
route_scale run is 500+ seconds. Break it up into
2 separate tests. This should reduce run time a slight
bit.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Fix issue of topotest failures with BGP status Connect or Idle
instead of the expected Active
Signed-off-by: Martin Winter <mwinter@opensourcerouting.org>
Modernize the test a bit, generate expected results rather than load from
file, and add a general json_cmp with retry function and use it.
Signed-off-by: Christian Hopps <chopps@labn.net>
- Update the template and documentation to use newer pytest fixutres for
setup and teardown, as well as skipping tests when the suite fails.
Signed-off-by: Christian Hopps <chopps@labn.net>
When looking for a implied host route it is not necessary
to add the `/32` to an ip route add. As such masks
will not be set in this case. Set the value of masks
to a known good value so that when the route installation
fails the test for it actually being there will tell you
that the route is not there -vs- complaining about mask
being uninited.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
There is no need to add calls to addKernelRoutes for
groups. They do not need to be routed via the
normal kernel methodology.
Tests run successfully with this change.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
- Fix xterm support to work, previously it mostly didn't, not it should
in all cases (i.e., single or dist mode).
- Catch when the user tries to use various window requiring topotests
features (e.g., --cli-on-error) but isn't running under supported
system (e.g., byobu/tmux/xterm), and fail the run with an explanation.
Signed-off-by: Christian Hopps <chopps@labn.net>
If the SRv6 locator is deleted in zebra, zclient(bgpd)
which allocates SIDs from the locator will update the
RIBs which use those SIDs and make them invalid.
This will cause the VPNv6 route to be withdrawn and
the VPN to stop.
If the SRv6 locator is added again, zclient(bgpd) will
allocate the SIDs from the locator again, and VPNv6
will be re-established.
This commit add a test case to confirm this.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
Before this PR, in case of get locator chunk zapi from
zclient, zebra precreated a down state locator and set
the chunk ownership. After this PR, this is no longer
done, and chunks are no longer automatically generated.
In this commit, we will make a test update to check the
corresponding detailed behavior.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
Description:
Change is intended for fixing the following issues related to vrf route leaking:
Routes with special nexthops i.e. blackhole/sink routes when imported,
are not programmed into the FIB and corresponding nexthop is set as 'inactive',
nexthop interface as 'unknown'.
While importing/leaking routes between VRFs, in case of special nexthop(ipv4/ipv6)
once bgp announces route(s) to zebra, nexthop type is incorrectly set as
NEXTHOP_TYPE_IPV6_IFINDEX/NEXTHOP_TYPE_IFINDEX
i.e. directly connected even though we are not able to resolve through an interface.
This leads to nexthop_active_check marking nexthop !NEXTHOP_FLAG_ACTIVE.
Unable to find the active nexthop(s), route is not programmed into the FIB.
Whenever BGP leaks routes, set the correct nexthop type, so that route gets resolved
and correctly programmed into the FIB, in the imported vrf.
Co-authored-by: Kantesh Mundaragi <kmundaragi@vmware.com>
Signed-off-by: Iqra Siddiqui <imujeebsiddi@vmware.com>
Create a pid file for the router created by topotest.
By executing nsenter directly against this pid, developers
can execute commands directly from outside the unet shell.
This allows the developer to use script, tab completion, etc.,
and improves efficiency.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
