Before:
```
$ vtysh -c 'show bgp l2vpn evpn route detail json'
<<<<<<<<<<<<<<<<<<<< empty line
<<<<<<<<<<<<<<<<<<<< empty line
<<<<<<<<<<<<<<<<<<<< empty line
<<<<<<<<<<<<<<<<<<<< empty line
{
...
"numPrefix":4,
"numPaths":4 <<<<< four paths = four empty lines
}
```
Contain as much "empty lines" before the JSON string as the number
of paths displayed.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Let's convert to our actual library call instead
of using yet another abstraction that makes it fun
for people to switch daemons.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
BGP SoO is a tag that is appended on BGP updates to allow a peer to mark
a particular peer as belonging to a particular site. In certain MPLS L3 VPN
configurations, the BGP AS-Path may not provide the granularity needed
prevent a loop in the control-plane. With this in mind, BGP SoO is designed
to fill this gap and prevent a routing loop that may occur.
If we configure for example, `neighbor soo 65000:1` at PEs, routes won't be
announced between CPEs if soo matches. This is especially needed when using
as-override or allowas-in.
Also, this is the automated way of the same behavior as configuring route-maps
for each peer like:
```
bgp extcommunity-list cpe permit soo 65000:1
!
route-map cpe permit 10
set extcommunity soo 65000:1
...
route-map cpe deny 10
match extcommunity cpe
route-map cpe permit 20
...
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Before:
```
donatas-laptop# show bgp ipv4 unicast community-list testas
% testas is not a valid community-list name
donatas-laptop# con
donatas-laptop(config)# bgp community-list standard testas permit internet
donatas-laptop(config)# do show bgp ipv4 unicast community-list testas
donatas-laptop(config)#
```
`is not a valid community-list name` is a misleading warning message.
Doing the same for filter-list, access-list, prefix-list, route-map.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
If we have conditional advertisement enabled, and conditionally withdrew
some prefixes, and then we do a 'clear bgp', those routes were getting
advertised again, and then withdrawn the next time the conditional
advertisement scanner executed.
When we go to advertise check the prefix against the conditional
advertisement status so we don't do that.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
RFC 4760 states we SHOULD ignore the NEXT_HOP attribute for BGP Update
messages carrying only MP_REACH_NLRI attributes. Thus we should use the
Network Address of Next Hop field of the MP_REACH_NLRI as the nexthop.
Instead of always looking for BGP_ATTR_NEXT_HOP, this commit ensures:
1) we set mp_nexthop_len to BGP_ATTR_NHLEN_IPV4 for v4 bgp_static routes
2) we check mp_nexthop_len when choosing the nexthop to use for nht
3) we check mp_nexthop_len when choosing the nexthop to send to zebra
4) we check mp_nexthop_len when picking the nexthop to shown by vtysh
Reported-by: Binon Gorbutt <binon@aervivo.com>
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
The same as with prefix-list/route-maps/etc.
```
donatas-pc# show ip access-list spine
ZEBRA:
Zebra IP access list spine
seq 5 permit 200.200.200.200/32
BGP:
Zebra IP access list spine
seq 5 permit 200.200.200.200/32
PIM:
Zebra IP access list spine
seq 5 permit 200.200.200.200/32
BABELD:
Zebra IP access list spine
seq 5 permit 200.200.200.200/32
donatas-pc# show bgp ipv4 unicast access-list
ACCESSLIST_NAME Access-list name
spine
donatas-pc# show bgp ipv4 unicast access-list spine
BGP table version is 9, local router ID is 172.17.0.3, vrf id 0
Default local pref 100, local AS 1
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
Network Next Hop Metric LocPrf Weight Path
*> 200.200.200.200/32
enp3s0 0 0 65000 3456 ?
Displayed 1 routes and 10 total paths
donatas-pc#
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Just convert all uses of thread_cancel to THREAD_OFF. Additionally
use THREAD_ARG instead of t->arg to get the arguement. Individual
files should never be accessing thread private data like this.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Let's just use THREAD_OFF consistently in the code base
instead of each daemon having a special macro that needs to
be looked at and remembered what it does.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
A new command is available under SAFI_MPLS_VPN:
With this command, the BGP vpnvx prefixes received are
not kept, if there are no VRF interested in importing
those vpn entries.
A soft refresh is performed if there is a change of
configuration: retain cmd, vrf import settings, or
route-map change.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
RFC 9234 mandates that role rules apply only to IPv4/IPv6 unicast bgp
sessions. If the OTC attribute appears in other sessions, it will remain
untouched.
Signed-off-by: Eugene Bogomazov <eb@qrator.net>
RFC9234 is a way to establish correct connection roles (Customer/
Provider, Peer or with RS) between bgp speakers. This patch:
- Add a new configuration/terminal option to set the appropriate local
role;
- Add a mechanism for checking used roles, implemented by exchanging
the corresponding capabilities in OPEN messages;
- Add strict mode to force other party to use this feature;
- Add basic support for a new transitive optional bgp attribute - OTC
(Only to Customer);
- Add logic for default setting OTC attribute and filtering routes with
this attribute by the edge speakers, if the appropriate conditions are
met;
- Add two test stands to check role negotiation and route filtering
during role usage.
Signed-off-by: Eugene Bogomazov <eb@qrator.net>
When using json output for `show bgp statistics json` gather the
number of prefixes of each prefix Length.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
Start using mpls_lse_encode/mpls_lse_decode, that is endian-aware, because
we always use host-byte order, should use network-byte.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
in bgp_nlri_parse_ip there is a `sanity` check to ensure
that the prefix length as specified by the packet
will fit inside of a `struct prefix` correctly. The problem
here of course is that this is only v4 / v6 unicast/multicast
parsing and the bytes will never be more than 16, but we are copying
into a part of the struct prefix that is only 16 bytes, but with
this check the length may be up to 47 bytes( but not really possible ).
Limit the size check to at most 16 bytes (since we are only handling
v4 or v6 addresses here )
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The maxpaths same_clusterlen value was a uint16_t
with a single bit being used. No other values are
being stored. Let's remove the bitfield and simplify
to a bool.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The logic to unlock dest if iteration completed without iterating the
entire node was flawed. Specifically, if iteration terminated due to
`gr_deferred == 0` then the node would not get unlocked.
This change takes into account the fact that dest will be NULL only in
the case when the entire table was iterated and all nodes were already
unlocked. In any other case, it needs to be unlocked.
Signed-off-by: Carl Baldwin <carl@ecbaldwin.net>
