- Do not allow tab-completion on anything except words
- Rewrite cmd_make_strvec to use strsep
- Remove a few trailing whitespaces
- Remove cmd_complete_command_lib
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* command.h: (struct cmd_node) Add a hash, so duplicate installs of
a cmd_element to a command node can be detected. To help catch
strays from the VIEW/ENABLE node consolidation particularly
(installs to VIEW automatically install to ENABLE too now).
* command.c: (cmd_hash_{key,cmp}) helpers for the hash - just directly
on the pointer value is sufficient to catch the main problem.
(install_node) setup the hash for the command node.
(install_element) check for duplicate installs.
The assert on the cmd_parse_format seems misplaced.
(install_default_basic) separate the basic, VIEW, node default commands
to here.
(cmd_init) get rid of dupes, given consolidation.
(cmd_terminate) clean up the node command hash.
Not done: The (struct cmd_node)'s vector could be replaced with the
cmd hash, however much of the command parser depends heavily on the
vector and it's a lot of work to change. A vector_lookup_value could
also work, particularly if vector could be backed by a hash.
The duplicate check could be disabled in releases - but useful in
development. It's a little extra overhead at startup. The command
initialisation overhead is already something that bites in
micro-benchmarks - makes it easy for other implementations to show
how much faster they are with benchmarks where other load is low
enough that startup time is a factor.
This is a followup to commits 735e62 and 0b1442, where we forgot to apply
the same VIEW/ENABLE consolidation logic to vtysh. Also, we can't call
install_default() for the ENABLE node because some of the vty commands
installed by this function were already installed in the VIEW node before.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
If a command is put into the VIEW_NODE, it is going into the
ENABLE_NODE as well. This is especially true for show commands.
As such if a command is in both consolidate it down to VIEW_NODE.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If you are in VIEW_NODE, the command should exist in ENABLE_NODE
as well. This is being done to reduce chances of code being
added to one but not the other NODE.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The RESTRICTED_NODE command is not used, introduces code
complexity and provides no additional levels of security.
The only way to get into RESTRICTED_NODE is to add, under
vty configuration the command 'anonymous restricted', and
then telnet to a daemon, provide a password, then type
'enable' and fail to enter the password three times.
Then the user can enter a very limited set of commands to
monitor bgp and only bgp behavior.
This commit removes both the RESTRICTED_NODE usage as well
as the lib/* usage of the code
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Since not all duplicate commands can be caught during graph
construction, do a linear search over all commands before
installing.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This adds 64-bit random identifiers as "safe pointers" which are also
type-tracked / can have type-specific extension methods.
This will be used by both the CLI (to keep safe references while in
config editing mode) as well as the Cap'n Proto code (to hand out
pointers to the user in a safe way and add per-type handlers)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
When a command is complete and <cr> appears in tab- or
?-completions, make sure it appears first
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This feature adds an L3 & L2 VPN application that makes use of the VPN
and Encap SAFIs. This code is currently used to support IETF NVO3 style
operation. In NVO3 terminology it provides the Network Virtualization
Authority (NVA) and the ability to import/export IP prefixes and MAC
addresses from Network Virtualization Edges (NVEs). The code supports
per-NVE tables.
The NVE-NVA protocol used to communicate routing and Ethernet / Layer 2
(L2) forwarding information between NVAs and NVEs is referred to as the
Remote Forwarder Protocol (RFP). OpenFlow is an example RFP. For
general background on NVO3 and RFP concepts see [1]. For information on
Openflow see [2].
RFPs are integrated with BGP via the RF API contained in the new "rfapi"
BGP sub-directory. Currently, only a simple example RFP is included in
Quagga. Developers may use this example as a starting point to integrate
Quagga with an RFP of their choosing, e.g., OpenFlow. The RFAPI code
also supports the ability import/export of routing information between
VNC and customer edge routers (CEs) operating within a virtual
network. Import/export may take place between BGP views or to the
default zebera VRF.
BGP, with IP VPNs and Tunnel Encapsulation, is used to distribute VPN
information between NVAs. BGP based IP VPN support is defined in
RFC4364, BGP/MPLS IP Virtual Private Networks (VPNs), and RFC4659,
BGP-MPLS IP Virtual Private Network (VPN) Extension for IPv6 VPN . Use
of both the Encapsulation Subsequent Address Family Identifier (SAFI)
and the Tunnel Encapsulation Attribute, RFC5512, The BGP Encapsulation
Subsequent Address Family Identifier (SAFI) and the BGP Tunnel
Encapsulation Attribute, are supported. MAC address distribution does
not follow any standard BGB encoding, although it was inspired by the
early IETF EVPN concepts.
The feature is conditionally compiled and disabled by default.
Use the --enable-bgp-vnc configure option to enable.
The majority of this code was authored by G. Paul Ziemba
<paulz@labn.net>.
[1] http://tools.ietf.org/html/draft-ietf-nvo3-nve-nva-cp-req
[2] https://www.opennetworking.org/sdn-resources/technical-library
Now includes changes needed to merge with cmaster-next.
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Sam Tannous <stannous@cumulusnetworks.com>
Ticket:
N.B.: some of these are de-facto ALIAS resurrections
that are necessary due to some parser limitations; these
are marked with ALIAS_FIXME so I can go back and add
capability to the parser to handle these special cases.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Shotgun commit:
* Remove shim sources from Makefile.am
* Move new types to command.c / command.h
* Rewrite command.c / command.h
* Refactor shim types to real types in matcher
and parser
* Initial refactor pass on vty.c
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This is a rather large mechanical commit that splits up the memory types
defined in lib/memtypes.c and distributes them into *_memory.[ch] files
in the individual daemons.
The zebra change is slightly annoying because there is no nice place to
put the #include "zebra_memory.h" statement.
bgpd, ospf6d, isisd and some tests were reusing MTYPEs defined in the
library for its own use. This is bad practice and would break when the
memtype are made static.
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
[CF: rebased for cmaster-next]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
We realize VRFs with linux netns by default. The main job is
to associate a VRF with a netns. Currently this is done by
the configuration:
[no] vrf N netns <netns-name>
This command is also available in vtysh and goes to only
zebra, because presently only zebra supports multiple VRF.
A file descriptor is added to "struct vrf". This is for the
associated netns file. Once the command "vrf N netns NAME"
is executed, the specified file is opened and the file
descriptor is stored in the VRF N. In this way the
association is formed.
In vrf_socket(), we first switch to the specified VRF by
using the stored file descriptor, and then can allocate
a socket which is working in the associated netns.
Signed-off-by: Feng Lu <lu.feng@6wind.com>
Reviewed-by: Alain Ritoux <alain.ritoux@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
(cherry picked from commit 55cfa2f190620f7c711944637659bc208970324d)
NOTE: I am squashing several commits together because they
do not independently compile and we need this ability to
do any type of sane testing on the patches. Since this
series builds together I am doing this. -DBS
This new structure is the basis to get new link parameters for
Traffic Engineering from Zebra/interface layer to OSPFD and ISISD
for the support of Traffic Engineering
* lib/if.[c,h]: link parameters struture and get/set functions
* lib/command.[c,h]: creation of a new link-node
* lib/zclient.[c,h]: modification to the ZBUS message to convey the
link parameters structure
* lib/zebra.h: New ZBUS message
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Add support for IEEE 754 format
* lib/stream.[c,h]: Add stream_get{f,d} and stream_put{f,d}) demux and muxers to
safely convert between big-endian IEEE-754 single and double binary
format, as used in IETF RFCs, and C99. Implementation depends on host
using __STDC_IEC_559__, which should be everything we care about. Should
correctly error out otherwise.
* lib/network.[c,h]: Add ntohf and htonf converter
* lib/memtypes.c: Add new memeory type for Traffic Engineering support
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Add link parameters support to Zebra
* zebra/interface.c:
- Add new link-params CLI commands
- Add new functions to set/get link parameters for interface
* zebra/redistribute.[c,h]: Add new function to propagate link parameters
to routing daemon (essentially OSPFD and ISISD) for Traffic Engineering.
* zebra/redistribute_null.c: Add new function
zebra_interface_parameters_update()
* zebra/zserv.[c,h]: Add new functions to send link parameters
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Add support of new link-params CLI to vtysh
In vtysh_config.c/vtysh_config_parse_line(), it is not possible to continue
to use the ordered version for adding line i.e. config_add_line_uniq() to print
Interface CLI commands as it completely break the new LINK_PARAMS_NODE.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Update Traffic Engineering support for OSPFD
These patches update original code to RFC3630 (OSPF-TE) and add support of
RFC5392 (Inter-AS v2) & RFC7471 (TE metric extensions) and partial support
of RFC6827 (ASON - GMPLS).
* ospfd/ospf_dump.[c,h]: Add new dump functions for Traffic Engineering
* ospfd/ospf_opaque.[c,h]: Add new TLV code points for RFC5392
* ospfd/ospf_packet.c: Update checking of OSPF_OPTION
* ospfd/ospf_vty.[c,h]: Update ospf_str2area_id
* ospfd/ospf_zebra.c: Add new function ospf_interface_link_params() to get
Link Parameters information from the interface to populate Traffic Engineering
metrics
* ospfd/ospfd.[c,h]: Update OSPF_OPTION flags (T -> MT and new DN)
* ospfd/ospf_te.[c,h]: Major modifications to update the code to new
link parameters structure and new RFCs
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
tmp
