Instead of CMD_WARNING, use CMD_WARNING_CONFIG_FAILED
for any mis-configuration scenario.
Testing Done:
TOR(config)# router bgp 5548
TOR(config-router)# address-family l2vpn evpn
TOR(config-router-af)# no advertise-pip
This command is supported under L3VNI BGP EVPN VRF
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
when a pip is disabled or mac-vlan is not present
use anycast MAC as RMAC value.
Ticket:CM-26923
Reviewed By:CCR-9417
Testing Done:
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Macvlan down event have sentinel check of its parent
link presence.
Ticket:CM-26622
Reviewed By:CCR-9326
Testing Done:
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
For self type-2 routes, do not assign system-rmac
as attribute RMAC value if advertise-pip is disable
or macvlan is not present.
Ticket:CM-26923
Reviewed By:CCR-9397
Testing Done:
pip is disabled under bgp vrf2 instance.
Trigger frr-restart.
Before fix:
*> [2]:[0]:[48]:[00:02:00:00:00:2e]:[32]:[45.0.4.4]
36.0.0.11 32768 i
ET:8 RT:5546:1004 RT:5546:4002 Rmac:00:02:00:00:00:2e
After fix:
*> [2]:[0]:[48]:[00:02:00:00:00:2e]:[32]:[45.0.4.4]
36.0.0.11 32768 i
ET:8 RT:5546:1004 RT:5546:4002 Rmac:44:38:39:ff:ff:01
TOR# ifquery vlan1004
auto vlan1004
iface vlan1004
address 45.0.4.4/24
vlan-id 1004
vrf vrf2
VNI: 4002 (known to the kernel)
Type: L3
Tenant VRF: vrf2
RD: 45.0.6.4:3
Originator IP: 36.0.0.11
Advertise-pip: Yes
System-IP: 27.0.0.11
System-MAC: 00:02:00:00:00:2e
Router-MAC: 44:38:39:ff:ff:01
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
"show vrf vni" and "show evpn vni <l3vni>" commands
need to display correct router mac value.
"show evpn vni <l3vni>" detail l3vni needs to display
system mac as in PIP scenario value can be different.
Syste MAC would be derived from SVI interface MAC wherelse
Router MAC would be derived from macvlan interface MAC value.
Ticket:CM-26710
Reviewed By:CCR-9334
Testing Done:
TORC11# show evpn vni 4001
VNI: 4001
Type: L3
Tenant VRF: vrf1
Local Vtep Ip: 36.0.0.11
Vxlan-Intf: vx-4001
SVI-If: vlan4001
State: Up
VNI Filter: none
System MAC: 00:02:00:00:00:2e
Router MAC: 44:38:39:ff:ff:01
L2 VNIs: 1000
TORC11# show vrf vni
VRF VNI VxLAN IF L3-SVI State Rmac
vrf1 4001 vx-4001 vlan4001 Up 44:38:39:ff:ff:01
TORC11# show evpn vni 4001 json
{
"vni":4001,
"type":"L3",
"localVtepIp":"36.0.0.11",
"vxlanIntf":"vx-4001",
"sviIntf":"vlan4001",
"state":"Up",
"vrf":"vrf1",
"sysMac":"00:02:00:00:00:2e",
"routerMac":"44:38:39:ff:ff:01",
"vniFilter":"none",
"l2Vnis":[
1000,
]
}
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
macvlan interface up/down event triggers
bgp to send updates for evpn routes
with changed RMAC and nexthop IP values.
Ticket:CM-26190
Reviewed By:
Testing Done:
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
By default announct Self Type-2 routes with
system IP as nexthop and system MAC as
nexthop.
An API to check type-2 is self route via
checking ipv4/ipv6 address from connected interfaces list.
An API to extract RMAC and nexthop for type-2
routes based on advertise-svi-ip knob is enabled.
When advertise-pip is enabled/disabled, trigger type-2
route update. For self type-2 routes to use
anycast or individual (rmac, nexthop) addresses.
Ticket:CM-26190
Reviewed By:
Testing Done:
Enable 'advertise-svi-ip' knob in bgp default instance.
the vrf instance svi ip is advertised with nexthop
as default instance router-id and RMAC as system MAC.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
In L3VNI add callback parse, vrr rmac value.
For non-zero vrr mac value, use it as anycast RMAC
and svi mac as individual rmac value.
If advertise-pip is disable or vrr rmac is not present
use svi mac as anycast rmac value for all routes.
Ticket:CM-26190
Reviewed By:
Testing Done:
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Extract mac-vlan interface mac when a l3vni add is sent to bgp
Per L3VNI maintain vrr interface.
An api to extract vrr mac address from a vlan id, associated
master svi device.
When a l3vni operational up event is sent to bgpd,
extract vrr rmac along with svi rmac.
Ticket:CM-26190
Reviewed By:
Testing Done:
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Evpn Primary IP advertisement feature uses
individual system IP and system MAC for prefix (type-5)
and self type-2 routes.
The PIP knob is enabled by default for bgp vrf instance.
Configuration CLI for enable/disable PIP feature knob.
User can configure PIP system IP and MAC to retain as
permanent values.
For the PIP IP, the default behavior is to accept bgp default
instance's router-id. When the default instance router-id change,
reflect PIP IP assignment.
Reflect type-5 to use system-IP and system MAC as nexthop and RMAC
values.
Ticket:CM-26190
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
This function was excessively complicated. Simplify and
make everyone use the same access macro.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Spaces were not being accounted for in the heap buffer sizing, leading
to a heap buffer overflow when encoding large communities to their
string representations.
This patch also uses safer functions to do the encoding instead of
pointer math.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Tons of insane just-so pointer math here where it is not needed. This is
too smart. Use safer methods.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Zebra MLAG is using "t_read" for multiple tasks, such as
1. For opening Communication channel with MLAG
2. In case conncetion fails, same event is used for retries
3. after the connection establishment, same event is used to
read the data from MLAG
since all these taks will never schedule together, this will not
cause any issues.
Signed-off-by: Satheesh Kumar K <sathk@cumulusnetworks.com>
The half and reuse variables can never be 1 but the
SA systems we have do not know this and think it is possible.
Provide the kick in the snarples that the SA needs to know
this is not true.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
edge-2> show evpn vni detail json
{
"vni":79031,
"type":"L3",
...,
...
} <<<<<< no comma
{
"vni":79021,
"type":"L3",
...,
...
} <<<<<< no comma
{
} <<<<<< blank
edge-2>
The fix is to pack json info into json_array before printing it.
Signed-off-by: Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
Copy paste leads to invalid read of 1 byte off the heap when converting
extended community attributes into strings.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
We test nbr->oi in a couple of places for null, but
in the majority of places of the nbr->oi data is being
used we just access it. Touch up code to trust this
assertion and make the code more consistent in others.
Found in Coverity.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Bug: While preparing the JSON output, 2 loops are traversed: the outer loop
loops through RD, and the inner loop loops through the prefixes of that RD.
We hit the bug (printing blank RD and stale or null prefix info) when the inner
loop exits with nothing to print, (without allocating json_routes) and the outer
loop still tries to attach it to the parent, json_adv. Thus, we have
key=<BLANK RD>, value=<junk or prev json_routes>
The fix: Avoid attaching json_routes to the parent json if there
is nothing to print.
Signed-off-by: Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
`set vrf NAME` allows the pbr map to point to an arbitrary vrf table.
`set vrf unchanged` will use the interface's vrf for table lookup.
Further, add functionality for pbr to respond to interface events
such as interface vrf changes & interface creation/deletion.
Ex)
ubuntu_nh# show pbr map
pbr-map TEST valid: 1
Seq: 1 rule: 300 Installed: 3(1) Reason: Valid
SRC Match: 3.3.3.3/32
VRF Unchanged (use interface vrf)
pbr-map TEST2 valid: 1
Seq: 2 rule: 301 Installed: 3(2) Reason: Valid
SRC Match: 4.4.4.4/32
VRF Lookup: vrf-red
root@ubuntu_nh:/home# ip rule show
0: from all lookup local
300: from 3.3.3.3 iif dummy2 lookup main
300: from 3.3.3.3 iif dummyVRF lookup 1111
301: from 4.4.4.4 iif dummy1 lookup 1111
301: from 4.4.4.4 iif dummy3 lookup 1111
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com-
Apparently the multipath_num functionatlity has been broken
for a while because we were ignoring the recusive nexthops
when marking them inactive based on it.
This sets them as inactive as well if the parent breaks it.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
We were re-counting the entire group's active number on
every iteration of this nexthop_active_update() loop.
This is not great from a performance perspective but also
it was failing to properly mark things according to the
specified multipath_num.
Since a nexthop is set as active before this check, if its == to
the set ecmp, it gets marked inactive even though if its
under the max ecmp wanted!
ex)
set ecmp to 1.
`/usr/lib/frr/zebra -e 1`
All kernel routes will be marked inactive even with just one nexthop!
K 1.1.1.1/32 [0/0] is directly connected, dummy1 inactive, 00:00:10
K 1.1.1.2/32 [0/0] is directly connected, dummy2 inactive, 00:00:10
K 1.1.1.3/32 [0/0] is directly connected, dummy3 inactive, 00:00:10
K 1.1.1.4/32 [0/0] is directly connected, dummy4 inactive, 00:00:10
K 1.1.1.5/32 [0/0] is directly connected, dummy5 inactive, 00:00:10
K 1.1.1.6/32 [0/0] is directly connected, dummy6 inactive, 00:00:10
K 1.1.1.7/32 [0/0] is directly connected, dummy7 inactive, 00:00:10
K 1.1.1.8/32 [0/0] is directly connected, dummy8 inactive, 00:00:10
K 1.1.1.9/32 [0/0] is directly connected, dummy9 inactive, 00:00:10
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Clean up the relationships between zebra's rib and nexthop-group
headers as prep for adding a nexthop-group pointer to the
route_entry.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
On BSD systems null routes were not being installed into the
kernel. This is because commit 08ea27d112
introduced a bug where we were attempting to use the wrong
prefix afi types and as such we were going down the v6 code path.
test27.lab.netdef.org# show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR, f - OpenFabric,
> - selected route, * - FIB route, q - queued route, r - rejected route
K>* 0.0.0.0/0 [0/0] via 192.168.122.1, 00:00:23
S>* 4.5.6.8/32 [1/0] unreachable (blackhole), 00:00:11
C>* 192.168.122.0/24 [0/1] is directly connected, vtnet0, 00:00:23
test27.lab.netdef.org# exit
[ci@test27 ~/frr]$ netstat -rn
Routing tables
Internet:
Destination Gateway Flags Netif Expire
default 192.168.122.1 UGS vtnet0
4.5.6.8/32 127.0.0.1 UG1B lo0
127.0.0.1 link#2 UH lo0
192.168.122.0/24 link#1 U vtnet0
192.168.122.108 link#1 UHS lo0
Fixes: #4843
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
According to RFC 8277 IPv4 LU NLRI can be withdrawn using label 0x000000.
This RFC updates RFC3101 where it should be done only with 0x800000 label value.
Juniper implementation sets value 0x000000 when prefix is being withdrawn.
Page 12 RFC8277 states:
[RFC3107] also made it possible to withdraw a binding without
specifying the label explicitly, by setting the Compatibility field
to 0x800000. However, some implementations set it to 0x000000. In
order to ensure backwards compatibility, it is RECOMMENDED by this
document that the Compatibility field be set to 0x800000, but it is
REQUIRED that it be ignored upon reception.
Now FRR drops BGP session when receives such BGP update.
Signed-off-by: Aleksandr Klimenko <v00lk@bk.ru>
A variety of buffer overflow reads and crashes
that could occur if you fed bad info into pim.
1) When type is setup incorrectly we were printing the first 8 bytes
of the pim_parse_addr_source, but the min encoding length is
4 bytes. As such we will read beyond end of buffer.
2) The RP(pim, grp) macro can return a NULL value
Do not automatically assume that we can deref
the data.
3) BSM parsing was not properly sanitizing data input from wire
and we could enter into situations where we would read beyond
the end of the buffer. Prevent this from happening, we are
probably left in a bad way.
4) The received bit length cannot be greater than 32 bits,
refuse to allow it to happen.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The code for when a new vrf is created to properly handle
router advertisement for it is messed up in several ways:
1) Generation of the zrouter data structure should set the rtadv
socket to -1 so that we don't accidently close someone elses
open file descriptor
2) When you created a new zvrf instance *after* bootup we are XCALLOC'ing
the data structure so the zvrf->fd was 0. The shutdown code was looking
for the >= 0 to know if the fd existed (since fd 0 is valid!)
This sequence of events would cause zebra to consume 100% of the
cpu:
Run zebra by itself ( no other programs )
ip link add vrf1 type vrf table 1003
ip link del vrf vrf1
vtysh -c "configure" -c "no interface vrf1"
This commit fixes this issue.
Fixes: #5376
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* IPv6 routes received via a ibgp session with one of its own interface as
nexthop are getting installed in the BGP table.
*A common table to be implemented should take cares of both
ipv4 and ipv6 connected addresses.
Signed-off-by: Biswajit Sadhu sadhub@vmware.com
Inherited OIL is used as a part of the JoinDesired macro. And in FRR we
use the channel OIL as the inherited OIL (to reduce processing overhead
everytime JD needs to be re-evaluated). On a FHR pimreg is a part of the
channel-OIL but must not be used for JD computation.
This commit blacklists pimreg from the inherited_oil i.e. present but
ignored.
Note: This fixup is being done to address topotest failures.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
