Since nexthops are always going to need to be address family
specific unless they are only a group, we have to address
this when we receive and send them.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
The message for an invalid address family on a nexthop gateway did
not specify that is what for the gateway specifically.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add an interface pointer for an nexthop group hash entry
when we are getting a rib_add for a new route.
Also, add the interface index to the `show nexthop-group` command.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
When we get a new nexthop and find the interface associated
with it, add this nexthop to the interface's zebra interface
info nexthop hash entry list.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Make our route entry struct's re->ng nexthop group pointer
just point to the nhe->nhg nexthop hash entry nexthop group.
This will allow updates to the nexthop itself to propogate
to our routes immediately.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add a parameter to the rib_add function so that it takes
a nexthop ID from the kernel if one is passed along
with the route.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Move the nexthop unicast parsing into its own function
to improve code readability. It was getting a bit too
indented.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add parsing code for nexthop object ID's when we get a
route. When we get a new route with the new kernel, it
will come with a nexthop ID and the nexthop full info.
We should just reference by ID if it exists and point
to the nexthop hash entry that matches it.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Added functionality so that when we receive a RTM_DELNEXTHOP
for a nhg_hash_entry that is still being referenced by
a route, we immediately push it back to the kernel.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
We were ignoring the status result interger from
the netlink request and message parsing and just
returning 0. Fixed this to return the result of the last one.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Device only nexthops still need an address family associated
with them. Decided to get this from the destination prefix on it.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
We needed a kernel debugging function for netlink nexthop
messages when people are debugging kernel zebra messages.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add all the neccessary code to allow nexthops to be processed
in separate dataplane contexts with the netlink dataplane kernel
provider.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Added the appropriate flags that need to be set when
we receive a nexthop from the kernel. They should be
marked as ACTIVE and that they are in the FIB.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add the functionality to parse new nexthop group messages
from the kernel and insert them into the appropriate hash
tables. Parsing is done at startup between interface and
interface address lookup. Add functionality to parse
changes to nexthops we already have. Add functionality
to parse delete nexthop messages from the kernel and
remove them from our table.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
In the route_entry we are keeping a non pointer based
nexthop group, switch the code to use a pointer for all
operations here and ensure we create and delete the memory.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Update neighbor entries and rule entries to have the RTPROT_ZEBRA
protocol value. So we can tell where things come from.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Some netlink-facing code used for evpn/vxlan programming was
being run in the dataplane pthread, but accessing zebra core
datastructs. Move some additional data into the dataplane
context, and use it in the netlink path instead.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Move neighbor programming to the dataplane; remove
old apis; remove some ifdef'd use of direct netlink
code points, using neutral values outside of the netlink-
specific files.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
When resolving a nexthop, append its labels to the one its
resolving to along with the labels that may already be present there.
Before we were ignoring labels if the resolving level was greater than
two.
Before:
```
S> 2.2.2.2/32 [1/0] via 7.7.7.7 (recursive), label 2222, 00:00:07
* via 7.7.7.7, dummy1 onlink, label 1111, 00:00:07
S> 3.3.3.3/32 [1/0] via 2.2.2.2 (recursive), label 3333, 00:00:04
* via 7.7.7.7, dummy1 onlink, label 1111, 00:00:04
K>* 7.7.7.7/32 [0/0] is directly connected, dummy1, label 1111, 00:00:17
C>* 192.168.122.0/24 is directly connected, ens3, 00:00:17
K>* 192.168.122.1/32 [0/100] is directly connected, ens3, 00:00:17
ubuntu_nh#
```
This patch:
```
S> 2.2.2.2/32 [1/0] via 7.7.7.7 (recursive), label 2222, 00:00:04
* via 7.7.7.7, dummy1 onlink, label 1111/2222, 00:00:04
S> 3.3.3.3/32 [1/0] via 2.2.2.2 (recursive), label 3333, 00:00:02
* via 7.7.7.7, dummy1 onlink, label 1111/2222/3333, 00:00:02
K>* 7.7.7.7/32 [0/0] is directly connected, dummy1, label 1111, 00:00:11
C>* 192.168.122.0/24 is directly connected, ens3, 00:00:11
K>* 192.168.122.1/32 [0/100] is directly connected, ens3, 00:00:11
ubuntu_nh#
```
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
When a new system route comes in and we have a pre-existing
non-system route we are not deleting the current system
route from the linux kernel.
Modify the code such that when a route replace is sent
to the kernel with a new route as a system route and
the old route as a non-system route do a delete of
the old route so it is no longer in the kernel.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add a conditional to guard against segfaulting on the debug
statement when zvrf lookup fails.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
When installing a table route into the kernel choose
RTPROT_ZEBRA as the installing/controlling protocol.
This way we can know we installed it as well as stop
the warnings about this special case of `ip import-table XX`
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The failed neighbor event logging that was recently added in
commit: 3acae086ba
cast a bit too broad of a stroke. We should only inform
the user that we were ignoring the RTM_NEWNEIGH FAIL callback
when we believe it was one of our own 5549 entries.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add a bit of extra code to indicate to the operator why
we intentionally rejected a kernel route from being used.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If we get a neighbor entry for 5549 failure notice
from the kernel that means that something has probably
gone terribly wrong. Let's notice and not reinstall.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The re->uptime usage of time(NULL) leaves it open to
timing changes from outside influence. Switching
to monotime allows us to ensure that we have a timestamp
that is always increasing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We have several route types KERNEL and CONNECT that are handled via special
case in the code. This was causing a lot of work keeping the two different
classes of route types as special(SYSTEM OR NOT). Put the dplane
in charge of the code that sets the bits for signalling route install/failure.
This greatly simplifies the code calling path and makes all route types
be handled exactly the same. Additionaly code that we want to run
post data plane install can just work as per normal then, instead
of having to know we need to run it when we have a special type
of route.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com.
When we get a neighbor entry in zebra we start processing it.
Let's add some additional debugs to the processing so that when
it bails out and we don't use the data, we know the reason.
This should help in debugging the problems from why bgp does
not appear to have data associated with a neighbor entry
in the kernel.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The check for an entry being NUD_PERMANENT has already been done
there is no need to do it twice.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Use const in the accessors for pseudowire nhlfe data; pull
that through the kernel-facing apis that use that data.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
When we install a new route into the kernel always use
REPLACE. Else if the route is already there it can
be translated into an append with the flags we are
using.
This is especially true for the way we handle pbr
routes as that we are re-installing the same route
entry from pbr at the moment.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Read the onlink flag from the kernel for routes and pass them
up and through to zebra so that we are consistent with what
the kernel is telling us.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When the nexthop->type is NEXTHOP_TYPE_IPV4_IFINDEX we
were writing the RTA_PREFSRC 2 times for the build_singlepath
and build_multipath functions.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
