Effectively a massive search and replace of
`struct thread` to `struct event`. Using the
term `thread` gives people the thought that
this event system is a pthread when it is not
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This is a first in a series of commits, whose goal is to rename
the thread system in FRR to an event system. There is a continual
problem where people are confusing `struct thread` with a true
pthread. In reality, our entire thread.c is an event system.
In this commit rename the thread.[ch] files to event.[ch].
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
... the prefix length wasn't ignored as expected. Both S and G are
always /32. But expecting "le 32" in prefix-list config is unexpected &
counterintuitive.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
If PIM had received a register packet with the Border Router
bit set, pimd would have crashed. Since I wrote this code
in 2015 and really have pretty much no memory of this and
no-one has ever reported this crash, let's just remove this
code.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The problem here is when the same node is FHR as well as RP,
then the node keeps on sending the register packet.
Register-stop is not sent as well.
This problem has occurred because the RP is the same node
and there is no socket created on loopback interface, so the
packet is never send out and never received back on the same
node, so register recv could not be processed on the node and
hence no register-stop is sent.
Since register packets are unicast packets, its better to handle
the send of register packet via a separate register socket.
This fixes the problem mentioned above as well.
Fixes: #11331
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
PIM conformance test case 11.12 sends a register stop msg with
source address as 0. This should trigger a register stop for
all the upstreams. It is not happening as such because we are not
considering 0.0.0.0 source address for starg_handling.
Fixed it.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Register and Null register send handling
In IPv6 PIM Null Register message if dummy PIM Header is included as
data, this dummy PIM header checksum needs to be valuated
Signed-off-by: plsaranya <Saranya_Panjarathina@dell.com>
The current code in pim_register_stop_recv would never fail as
that the code was always returning 0 in all cases, but
if the code parses an incorrect afi then it has failed and
should return as much
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
RCA: (*,G) register stop was not handled
Fix: Loop through all (S,G) under the (*,G) and apply reg stop
Authored-by- Saravanan K <saravanank@vmware.com>
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Since `pim_sgaddr` is `pim_addr` now, that causes a whole lot of fallout
anywhere S,G pairs are handled.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Replaces comparison against INADDR_ANY, so we can do IPv6 too.
(Renamed from "pim_is_addr_any" for "pim_addr_*" naming pattern, and
type fixed to bool.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
... and replace with `%pSG` printfrr specifier. This actually used a
static buffer in the formatting function, so subsequent formatting would
overwrite earlier uses.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Mostly just 2 sed calls:
- `sed -e 's%struct prefix_sg%pim_sgaddr%g'`
- `sed -e 's%memset(&sg, 0, sizeof(pim_sgaddr));%memset(\&sg, 0, sizeof(sg));%g'`
Plus a bunch of fixing whatever that broke.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Since this is only used in very few places, moving it out of the way is
reasonable. (`%pSG` will be pim_sgaddr)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Most users of if_lookup_address_exact only cared about whether the
address is any local address. Split that off into a separate function.
For the users that actually need the ifp - which I'm about to add a few
of - change it to prefer returning interfaces that are UP.
(Function name changed due to slight change in behavior re. UP state, to
avoid possible bugs from this change.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Problem :
=======
(*,G) created on transit node where same groups are defined as SSM
At present FRR has SSM checks for IGMP report, but SSM check is missing for PIM join.
Fix :
===
When an interface receives the PIM (*,G)join with G as SSM group, then PIMd supposed to discard that join.
There is no need to maintain PIM state for this group.
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
Line break at the end of the message is implicit for zlog_* and flog_*,
don't put it in the string. Mid-message line breaks are currently
unsupported. (LF is "end of message" in syslog.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
RCA: Upstreams which are in register state other than noinfo, doesnt remove
register tunnel from oif after it becomes nonDR
Fix: scan upstreams with iif as the old dr and check if couldReg becomes false.
If couldreg becomes false from true, remove regiface and stop reg timer.
Do not disturb the entry. Later the entry shall be removed by kat expiry.
Signed-off-by: Saravanan K <saravanank@vmware.com>
When pim receives a register packet, we will apply the
received source to the prefix list. If accepted normal
processing continues. If denied we will send a register
stop message to the source.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We already use the pim pointer a bunch off of pim_ifp->pim
just add another pim variable to allow us to shorten code
a bit.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Issue: REGISTER-STOP Rx is always displaying 0.
Root-cause: pim_ifstat_reg_stop_recv is not getting
incremented when register stop message is received.
Fix: Increment pim_ifstat_reg_stop_recv on receiving
of pim register stop packet.
Signed-off-by: Sarita Patra <saritap@vmware.com>
Criteria for switching to SPT is different on RP and LHR. Re-name
the functions to make that apparent.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
mfcc_parent for an (S, G) entry was being updated on any upstream RPF
change. With the change to use RPT for (S,G) in some cases we can no
longer do that. Instead the upstream entry's RPF neigbor is managed
separately form the channel_oil's mfcc_parent i.e. via NHT. And the
mfcc_parent is evaluated at the time of mroute programming.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
These logs were printing file name which has little value (is always
pim_oil.c). Instead print the caller.
add_oif/del_oif are being called directly from one too many. Instead OIF
setup needs to be consolidated via the PIM state machine. These
debugs are expected to help in understanding what needs to be cleaned up.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
When you turn on `debug igmp trace` we are seeing a bunch
of debugs associated with pim processing. This is because we were
using PIM_DEBUG_TRACE which is both `debug igmp trace` and `debug pim trace`
when tracing igmp code it would be nice to only see igmp work.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This commit includes parsing of Nbit and contructing pim hdr with Nbit
Adding Nbit to PIm hdr structure
Adding Scope zone bit and Bidir bit to Encoded IPv4 Group Address
Signed-off-by: Saravanan K <saravanank@vmware.com>
The unique physical IP is used as the SIP in the ip header to ensure
that pim-register-stop makes it back to the right MLAG switch.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
For multicast vxlan tunnels we register the local VTEP-IP independent
of the prescence of BUM traffic i.e. we prime the pump. This
is acheived via NULL registers.
VxLAN orig entries with upstream in a PIM_REG_JOIN state are linked to
a work list for periodic NULL register transmission. Once the SPT setup
is complete the upstream-entry moves to a PIM_REG_PRUNE state and is
remved from the VxLAN work list.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
