The current OSPF neighbor retransmission operates on a single per-neighbor
periodic timer that sends all LSAs on the list when it expires.
Additionally, since it skips the first retransmission of received LSAs so
that at least the retransmission interval (resulting in a delay of between
the retransmission interval and twice the interval. In environments where
the links are lossy on P2MP networks with "delay-reflood" configured (which
relies on neighbor retransmission in partial meshs), the implementation
is sub-optimal (to say the least).
This commit reimplements OSPF neighbor retransmission as follows:
1. A new data structure making use the application managed
typesafe.h doubly linked list implements an OSPF LSA
list where each node includes a timestamp.
2. The existing neighbor LS retransmission LSDB data structure
is augmented with a pointer to the list node on the LSA
list to faciliate O(1) removal when the LSA is acknowledged.
3. The neighbor LS retransmission timer is set to the expiration
timer of the LSA at the top of the list.
4. When the timer expires, LSAs are retransmitted that within
the window of the current time and a small delta (50 milli-secs
default). The LSAs that are retransmited are given an updated
retransmission time and moved to the end of the LSA list.
5. Configuration is added to set the "retransmission-window" to a
value other than 50 milliseconds.
6. Neighbor and interface LSA retransmission counters are added
to provide insight into the lossiness of the links. However,
these will increment quickly on non-fully meshed P2MP networks
with "delay-reflood" configured.
7. Added a topotest to exercise the implementation on a non-fully
meshed P2MP network with "delay-reflood" configured. The
alternative was to use existing mechanisms to instroduce loss
but these seem less determistic in a topotest.
Signed-off-by: Acee Lindem <acee@lindem.com>
Add a topotest that ensures that when addpath is enabled and two
paths with same nexthop are received, they are sent to ZEBRA which
detects 'duplicate nexthop'.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Some tests may want to use the json facility of iproute2 to
dump some results.
Add an internal API in lib/topotest.py that tells whether iproute2
is json capable or not.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Taking over this development from https://github.com/FRRouting/frr/pull/14788
This commit addresses 4 issues found in the previous PR
1) FRR would accept messages from a spoke without authentication when FRR NHRP had auth configured.
2) The error indication was not being sent in network byte order
3) The debug print in nhrp_connection_authorized was not correctly printing the received password
4) The addresses portion of the mandatory part of the error indication was invalid on the wire (confirmed in wireshark)
Signed-off-by: Dave LeRoy <dleroy@labn.net>
Co-authored-by: Volodymyr Huti <volodymyr.huti@gmail.com>
The isis_tilfa_topo1 topotest is comprehensive and contains a large
amount of reference data. One problem is that, when changes occur,
updating this reference data can be difficult.
To address this problem, this commit introduces a method to
automatically regenerate the reference data by setting the `REGEN_DATA`
environment variable.
Usage:
$ REGEN_DATA=true python3 ./test_isis_tilfa_topo1.py
When `REGEN_DATA` is set, the topotest regenerates reference data
from the current run instead of comparing against existing reference
data. Note that regenerated data must be manually verified for
correctness.
This commit also simplifies the reference data by replacing all diff
files with complete JSON snapshots.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
In this topotest, steps 10-15 were added to test the IS-IS switchover
functionality. In short, two cases were tested: switchover after a
link down event and switchover after a BFD down event. Both cases
were tested in sequence on the same router, rt6. This involved the
following steps:
- Setting the SPF delay timer to 15 seconds
- Shutting down the eth-rt5 interface from the switch side
- Testing the post-switchover RIB and LIB (triggered by the link down
event)
- Testing the post-SPF RIB and LIB
- Bringing the eth-rt5 interface back up
- Configuring a BFD session between rt6 and rt5
- Shutting down the eth-rt5 interface from the switch side once again
- Testing the post-switchover RIB and LIB (triggered by the BFD down
event)
- Testing the post-SPF RIB and LIB
Since the time window to test the post-switchover RIB and LIB was too
narrow (10 seconds), these tests were having sporadic failures.
To resolve this problem, we can simplify the switchover test as follows:
- Setting the SPF delay timer to 60 seconds (not 15)
- Disabling "link-detect" on rt6's eth-rt5 interface
- Shutting down the eth-rt5 interface from the switch side
- On rt6, testing the post-switchover RIB and LIB (triggered by the
BFD down event)
- On rt5, testing the post-switchover RIB and LIB (triggered by the
link down event)
Notice how we can test both post-link-down and post-BFD-down switchover
cases simultaneously by having different "link-detect" configurations
on rt5 and rt6. Additionally, by using a larger SPF delay timer, the
time window to test the post-switchover RIB and LIB is much larger
and less prone to sporadic failures.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Check that "show ip route vrf XXX json" and the JSON at key "XXX" of
"show ip route vrf all json" gives the same output.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
- `darr_free_free` to `darr_free` each element prior to `darr_free`
the array.
- `darr_free_func` to call `func` on each element prior to `darr_free`
the array.
Signed-off-by: Christian Hopps <chopps@labn.net>
Topotest relevant changes:
- add support for `timeout` arg to `cmd_*()`
- handle invalid regexp in CLI commands
- fix long interface name support
Full munet changelog:
munet: 0.14.9: add support for `timeout` arg to `cmd_*()`
munet: 0.14.8: cleanup the cleanup (kill) on launch options
munet: 0.14.7: allow multiple extra commands for shell console init
munet: 0.14.6:
- qemu: gather gcda files where munet can find them
- handle invalid regexp in CLI commands
munet: 0.14.5:
- (podman) pull missing images for containers
- fix long interface name support
- add another router example
munet: 0.14.4: mutest: add color to PASS/FAIL indicators on tty consoles
munet: 0.14.3: Add hostnet node that runs it's commands in the host network namespace.
munet: 0.14.2:
- always fail mutest tests on bad json inputs
- improve ssh-remote for common use-case of connecting to host connected devices
- fix ready-cmd for python v3.11+
munet: 0.14.1: Improved host interface support.
Signed-off-by: Christian Hopps <chopps@labn.net>
The test is done on r2. A BGP update is received on r2, and is
filtered on r2. The RIB of r2 does not have the BGP update stored,
but the ADJ-RIB-IN is yet present. To demonstrate this, if the
inbound route-map is removed, then the BGP update should be copied
from the the ADJ-RIB-IN and added to the RIB with the label
value.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
This test ensures that when r1 changes the label value, then
the new value is automatically propagated to remote peer.
This demonstrates that the ADJ-RIB-OUT to r2 has been correctly
updated.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Only output requested information to stdout so it can be
filtered and captured in shell variables etc...
Signed-off-by: Christian Hopps <chopps@labn.net>
Contains 2 testcases. The first does a basic configuration/connectivity.
The second testcase initiates a shortcut through the primary NHS,
verifies shortcut routes are installed. Primary NHS interface brought
down and verify that the shortcut is not impacted. Finally verify that
after the shortcut expires, it is able to be re-established via a backup
NHS.
Signed-off-by: dleroy <dleroy@labn.net>
Locally this test would occassionally fail for me
because the connected route the sharp route being
installed has not fully come up yet due to heavy
load and start up slowness. Add a bit of code
to look for the problem and make sure it doesn't
happen.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The IPv4 directly connected route prefix exists in both the root LSP and the root's neighbor LSP:
1. When generating vertices for directly connected route prefixes with a metric of 0 based on the root LSP, the isis_spf_preload_tent_ip_reach_cb function only generates vertices of type VTYPE_IPREACH_INTERNAL without distinguishing between area->oldmetric and area->newmetric.
2. When generating vertices for the directly connected route prefix based on the neighbor LSP, the isis_spf_process_lsp function will generate vertices of type VTYPE_IPREACH_INTERNAL and VTYPE_IPREACH_TE based on area->oldmetric and area->newmetric, where the vertex metric is the sum of the metric from the root IS to the neighbor IS and from the neighbor IS to the root IS, respectively.
If area->newmetric=1, the same directly connected route prefix will have both VTYPE_IPREACH_INTERNAL vertices with a metric of 0 and VTYPE_IPREACH_TE vertices with a non-zero metric. During route generation, the isis_spf_loop function will prioritize selecting VTYPE_IPREACH_TE vertices, leading to incorrect metrics for the directly connected routes.
Signed-off-by: zhou-run <166502045+zhou-run@users.noreply.github.com>
fix frrbot styling issues found.
1）fix frrbot styling issues found.
2）Roll back the modifications to TE.
Signed-off-by: zhou-run <166502045+zhou-run@users.noreply.github.com>
Maintain code factorization and avoid duplicating code.
Maintain code factorization and avoid duplicating code.
Signed-off-by: zhou-run <166502045+zhou-run@users.noreply.github.com>
isisd: fix frrbot styling issues found
fix frrbot styling issues found
Signed-off-by: zhou-run <166502045+zhou-run@users.noreply.github.com>
isisd: fix frrbot styling issues found
fix frrbot styling issues found
Signed-off-by: zhou-run <166502045+zhou-run@users.noreply.github.com>
isisd: Resolve compilation issues.
Resolve compilation issues.
Signed-off-by: zhou-run <166502045+zhou-run@users.noreply.github.com>
isisd: Resolve compilation issues.
Resolve compilation issues.
Signed-off-by: zhou-run <166502045+zhou-run@users.noreply.github.com>
isisd: fix frrbot styling issues found
fix frrbot styling issues found
Signed-off-by: zhou-run <166502045+zhou-run@users.noreply.github.com>
isisd: fix frrbot styling issues found
fix frrbot styling issues found
Signed-off-by: zhou-run <166502045+zhou-run@users.noreply.github.com>
isisd: Resolve compilation issues.
Resolve compilation issues.
Signed-off-by: zhou-run <166502045+zhou-run@users.noreply.github.com>
