Show Prefix-SIDs and labels for all available Flex-Algos.
Signed-off-by: Eric Kinzie <ekinzie@labn.net>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Add a function that returns a JSON-C structure containing a representation
of a termtable. This is intended to be a quick way to implement JSON
output to CLI commands.
Signed-off-by: Eric Kinzie <ekinzie@labn.net>
fix typo in indef fabricd comment
Fixes: 20bd27e2aa ("isisd, yang: add configuration model and callback stubs")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Add affinity-map hooks to check the utilization of affinity-map in
flex-algo contexts before its deletion and to update local TLVs when the
affinity-map bit-position is updated.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
As isis_route_verify_merge() builds a new route table, each (src,dst)
new node in the table is created by merging data from the same (src,dst)
pair present in all route tables. However, as it iterates over those
route nodes and copies SR data into the newly created node, it repeatedly
overwrites the isis_route_info pointer. This, in turn, pollutes the
isis_route_info structures in all of the other tables with partially
updated SR data.
After a route is deleted, this leaves pointers to freed memory in one
of the route trees.
Fixes: 26b0598f6b ("isisd: fix isis_route_merge_verify logic")
Signed-off-by: Eric Kinzie <ekinzie@labn.net>
Create a temporary "merge" route table that contains the routing
information from all algorithms and install the merge route table
into the FIB.
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Take into account the flex-algo affinity constraints to compute the SPF
tree.
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Deal with the packing and unpacking of following Flex-Algo
Sub-Sub-TLVs:
- Router Capability (already defined TLV 242)
- List of the Flex-Algo Definitions (Sub-TLV 26)
- Exclude admin group (Sub-Sub-TLV 1)
- Include-any admin group (Sub-Sub-TLV 2)
- Include-all admin group (Sub-Sub-TLV 3)
- Flags (for prefix-metric) (Sub-Sub-TLV 4)
This commit splits data into multiple router capability TLVs if needed
because a TLV cannot contains more than 255 bytes.
Note that the list of SR Algorithm (Sub-TLV 19) within Router Capability
(TLV 242) is already set in a previous commit.
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Eric Kinzie <ekinzie@labn.net>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Add the support of ASLA with the following TLV:
- Extended IS Reachability (already defined TLV 22)
- Application-Specific Link Attributes (Sub-TLV 16)
(to enable the Flex-Algo flag on a link)
- Admin-group (Sub-Sub-TLV 3)
- Extended Admin-group (Sub-Sub-TLV 14)
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Add the frontend functions for the flex-algo configuration.
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Eric Kinzie <ekinzie@labn.net>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Add the backend functions for the flex-algo configuration.
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Eric Kinzie <ekinzie@labn.net>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Adds basic functionality to Flex-Algo for IS-IS wrapping lib/flex_algo.
The configuration interface will be added in the next commit.
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Eric Kinzie <ekinzie@labn.net>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Define the IS-IS flex-algo structure in yang, the CLI configuration
commands and the skeletons of frontend and backend functions that are
called by the CLI code.
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Eric Kinzie <ekinzie@labn.net>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Add a library to deal with Flexible Algorithm that will be common to
IS-IS and OSPF. The functions enables to deal with:
- Affinity-maps
- Extended Admin Group (RFC7308)
- Flex-Algo structures that contains the flex-algo configurations
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Add the ability to configure a Segment-Routing prefix SID for a given
algorithm. For example:
> segment-routing prefix 10.10.10.10/32 algorithm 128 index 100
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Add the ability to configure a Segment-Routing prefix SID for a given
algorithm. For example:
> segment-routing prefix 10.10.10.10/32 algorithm 128 index 100
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Basically in frrouting source code principle,
the log string should not be a complicated abstraction
or streamlined for grep.
But for log format for the "TLV size does not match ..."
can be unified, which makes development easier.
> $ grep "TLV size does not match expected size for" isisd/isis_tlvs.c
> "TLV size does not match expected size for Administrative Group!\n");
> "TLV size does not match expected size for Local IPv6 address!\n");
> ...(snip)...
> "TLV size does not match expected size for Adjacency SID!\n");
> "TLV size does not match expected size for Adjacency SID!\n");
> "TLV size does not match expected size for Adjacency SID!\n");
> "TLV size does not match expected size for LAN-Adjacency SID!\n");
> "TLV size does not match expected size for LAN-Adjacency SID!\n");
> "TLV size does not match expected size for LAN-Adjacency SID!\n");
>
> $ grep "TLV size does not match expected size for" isisd/isis_tlvs.c | wc -l
> 25
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Many of the enum definitions defined in isis_tlvs.h
are often extended at the end. The c/c++ allows
commas at the end of a list. This commit simplifies
the patching of later extensions.
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Before this commit, there was only one sr psid info
included in route_info.
In fact, in RFC8667, Algorithm ID, which is a property of
Prefix-SID, has 8 bits of information. That is, each Prefix
can hold up to 256 Prefix-SIDs. This commit implements it.
The previously implemented single Prefix-SID will be
continued as Algorithm 0.
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Prefix-SID nexthops and backup nexthops are stored respectively in
isis_route_info->nexthops and isis_route_info->backup->nexthops.
With Flex-Algo, there are multiple Prefix-SIDs for a single prefix in
different algorithms. Each of these Prefix-SIDs performs SPF calculation
with a separate contract and sets a nexthops, so it is necessary to
store a different set nexthops for each Prefix-SID.
Add a nexthops and backup nethops list into the Prefix-SID
isis_sr_psid_info struct and use these lists instead of the when needed
After this commit, the nexthops for each Prefix-SID is not
taken from route_info, but the nexthop set inside the
Prefix-SID is taken. This works for backup nexthops as well.
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Refactor IP reachability lsp build to comply with checkpatch:
> WARNING: Too many leading tabs - consider code refactoring
No code logic change.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
isis_tlvs_add_extended_ip_reach adds IS-IS Extended
IP reachability to the LSP. In this case, if the
pcfg argument is not NULL, you can add IGP
Prefix-SID as its sub tlv.
Before this commit, only one Prefix-SID can be added.
After this commit, the argument is not a single
pointer but an array of pointers, and multiple
Prefix-SIDs can be added.
This feature is necessary because Flex-Algo
requires multiple Prefix-SIDs for each Algorithm.
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Before this commit, SR_ALGORITHM_COUNT was set to 2,
and each was hardcoded with router capability tlv.
When Flex-Algo is supported, SR-Algorithm may be
variably supported up to 256.
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
SR Algorithms are independent of specific IGPs
such as IS-IS. This commit adds lib/sr to
aggregate IGP agnostic functions and constants.
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
The information in prefix-sid has a new property
called algorithm id. This is used to identify
the algorithm that separates it in the same IGP
network. This is used in Flex-Algo.In all other
cases, the algorithm id is basically 0.
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Eric Kinzie <ekinzie@labn.net>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
The information in prefix-sid has a new property
called algorithm id. This is used to identify
the algorithm that separates it in the same IGP
network. This is used in Flex-Algo.In all other
cases, the algorithm id is basically 0.
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
The spftree has a new property called algorithm
which is id used to identify the algorithm that
separates it in the same IGP network. This is
used in Flex-Algo. In other cases than Flex-Algo,
the algorithm id is always zero.
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
The tests are killing bgpd and then ending, the next test is checking for all
daemons running and spewing warnings to stderr. Restart the daemons before
ending the test (like other tests in this same module) to avoid this.
Signed-off-by: Christian Hopps <chopps@labn.net>
From commit `411d1a2`, `bgp_delete_nbr_remote_as_line()` is added to
remove some specific bgp neighbors. But, when reloading the following
configuration, it will wrongly remove some good ones:
`neighbor 66.66.66.6 remote-as internal`:
```
router bgp 66
bgp router-id 172.16.204.6
neighbor ANLAN peer-group
neighbor ANLAN remote-as internal
neighbor 66.66.66.6 remote-as internal <- LOST
neighbor 66.66.66.60 peer-group ANLAN
```
The reason is that "66.66.66.6" is included in "66.66.66.60" literally,
then it is mistakenly thought to be a match. Just fix it with
excat match.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
EVPN MH ES reduendant VTEPs need to install
sync MAC as notify inactive and generate
ND:Proxy stamped extended community on Type-2
route.
Ticket:#3436621
Issue:3436621
Testing Done:
tor-11 originates type-2 MAC route:
tor-11# bridge -d fdb show | grep 00:65:00:00:00:01
00:65:00:00:00:01 dev hostbond1 vlan 1000 notify master bridge static
tor-12 receives sync MAC route:
Before fix:
----------
tor-12:/# bridge -d fdb show | grep 00:65:00:00:00:01
00:65:00:00:00:01 dev hostbond1 vlan 1000 notify master bridge static
After fix: inactive is set to MAC entry
----------
tor-12:/#bridge -d fdb show | grep 00:65:00:00:00:01
00:65:00:00:00:01 dev hostbond1 vlan 1000 notify inactive master bridge
static
Notice the difference in `inactive` post notify on tor-12
with the fix.
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
Signed-off-by: Chirag Shah <chirag@nvidia.com>
