The bgp_duplicate_nexthop test installs routes with nexthop's
flags set to both DUPLICATE and FIB: this should not happen.
The DUPLICATE flag of a nexthop indicates this nexthop is already
used in the same nexthop-group, and there is no need to install it
twice in the system; having the FIB flag set indicates that the
nexthop is installed in the system. This is why both flags should
not be set on the same nexthop.
This case happens at installation time, but can also happen
at update time.
- Fix this by not setting the FIB flag value when the DUPLICATE
flag is present.
- Modify the bgp_duplicate_test to check that the FIB flag is not
present on duplicated nexthops.
- Modify the bgp_peer_type_multipath_relax test.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
During the bgp_peer_type_multipath_relax_test, the test does not
check the 'duplicate' flag value of the duplicate nexthop.
Fix this by adding the duplicate value in the expected json files.
Fixes: ee88563ac2 ("bgpd: Add 'bgp bestpath peer-type multipath-relax'")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
1. The lsp_update_data() function will check for the presence of the ISIS_TLV_DYNAMIC_HOSTNAME in the LSP, and then call isis_dynhn_insert() to add a hostname entry corresponding to the LSP ID. However, when the ISIS_TLV_DYNAMIC_HOSTNAME is not present in the LSP, the hostname entry corresponding to the LSP ID should also be deleted.
2. The command “show isis neighbor” invokes isis_adj_name() to display the System ID or hostname, but it does not check the area->dynhostname flag.
3. When the LSP expires and is removed, the corresponding hostname entry should also be deleted.
4. The TLV for LSP fragmentation will not contain the hostname and should be skipped.
Signed-off-by: zhou-run <zhou.run@h3c.com>
In case this is used under `set table X` via route-maps, it's good to know
in debugs the table id.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
1. On P2MP interfaces, direct ack would include the same LSA multiple times
multiple packets are processed before the OSPF interfae direct LSA
acknowledgment event is processed. Now duplicates LSA in the same event
are suppressed.
2. On non-broadcast interfaces, direct acks for multiple neighbors would be
unicast to the same neighbor due to the multiple OSPF LS Update packets
being process prior to the OSPF interface direct ack event. Now, separate
direct acks are unicast to the neighbors requiring them.
3. The interface delayed acknowledgment timer runs would run continously
(every second as long as the interace is up). Now, the timer is set
when delayed acknowledgments are queued and all queued delayed
acknowledges are sent when it fires.
4. For non-broadcast interface delayed acknowledgments, the logic to send
to multiple neighbors wasn't working because the list was emptied while
building the packet for the first neighbor.
Signed-off-by: Acee Lindem <acee@lindem.com>
Since the displayed header of "show ip rip" and "show ipv6 ripng" are changed,
we should update tests of ripd and ripngd.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
Both rip and ripng can import routes from other protocols, e.g. ISIS.
But their header doesn't list the description for these abbreviations.
Adjust `show ipv6 ripng` 's header for display command.
Before:
```
Codes: R - RIPng, C - connected, S - Static, O - OSPF, B - BGP
Sub-codes:
```
After:
```
Codes: K - kernel route, C - connected, L - local, S - static,
R - RIPng, O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR,
f - OpenFabric, t - Table-Direct
Sub-codes:
```
Signed-off-by: anlan_cs <vic.lan@pica8.com>
The ZAPI_MESSAGE_NEXTHOP flag is systematically set, even if the
route message does not include any nexthops. Limit the usage of this
value only when nexthops are present.
Fixes: 8a71d93d85 ("sharpd: Add Super Happy Advanced Routing Protocol")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
In some cases (large scale) it's desired to avoid changing configurations, but
let the BGP to automatically handle ASN changes.
`auto` means the peering can be iBGP or eBGP. It will be automatically detected
and adjusted from the OPEN message.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Instead of using 3 uint8_t variables under struct attr, let's use a single
uint8_t as the flags. Saving 2-bytes. Not a big deal, but it's even easier to
track EVPN-related flags/variables.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Add a new start option "-K" to libfrr to denote a graceful start,
and use it in zebra and bgpd.
zebra will use this option to denote a planned FRR graceful restart
(supporting only bgpd currently) to wait for a route sync completion
from bgpd before cleaning up old stale routes from the FIB. An optional
timer provides an upper-bounds for this cleanup.
bgpd will use this option to denote either a planned FRR graceful
restart or a bgpd-only graceful restart, and this will drive the BGP
GR restarting router procedures.
Signed-off-by: Vivek Venkatraman <vivek@nvidia.com>
Introduce BGP-wide flags to denote if BGP has started gracefully
and GR is in progress or not. Use this for setting of the R-bit in
the GR capability, and not a timer which is set for any new
instance creation. Mark graceful restart is complete when the
deferred path selection has been done and route sync with zebra as
well as deferred EOR advertisement has been initiated.
Introduce a function to check on F-bit setting rather than just
base it on configuration.
Subsequent commits will extend these functionalities.
Signed-off-by: Vivek Venkatraman <vivek@nvidia.com>
