Structure size of bgp_path_info_extra when compiled
with vnc is 184 bytes. Reduce this size to 72 bytes
when compiled w/ vnc but not necessarily turned
on vnc.
With 2 full bgp feeds this saves aproximately 100mb
when compiling with vnc and not using vnc.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Without this change when we change the route-map, we never reinstall the route
if the route-map has changed.
We checked only some attributes like aspath, communities, large-communities,
extended-communities, but ignoring the rest of attributes.
With this change, let's check if the route-map has changed.
bgp_route_map_process_update() is triggered on route-map change, and we set
`changed` to true, which treats aggregated route as not the same as it was before.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Comparing pointers is not the appropriate way to know
if the label values are the same or not. Perform a
memcmp call instead is better.
Fixes: 8ba7105057 ("bgpd: fix valgrind flagged errors")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
https://datatracker.ietf.org/doc/html/draft-uttaro-idr-bgp-oad#section-3.13
Extended communities which are non-transitive across an AS boundary MAY be
advertised over an EBGP-OAD session if allowed by explicit policy configuration.
If allowed, all the members of the OAD SHOULD be configured to use the same
criteria.
For example, the Origin Validation State Extended Community, defined as
non-transitive in [RFC8097], can be advertised to peers in the same OAD.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
If at least one of the candidate routes was received via EBGP, remove from
consideration all routes that were received via EBGP-OAD and IBGP.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
When bgp update is received for EVPN prefix
where for an existing path's nexthop becomes unreachable,
the path is marked as not VALID but the routes
were not unimported from tenant vrfs, which lead to
stale unicast route(s) and nexthop(s).
In Multipath scenario only a specific path may have marked as
not VALID, then specific path info for the EVPN prefix required to be
unimported from tenant vrf.
Ticket: #3671288
Signed-off-by: Chirag Shah <chirag@nvidia.com>
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The MTYPE_BGP memory type was being over used as
both the handler for the bgp instance itself as
well as memory associated with name strings.
Let's separate out the two.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
moved loc-rib uptime field "bgp_rib_uptime" to struct bgp_path_info_extra for memory concerns
moved logic into bgp_route_update's callback bmp_route_update
written timestamp in per peer header
Signed-off-by: Maxence Younsi <mx.yns@outlook.fr>
TODOs that are done/un-necessary now deleted
refactored bmp_route_update to use a modified bmp_process_one function call instead of duplicating similar code
Signed-off-by: Maxence Younsi <mx.yns@outlook.fr>
added time_t field to bgp_path_info
set value before bgp dp hook is called
value not set in the msg yet, testing and double checking is needed before
Signed-off-by: Maxence Younsi <mx.yns@outlook.fr>
set peer type flag to 3 for loc rib monitoring
leave to 0 in other cases like before, even though RFC7854 tells us to set it to 0 1 or 2 depending on the case global/rd/local instance
Signed-off-by: Maxence Younsi <mx.yns@outlook.fr>
At each EBGP boundary, BGP path attributes are modified as per [RFC4271], which includes stripping any IBGP-only attributes.
Some networks span more than one autonomous system and require more flexibility in the propagation of path attributes. It is worth noting that these multi-AS networks have a common or single administrative entity. These networks are said to belong to One Administrative Domain (OAD). It is desirable to carry IBGP-only attributes across EBGP peerings when the peers belong to an OAD.
This document defines a new EBGP peering type known as EBGP-OAD, which is used between two EBGP peers that belong to an OAD. This document also defines rules for route announcement and processing for EBGP-OAD peers.
https://datatracker.ietf.org/doc/html/draft-uttaro-idr-bgp-oad
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Avoid having something like this in outputs:
Before:
```
munet> r1 shi vtysh -c 'show bgp dampening damp'
BGP table version is 10, local router ID is 10.10.10.1, vrf id 0
Default local pref 100, local AS 65001
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
Network From Reuse Path
*d 2001:db8:1::1/128
2001:db8::2 (null) 65002 ?
*d 2001:db8:2::1/128
2001:db8::2 (null) 65002 ?
*d 2001:db8:3::1/128
2001:db8::2 (null) 65002 ?
*d 2001:db8:4::1/128
2001:db8::2 (null) 65002 ?
*d 2001:db8:5::1/128
2001:db8::2 (null) 65002 ?
Displayed 5 routes and 5 total paths
munet> r1 shi vtysh -c 'show bgp dampening flap'
BGP table version is 10, local router ID is 10.10.10.1, vrf id 0
Default local pref 100, local AS 65001
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
Network From Flaps Duration Reuse Path
*d 2001:db8:1::1/128
2001:db8::2 2 00:03:10 (null) 65002 ?
*d 2001:db8:2::1/128
2001:db8::2 2 00:03:10 (null) 65002 ?
*d 2001:db8:3::1/128
2001:db8::2 2 00:03:10 (null) 65002 ?
*d 2001:db8:4::1/128
2001:db8::2 2 00:03:10 (null) 65002 ?
*d 2001:db8:5::1/128
2001:db8::2 2 00:03:10 (null) 65002 ?
Displayed 5 routes and 5 total paths
```
After:
```
munet> r1 shi vtysh -c 'show bgp dampening damp '
BGP table version is 10, local router ID is 10.10.10.1, vrf id 0
Default local pref 100, local AS 65001
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
Network From Reuse Path
*d 2001:db8:1::1/128
2001:db8::2 00:00:00 65002 ?
*d 2001:db8:2::1/128
2001:db8::2 00:00:00 65002 ?
*d 2001:db8:3::1/128
2001:db8::2 00:00:00 65002 ?
*d 2001:db8:4::1/128
2001:db8::2 00:00:00 65002 ?
*d 2001:db8:5::1/128
2001:db8::2 00:00:00 65002 ?
Displayed 5 routes and 5 total paths
munet> r1 shi vtysh -c 'show bgp dampening flap'
BGP table version is 10, local router ID is 10.10.10.1, vrf id 0
Default local pref 100, local AS 65001
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
Network From Flaps Duration Reuse Path
*d 2001:db8:1::1/128
2001:db8::2 2 00:00:15 00:00:00 65002 ?
*d 2001:db8:2::1/128
2001:db8::2 2 00:00:15 00:00:00 65002 ?
*d 2001:db8:3::1/128
2001:db8::2 2 00:00:15 00:00:00 65002 ?
*d 2001:db8:4::1/128
2001:db8::2 2 00:00:15 00:00:00 65002 ?
*d 2001:db8:5::1/128
2001:db8::2 2 00:00:15 00:00:00 65002 ?
Displayed 5 routes and 5 total paths
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Add the ability to store a raw copy of the incoming BGP Link-State
attributes and to redistribute them as is to other routes.
New types of data BGP_ATTR_LS and BGP_ATTR_LS_DATA are defined.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Add the "show bgp link-state link-state" following commands:
> r3# show bgp link-state link-state ?
> <cr>
> all Display the entries for all address families
> detail-routes Display detailed version of all routes
> json JavaScript Object Notation
> neighbors Detailed information on TCP and BGP neighbor connections
> regexp Display routes matching the AS path regular expression
> summary Summary of BGP neighbor status
> version Display prefixes with matching version numbers
> wide Increase table width for longer prefixes
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
BGP link-state prefixes are displayed in the form of NLRI-TYPE /
Prefix-Length.
> r2# show bgp all
>
> For address family: Link State
> BGP table version is 8, local router ID is 192.0.2.2, vrf id 0
> Default local pref 100, local AS 65002
> Network Next Hop Metric LocPrf Weight Path
> *> Link/153 0 65001 i
> *> IPv6-Prefix/77 0 65001 i
> *> IPv4-Prefix/57 0 65001 i
> *> Node/49 0 65001 i
> *> Node/45 0 65001 i
Add a lib prefix display hook in bgpd to display properly all the details.
> r2# show bgp all
>
> For address family: Link State
> BGP table version is 8, local router ID is 192.0.2.2, vrf id 0
> Default local pref 100, local AS 65002
> Network Next Hop Metric LocPrf Weight Path
> *> Link OSPFv3 ID:0xffffffffffffffff {Local {AS:4294967295 ID:4294967295 Area:4294967295 Rtr:10.10.10.11:2.2.2.2} Remote {AS:4294967295 ID:4294967295 Area:4294967295 Rtr:10.10.10.10:1.1.1.1} IPv4:10.1.0.1 Neigh-IPv4:10.1.0.2 IPv6:2001::1 Neigh-IPv6:2001::2 MT:0,2}/153
> 0 65001 i
> *> IPv6-Prefix OSPFv3 ID:0x20 {Local {AS:65001 ID:0 Area:0 Rtr:10.10.10.10} MT:2 OSPF-Route-Type:1 IPv6:12:12::12:12/128}/77
> 0 65001 i
> *> IPv4-Prefix OSPFv2 ID:0x20 {Local {AS:65001 ID:0 Area:0 Rtr:10.10.10.10:1.1.1.1} IPv4:89.10.11.0/24}/57
> 0 65001 i
> *> Node OSPFv2 ID:0x20 {Local {AS:65001 ID:0 Area:0 Rtr:10.10.10.10:1.1.1.1}}/49
> 0 65001 i
> *> Node OSPFv2 ID:0x20 {Local {AS:65001 ID:0 Area:0 Rtr:10.10.10.10}}/45
> 0 65001 i
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
When displaying the link-state prefixes with "show bgp link-state
link-state" command, the following output headers are not needed:
> Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
> i internal, r RIB-failure, S Stale, R Removed
> Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
> Origin codes: i - IGP, e - EGP, ? - incomplete
> RPKI validation codes: V valid, I invalid, N Not found
Do not display these headers for link-state SAFI.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
BGP Link-State prefixes are special prefixes that contains a lot of
data.
Extend the length of the prefix string buffer in order to display
properly this type of prefixes with the next commits.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Add the ability to send link-state prefixes that are in the BGP table.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
