This is a direct copy of:
https://github.com/boutier/quagga-merge
From the branch babel-merge
I copied the babeld directory into FRR and then fixed up everything to
compile.
Babeld at this point in time when run will more than likely crash and burn
in it's interfactions with zebra.
I might have messed up the cli, which will need to be looked at
extract.pl.in and vtysh.c need to be fixed up. Additionally we probably
need to work on DEFUN_NOSH conversion in babeld as well
This code comes from:
Matthieu Boutier <boutier@irif.fr>
Juliusz Chroboczek <jch@irif.fr>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Compile in DataCenter Defaults if --enable-datacenter
is configured instead of --enable-cumulus
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Rename HAVE_POLL to HAVE_POLL_CALL, when compiling with
snmp and poll enabled this was causing issues.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Rename HAVE_POLL to HAVE_POLL_CALL, when compiling with
snmp and poll enabled this was causing issues.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The build system for mpls is a bit convoluted. We need
a way to handle builds across multiple platforms. This,
I believe addresses this issue.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Funnily enough, "gnu11" is gcc's default in 5.x if you don't specify
anything, yet there is no "AC_PROG_CC_C11" in autoconf.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This adds a "-M" option to each daemon, to load dynamic modules at
startup. Modules are by default located in /usr/lib/frr/modules (lib64
if appropriate). Unloading or loading at runtime is not supported at
this point to keep things simple.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Please Note, I will be redoing this commit message with
more information.
Additionally I will rework the lib/* changes into their
own commits.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Centralise read_config/daemonize/dryrun/pidfile/vty_serv into libfrr.
This also makes multi-instance pid/config handling available as part of
the library. It's only wired up in ospfd, but the code is in lib/.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This provides DMVPN support and integrates to strongSwan. Please read
README.nhrpd and README.kernel for more details.
[DL: cherry-picked from dafa05e65fe4b3b3ed5525443f554215ba14f42c]
[DL: merge partially resolved, this commit will not build.]
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This define is used only to guard macros in lib/linklist.h which
themselves are not used anywhere in the codebase and have been marked
deprecated since anno domini 2005
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This define is used only to guard macros in lib/linklist.h which
themselves are not used anywhere in the codebase and have been marked
deprecated since anno domini 2005
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The library libzebra that is installed with FRR will
conflict with Quagga. So let's rename it to libfrr.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
pkg.m4 will be missing on systems that don't have pkg-config installed;
this renders the point of the configure check moot which is to find
pkg-config...
Also, PKG_PROG_PKG_CONFIG should be invoked unconditionally as described
in https://autotools.io/pkgconfig/pkg_check_modules.html
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This configure applies for BGP and keeps old for vpnv4/vpnv6
configuration and exploitation commands.
If not used, this old style vty commands will not be included.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
- the location of ldp_vty_cmds.c can be either in srcdir or builddir,
depending on whether a premade file from a dist tarball is used
- perl libxml support is only needed if that file is absent
- the actual perl script wasn't even included in the dist tarball
- the include location doesn't work when srcdir != builddir
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This replaces Quagga -> FRR in most configure.ac settings as well as
a handful of preprocessor macros in the source code.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This makes the actual change to the manpages to get ./configure effects
applied into them.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The manpages contain references to installation paths and thus should be
preprocessed by ./configure to get the actual paths.
This commit is an exact-rename so the changes for the preprocessing are
easier to review (diffs in renames are hard to read...)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
bison conditionally writes its output to different files based on the
filenames specified in the source code. This could be disabled,
however... flex changes its output filenames when "prefix" is
specified. And ylwrap from <1.11 doesn't understand how to handle the
header file...
...so this requires automake 1.12 which can deal with this properly.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This isn't quite a release candidate yet, but to get things going let's
set this to "2.0-rc0".
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2.0 will be the release just forked off, so this can be 2.0.999 to flag
it as in-progress tree.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Since we have autoconf results from a wide swath of target platforms, we
can go remove checks that have the same result on all systems.
This also removes several "fallback" implementations of functions that,
at some point in the history, weren't available on all target platforms.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Other packages don't have --with-cflags; we don't need it either. The
user can specify CFLAGS= in the environment or on ./configure and that
would work perfectly fine. If only it weren't for autoconf being an
idiot and adding its own "-g -O2" ... so we work around that.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
-rdynamic is needed for useful backtraces and future plugin loading
support. Try and enable it unconditionally.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
- use AS_HELP_STRING in configure.ac
- don't define HAVE_SETNS twice
- remove unused AM_LDFLAGS
- AC_PROG_RANLIB is automatically called by LT_INIT
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Also tag some commands as VTYSH_REALLYALL; these are absolutely
neccessary for correct vtysh operation and will cause "interesting"
breakage if not present on all daemons.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This new command - available for internal use by vtysh and explicit
usage by users - calls "vtysh -w" from watchquagga. This ensures vtysh
is run with privileges to actually write the integrated-config file.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
With the way that vtysh works, it compiles in cli even
if there is no support in the protocols.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This feature adds an L3 & L2 VPN application that makes use of the VPN
and Encap SAFIs. This code is currently used to support IETF NVO3 style
operation. In NVO3 terminology it provides the Network Virtualization
Authority (NVA) and the ability to import/export IP prefixes and MAC
addresses from Network Virtualization Edges (NVEs). The code supports
per-NVE tables.
The NVE-NVA protocol used to communicate routing and Ethernet / Layer 2
(L2) forwarding information between NVAs and NVEs is referred to as the
Remote Forwarder Protocol (RFP). OpenFlow is an example RFP. For
general background on NVO3 and RFP concepts see [1]. For information on
Openflow see [2].
RFPs are integrated with BGP via the RF API contained in the new "rfapi"
BGP sub-directory. Currently, only a simple example RFP is included in
Quagga. Developers may use this example as a starting point to integrate
Quagga with an RFP of their choosing, e.g., OpenFlow. The RFAPI code
also supports the ability import/export of routing information between
VNC and customer edge routers (CEs) operating within a virtual
network. Import/export may take place between BGP views or to the
default zebera VRF.
BGP, with IP VPNs and Tunnel Encapsulation, is used to distribute VPN
information between NVAs. BGP based IP VPN support is defined in
RFC4364, BGP/MPLS IP Virtual Private Networks (VPNs), and RFC4659,
BGP-MPLS IP Virtual Private Network (VPN) Extension for IPv6 VPN . Use
of both the Encapsulation Subsequent Address Family Identifier (SAFI)
and the Tunnel Encapsulation Attribute, RFC5512, The BGP Encapsulation
Subsequent Address Family Identifier (SAFI) and the BGP Tunnel
Encapsulation Attribute, are supported. MAC address distribution does
not follow any standard BGB encoding, although it was inspired by the
early IETF EVPN concepts.
The feature is conditionally compiled and disabled by default.
Use the --enable-bgp-vnc configure option to enable.
The majority of this code was authored by G. Paul Ziemba
<paulz@labn.net>.
[1] http://tools.ietf.org/html/draft-ietf-nvo3-nve-nva-cp-req
[2] https://www.opennetworking.org/sdn-resources/technical-library
Now includes changes needed to merge with cmaster-next.
