It's confusing for a user to see 'Tx RA failed' in the logs when
they've enabled RAs (either through interface config or BGP unnumbered)
on an interface that can't send them. Let's avoid sending RAs on
interfaces that are bridge_slaves or don't have a link-local address,
since they are the two of the most common reasons for RA Tx failures.
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
The bounded vrf of `l2vni/zevpn` have wrong relation with the order
in which vxlan interface and svi interface are set.
If set vxlan interface with vlanid first, then set svi interface with
vrf, it is ok that vxlan interface will get correct `vrf` inherited
from svi. But reverse the set sequence (i.e. set svi first, then vxlan),
vxlan interface can't get correct `vrf`, becasue the handling of
`ZEBRA_VXLIF_VLAN_CHANGE` missed inheritting `vrf` by mistake.
```
host# do show evpn vni 101
VNI: 101
Type: L2
Tenant VRF: vrf1
```
So update `vrf` ("Tenant VRF") of l2vni in `zebra_vxlan_if_update()`.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
Since `NDA_VLAN` is no longer mannually defined in header file,
the check for `NDA_VLAN` should be removed.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
Like `zvni_map_to_svi_ns()` for `ns_walk_func()`, just use "assert"
instead of unnecessary check.
Since these parameters for `ns_walk_func()`, e.g. `in_param` and others,
must not be NULL. So use `assert` to ensure the these parameters, and
remove those unnecessary checks.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
When a client disconnects, we need to check & remove NHT entries for
other SAFIs too. Otherwise we crash later trying to access stale data.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
There exists code paths in the linux kernel where a dump command
will be interrupted( I am not sure I understand what this really
means ) and the data sent back from the kernel is wrong or incomplete.
At this point in time I am not 100% certain what should be done, but
let's start noticing that this has happened so we can formulate a plan
or allow the end operator to know bad stuff is a foot at the circle K.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
In the FreeBSD code if you delete the interface
and it has no configuration, the ifp pointer will
be deleted from the system *but* zebra continues
to dereference the just freed pointer.
==58624== Invalid read of size 1
==58624== at 0x48539F3: strlcpy (in /usr/local/libexec/valgrind/vgpreload_memcheck-amd64-freebsd.so)
==58624== by 0x2B0565: ifreq_set_name (ioctl.c:48)
==58624== by 0x2B0565: if_get_flags (ioctl.c:416)
==58624== by 0x2B2D9E: ifan_read (kernel_socket.c:455)
==58624== by 0x2B2D9E: kernel_read (kernel_socket.c:1403)
==58624== by 0x499F46E: thread_call (thread.c:2002)
==58624== by 0x495D2B7: frr_run (libfrr.c:1196)
==58624== by 0x2B40B8: main (main.c:471)
==58624== Address 0x6baa7f0 is 64 bytes inside a block of size 432 free'd
==58624== at 0x484ECDC: free (in /usr/local/libexec/valgrind/vgpreload_memcheck-amd64-freebsd.so)
==58624== by 0x4953A64: if_delete (if.c:283)
==58624== by 0x2A93C1: if_delete_update (interface.c:874)
==58624== by 0x2B2DF3: ifan_read (kernel_socket.c:453)
==58624== by 0x2B2DF3: kernel_read (kernel_socket.c:1403)
==58624== by 0x499F46E: thread_call (thread.c:2002)
==58624== by 0x495D2B7: frr_run (libfrr.c:1196)
==58624== by 0x2B40B8: main (main.c:471)
==58624== Block was alloc'd at
==58624== at 0x4851381: calloc (in /usr/local/libexec/valgrind/vgpreload_memcheck-amd64-freebsd.so)
==58624== by 0x496A022: qcalloc (memory.c:116)
==58624== by 0x49546BC: if_new (if.c:164)
==58624== by 0x49546BC: if_create_name (if.c:218)
==58624== by 0x49546BC: if_get_by_name (if.c:603)
==58624== by 0x2B1295: ifm_read (kernel_socket.c:628)
==58624== by 0x2A7FB6: interface_list (if_sysctl.c:129)
==58624== by 0x2E99C8: zebra_ns_enable (zebra_ns.c:127)
==58624== by 0x2E99C8: zebra_ns_init (zebra_ns.c:214)
==58624== by 0x2B3FF2: main (main.c:401)
==58624==
Zebra needs to pass back whether or not the ifp pointer
was freed when if_delete_update is called and it should
then check in ifan_read as well as ifm_read that the
ifp pointer is still valid for use.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add new debug output to show the string of the message type that
is currently unhandled:
2022-03-24 18:30:15.284 [DEBG] zebra: [V3NSB-BPKBD] Kernel:
2022-03-24 18:30:15.284 [DEBG] zebra: [HDTM1-ENZNM] Kernel: message seq 792
2022-03-24 18:30:15.284 [DEBG] zebra: [MJD4M-0AAAR] Kernel: pid 594488, rtm_addrs {DST,GENMASK}
2022-03-24 18:30:15.285 [DEBG] zebra: [GRDRZ-0N92S] Unprocessed RTM_type: RTM_NEWMADDR(d)
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When running zebra w/ valgrind, it was noticed that there
was a bunch of passing uninitialized data to the kernel:
==38194== Syscall param ioctl(generic) points to uninitialised byte(s)
==38194== at 0x4CDF88A: ioctl (in /lib/libc.so.7)
==38194== by 0x49A4031: vrf_ioctl (vrf.c:860)
==38194== by 0x2AFE29: vrf_if_ioctl (ioctl.c:91)
==38194== by 0x2AFF39: if_get_mtu (ioctl.c:161)
==38194== by 0x2B12C3: ifm_read (kernel_socket.c:653)
==38194== by 0x2A7F76: interface_list (if_sysctl.c:129)
==38194== by 0x2E9958: zebra_ns_enable (zebra_ns.c:127)
==38194== by 0x2E9958: zebra_ns_init (zebra_ns.c:214)
==38194== by 0x2B3F82: main (main.c:401)
==38194== Address 0x7fc000967 is on thread 1's stack
==38194== in frame #3, created by if_get_mtu (ioctl.c:155)
==38194==
==38194== Syscall param ioctl(generic) points to uninitialised byte(s)
==38194== at 0x4CDF88A: ioctl (in /lib/libc.so.7)
==38194== by 0x49A4031: vrf_ioctl (vrf.c:860)
==38194== by 0x2AFE29: vrf_if_ioctl (ioctl.c:91)
==38194== by 0x2AFED9: if_get_metric (ioctl.c:143)
==38194== by 0x2B12CB: ifm_read (kernel_socket.c:655)
==38194== by 0x2A7F76: interface_list (if_sysctl.c:129)
==38194== by 0x2E9958: zebra_ns_enable (zebra_ns.c:127)
==38194== by 0x2E9958: zebra_ns_init (zebra_ns.c:214)
==38194== by 0x2B3F82: main (main.c:401)
==38194== Address 0x7fc000967 is on thread 1's stack
==38194== in frame #3, created by if_get_metric (ioctl.c:137)
==38194==
==38194== Syscall param ioctl(generic) points to uninitialised byte(s)
==38194== at 0x4CDF88A: ioctl (in /lib/libc.so.7)
==38194== by 0x49A4031: vrf_ioctl (vrf.c:860)
==38194== by 0x2AFE29: vrf_if_ioctl (ioctl.c:91)
==38194== by 0x2B052D: if_get_flags (ioctl.c:419)
==38194== by 0x2B1CF1: ifam_read (kernel_socket.c:930)
==38194== by 0x2A7F57: interface_list (if_sysctl.c:132)
==38194== by 0x2E9958: zebra_ns_enable (zebra_ns.c:127)
==38194== by 0x2E9958: zebra_ns_init (zebra_ns.c:214)
==38194== by 0x2B3F82: main (main.c:401)
==38194== Address 0x7fc000707 is on thread 1's stack
==38194== in frame #3, created by if_get_flags (ioctl.c:411)
Valgrind is no longer reporting these issues.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When `zebra_evpn_mac_svi_add()` adds one found mac by
`zebra_evpn_mac_lookup()` and the found mac is without
svi flag, then call `zebra_evpn_mac_svi_add()` to create
one appropriate mac, but it will call `zebra_evpn_mac_lookup()`
the second time. So lookup twice, the procedure is redundant.
Just an optimization for it, make sure only lookup once.
Modify `zebra_evpn_mac_gw_macip_add()` to check the `macp`
parameter passed by caller, so it can distinguish whether
really need lookup or not.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
When issuing a RTM_DELETE operation and the kernel tells
us that the route is already deleted, let's not complain
about the situation:
2022/03/19 02:40:34 ZEBRA: [EC 100663303] kernel_rtm: 2a10:cc42:1d51::/48: rtm_write() unexpectedly returned -4 for command RTM_DELETE
I can recreate this issue on freebsd by doing this:
a) create a route using sharpd
b) shutdown the nexthop's interface
c) remove the route using sharpd
This would also be true of pretty much any routing protocol's behavior.
Let's just not complain about the situation if a RTM_DELETE
operation is issued and FRR is told that the route does not
exist to delete.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Since the `RB_INSERT()` is called after not found in RB tree, it MUST be ok and
and return zero. The check of returning value of `RB_INSERT()` is redundant,
just remove them.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
Commit: 5d41413833 added 3 new dplane ops:
DPLANE_OP_INTF_INSTALL
DPLANE_OP_INTF_UPDATE
DPLANE_OP_INTF_DELETE
The build system does not build lua so zebra_script.c
was not updated. Update of course!
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When encoding a response to the upper level protocol the
prefixlen is not something that needs to be part of the
switch statement for handling of a prefix.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Currently the nexthop tracking code is only sending to the requestor
what it was requested to match against. When the nexthop tracking
code was simplified to not need an import check and a nexthop check
in b8210849b8 for bgpd. It was not
noticed that a longer prefix could match but it would be seen
as a match because FRR was not sending up both the resolved
route prefix and the route FRR was asked to match against.
This code change causes the nexthop tracking code to pass
back up the matched requested route (so that the calling
protocol can figure out which one it is being told about )
as well as the actual prefix that was matched to.
Fixes: #10766
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Since `zvni_map_to_svi_ns()` is used to find and return one specific interface
based on passed attributes of SVI, so the two parameters `in_param` and `p_ifp`
must not be NULL.
Passing NULL `p_ifp` makes no sense, so the check `if (p_ifp)` is
unnecessary.
So use `assert` to ensure the two parameters, and remove that unnecessary check.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
Upon 'no advertise-all-vni', cleanup l2vni from
its tenant-vrf's l3vni list, instead of passed
zvrf->l3vni which will not be present in case
of default instance.
Reviewed By:
Testing Done:
Before Fix:
----------
TORC12(config-router-af)# advertise-all-vni
TORC12(config-router-af)# end
TORC12# show evpn vni 4001
VNI: 4001
Type: L3
Tenant VRF: vrf1
Vxlan-Intf: vni4001
State: Up
Router MAC: 44:38:39:ff:ff:01
L2 VNIs: 134217728 0 1000 1002 <-----
After Fix:
----------
TORC12# show evpn vni 4001
VNI: 4001
Type: L3
Tenant VRF: vrf1
Vxlan-Intf: vni4001
State: Up
Router MAC: 44:38:39:ff:ff:01
L2 VNIs: 1000 1002
Signed-off-by: Chirag Shah <chirag@nvidia.com>
RMAC keeping list of nexthops to keep track
of its existiance, remove the (old way) host prefix
mapping.
Ticket: #2798406
Reviewed By:
Testing Done:
TORS1# show evpn rmac vni 4001 mac 44:38:39:ff:ff:01
MAC: 44:38:39:ff:ff:01
Remote VTEP: 36.0.0.11
Refcount: 0
Prefixes:
Signed-off-by: Chirag Shah <chirag@nvidia.com>
Keep the list of remote-vteps/nexthops in
rmac db.
Problem:
In CLAG deployment there might be a situation
where CLAG secondary sends individual ip as nexthop
along with anycast mac as RMAC. This combination
is updated in zebra's rmac cache.
Upon recovery at clag secondary sends withdrawal
of the incorrect rmac and nexthop mapping.
The RMAC entry mapping to nh is not cleaned up properly
in the zebra rmac cache.
Fix:
Zebra rmac db needs to maintain a list of nexthops.
When a bgp withdrawal for rmac to nexthop mapping
is received, remove the old nexthop from the rmac's nh
list and if the host reference still remains for
the RMAC,fall back to the nexthop one remaining in
the list.
At most you expect two nexthops mapped to RMAC
(in clag deployment).
Ticket: 2798406
Reviewed By:
Testing Done:
CLAG primary and secondary have advertise-pip enabled
advertise type-5 route (default route) with
individual IP as nh and individual svi mac as rmac.
- disable advertise pip on both clag devices, this
results in advertisement of routes with anycast ip as nh
and anycast mac as rmac.
- disable peerlink on clag primary, this triggers
clag secondary to (transitory) send bgp update with
individual ip as nh and anycast mac as rmac.
- At the remote vtep:
Check the zebra's rmac cache/nh mapping correctly
and points to anycast rmac and anycast ip as nh of the
clag system.
Signed-off-by: Chirag Shah <chirag@nvidia.com>
