Use the proper multi hop hash for matching multi hop peers.
Spotted by Dmitrii Turlupov.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Use ospf6_prefix_same for comparing two exact same prefix
to determine ECMP for a route.
ospf6_route_cmp expects two different prefix rather
being exactly same.
Ticket:CM-22630
Testing Done:
performed ECMP of intra network prefix route via
sending same route via different available
ospf6 paths.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Add the '[no] flood <disable|head-end-replication>' command
to the l2vpn evpn afi/safi sub commands for bgp. This command
when entered as 'flood disable' will turn off type 3 route
generation for the transmittal of the type 3 route necessary
for BUM replication on the remote VTEP. Additionally it will
turn off the BUM handling via the new zebra command,
ZEBRA_VXLAN_FLOOD_CONTROL.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Allow the modification of whether or not we will allow
BUM flooding on the vxlan bridge. To do this allow
the upper level protocol to specify via the ZEBRA_VXLAN_FLOOD_CONTROL
zapi message.
If flooding is disabled then BUM traffic will not be forwarded
to other VTEP's.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
1. "show bgp ipv4 json"
- Added "network" field which displays a prefix in 'prefix/prefixlen' format.
2. "show bgp ipv6 json"
- Added "network" field which displays a prefix in 'prefix/prefixlen' format.
- JSON does not have "prefix", "prefixLen" fields which are present in IPv4
command. Added these fields as they are useful.
3. "show bgp ipv4/ipv6 neighbor <neighbor_addr> advertised-routes json"
- Added "network" field.
4. "show bgp ipv4/ipv6 summary json"
- Added "pfxSnt" for peers. This count is obtained from corresponding
update_subgroup.
5. "show bgp neighbor json"
- Added "sentPrefixCounter"
Signed-off-by: Ameya Dharkar <adharkar@vmware.org>
Work to handle the route-maps, namely the header changes in zebra_vrf.h
and the mapping of using that everywhere
Signed-off-by: vishaldhingra vdhingra@vmware.com
When reading in config files and we have failures on multiple
lines actually note the actual failure lines and return them.
This fixes an issue where we stopped counting errors after
the first one and we got missleading line numbers that
did not correspond to the actual problem.
This is fixed:
sharpd@donna ~/frr> sudo /usr/lib/frr/pimd --log=stdout -A 127.0.0.1 -f /etc/frr/pimd.conf
2018/10/11 09:41:01 PIM: VRF Created: default(0)
2018/10/11 09:41:01 PIM: pim_vrf_enable: for default
2018/10/11 09:41:01 PIM: zclient_lookup_sched_now: zclient lookup immediate connection scheduled
2018/10/11 09:41:01 PIM: zclient_lookup_new: zclient lookup socket initialized
2018/10/11 09:41:01 PIM: pimd 6.1-dev starting: vty@2611
2018/10/11 09:41:01 PIM: [EC 100663304] ERROR: No such command on config line 2: inteface lo
2018/10/11 09:41:01 PIM: [EC 100663304] ERROR: No such command on config line 3: ip igmp
2018/10/11 09:41:01 PIM: [EC 100663304] ERROR: No such command on config line 4: ip igmp join 224.1.1.1 13.13.13.2
^C2018/10/11 09:45:09 PIM: Terminating on signal SIGINT
2018/10/11 09:45:09 PIM: VRF Deletion: default(0)
Fixes: #3161
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When executing vpn route-map config for importation, the running-config
records vrf import route-map instead. Actually, this is a problem when
restarting configuring when using vpn route-map. The choice is done to
move to vrf format, when at least one import list is created for vrfs.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
When a subgroup splits to form a new subgroup because of policy changes
for a peer, new subgroup copies adj out(state about advertised routes)
from the parent subgroup. At the same time, it should also copy
scount(advertised prefix count) to the new subgroup for the count to be
in sync with the adj_out for the subgroup.
Signed-off-by: Ameya Dharkar <adharkar@vmware.org>
Some draft ietf are not handle by :rfc: keyword. A workaround is
proposed, like it has been done for flowspec.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
When cleaning up a interface string, from the linked list we were
dropping the name pointer which held the allocated martian address
intf string.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Track the memory type associated with the bartian address
interface a bit better, instead of using MTYPE_TMP.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Do a straight conversion of `struct bgp_info` to `struct bgp_path_info`.
This commit will setup the rename of variables as well.
This is being done because `struct bgp_info` is not descriptive
of what this data actually is. It is path information for routes
that we keep to build the actual routes nexthops plus some extra
information.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Made changes such that message wont be sent to zebra to validate default
route existence if user configured with “always”.
Signed-off-by: rgirada <rgirada@vmware.com>
