When the underlying networking subsystem is fundamentally
changed via some system controls. If we have msdp running
there exists a possibility that we need to stop some running
timers to prevent a crash.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We have run across a few cases where the startup timeout is
ocurring on heavily loaded systems. This is especially true
in simulation environments where the hypervisor load is
extremely high.
Modify the code base to give ourselves more time to startup.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The zns->ns pointer is not created until we get a callback
from the kernel that a ns exists. This should potentially
fix a crash in the *BSD code path.
Fixes: #2152
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When there are multiple advertisers/paths to reach
Intra-Prefix route, if any path is removed,
re-added back, it does add to the same route node.
ospf6 intra prefix, first stored in oa->route_table
then as part of add cb, it would add to ospf6->route_table
which adds to FIB.
When copying a route with its paths & NHs from oa->table to
ospf6->table the path origin should not be modified otherwise
ospf6->table would not find existing node rather it appends
new node.
Use spf_table to fetch nexthops for a given advertisers/path,
to form effective nexthop list for a route.
Ticket:CM-16139
Testing Done:
R2 ---- R3
| |
R1 ---- R4
Inject Intra Ara Prefix LSA from R1 & R3, validate R2 and R4
having two origination point/paths to reach for a route.
Trigger link flap, frr restart or remove/readd R3's INP one of the
injection point.
Remove link between R4 to R1 and validate R3 carrying single
path to reach prefix.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Customers have requested the ability to name their devices starting
with a number instead of a letter. This fix changes the check for
hostname to allow either a letter or a number.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
The interface itself knows if it is a vrf device or
not, so let's just use a check for that in the decision
if a interface is a loopback or not.
Additionally modify function to return a bool.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In order to be able to configure flowspec from vtysh, the bgp_vty
flowspec file is added into vtysh files to parse.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Upon BGP destroy, the hash list related to PBR are removed.
The pbr_match entries, as well as the contained pbr_match_entries
entries.
Then the pbr_action entries. The order is important, since the former
are referencing pbr_action. So the references must be removed, prior to
remove pbr action.
Also, the zebra associated contexts are removed.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Upon redirect VRF message from FS, add a default route to the VRF
interface associated to the VRF.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
A table chunk of 100000 is allocated from zebra, and when needed in
flowspec, the table identifier is extracted from that chunk.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
If a new rule is identified, a new table identifier is created.
In that table, add a default route when possible. If redirect IP rule is
identified, then add a default route to that IP address.
If redirect VRF is identified, nothing is done for now
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
once an iprule has been created, a notification is sent back, and the
context of bgp_action is searched.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This commit is reading the installed2 value from bgp_pbr_match hash set.
Once value matches with the one received, the walk stops and the last
bgp_pbr_match structure is stored in a static entry, so that the entry
is obtained.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Once the bgp flowspec entry is validated, then that means that zebra is
able to handle the entries.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The API for filling in an IPTABLE_ADD and IPTABLE_DELETE message.
Also, the API is handling the notification callback, so as to know if
zebra managed to add or delete the relevant iptable entry.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Add a policy-route API to handle flowspec entry.
The entry is analysed, converted, and
selected if it is possible to inject the flowspec entry in local policy
routing entries.
redirect IP and redirect VRF actions are handled. The former extracts
the IPv4 address to redirect traffic to. The latter calculates the
matching VRF to redirect traffic to.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This utility routine in bgp ecommunity converts the flowspec actions
into a readable format in a policy routing action context.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This utility function analyses flowspec nlri and converts it into
readable structures. The structure is based on bgp_pbr_match structure
previously defined.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This structure is the model exchange between some bgp services like
flowspec and the policy routing service. This structure reflects what
the nlri entry means. To handle that structure, a dump routine is made
available. Also, a validation function is here to cancel a policy route
installation, whenever it is not possible to install the requested
policy routing.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This command is used to troubleshoot the routes that are installed inbgp
pbr fib, before being injected in zebra.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
bgp structure is being extended with hash sets that will be used by
flowspec to give policy routing facilities.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The APIs that handle ipset and iprule contexts from zebra are being
handled in this commit.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
BGP flowspec will be able to inject or remove policy-routing contexts,
thanks to some protocols like flowspec. This commit adds some the APIS
necessary to create/delete policy routing contexts that will be injected
then into zebra.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
With the usage of a 32 bit number as a integer, but storing
non-signed values in it, we have cases where numbers greater
than 2 billion are being read in and stored and used before
lower value numbers, which of course is awful and mean.
Fixes: #2126
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
As part of recent vpn-vrf leaking changes, it is now possible for a
route to refer to a nexthop in a different vrf. There is also a new
route flag that means "when announcing this route, indicate myself
as the next-hop."
route_vty_out(): nexthops are appended with:
"@VRFID" (where VRFID is the numerical vrf id) when different from
the route's vrf;
"<" when the route's BGP_INFO_ANNC_NH_SELF is set
This change also shows the route table's vrf id in the table header.
route_vty_out_detail(): show nexthop's vrf and announce-nh-self flag if
appropriate.
Both functions are also augmented to add json elements nhVrfId, nhVrfName,
and announceNexthopSelf as appropriate.
The intent of these changes is to make it easier to understand/debug
the relationship between a route and its nexthops.
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
sharpd has started to see some use from our field engineers as
well as people attempting to build/test their environments
as a way of easily injecting a large number of routes.
Modify configure.ac to move sharpd from a development build
option to having to explicity enable it via `--enable-sharpd=yes`
in order for it to be built.
This will allow those who want to build it, to build it without
having to use the development build option.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The building of pbrd from a configure compile option
was not properly setup. This should do that.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The sharp and pbr protocols needed a bit more handling
to be 'right' from a start/stop perspective.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We are missing some handling of PBR and SHARP protocols
for netlink operations w/ the linux kernel.
Additionally add a bread crumb for new developers( or existing )
to know to fixup the rt_netlink.c when we start handling new
route types to hand to the kernel.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
