When we are not using nexthop groups, there is no need to
test for whether or not they are installed correctly or not
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
RFC 7490 says:
"The reverse SPF computes the cost from each remote node to root. This
is achieved by running the normal SPF algorithm but using the link
cost in the direction from the next hop back towards root in place of
the link cost in the direction away from root towards the next hop".
Support for reverse SPF will be necessary later as it's one of the
algorithms used to compute R-LFA/TI-LFA repair paths.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Now that the IS-IS SPF code is more modular, write some unit tests
for it.
This commit includes a new test program called "test_isis_spf" which
can load any test topology (there are 13 different ones available)
and run SPF on any desired node. In the future this same test program
and topologies will also be used to test reverse SPF and TI-LFA.
The "test_common.c" file contains helper functions used to parse the
topology descriptions from "test_topologies.c" into LSP databases
that can be used as an input to the SPF code.
This commit also introduces the F_ISIS_UNIT_TEST flag which is used
to prevent the IS-IS code from scheduling any event when running
under the context of an unit test.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The goal of modularizing the SPF code is to make it possible for
isisd to run SPF in the behalf of other nodes in the network, which
is going to be necessary later when implementing the R-LFA/TI-LFA
solutions. On top of that, a modularized SPF opens the door for
much needed unit testing.
Summary of the changes:
* Change the isis_spf_preload_tent() function to use the local LSP
as an input (as per the ISO specification) instead of populating
the TENT based on the list of local interfaces;
* Introduce the "isis_spf_adj" structure to represent an SPF
adjacency. SPF adjacencies are inferred from the LSPDB, different
from normal adjacencies formed using IIH messages;
* Introduce the F_SPFTREE_NO_ROUTES flag to control whether the
SPT should create routes or not;
* Introduce the F_SPFTREE_NO_ADJACENCIES flag to specify whether
IS-IS adjacency information is available or not. When running SPF
in the behalf of other nodes, or under the context of an unit test,
no adjacency information will be present.
* On isis_area_create(), move some code around so that the area's isis
backpointer is set as early as possible.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Introduce the "show isis route" command to display the routes
associated to an SPF tree. Different from the "show ip route" command,
"show isis route" displays the L1 and L2 routes separately (and not
the best routes only).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
* Bring back some consts that were removed;
* Replace ALL_LIST_ELEMENTS by ALL_LIST_ELEMENTS_RO whenever
possible;
* Fix some CLI return values;
* Remove some unnecessary initializations.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is mostly a cosmetic change to make the code more modular,
more elegant and easier to understand.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Iterating over all IP or IS reachability information from a given
LSP isn't a trivial task. That information is scattered throughout
different TLV types, and which ones need to be used depend on
multiple variables (e.g. the SPF tree address family, MT-ID,
etc). This not to mention that an LSP might consist of multiple
fragments.
Introduce the following two LSP iteration function to facilitate
obtaining IP/IS reachability information from a given LSP:
* isis_lsp_iterate_ip_reach()
* isis_lsp_iterate_is_reach()
These functions will be used extensively by the upcoming TI-LFA
code.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Some Sphinx apis have changed over time; test the installed
version and use the apis that match the version.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Wildcards bits have the opposite representation of a network mask,
example:
192.168.0.0/24 has the following netmask 255.255.0.0 and the wildcard
representation is 0.0.255.255.
To avoid future confusion lets put those definitions into a macro so we
know for sure which form to use.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Match by exact address rather than by prefix match to
determine if we generated the IGMPP query. Othwerwise
we will be ignoring IGMP queries coming from other
hosts on the same subnet.
Signed-off-by: Nathan Bahr <nbahr@atcorp.com>
Reviewed-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
IGMP queries should contain the source address of the IGMP socket
they are being sent from.
Added binding the IGMP sockets to their specific source, otherwise
interfaces with multiple addresses will send multiple queries using
the same source, which is determined by the kernel.
Signed-off-by: Nathan Bahr <nbahr@atcorp.com>
Reviewed-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
IGMP packets received from a source that does not match the subnet
of any configured addresses on the receive interface should be
ignored.
Also, find and use the correct IGMP socket object for the received
IGMP packet.
Signed-off-by: Nathan Bahr <nbahr@atcorp.com>
Signed-off-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
Following PR #6726, Coverity Scan detected some new errors in the OSPF Segment
Routing code. This patch corrects them.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Always fill the buffer provided by the user to prevent unexpected
results and make the function fully reentrant.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
json = NULL; is set in a loop above and here we are trying to check and
free the object again which is never be reached.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
The fuzzing code that is in the master branch is outdated and unused, so it
is worth to remove it to improve readablity of the code.
All the code related to the fuzzing is in the `fuzz` branch.
Signed-off-by: Jakub Urbańczyk <xthaid@gmail.com>
Change the public router stop method to always do a two-phase
shutdown - once without waiting and a second time with a wait.
Ordinary callers need to use this approach when stopping routers.
Move the detailed internal details to a private method that tests
should not call directly.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
If you configure eBGP on loopbacks, you might miss setting the
ebgp-multihop option. Given that, the session will not be established
because of this. Now, the session is in Active state. When you update
your config afterwards and set the ebgp-multihop option to the
appropriate value, the session will still be in Active state. In fact,
it will be stuck in Active state and only services restart will help.
With this change, when set the ebgp-multihop option and no session was
established, reset the session.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
When removing an IPv4 prefix configuration the wrong amount of bytes
will be read from `struct prefix_ipv4` from `DEFPY`, so lets use the
proper function for this.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
When configuring a access list rule with type `any` it is now ambiguous
between cisco and zebra because both have the same syntax, so lets
remove the cisco command to avoid that.
YANG users will not notice this change.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
`nb_cli_enqueue_change` just points to the string values passed in
parameter, so we must use different strings for different function
calls (at least until `nb_cli_apply_changes`).
While here fix a variable name typo/copy paste error on destination host
case.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
The restriction was already lift at the YANG model level, now lets
unlock the CLI as well.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
The extended value must be a part of the cisco choice otherwise it will
be possible to create a destination only part which will cause a crash
when trying to access the assumed mandatory source.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
If you advertise a default route (via default-originate) only if some
prefix is present in the BGP RIB (route-map specified) and this prefix
becomes unavailable, the default route keeps being advertised.
With this change, when we iterate over the BGP RIB to check if we can
advertise the default route, skip unavailable prefixes.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
* Reverted back to using an ALIAS definition for the negated bgp
shutdown command with a concatenated message string.
* Unified cli command descriptions for bgp shutdown commands.
Signed-off-by: David Schweizer <dschweizer@opensourcerouting.org>
