* add files to vtysh_scan when building only fabricd
* don't add isisd/fabricd commands when daemon build is disabled
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
When receiving old copies (e.g. originated before the local ospf6d was
restarted) of supposedly self-originated LSAs which we previously tried to
flush from the network (by setting them to MaxAge), neither flood them nor
add them to our LSDB. Instead, keep the MaxAge version until we actually
(re-)originate them.
Possible fix for #7030. Testcase in #7168
(tests/topotests/ospf6-dr-no-netlsa-bug7030).
Signed-off-by: Martin Buck <mb-tmp-tvguho.pbz@gromit.dyndns.org>
When the ASBR stops announcing a prefix into the NSSA area, the LSA
type 7 is removed from the area. However the ABR is refreshing the
type 5 in its LSDB while removing the Type 7 LSA. Routers outside
the area do not get an update.
With the following topology: r1---r2---r3, with r3 being the ASBR
announcing type 7 LSA:
r3 configuration
router ospf
redistribute static
network 10.0.23.0/24 area 1
area 1 nssa
!
We stop announcing prefix 3.3.3.3 in the ASBR
r3# conf
r3(config)# router ospf
r3(config-router)# no redistribute static
r3(config-router)#
r2 (ABR)
r2# sh ip os database
NSSA-external Link States (Area 0.0.0.1 [NSSA])
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 33.33.33.33 3600 0x8000002f 0x13be E2 3.3.3.3/32 [0x0] <-- flushed
AS External Link States
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 10.0.25.2 7 0x8000002f 0x73c7 E2 3.3.3.3/32 [0x0] <-- refreshed(?)
With PR#7086 the LSA type 5 is flushed from the LSDB in r2 and the change is
announced to routers outside the area (r1)
r2# sh ip os da
NSSA-external Link States (Area 0.0.0.1 [NSSA])
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 33.33.33.33 3600 0x80000002 0x6d91 E2 3.3.3.3/32 [0x0] <-- flushed
AS External Link States
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 10.0.25.2 3600 0x80000002 0xcd9a E2 3.3.3.3/32 [0x0] <-- flushed
r1# sh ip os da
AS External Link States
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 10.0.25.2 3600 0x80000002 0xcd9a E2 3.3.3.3/32 [0x0] <-- flushed
Unfortunately I just realized that with PR#7086 I'm introducing a new bug, as Type-5 LSA
are not being refreshed when reaching MaxAge
r2# sh ip os da
NSSA-external Link States (Area 0.0.0.1 [NSSA])
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 33.33.33.33 35 0x80000002 0x6d91 E2 3.3.3.3/32 [0x0] <--- refreshed
AS External Link States
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 10.0.25.2 3600 0x80000002 0xcd9a E2 3.3.3.3/32 [0x0] <--- not refreshed!
So this PR should fix the original issue and the bug introduced later, so when stopping
redistribution in the ASBR, both type 5 and type 7 are flushed:
r2# sh ip os da
NSSA-external Link States (Area 0.0.0.1 [NSSA])
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 33.33.33.33 3600 0x80000002 0x6d91 E2 3.3.3.3/32 [0x0]
AS External Link States
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 10.0.25.2 3600 0x80000002 0xcd9a E2 3.3.3.3/32 [0x0]
Routers outside the area are also notified
r1# sh ip os da
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 10.0.25.2 3600 0x80000002 0xcd9a E2 3.3.3.3/32 [0x0]
Re-enabling redistribution, both LSA will be advertised again
r3# conf
r3(config)# router ospf
r3(config-router)# no redistribute static
r3(config-router)# redistribute static
r3(config-router)#
r2# sh ip os da
NSSA-external Link States (Area 0.0.0.1 [NSSA])
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 33.33.33.33 19 0x80000001 0x6f90 E2 3.3.3.3/32 [0x0]
AS External Link States
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 10.0.25.2 11 0x80000001 0xcf99 E2 3.3.3.3/32 [0x0]
and they are refreshed when reaching MaxAge
NSSA-external Link States (Area 0.0.0.1 [NSSA])
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 33.33.33.33 10 0x80000002 0x6d91 E2 3.3.3.3/32 [0x0] <-- Seq 2
AS External Link States
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 10.0.25.2 2 0x80000002 0xcd9a E2 3.3.3.3/32 [0x0] <-- Seq 2
Signed-off-by: ckishimo <carles.kishimoto@gmail.com>
The pim-basic suite uses some private python scripts to
send and receive mcast traffic: revise them to support
both py2 and py3.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Having an NSSA ABR redistributing statics, the type-7 LSA are being
continuously refreshed (every ~14 secs). The LSA Seq number keeps
incrementing and the LSA age is going back to 0 when reaching ~14s.
This PR fixes the issue by not forcing the LSA update
However I ignore if the "force" parameter was used in purpose. With this
PR updates are sent in case the metric or metric type are changed
Sep 24 08:54:48 r2 ospfd[7137]: ospf_flood_through: LOCAL NSSA FLOOD of Type-7.
Sep 24 08:55:02 r2 ospfd[7137]: ospf_flood_through: LOCAL NSSA FLOOD of Type-7.
Sep 24 08:55:16 r2 ospfd[7137]: ospf_flood_through: LOCAL NSSA FLOOD of Type-7.
Sep 24 08:55:30 r2 ospfd[7137]: ospf_flood_through: LOCAL NSSA FLOOD of Type-7.
Sep 24 08:55:44 r2 ospfd[7137]: ospf_flood_through: LOCAL NSSA FLOOD of Type-7.
Sep 24 08:55:58 r2 ospfd[7137]: ospf_flood_through: LOCAL NSSA FLOOD of Type-7.
Sep 24 08:56:12 r2 ospfd[7137]: ospf_flood_through: LOCAL NSSA FLOOD of Type-7.
Sep 24 08:56:26 r2 ospfd[7137]: ospf_flood_through: LOCAL NSSA FLOOD of Type-7.
Sep 24 08:56:40 r2 ospfd[7137]: ospf_flood_through: LOCAL NSSA FLOOD of Type-7.
ip route 2.2.2.2/32 blackhole
router ospf
network 10.0.23.0/24 area 1
area 1 nssa
!
r2# conf t
r2(config)# router ospf
r2(config-router)# redistribute static
r2# sh ip os da
NSSA-external Link States (Area 0.0.0.1 [NSSA])
Link ID ADV Router Age Seq# CkSum Route
2.2.2.2 10.0.25.2 13 0x8000000f 0x3f17 E2 2.2.2.2/32 [0x0] <<< Seq: f, age 13
r2# sh ip os da
NSSA-external Link States (Area 0.0.0.1 [NSSA])
Link ID ADV Router Age Seq# CkSum Route
2.2.2.2 10.0.25.2 0 0x80000010 0x3d18 E2 2.2.2.2/32 [0x0] <<< Seq: 10, age 0
r2# sh ip os da
NSSA-external Link States (Area 0.0.0.1 [NSSA])
Link ID ADV Router Age Seq# CkSum Route
2.2.2.2 10.0.25.2 3 0x8000001b 0x2723 E2 2.2.2.2/32 [0x0] <<< Seq: 1b, age 3
Signed-off-by: ckishimo <carles.kishimoto@gmail.com>
b0e9567ed1 fixed an issue whereby
zebra would abort while building an update for a blackhole route.
The same issue, `assert(data_len)` failing in
`zfpm_build_route_updates()`, can be observed when building updates
for unreachable and prohibit routes.
To address this `netlink_route_info_fill()` is updated to not
indicate failure, due to lack of nexthops, for any blackhole routes.
Signed-off-by: Duncan Eastoe <duncan.eastoe@att.com>
When debugging why a route was not successfully installed into the
rib, it would be preferable that the end user only have to turn
on `debug zebra rib detail` as that is what we have been telling
people to do for the last couple of years. Consolidate *back*
to this.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
With l2vni flap leading to duplicate entry creation
in l3vni's l2vni-list.
Use list sorted add with no duplicates.
root@TORC11:mgmt:~# show evpn vni 4001
VNI: 4001
Type: L3
Tenant VRF: vrf1
State: Up
...
L2 VNIs: 1000 1000 1000 0 0 1002
root@TORC11:mgmt:~# ip link set down vx-1002
root@TORC11:mgmt:~# ip link set up vx-1002
root@TORC11:mgmt:~# show evpn vni 4001
VNI: 4001
Type: L3
Tenant VRF: vrf1
State: Up
...
L2 VNIs: 1000 1000 1000 0 0 1002 1002
Ticket:CM-31545
Reviewed By:
Testing Done:
With Fix:
Multiple time flaps vni counts remained the same.
root@TORC11:mgmt:~# ip link set down vx-1002
root@TORC11:mgmt:~# ip link set up vx-1002
root@TORC11:mgmt:~# ip link set down vx-1002
root@TORC11:mgmt:~# ip link set up vx-1002
root@TORC11:mgmt:~# net show evpn vni 4001
VNI: 4001
Type: L3
Tenant VRF: vrf1
State: Up
...
L2 VNIs: 1000 1002
Signed-off-by: Chirag Shah <chirag@nvidia.com>
Previously if there were two multihop peers created that had the same
peer address but different local addresses then the second peer to be
created would be merged with the first one and niether would be able to
be deleted. This was due to an issue in the function bfd_key_lookup().
When the second peer was created its key would be sent into the lookup
function and would reach the last section, even though it shouldn't
have. A check has been placed around the section so that it will not be
entered if a peer is multihop.
Signed-off-by: Tashana Mehta-Wilson <tashana.mehta-wilson@alliedtelesis.co.nz>
Only set the NHG/backup NHG pointers of the caller if the read
of the nexthops was successfull. Otherwise, we might free when not
neccessary or double free.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add the zapi code for encoding/decoding of backup nexthops for when
we are ready for it, but disable it for now so that we revert
to the old way with them.
When zebra gets a proto-NHG with a backup in it, we early fail and
tell the upper level proto. In this case sharpd. Sharpd then reverts
to the old way of installation with the route.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Align the zapi NHG apis to be more consistent with the zapi_route
apis. Add a struct zapi_nhg to use for encodings as well.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add type to the nhg_proto_del API params for sanity checking
that the types of the route sent by the proto matches the type
found with the ID.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add a check for installing nexthop_group greater than multipath
number. Truncate if we hit it and log a warning to the user.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Limit the not re-installation of routes with the same NHG ID
to routes that are using the new NHG PROTO API. This would
only include sharpd and EVPN-MH for now.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add some header documentation to make it clear that you
cannot delete more than one item during each iteration.
Doing so could cause memory corruption for next pointer
if its also deleted from the table.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
In scoring our NHEs during shutdown there is a chance we could release mutliple
NHEs at the same time during one iteration. This can cause memory corruption
if the two being released are directly next to each other in the hash table.
hash_iterate accounts for releasing one during the iteration but not
two by setting hbnext before release but if hbnext is also freed,
we obviously can have a problem.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add the proto Nexthop Group Notify Owner header to
the log command types for string conversion.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Reject proto NHGs of type blackhole/interface for now.
We need to think a bit more about how to resolve these
given the linux kernel needs to know the Address Family
of the routes that will use them and install it with them.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Clean up the function names and remove some TODOs that are no
longer needed/hacks we used for testing.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Get the multipath number checks working with proto-based NHG
message decoding in zapi_msg.c
Modify the function that checks this for routes to work without
being passed a prefix as is the case with NHG creates.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add a flag to track the released state of a proto-based NHG.
This flag is used to know whether the upper level proto has called
the *_del API. Typically, the NHG would just get removed and uninstalled
at this point but there is a chance we are being sent it while routes
are still being owned or we were sent it multiple times. This flag
and associated code handles that.
Ticket: CM-30369
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Implement handling of NHG notifications in sharpd so that
the routes don't attempt to use an NHG ID that did not
successfully get created. If it does not get installed, we
fall back to traditional zapi messaging.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
We currently don't support ADD/DEL/REPLACE with proto-based
NHGs that are not already fully resolved and ifindex/onlink
based. If we are handed one that doesn't have ifindex set
i.e. recursive, gracefully fail and with a notification.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Make the message parameters align better with other zapi
notifications and change the ID to correctly be a uint32.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
When the dataplane detects that we have no need to
reinstall the same route, setup the NEXTHOP_FLAG_FIB
appropriately.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
