Remove when conditions from the yang OM as it degrades
the performance in libyang.
Instead do the same when conditional check in frr northbound
validate phase. Reject the config if condiion do not meet.
Ticket:CM-32530
Testing Done:
Co-developed-by: VishalDhingra <vdhingra@vmware.com>
Signed-off-by: Chirag Shah <chirag@nvidia.com>
modified the yang model for path-list.
table-id should be a key, as one route can have
multiple table-ids.
Signed-off-by: vishaldhingra <vdhingra@vmware.com>
This new daemon manages Segment-Routing Traffic-Engineering
(SR-TE) Policies and installs them into zebra. It provides
the usual yang support and vtysh commands to define or change
SR-TE Policies.
In a nutshell SR-TE Policies provide the possibility to steer
traffic through a (possibly dynamic) list of Segment Routing
segments to the endpoint of the policy. This list of segments
is part of a Candidate Path which again belongs to the SR-TE
Policy. SR-TE Policies are uniquely identified by their color
and endpoint. The color can be used to e.g. match BGP
communities on incoming traffic.
There can be multiple Candidate Paths for a single
policy, the active Candidate Path is chosen according to
certain conditions of which the most important is its
preference. Candidate Paths can be explicit (fixed list of
segments) or dynamic (list of segment comes from e.g. PCEP, see
below).
Configuration example:
segment-routing
traffic-eng
segment-list SL
index 10 mpls label 1111
index 20 mpls label 2222
!
policy color 4 endpoint 10.10.10.4
name POL4
binding-sid 104
candidate-path preference 100 name exp explicit segment-list SL
candidate-path preference 200 name dyn dynamic
!
!
!
There is an important connection between dynamic Candidate
Paths and the overall topic of Path Computation. Later on for
pathd a dynamic module will be introduced that is capable
of communicating via the PCEP protocol with a PCE (Path
Computation Element) which again is capable of calculating
paths according to its local TED (Traffic Engineering Database).
This dynamic module will be able to inject the mentioned
dynamic Candidate Paths into pathd based on calculated paths
from a PCE.
https://tools.ietf.org/html/draft-ietf-spring-segment-routing-policy-06
Co-authored-by: Sebastien Merle <sebastien@netdef.org>
Co-authored-by: Renato Westphal <renato@opensourcerouting.org>
Co-authored-by: GalaxyGorilla <sascha@netdef.org>
Co-authored-by: Emanuele Di Pascale <emanuele@voltanet.io>
Signed-off-by: Sebastien Merle <sebastien@netdef.org>
Reference: https://www.cmand.org/communityexploration
--y2--
/ | \
c1 ---- x1 ---- y1 | z1
\ | /
--y3--
1. z1 announces 192.168.255.254/32 to y2, y3.
2. y2 and y3 tags this prefix at ingress with appropriate
communities 65004:2 (y2) and 65004:3 (y3).
3. x1 filters all communities at the egress to c1.
4. Shutdown the link between y1 and y2.
5. y1 will generate a BGP UPDATE message regarding the next-hop change.
6. x1 will generate a BGP UPDATE message regarding community change.
To avoid sending duplicate BGP UPDATE messages we should make sure
we send only actual route updates. In this example, x1 will skip
BGP UPDATE to c1 because the actual route is the same
(filtered communities - nothing changes).
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
shorten prefix-limit's option name in yang model.
change restart timer to uint16.
Stubbed northbound callbacks with above changes.
Signed-off-by: Chirag Shah <chirag@nvidia.com>
Add the "n-flag-clear" option to the "segment-routing prefix"
command. The only thing that option does is to clear the node
flag of the Prefix-SID, even if it corresponds to a local loopback
address. No changes are necessary other than that in order to fully
support Anycast-SIDs. isisd already supports multiple routers
advertising the same route with the same Prefix-SID after the recent
refactoring. Clearing the node flag for such anycast routes isn't
strictly required, but failure to do so can lead to problems like
TI-LFA picking the wrong Prefix-SID when calculating repair paths.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Fix the following libyang error when trying to load the "frr-nexthop"
module explicitly (e.g. using the 'gen_northbound_callbacks' tool):
libyang: A circular chain of leafrefs detected. (/frr-nexthop:frr-nexthop-group/nexthop-groups/name)
libyang: Invalid value "frr-nexthop-grouping" of "uses". (/frr-nexthop:frr-nexthop-group/frr-nexthop-grouping)
libyang: Copying data from grouping failed. (/frr-nexthop:frr-nexthop-group/frr-nexthop-grouping)
libyang: Module "frr-nexthop" parsing failed.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Don't attempt to put the wildcard information into a 1 byte field
otherwise we'll lose information.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
move `router bgp` nb callback at `bgp` node level
to have access to bgp context at neighbor and peer-group
level and align create/destroy callbacks call during
no router bgp.
Earlier `no router bgp` is performed first global destroy
callback is called which essentially removes `bgp context`
then it calls to remove (parallel nodes) neighbor and peer-group
which does not have access to bgp context.
Moving router bgp at bgp solves this destroy callback ordering issue.
Signed-off-by: Chirag Shah <chirag@nvidia.com>
The "set metric" command wasn't processing metric additions and
subtractions (using + and -) correctly. Fix those problems.
Also, remove the "+metric" and "-metric" options since they don't
work and don't make any sense (they could be interpreted as unitary
increments/decrements but that was never supported).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
1. Added isis with different vrf and it's dependecies.
2. Added new vrf leaf in yang.
3. A minor change for IF_DOWN_FROM_Z passing argrument is
replaced with ifp pointer in api "isis_if_delete_hook()".
4. Minor fix in the isisd spf unit test.
Co-authored-by: Kaushik <kaushik@niralnetworks.com>"
Signed-off-by: harios_niral <hari@niralnetworks.com>
The extended value must be a part of the cisco choice otherwise it will
be possible to create a destination only part which will cause a crash
when trying to access the assumed mandatory source.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
OSPFD sends ARP proactively to speed up convergence for /32 networks
on a p2p connection. It is only an optimization, so it can be disabled.
It is enabled by default.
Signed-off-by: Jakub Urbańczyk <xthaid@gmail.com>
Yang files for bgpd to use northbound APIs
Co-authored-by: Santosh P K <sapk@vmware.com>
Co-authored-by: vishaldhingra <vdhingra@vmware.com>
Signed-off-by: vishaldhingra <vdhingra@vmware.com>
Configuration example:
ip route 9.9.9.9/32 6.6.6.6 color 123
The SR Policy to be chosen is uniquely identified by the policy
endpoint (6.6.6.6) and the SR-TE color (123). Traffic will be
augmented with an MPLS label stack according to the active
candidate path of that particular policy.
Co-authored-by: GalaxyGorilla <sascha@netdef.org>
Signed-off-by: Sebastien Merle <sebastien@netdef.org>
