The commit:
a798241265
attempted to use sorted master lists to do faster lookups
by using a RB Tree. Unfortunately the original code
was creating a list->cmp function *but* never using it.
If you look at the commit, it clearly shows that the
function listnode_add is used to insert but when you
look at that function it is a tail push.
Fixes: #6573
Namely now this ordering is preserved:
bgp as-path access-list originate-only permit ^$
bgp as-path access-list originate-only deny .*
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
... to skip the "Building configuration..." header that gets in the way
of automated processing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This reverts commit d741915ecd.
This is because it breaks this behavior:
router ospf6
<commands>
!
int enp39s0
<more commands>
!
This is a very legal set of commands and completely destroys the
ability to do this.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Replace sprintf with snprintf where straightforward to do so.
- sprintf's into local scope buffers of known size are replaced with the
equivalent snprintf call
- snprintf's into local scope buffers of known size that use the buffer
size expression now use sizeof(buffer)
- sprintf(buf + strlen(buf), ...) replaced with snprintf() into temp
buffer followed by strlcat
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
And again for the name. Why on earth would we centralize this, just so
people can forget to update it?
Signed-off-by: David Lamparter <equinox@diac24.net>
Same as before, instead of shoving this into a big central list we can
just put the parent node in cmd_node.
Signed-off-by: David Lamparter <equinox@diac24.net>
There is really no reason to not put this in the cmd_node.
And while we're add it, rename from pointless ".func" to ".config_write".
[v2: fix forgotten ldpd config_write]
Signed-off-by: David Lamparter <equinox@diac24.net>
The only nodes that have this as 0 don't have a "->func" anyway, so the
entire thing is really just pointless.
Signed-off-by: David Lamparter <equinox@diac24.net>
This removes a warning when ENOENT is returned while backing up the
config. This also provides strerror when backup fails for other reasons.
Signed-off-by: Trey Aspelund <taspelund@cumulusnetworks.com>
This is a full rewrite of the "back end" logging code. It now uses a
lock-free list to iterate over logging targets, and the targets
themselves are as lock-free as possible. (syslog() may have a hidden
internal mutex in the C library; the file/fd targets use a single
write() call which should ensure atomicity kernel-side.)
Note that some functionality is lost in this patch:
- Solaris printstack() backtraces are ditched (unlikely to come back)
- the `log-filter` machinery is gone (re-added in followup commit)
- `terminal monitor` is temporarily stubbed out. The old code had a
race condition with VTYs going away. It'll likely come back rewritten
and with vtysh support.
- The `zebra_ext_log` hook is gone. Instead, it's now much easier to
add a "proper" logging target.
v2: TLS buffer to get some actual performance
Signed-off-by: David Lamparter <equinox@diac24.net>
When extracting the cli for vtysh into vtysh_cmd.c when
the compilation fails it will just silently ignore the
issue and not include the cli in vtysh at all. Leaving
everyone attempting to figure out wtf just happened.
Modify the code to intentionally crash with some modicrum
of a chance to allow the developer to find and fix their
own mistakes.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add a 'copy' cli that reads a file into the current running
config. Add an entry about the new cli to the user doc.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Use an alias for the daemons who process the nexthop-group
config cli; makes it easier to expand that list in the future.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
instead of suppressing the 'exit' markers at the end of each
'interface XXX' clause in the mpls ldp configuration, mark
those with a special marker 'exit-ldp-if' and teach the
reload script to correctly recognize the new sub-subcontext
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
This allows to set motd from an input instead of creating a file.
Example:
root@exit2-debian-9:~/frr# telnet 127.0.0.1 2605
Trying 127.0.0.1...
Connected to 127.0.0.1.
Escape character is '^]'.
Hello, this is bgpd
User Access Verification
Password:
exit2-debian-9> enable
exit2-debian-9# sh run
Current configuration:
!
frr version 7.3-dev-MyOwnFRRVersion
frr defaults traditional
!
hostname exit2-debian-9
password belekas
log file /var/log/frr/labas.log
log syslog informational
banner motd line Hello, this is bgpd
!
!
!
line vty
!
end
exit2-debian-9#
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
frr-reload.py has many special case rules that did not consider ldpd
at all. Specifically:
1. The bulk of ldp configuration comes in a big 'mpls ldp' context, which was
previously considered a single-line context as it started with 'mpls'. This
rule should only apply to labels and lsps.
2. ldp has a 'router-id' config line that fell into the same rule as the above
one. It should not be considered a single-line context as more ldp
configuration can follow.
3. enabled interfaces should not end their context. A better fix
would actually require popping a new context for each interface
in case there is any interface-specific config, but at least this
fix will address the most common use case.
4. when declaring pseudowires, any line with 'member pseudowire XXX' should
be considered a sub-context of the 'l2vpn YYY type ZZZ' context. Without
this fix, changes in the first psuedowire declared would not correctly
be processed (e.g. removing a 'control-word exclude' line would not
be picked up).
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
Guard the libyang debug messages under this command so that only
people interested on those messages will see them.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
getrusage, in a heavily stressed system, can account for
signficant running time due to process switching to the kernel.
Allow the end-operator to specify `--disable-cpu-time` to
avoid this call. Additionally we cause `show thread cpu` to
not show up if this is selected.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The right way to implement this command in vtysh is the following:
* Send the command to each running FRR daemon;
* Collect the command output from each daemon;
* Parse the text outputs into libyang lyd_node structures. Then merge
all these data trees into a single one. Finally, print the merged
data trees to the standard output (libyang will take care of
combining duplicate nodes as necessary).
What this commit does is to allow vtysh to send the "show yang
operational-data" command to a single daemon only (the last
parameter). It's a quick workaround to allow us to write topotests
using YANG-modeled data until we do the real thing (full vtysh
northbound integration).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This command is defined in the lib/northbound_cli.c file, which
is not being parsed by vtysh since most commands from there need
special handling in the context of vtysh. The "debug northbound"
command, however, can be made available to vtysh without problems.
Introduce a new DEFUNSH to do that.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This implements BMP. There's no fine-grained history here, the non-BMP
preparations are already split out from here so all that remains is BMP
proper.
Signed-off-by: David Lamparter <equinox@diac24.net>
Couple code paths end up trying to dereference vty->of which can be null
in one special case.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Add the ability to parse `router eigrp AS [vrf NAME]` and
modify eigrp_lookup to actually handle a vrf_id for us.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The correct cast for these is (unsigned char), because "char" could be
signed and thus have some negative value. isalpha & co. expect an int
arg that is positive, i.e. 0-255. So we need to cast to (unsigned char)
when calling any of these.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
VRF context blocks have a context-specific exit command in order to
explicitly force an exit to the top level config node. This command
exists because 'ip route' commands are accepted in both VRF_NODE and
CONFIG_NODE, so static routes intended to be accepted in CONFIG_NODE
that immediately follow a VRF_NODE block will be shoved into the
VRF_NODE block unless the VRF context is explicitly exited.
However, because this is a command that exits to CONFIG_NODE, vtysh -m
should be printing an `end` at the end of the context, since
frr-reload.py relies on this context ender to know when it's back in
CONFIG_NODE. But since this is the only explicit context exit command
that also exits to CONFIG_NODE we don't really have a good way of doing
this already. Hence this god-awful patch.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Now that multiple daemons understand nexthop-groups, we need
to ensure that vtysh doesn't double print out the individual
nexthops that are part of a nexthop-group.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When using pam for authentication, the code just silently
fails and gives no indication to the end user what has gone
wrong. Try to increase messaging about what has gone wrong
by outputting some more data.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Use %% style for errors in log commands and switch
tabs to a single space in output. Also, remove un-needed
output for success.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add vtysh commands to add/del/clear/show filters across
all daemons and independently on each one. Add automake and
clippy boilerplate for those commands as well.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Update show work-queue to use the execute_name() code
path when dispatching to a specific daemon.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add static function path for exectuting a command
on a client daemon via a string of its name only.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Added a CLI "debug route-map" to enble route-map debugs
Added debugs for following triggers
1. Add/delete a route-map
2. Add/delete a sequence in route-map
3. Add/delete a match statement(dependency)
4. Update a dependency
5. Apply a route-map
Signed-off-by: Ameya Dharkar <adharkar@vmware.com>
When the user specifies -N namespace allow it to influence the
frr_vtydir(DAEMON_VTY_DIR) to have namespace in it's path
like so: $frrstate_dir/<namespace>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Although the RFC states hostname length should be < 255 chars,
FRR allows infinite length technically. However, when you try
to set a hostname > 80 chars, you would immediately notice a crash.
RCA: Crash due to buffer overflow. Large buffer sprintf'd into smaller
buffer. Usage of sprintf function instead of snprintf which is safer.
Signed-off-by: Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
* Change 'begins_with' to 'frrstr_startswith' for consistency
* Add suffix checker, frrstr_endswith()
* Update vtysh to use the new function
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Each of Lua's major versions are incompatible with each other. Ubuntu,
at least, does not provide a single liblua.so or /usr/include/lua; all
SOs and headers are versioned, e.g. liblua5.3.so and
/usr/include/lua5.3. There's already an m4 macro in the GNU collection
to handle this situation, so let's use that.
This allows building with Lua enabled to work on platforms other than
Fedora.
* Move lib/lua.[ch] -> lib/frrlua.[ch] to prevent path conflicts
* Fix configure.ac search for proper CPP and linker flags
* Add Lua include path to AM_CPPFLAGS
* Update vtysh/extract.pl.in
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Merge commit to solve a bunch of conflicts with other PRs that were
merged in the previous weeks.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
I just straight up forgot checking VTYSH_PAGER at startup, and the
"terminal paginate" command is only installed to VIEW_NODE so it can't
be processed from vtysh.conf in CONFIG_NODE...
Signed-off-by: David Lamparter <equinox@diac24.net>
- some target_CFLAGS that needed to include AM_CFLAGS didn't do so
- libyang/sysrepo/sqlite3/confd CFLAGS + LIBS weren't used at all
- consistently use $(FOO_CFLAGS) instead of @FOO_CFLAGS@
- 2 dependencies were missing for clippy
Signed-off-by: David Lamparter <equinox@diac24.net>
