the topolog importation folder must be precised. otherwise following
error message appears:
root@dut-vm:~/topotests/bgp_flowspec# python3 test_bgp_flowspec_topo.py
Traceback (most recent call last):
File "test_bgp_flowspec_topo.py", line 96, in <module>
from lib.lutil import lUtil
File "/root/topotests/bgp_flowspec/../lib/lutil.py", line 25, in <module>
from topolog import logger
ImportError: No module named 'topolog'
root@dut-vm:~/topotests/bgp_flowspec#
The same error occurs with lutil and bgprib which are 2 libraries
located under lib/ folder. Some precisions are added too.
PR=71290
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
python3 does not support execfile implementation.
replace it with open and exec api that are available in both python 2
and 3 implementations.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This new topotest comprises of 13 testing steps and tests essentially
all implemented LFA knobs.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The tests work with the default settings of BFD meaning that bfdd
is able to recognize a 'down' link after ~900ms so a route
recovery should be visible in the RIB after 1 second.
The following topology is used:
+---------+
| |
eth-rt2 (.1) | RT1 | eth-rt3 (.1)
+----------+ 1.1.1.1 +----------+
| | | |
| +---------+ |
| |
| 10.0.2.0/24 |
| |
| eth-rt1 | (.2)
| 10.0.1.0/24 +----+----+
| | |
| | RT3 |
| | 3.3.3.3 |
| | |
(.2) | eth-rt1 +----+----+
+----+----+ eth-rt4 | (.1)
| | |
| RT2 | |
| 2.2.2.2 | 10.0.4.0/24 |
| | |
+----+----+ |
(.1) | eth-rt5 eth-rt3 | (.2)
| +----+----+
| | |
| | RT4 |
| | 4.4.4.4 |
| | |
| +----+----+
| 10.0.3.0/24 eth-rt5 | (.1)
| |
| |
| 10.0.5.0/24 |
| |
| +---------+ |
| | | |
+----------+ RT5 +----------+
eth-rt2 (.2) | 5.5.5.5 | eth-rt4 (.2)
| |
+---------+
Route recovery is tested on RT1. The focus here lies on the two
different routes to RT5. Link failures are generated by taking
down interfaces via the mininet Python interface on RT2 and RT3.
Hence routes are supposed to be adjusted to use RT3 when a link
failure happens on RT2 or vice versa.
Note that only failure recognition and recovery is "fast". BFD
does not monitor a link becoming available again.
Signed-off-by: GalaxyGorilla <sascha@netdef.org>
Commit 4c75f7c773 fixed a bug in which the TI-LFA repair paths
weren't preserving the original Prefix-SID of the routes. That
commit, however, didn't update the zebra interface code to account
for backup nexthops that don't have a repair list but do have a
SR label. As a consequence, backup nexthops that didn't have any
repair label were not preserving the original Prefix-SID of the
corresponding routes. Fix this and update the TI-LFA topotest
accordingly.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Once the remote end of a connected link is shut down (or lose
its address), isisd will remove the corresponding route from its
RIB after SPF runs. A new route for the same destination should
be computed based on the local LSP, and that route by definition
doesn't have any nexthop. The problem is that, when isisd tries
to replace the old route by the new one, it fails because routes
without nexthops can't be installed. That causes the old invalid
route to remain in the RIB when it shouldn't. To fix this problem,
change the zebra interface code to uninstall a route whenever it
can't be installed (because it lacks nexthops) instead of doing
nothing in that case.
This change should fix occasional failures of the test_isis_sr_topo1
topotest.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Fix lib to start loggin to correct daemon file on startup
Fix bgp-auth tests for the logging changes
Fixes Issue # 7545
Signed-off-by: Martin Winter <mwinter@opensourcerouting.org>
1) in generate_ips if start_ipaddr does not have a `/` in it
there exists a code path where both mask and step are
null values. Write a bit of code to ensure this pre-req
is found early and often
2) in verify_rib there exists a code path where static_route
is null when we get to the non static route section. Change
the code to operate on the advertise_network_dict that
we are iterating over.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
1. Added convergence step just after BGP-GR capablities are exchanged and clear bgp
is performed , reason for this is, in few machine bgp sessions are taking more time
to come up.
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
1. Removed UTP test cases keeping only functional test as part of these suites
2. Added convergence step just after BGP-GR capablities are exchanged and clear bgp
is performed, reason for this is, in few machine bgp sessions are taking more time
to come up.
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
Reduce the number of routes used in the route-scale test: we're
having memory troubles, and this may help the CI run with fewer
false failures. Also re-orged the route-scale test code a bit
so it can be driven from the json file, with fewer hard-coded
values.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Add support to compare the number of RIB nexthops, rather than the
specific nexthop addresses. Use this in the bgp_ecmp topotests that
test maximum-paths - testing the specific nexthops is wrong there,
it's not deterministic and we get spurious failures.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Make tests more robust to changing show outputs by searching for
item of interest rather than using a fixed index.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
When all the uplinks are disabled the access ports used for multihoming
are error-disabled/protodowned.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
1. The default startup-delay for multihomed devices is three minutes. While
that is necessary/reasonable for a real network it is not needed for a
test env. Lower the startup-delay to 1s to keep the test run time low.
2. Configure uplinks for mh uplink-tracking
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Add the following Anycast-SIDs on routers rt4 and rt5:
* segment-routing prefix 10.10.10.10/32 index 100 no-php-flag n-flag-clear
* segment-routing prefix 2001:db8:1000::10/128 index 101 no-php-flag n-flag-clear
The updated JSON data will then check whether the Anycast-SIDs are
being processed as expected (e.g. rt1 should use ECMP to rt2 and rt3,
rt2 should use rt4 only as it's directly connected, etc).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When computing backup nexthops for routes that contain a Prefix-SID,
the original Prefix-SID label should be present at the end of
backup label stacks (after the repair labels). This commit fixes
that oversight in the original TI-LFA code. The SPF unit tests and
TI-LFA topotes were also updated accordingly.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is preparatory change for the upcoming SR Prefix-SID
refactoring.
Since Prefix-SID information will be stored inside IS-IS routes
(instead of being maintained separately), it will be necessary to
have local routes in order to store local Prefix-SID information.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Add test for new aggregate address option: test aggregate address option
without converged routes, then test again with a different route map
with converged routes.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Skip comparing neighbor-extended-circuit-id in yang output. They
are not consistent.
This is similar to commit ecc11c93b7 which fixed the same
problem in the IS-IS SR topotest.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
1. Suite: evpn_type5_test_topo1 was added to pytest.ini during triaging phase as
there was bug: https://github.com/FRRouting/frr/issues/6867, which is fixed. Enabling
suite to be run in CI.
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
1. Adding test to verify well known communities: no-export, local-AS, internet
2. Exection time is 90 sec
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
Force faster generation of lsp's and also cause the
networks to converge faster. All affected tests
run faster now.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The bgp_l3vpn_to_bgp_vrf test is looking for a prefix
on multiple routers that the ordered received is non-deterministic.
As such the regex's are failing occassionaly when the
route is received in an unexpected order.
One possible order:
(#89) scripts/check_routes.py:120 COMMAND:ce3:vtysh -c "show bgp ipv4 uni 6.0.1.0":2 available, best .*192.168.1.1.* Local.* 99.0.0.3 from 0.0.0.0 .99.0.0.3.* Origin IGP, metric 200, localpref 50, weight 32768, valid, sourced, local, best .Weight.* Community: 0:67.* Extended Community: RT:89:123.* Large Community: 12:34:56.* Local.* 192.168.1.1 from 192.168.1.1 .192.168.1.1.* Origin IGP, metric 98, localpref 123, valid, internal.* Community: 0:67.* Extended Community: RT:52:100 RT:89:123.* Large Community: 12:34:56:pass:Redundant route 1 details c:
COMMAND OUTPUT:BGP routing table entry for 6.0.1.0/24^M
Paths: (2 available, best #1, table default)^M
Advertised to non peer-group peers:^M
192.168.1.1^M
Local^M
99.0.0.3 from 0.0.0.0 (99.0.0.3)^M
Origin IGP, metric 200, localpref 50, weight 32768, valid, sourced, local, best (Weight)^M
Community: 0:67^M
Extended Community: RT:89:123^M
Large Community: 12:34:56^M
Last update: Wed Oct 7 11:12:22 2020^M
Local^M
192.168.1.1 from 192.168.1.1 (192.168.1.1)^M
Origin IGP, metric 98, localpref 123, valid, internal^M
Community: 0:67^M
Extended Community: RT:52:100 RT:89:123^M
Large Community: 12:34:56^M
Last update: Wed Oct 7 11:12:41 2020:
R:89 ce3 Redundant route 1 details c 1 0
Second possible order:
(#89) scripts/check_routes.py:120 COMMAND:ce3:vtysh -c "show bgp ipv4 uni 6.0.1.0":2 available, best .*192.168.1.1.* Local.* 99.0.0.3 from 0.0.0.0 .99.0.0.3.* Origin IGP, metric 200, localpref 50, weight 32768, valid, sourced, local, best .Weight.* Community: 0:67.* Extended Community: RT:89:123.* Large Community: 12:34:56.* Local.* 192.168.1.1 from 192.168.1.1 .192.168.1.1.* Origin IGP, metric 98, localpref 123, valid, internal.* Community: 0:67.* Extended Community: RT:52:100 RT:89:123.* Large Community: 12:34:56:pass:Redundant route 1 details c:
COMMAND OUTPUT:BGP routing table entry for 6.0.1.0/24^M
Paths: (2 available, best #2, table default)^M
Advertised to non peer-group peers:^M
192.168.1.1^M
Local^M
192.168.1.1 from 192.168.1.1 (192.168.1.1)^M
Origin IGP, metric 98, localpref 123, valid, internal^M
Community: 0:67^M
Extended Community: RT:52:100 RT:89:123^M
Large Community: 12:34:56^M
Last update: Wed Oct 7 11:14:45 2020^M
Local^M
99.0.0.3 from 0.0.0.0 (99.0.0.3)^M
Origin IGP, metric 200, localpref 50, weight 32768, valid, sourced, local, best (Weight)^M
Community: 0:67^M
Extended Community: RT:89:123^M
Large Community: 12:34:56^M
Last update: Wed Oct 7 11:14:27 2020:
R:89 ce3 Redundant route 1 details c 0 1
BGP displays the paths in the order received since it's just a linked list.
For this test modify/add the luCommands to track that we may
receive the paths in a non-deterministic order.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
Add a new topology test for `aggregate-address` to test
`matching-MED-only` and its combination with `summary-only`.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Make sure the all-protocols test_isis_interfaces testcase uses
a regex substitution that includes all the hex characters.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The pim-basic suite uses some private python scripts to
send and receive mcast traffic: revise them to support
both py2 and py3.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Ensure the list of daemons to start is either the one specified
by a caller or the default one from the router configuration.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The linux kernel is getting RTM_F_TRAP and RTM_F_OFFLOAD for
kernel routes that have an underlying asic offload. Write the
code to receive these notifications from the linux kernel and
to store that data for display about the routes.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
1. Added 2 tests to verify bgp route aggregation using summary-only and
as-set commands
2. Execution time is ~90 sec
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
1. Removed initial_wait in ospf library.
2. Removed one test case which was random
failure, will add back after traiging.
Signed-off-by: naveen <nguggarigoud@vmware.com>
1. Adding 18 ospf testcases to topojson.
2. Adding ospf.py library.
Test suite execution time is ~18 minutes.
Signed-off-by: naveen <nguggarigoud@vmware.com>
1. Added linux kernel version check to avoid failures
in CI systems if matching kernel version not found.
Signed-off-by: naveen <nguggarigoud@vmware.com>
We have a bunch of tests that wait *then* check a command for success/failure.
Modify the tests to check *first* then to wait. This reduces test
run times on my system by ~1400 seconds for a full run.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
this test checks connectivity between a vrf-lite device and a vrf-netns
device. this ensures that evpn serice is importing appropriate evpn rt5
entries in the correct vrf.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Modify bgpd.conf in all easily accessible topotests to use 3 10
as their timers du jour. This will allow the tests to converge
faster.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Reduces run time of the bgp_l3vpn_to_bgp_vrf topotests
from ~118 seconds to ~87 seconds by reducing hello timers
in bgp and ospf
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reduce run time of bfd-topo2 from ~62 seconds to ~33 seconds
by modifying the hello/dead intervals for both ospf and ospfv3
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reduce the runtime from ~82 seconds to ~51 seconds by
reducing hello/hold timers for both bgp and ospf.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reduce run time from ~114 seconds to ~55 seconds by
configuring hello/dead interval timers for ospf and ospfv3
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reduce run time from ~76 seconds to ~47 seconds by modifying
both bgp and ospf timers to be more aggressive
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reduce this tests run time from ~76 seconds to ~49 seconds
by decreasing the hello/dead interval timers in ospf
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Decrease run time from ~70 seconds to ~41 seconds by
reducing hello/dead interval timers in ospf
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Decrease run time from ~70 seconds to ~60 seconds
by modifying the hello/dead interval interface timers
in ospf
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reduce ospf-sr-topo1 run time from ~60 seconds to ~30 seconds
by shortening the hello and dead timers.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Convert run times by lowering hello/dead interval timers to
smaller values from ~66 seconds to ~36 seconds.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Initial run of topotests on my machine takes ~210 seconds
With these changes we are at ~40 seconds
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
1. Added test to verify bgp vrf dynamic route leak functionality
2. Total execution time is ~8 mins
3. Added kernel version check, these script would be run for kernel version >= 4.19
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
1. Topotest for isis-vrf is added for ipv4 and ipv6.
2. Test case for checking isis topology.
3. Test case for checking zebra isis routes.
4. Test case for checking linux vrf routes.
5. 2 new API's written in topotest/lib for checking vrf routes.
Co-authored-by: Kaushik <kaushik@niralnetworks.com>"
Signed-off-by: harios_niral <hari@niralnetworks.com>
Avoid unnecessary use of StringIO in one place, use version-
dependent method in another. Remove a couple of other py2->py3
problems.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Change the public router stop method to always do a two-phase
shutdown - once without waiting and a second time with a wait.
Ordinary callers need to use this approach when stopping routers.
Move the detailed internal details to a private method that tests
should not call directly.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
