Add:
- log.warn()
- log.error()
- log.notice()
- log.info()
- log.debug()
to the global namespace for each script
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
Update the two test functions that encode a prefix and an interface to
match the encoder_func signature expected by the scripting infra.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
Rather than let Luaisms propagate from the start, this is some generic
wrapper stuff that defines some semantics for interacting with scripts
that aren't specific to the underlying language.
The concept I have in mind for FRR's idea of a script is:
- has a name
- has some inputs, which have types
- has some outputs, which have types
I don't want to even say they have to be files; maybe we can embed
scripts in frr.conf, for example. Similarly the types of inputs and
outputs are probably going to end up being some language-specific setup.
For now, we will stick to this simple model, but the plan is to add full
object support (ie calling back into C).
This shouldn't be misconstrued as prepping for multilingual scripting
support, which is a bad idea for the following reasons:
- Each language would require different FFI methods, and specifically
different object encoders; a lot of code
- Languages have different capabilities that would have to be brought to
parity with each other; a lot of work
- Languages have *vastly* different performance characteristics; bad
impressions, lots of issues we can't do anything about
- Each language would need a dedicated maintainer for the above reasons;
pragmatically difficult
- Supporting multiple languages fractures the community and limits the
audience with which a given script can be shared
The only pro for multilingual support would be ease of use for users not
familiar with Lua but familiar with one of the other supported
languages. This is not enough to outweigh the cons.
In order to get rich scripting capabilities, we need to be able to pass
representations of internal objects to the scripts. For example, a
script that performs some computation based on information about a peer
needs access to some equivalent of `struct peer` for the peer in
question. To transfer these objects from C-space into Lua-space we need
to encode them onto the Lua stack. This patch adds a mapping from
arbitrary type names to the functions that encode objects of that type.
For example, the function that encodes `struct peer` into a Lua table
could be registered with:
bgp_peer_encoder_func(struct frrscript *fs, struct peer *peer)
{
// encode peer to Lua table, push to stack in fs->scriptinfo->L
}
frrscript_register_type_encoder("peer", bgp_peer_encoder_func);
Later on when calling a script that wants a peer, the plan is to be able
to specify the type name like so:
frrscript_call(script, "peer", peer);
Using C-style types for the type names would have been nice, it might be
possible to do this with preprocessor magic or possibly python
preprocessing later on.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
mergeme no stdlib
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
This was toy code used for testing purposes. Code calling Lua should be
very explicit about what is loaded into the Lua state. Also, the
allocator used is exactly the same allocator used by default w/
luaL_newstate().
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Add a function that will export FRR's logging functions into a Lua
table, and add that table to the table of your choice (usually _ENV).
For instance, to add logging to the global environment:
lua_gettable(L, LUA_REGISTRYINDEX);
lua_gettable(L, LUA_RIDX_GLOBALS);
frrlua_export_logging(L);
Then the following functions are globally accessible to any Lua scripts
running with state L:
- log.debug()
- log.info()
- log.notice()
- log.warn()
- log.error()
These are bound to zlog_debug, zlog_info, etc. They only take one string
argument for now but this shouldn't be an issue given Lua's builtin
facilities for formatting strings.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Use frrlua_* prefix to differentiate from Lua builtins
* Allow frrlua_initialize to pass an empty script
* Fixup naming of table accessors
* Fixup naming of prefix -> table encoder
* Fixup BGP routemap code to new function names
* Fix includes for frrlua.h
* Clean up doc comments
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
As code comment states, 1 count of MTYPE_COMPLETION is leaked for each
autocompleted token. Let's manually decrement the counter before passing
the pointer to readline.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
The function was originally implemented for zebra data plane FPM plugin,
but another code places could use it.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
start_config and end_config are already used as function names in DEFUN,
so the current naming is a little bit confusing. Let's use different
names for arguments.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Add a startup-time option to limit the number of fds used
by the thread/event infrastructure. If nothing is configured,
the system ulimit is used.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The return from sockunion2hostprefix tells us if the conversion
succeeded or not. There are places in the code where we
always assume that it just `works`, since it can fail
notice and try to do the right thing.
Please note that failure of this function for most cases
of sockunion2hostprefix is highly highly unlikely as that
the sockunion was already created and tested elsewhere
it's just that this function can fail.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Modify the code to change from zlog_debug to zlog_err.
vtysh was not outputting the vtysh doc string issues
after a change a couple of months back. By changing
to error level we start seeing them on vtysh start up
again. This will allow us to catch these issues
in the CI runs again.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When a FRR process dies due to SIGILL/SIGABORT/etc attempt
to drain the log buffer. This code change is capturing
some missing logs that were not part of the log file on
a crash.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The `enum zclient_send_status` enum needs to be extended
throughout the code base to use the new states and
to fix up places where we tested against the return
value being non zero.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add a `enum zclient_send_status` for appropriate handling
of return codes from zclient_send_message. Touch all the places
where we handle this.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When FRR sends data over the ZAPI protocol from the upper levels to zebra, indicate
to the calling functions that we have started buffering data to be sent if the
socket is full underneath it.
Also add a call back function `zebra_buffer_write_ready` that we can call
when an upper level protocol's socket buffer has been drained.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The linux kernel is getting RTM_F_OFFLOAD_FAILED for kernel routes
that have failed to offload. Write the code
to receive these notifications from the linux kernel
and store that data for display about the routes.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Move the FOREACH_AFI_SAFI macro from bgpd.h to zebra.h( GLOBAL's YOUALL )
Then convert all the places that have the two level for loop to
iterate over all afi/safis
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The route_map_object_t was being used to track what protocol we were
being called against. But each protocol was only ever calling itself.
So we had a variable that was only ever being passed in from route_map_apply
that had to be carried against and everyone was testing if that variable
was for their own stack.
Clean up this route_map_object_t from the entire system. We should
speed some stuff up. Yes I know not a bunch but this will add up.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
As part of normal processing we allow bgp commands to walk
up the command node chain. We are experiencing this crash:
Thread 1 "bgpd" received signal SIGABRT, Aborted.
__GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50
50 ../sysdeps/unix/sysv/linux/raise.c: No such file or directory.
(gdb) bt
assertion=0x7ffff7f3ba4f "set", file=0x7ffff7f3ba44 "lib/yang.c", line=413, function=<optimized out>)
at assert.c:92
line=413, function=0x7ffff7f3bc50 <__PRETTY_FUNCTION__.9> "yang_dnode_get") at assert.c:101
vty=0x5555561715a0, argc=3, argv=0x555558601620) at bgpd/bgp_vty.c:9568
cmd=0x0) at lib/command.c:937
at lib/command.c:997
matched=0x0, vtysh=0) at lib/command.c:1161
at lib/vty.c:517
(gdb)
9582 bgp_glb_dnode = yang_dnode_get(vty->candidate_config->dnode,
(gdb) p vty->xpath
$8 = {
"/frr-routing:routing/control-plane-protocols/control-plane-protocol[type='frr-bgp:bgp'][name='bgp'][vrf='default']/frr-bgp:bgp", '\000' <repeats 897 times>, '\000' <repeats 1023 times>, '\000' <repeats 1023 times>,
'\000' <repeats 1023 times>, '\000' <repeats 1023 times>, '\000' <repeats 1023 times>, '\000' <repeats 1023 times>,
'\000' <repeats 1023 times>}
(gdb) p vty->xpath_index
$9 = 0
(gdb)
We are effectively sending in an array index based upon vty->xpath_index( which is zero) but
the VTY_CURR_XPATH macro subtracts 1 from that value to find the appropriate xpath to use.
This of course subtracts 1 from 0 and we underflow the array.
The relevant section in a config file is this:
address-family ipv6 flowspec
bgp maxim...
Effectively we were trying to walk up the command chain for flowspec to see
if the command is entered correctly. There is a function vty_check_node_for_xpath_decrement
that was looking at bgp sub-modes to make the decision to allow us to decrement
the vty->xpath_index which did not have the v4 or v6 flowspec bgp sub modes in the
check.
Adding them in fixes the problem.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
calling "skiplist test" and then "skiplist debug",
there was a crash due to a freed pointer.
Agreed to remove static pointer (see PR #7474).
Signed-off-by: Emanuele Bovisio <emanuele.bovisio@eolo.it>
When a BFD integrated session already exists setting the profile
doesn't cause a session update (or vice versa): fix this issue by
handling the other cases.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Let the integration protocol always send the full configuration
instead of saving a few bytes. It will also allow protocols to specify
source address for IPv4 single hop connections and interface for multi
hop configuration.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Issue:
The bgp routes learnt from peers which are not installed in kernel are
advertised to peers. This can cause routers to send traffic to these
destinations only to get dropped. The fix is to provide a configurable
option "bgp suppress-fib-pending". When the option is enabled, bgp will
advertise routes only if it these are successfully installed in kernel.
Fix (Part1) :
* Added message ZEBRA_ROUTE_NOTIFY_REQUEST used by client to request
FIB install status for routes
* Added AFI/SAFI to ZAPI messages
* Modified the functions zapi_route_notify_decode(), zsend_route_notify_owner()
and route_notify_internal() to include AFI, SAFI as parameters
Signed-off-by: kssoman <somanks@gmail.com>
gcc 10 complains about some of our format specs, fix them. Use
atomic size_t in thread stats, to work around platform
differences.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Manage the main pthread's signal mask to avoid a signal-handling
race. Before entering poll, check for pending signals that the
application needs to handle. Use ppoll() to re-enable those
signals during the poll call.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Add an api that blocks application-handled signals (SIGINT,
SIGTERM, e.g.) then tests whether any signals have been received.
This helps to manage a race between signal reception and the poll
call in the main event loop.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
json_array_string_add is used to add a string entry into a JSON
list. This API is needed by zebra so moving it from bgpd to lib.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
DF (Designated forwarder) election is used for picking a single
BUM-traffic forwarded per-ES. RFC7432 specifies a mechanism called
service carving for DF election. However that mechanism has many
disadvantages -
1. LBs poorly.
2. Doesn't allow for a controlled failover needed in upgrade
scenarios.
3. Not easy to hw accelerate.
To fix the poor performance of service carving alternate DF mechanisms
have been proposed via the following drafts -
draft-ietf-bess-evpn-df-election-framework
draft-ietf-bess-evpn-pref-df
This commit adds support for the pref-df election mechanism which
is used as the default. Other mechanisms including service-carving
may be added later.
In this mechanism one switch on an ES is elected as DF based on the
preference value; higher preference wins with IP address acting
as the tie-breaker (lower-IP wins if pref value is the same).
Sample output
=============
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
torm-11# sh bgp l2vpn evpn es 03:00:00:00:00:01:11:00:00:01
ESI: 03:00:00:00:00:01:11:00:00:01
Type: LR
RD: 27.0.0.15:6
Originator-IP: 27.0.0.15
Local ES DF preference: 100
VNI Count: 10
Remote VNI Count: 10
Inconsistent VNI VTEP Count: 0
Inconsistencies: -
VTEPs:
27.0.0.16 flags: EA df_alg: preference df_pref: 32767
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
torm-11# sh bgp l2vpn evpn route esi 03:00:00:00:00:01:11:00:00:01
*> [4]:[03:00:00:00:00:01:11:00:00:01]:[32]:[27.0.0.15]
27.0.0.15 32768 i
ET:8 ES-Import-Rt:00:00:00:00:01:11 DF: (alg: 2, pref: 100)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
In transactional cli mode, bgp address-family <afi> <afi>
node builds xpath on top of `router bgp` node's xpath.
When `exit` is applied under afi-safi commands, retain
xpath_index to 1 to keep using bgp global xpath.
Signed-off-by: Chirag Shah <chirag@nvidia.com>
Make it possible to load YANG modules outside the main northbound
initialization. The primary use case is to support YANG modules
that are specific to an FRR plugin. Example: only load the PCEP
YANG module when the corresponding FRR plugin is loaded. Other use
cases might arise in the future.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Combine yang_snodes_iterate_module() and yang_snodes_iterate_all()
into an unified yang_snodes_iterate() function, where the first
"module" parameter is optional. There's no point in having two
separate YANG schema iteration functions anymore now that they are
too similar.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The only safe way to iterate over all schema nodes of a given YANG
module is by iterating over all schema nodes of all YANG modules
and filter out the nodes that belong to other modules.
The original yang_snodes_iterate_module() code did the following:
1 - Iterate over all top-level schema nodes of the given module;
2 - Iterate over all augmentations of the given module.
While that iteration strategy is more efficient, it does't handle
well more complex YANG hierarchies containing nested augmentations
or self-augmenting modules. Any iteration that isn't done on the
resolved YANG data hierarchy is fragile and prone to errors.
Fixes regression introduced by commit 8a923b4851 where the
gen_northbound_callbacks tool was generating duplicate callbacks
for certain modules.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
- tracepoint() -> frrtrace()
- tracelog() -> frrtracelog()
- tracepoint_enabled() -> frrtrace_enabled()
Also removes copypasta'd #ifdefs for those LTTng macros, those are
handled in lib/trace.h
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
Previous commits added LTTng tracepoints. This was primarily for testing
/ trial purposes; in practice we'd like to support arbitrary tracing
methods, and especially USDT probes, which SystemTap and dtrace expect,
and which are supported on at least one flavor of BSD (FreeBSD).
To that end this patch adds an frr-specific tracing macro, frrtrace(),
which proxies into either DTRACE_PROBEn() or tracepoint() macros
depending on whether --enable-usdt or --enable-lttng is passed at
compile time.
At some point this could be tweaked to allow compiling in both types of
probes. Ideally there should be some logic there to use LTTng's optional
support for generating USDT probes when both are requested.
No additional libraries are required to use USDT, since these probes are
a kernel feature and only need the <sys/sdt.h> header.
- add --enable-usdt to toggle use of LTTng tracepoints or USDT probes
- add new trace.h library header for use with tracepoint definition
headers
- add frrtrace() wrapper macro; this should be used to define
tracepoints instead of using tracepoint() or DTRACE_PROBEn()
Compilation with USDT does nothing as of this commit; the existing LTTng
tracepoints need to be converted to use the frrtrace*() macros in a
subsequent commit.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
hash_get is used for both lookup and insert; add a tracepoint for when
we insert something into the hash
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
LTTng supports tracef() and tracelog() macros, which work like printf,
and are used to ease transition between logging and tracing. Messages
printed using these macros end up as trace events. For our uses we are
not interested in dropping logging, but it is nice to get log messages
in trace output, so I've added a call to tracelog() in zlog that dumps
our zlog messages as trace events.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
This commit adds initial support for LTTng.
When --enable-lttng=no or is not specified, no tracing code is included.
When --enable-lttng=yes, LTTng tracing events are (will be) generated.
configure.ac:
- add --enable-lttng
- define HAVE_LTTNG when enabled
- minimum LTTng version: 2.12.0
lib:
- add trace.[ch]
- update subdir.am
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
Replace all lib/thread cancel macros, use thread_cancel()
everywhere. Only the THREAD_OFF macro and thread_cancel() api are
supported. Also adjust thread_cancel_async() to NULL caller's pointer (if
present).
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Change thread_cancel to take a ** to an event, NULL-check
before dereferencing, and NULL the caller's pointer. Update
many callers to use the new signature.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
