problem
1. run the bgp with -e1 option
2. c t
router bgp 100
3. show running config
!
address-family ipv6 multicast
maximum-paths 1
maximum-paths ibgp 1
exit-address-family
!
address families should not dump maximum-paths if there
value is same as value provided at run time.
fix
if the maxpaths_ebgp value is same as multipath_num global
object, don't dump maximum-paths.
Signed-off-by: vishaldhingra <vdhingra@vmware.com>
If we are attempting to store the bgp name for route
leaking and we find a match do not leak the memory.
Please note this is probably not really going to happen
ever.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The return from sockunion2hostprefix tells us if the conversion
succeeded or not. There are places in the code where we
always assume that it just `works`, since it can fail
notice and try to do the right thing.
Please note that failure of this function for most cases
of sockunion2hostprefix is highly highly unlikely as that
the sockunion was already created and tested elsewhere
it's just that this function can fail.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When using non JSON output, passive connections are marked with:
BGP state = Active (passive)
However, such an information is not available in JSON output. This
commit adds that. It also adds "Active (NSF passive)" flag, like the
regular output.
Signed-off-by: Vincent Bernat <vincent@bernat.ch>
Convert to (DEFUN_YANG) yang modeled neighbor configuration
commands to count them in batched execution as part of backoff timer
introduced as part of PR # 6727
These configuration commands already converted transactional cli
but missed to mark them as (DEFUN_YANG).
Signed-off-by: Chirag Shah <chirag@nvidia.com>
Null-checking "path->attr" suggests that it may be null, but it has
already been dereferenced on all paths leading to the check.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
The `enum zclient_send_status` enum needs to be extended
throughout the code base to use the new states and
to fix up places where we tested against the return
value being non zero.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add a `enum zclient_send_status` for appropriate handling
of return codes from zclient_send_message. Touch all the places
where we handle this.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When FRR sends data over the ZAPI protocol from the upper levels to zebra, indicate
to the calling functions that we have started buffering data to be sent if the
socket is full underneath it.
Also add a call back function `zebra_buffer_write_ready` that we can call
when an upper level protocol's socket buffer has been drained.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Convert usage of the attr->evpn_overlay to get/set functionality.
Future commits will allow us to abstract this data to when
we actually need it for the `struct attr`.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Abstract the access of `attr->cluster` to appropriate
accessor/set functionality.
Future commits will allow us to move this data around
to make `struct attr` smaller.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Convert the `struct attr`->ipv6_ecommunity to use
accessor functions. We'll be able to reduce memory
usage in the `struct bgp_attr` by doing this.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add an accessor for the bgp_attr.pmsi_tnl_type to allow
us to abstract where it is. Every attribute is paying
the price of this bit of data as part of `struct bgp_attr`
In the future we'll move it elsewhere.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When we delete the bgp_path_info_extra data structure free
the aggr_suppressors data structure that was left dangling.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Move the FOREACH_AFI_SAFI macro from bgpd.h to zebra.h( GLOBAL's YOUALL )
Then convert all the places that have the two level for loop to
iterate over all afi/safis
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The recent change to use %pFX missed a code path
where we were displaying a buf that was uninited.
Display the prefix as intended.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
There exists a code path where the esi would be passed
to a debug without the esi being setup with any values
causing us to display what ever is on the stack.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
We are temporarily allocing memory to show lcommunity
information. We then immediately drop it. Account for
that memory properly.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When iterating over the bgp_dest table, using this pattern:
for (dest = bgp_table_top(table); dest;
dest = bgp_route_next(dest)) {
If the code breaks or returns in the middle we will not have
properly unlocked the node as that bgp_table_top locks the top
dest and bgp_route_next locks the next dest and unlocks the old
dest.
From code inspection I have found a bunch of places that
we either return in the middle of or a break is issued.
Add appropriate unlocks.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The route_map_object_t was being used to track what protocol we were
being called against. But each protocol was only ever calling itself.
So we had a variable that was only ever being passed in from route_map_apply
that had to be carried against and everyone was testing if that variable
was for their own stack.
Clean up this route_map_object_t from the entire system. We should
speed some stuff up. Yes I know not a bunch but this will add up.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When entering values for maximum-path if the user
has entered a value to respect from the bgp cli `-e X`
that is the maximum value we should use when accepting
values from the user.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Some of the `show memory` strings in bgp are longer than the
columns we have allocated for it. Shorten some strings to
make them fit and have the output pleasing to the eye.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When a BGP vrf instance is deleted, the routes it exported into the
main VPN table are not deleted and they remain as stale routes
attached to an unknown bgp instance. When the new vrf instance comes
along, it imports these routes from the main table and thus we see
duplicatesalongside its own identical routes.
The solution is to call the unexport logic when a BGP vrf instance is
being deleted.
problem example
---------------
volta1# sh bgp vrf VRF-a ipv4 unicast
BGP table version is 4, local router ID is 18.0.0.1, vrf id 5
Default local pref 100, local AS 567
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 7.0.0.6/32 7.0.0.5@0< 10 100 0 ?
*> 7.0.0.8/32 18.0.0.8 0 0 111 ?
*> 18.0.0.0/24 18.0.0.8 0 0 111 ?
*> 56.0.0.0/24 7.0.0.5@0< 0 100 0 ?
Displayed 4 routes and 4 total paths
volta1# conf t
volta1(config)# no router bgp 567 vrf VRF-a
volta1(config)#
volta1(config)# router bgp 567 vrf VRF-a
volta1(config-router)# bgp router-id 18.0.0.1
volta1(config-router)# no bgp ebgp-requires-policy
volta1(config-router)# no bgp network import-check
volta1(config-router)# neighbor 18.0.0.8 remote-as 111
volta1(config-router)# !
volta1(config-router)# address-family ipv4 unicast
volta1(config-router-af)# label vpn export 12345
volta1(config-router-af)# rd vpn export 567:111
volta1(config-router-af)# rt vpn both 567:100
volta1(config-router-af)# export vpn
volta1(config-router-af)# import vpn
volta1(config-router-af)# exit-address-family
volta1(config-router)# !
volta1(config-router)# end
volta1# sh bgp vrf VRF-a ipv4 unicast
BGP table version is 4, local router ID is 18.0.0.1, vrf id 5
Default local pref 100, local AS 567
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 7.0.0.6/32 7.0.0.5@0< 10 100 0 ?
* 7.0.0.8/32 18.0.0.8 0 0 111 ?
*> 18.0.0.8@-< 0 0 111 ?
* 18.0.0.0/24 18.0.0.8 0 0 111 ?
*> 18.0.0.8@-< 0 0 111 ?
*> 56.0.0.0/24 7.0.0.5@0< 0 100 0 ?
Displayed 4 routes and 6 total paths
@- routes indicating unknown bgp instance are imported
Signed-off-by: Pat Ruddy <pat@voltanet.io>
if the user sets the ebgp-multihop for a neighbor to the same value
we currently have, avoid resetting the session and just return a
silent success.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
Commit: 26742171e6
Mistakenly reversed the logic for the test on the list length
when it was removed. Fix this.
Additionally limit for loop to stop when we know there are no
more items to process that have the BGP_NODE_SELECT_DEFER flag.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Addressed the gcc-10 buffer overflow warnings.
Put a sanity check of not using prefix for
neighbor update-source with interface option.
Signed-off-by: Chirag Shah <chirag@nvidia.com>
* Process FIB update in bgp_zebra_route_notify_owner() and call
group_announce_route() if route is installed
* When bgp update is received for a route which is not installed earlier
(flag BGP_NODE_FIB_INSTALLED is not set) and suppress fib is enabled
set the flag BGP_NODE_FIB_INSTALL_PENDING to indicate fib install is
pending for the route. The route will be advertised when zebra send
ZAPI_ROUTE_INSTALLED status.
* The advertisement delay (BGP_DEFAULT_UPDATE_ADVERTISEMENT_TIME)
is added to allow more routes to be sent in single update message.
This is required since zebra sends route notify message for each route.
The delay will be applied to update group timer which advertises
routes to peers.
Signed-off-by: kssoman <somanks@gmail.com>
* Added CLI command "[no] bgp suppress-fib-pending" to enable and
disable suppress-fib-pending
* Send ZEBRA_ROUTE_NOTIFY_REQUEST to zebra when "bgp suppress-fib-pending"
is enabled or disabled
* Define BGP_DEFAULT_UPDATE_ADVERTISEMENT_TIME which is the delay added
to update group timer.
* Added error codes
Signed-off-by: kssoman <somanks@gmail.com>
The code is returning the group peer data structure, which
is what is happening but we should not have assignment statements
in this return statement for a `struct peer *` return.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
We are allocating temporary memory for information about
what to process in this thread, which is not being cleaned
up on thread cancelling.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
gcc 10 complains about some of our format specs, fix them. Use
atomic size_t in thread stats, to work around platform
differences.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The `struct listnode *rt_node` data structure is adding
8 bytes of size to the `struct bgp_dest`. This is a large
amount of data for a flag we are already setting on each
node for this. Just set the flag and use that to figure
out who we are doing graceful restart on.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When generating a config with 1 prefix:
BGP IPv4 Unicast RIB statistics
Total Advertisements : 0
Total Prefixes : 0
Average prefix length : 0.00
Unaggregateable prefixes : 0
Maximum aggregateable prefixes: 0
BGP Aggregate advertisements : 0
Address space advertised : 0
% announced : 0.00
/8 equivalent : 0.00
/24 equivalent : 0.00
Advertisements with paths : 0
Longest AS-Path (hops) : 0
Average AS-Path length (hops) : 0.00
Largest AS-Path (bytes) : 0
Average AS-Path size (bytes) : 0.00
Highest public ASN : 0
eva# show bgp ipv4 uni summ
BGP router identifier 10.10.3.11, local AS number 329 vrf-id 0
BGP table version 1
RIB entries 1, using 192 bytes of memory
Peers 1, using 23 KiB of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt
192.168.161.131 4 60000 24 27 0 0 0 00:01:05 (Policy) 1
Total number of neighbors 1
We are not displaying it in the statistics data. This is because FRR is walking the associated
table and comparing the current dest to the top of the tree. I have no idea why this is
the case as that when you have 1 prefix you only have 1 node in your tree. Looking at the
code this is the original code that was imported in 2006. I cannot think of any reason why
FRR needs to exclude this particular node.
Fixed:
eva# show bgp ipv4 uni summ
BGP router identifier 10.10.3.11, local AS number 329 vrf-id 0
BGP table version 1
RIB entries 1, using 192 bytes of memory
Peers 1, using 23 KiB of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt
192.168.161.131 4 60000 24 27 0 0 0 00:01:05 (Policy) 1
Total number of neighbors 1
eva# show bgp ipv4 statistics
BGP IPv4 Unicast RIB statistics (VRF default)
Total Advertisements : 1
Total Prefixes : 1
Average prefix length : 32.00
Unaggregateable prefixes : 1
Maximum aggregateable prefixes: 0
BGP Aggregate advertisements : 0
Address space advertised : 1
% announced : 0.00
/8 equivalent : 0.00
/24 equivalent : 0.00
Advertisements with paths : 1
Longest AS-Path (hops) : 0
Average AS-Path length (hops) : 0.00
Largest AS-Path (bytes) : 0
Average AS-Path size (bytes) : 0.00
Highest public ASN : 0
eva#
Fixes: #7422
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Additional cli commands to add dampening profiles to peers / peer groups
and functions to save dampening configurations.
Signed-off-by: David Schweizer <dschweizer@opensourcerouting.org>
Changes implement dampening profiles for peers and peer groups. This is
achieved by introducing the possibility to have multible existing
dampening configurations with their own sets of parameters and lists of
associated paths.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Signed-off-by: David Schweizer <dschweizer@opensourcerouting.org>
The multipath arrays are always being allocated, irrelevant
if we actually have multipath information for a prefix.
This is because the link bandwidth code was always adding the
data structure. We should not be allocated multipath information
unless we actually have multipath information
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
We were missing the help docstring for IPV6 under the
distance src command in for bgp.
```
[root@alfred frr-2]# /usr/lib/frr/bgpd --log stdout --log-level debug
2020/10/30 16:02:26 BGP: Ran out of docstring while parsing '[no] distance (1-255) <A.B.C.D/M | X:X::X:X/M>$prefix [WORD$acl]'
2020/10/30 16:02:26 BGP: Ran out of docstring while parsing '[no] distance (1-255) <A.B.C.D/M | X:X::X:X/M>$prefix [WORD$acl]'
2020/10/30 16:02:26 BGP: Ran out of docstring while parsing '[no] distance (1-255) <A.B.C.D/M | X:X::X:X/M>$prefix [WORD$acl]'
2020/10/30 16:02:26 BGP: Ran out of docstring while parsing '[no] distance (1-255) <A.B.C.D/M | X:X::X:X/M>$prefix [WORD$acl]'
2020/10/30 16:02:26 BGP: Ran out of docstring while parsing '[no] distance (1-255) <A.B.C.D/M | X:X::X:X/M>$prefix [WORD$acl]'
```
Signed-off-by: Stephen Worley <sworley@nvidia.com>
The problem is that only prefixes were handled and any other `match`
commands were ignored. Let's do not forget them as well.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
There are some situations where we create a ecommunity for
comparing to internal state when we are deleting, but in the
failure cases we would not free up the created memory.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
shorten prefix-limit's option name in yang model.
change restart timer to uint16.
Stubbed northbound callbacks with above changes.
Signed-off-by: Chirag Shah <chirag@nvidia.com>
Sample Configuration with prefix-list and community match rules
---------------------------------------------------------------
R1 ------- R2(DUT) ------- R3
Router2# show running-config
Building configuration...
Current configuration:
!
frr version 7.6-dev-MyOwnFRRVersion
frr defaults traditional
hostname router
log file /var/log/frr/bgpd.log
log syslog informational
hostname Router2
service integrated-vtysh-config
!
debug bgp updates in
debug bgp updates out
!
debug route-map
!
ip route 20.20.0.0/16 blackhole
ipv6 route 2001:db8::200/128 blackhole
!
interface enp0s9
ip address 10.10.10.2/24
!
interface enp0s10
ip address 10.10.20.2/24
!
interface lo
ip address 2.2.2.2/32
!
router bgp 2
bgp log-neighbor-changes
no bgp ebgp-requires-policy
neighbor 10.10.10.1 remote-as 1
neighbor 10.10.20.3 remote-as 3
!
address-family ipv4 unicast
neighbor 10.10.10.1 soft-reconfiguration inbound
neighbor 10.10.20.3 soft-reconfiguration inbound
neighbor 10.10.20.3 advertise-map ADV-MAP non-exist-map EXIST-MAP
exit-address-family
!
ip prefix-list DEFAULT seq 5 permit 1.1.1.5/32
ip prefix-list DEFAULT seq 10 permit 1.1.1.1/32
ip prefix-list EXIST seq 5 permit 10.10.10.10/32
ip prefix-list DEFAULT-ROUTE seq 5 permit 0.0.0.0/0
ip prefix-list IP1 seq 5 permit 10.139.224.0/20
ip prefix-list T2 seq 5 permit 1.1.1.5/32
!
bgp community-list standard DC-ROUTES seq 5 permit 64952:3008
bgp community-list standard DC-ROUTES seq 10 permit 64671:501
bgp community-list standard DC-ROUTES seq 15 permit 64950:3009
bgp community-list standard DEFAULT-ROUTE seq 5 permit 65013:200
!
route-map ADV-MAP permit 10
match ip address prefix-list IP1
!
route-map ADV-MAP permit 20
match community DC-ROUTES
!
route-map EXIST-MAP permit 10
match community DEFAULT-ROUTE
match ip address prefix-list DEFAULT-ROUTE
!
line vty
!
end
Router2#
Router2# show ip bgp 0.0.0.0
BGP routing table entry for 0.0.0.0/0
Paths: (1 available, best #1, table default)
Advertised to non peer-group peers:
10.10.10.1 10.10.20.3
1
10.10.10.1 from 10.10.10.1 (10.139.224.1)
Origin IGP, metric 0, valid, external, best (First path received)
Community: 64848:3011 65011:200 65013:200
Last update: Tue Oct 6 02:39:42 2020
Router2#
Sample output with non-exist-map when default route present in table
--------------------------------------------------------------------
Router2# show ip bgp
BGP table version is 4, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 0.0.0.0/0 10.10.10.1 0 0 1 i
*> 1.1.1.1/32 10.10.10.1 0 0 1 i
*> 1.1.1.5/32 10.10.10.1 0 0 1 i
*> 10.139.224.0/20 10.10.10.1 0 0 1 ?
Displayed 4 routes and 4 total paths
Router2# show ip bgp neighbors 10.10.20.3 advertised-routes
BGP table version is 4, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 0.0.0.0/0 0.0.0.0 0 1 i
*> 1.1.1.5/32 0.0.0.0 0 1 i <<<<<<<<< non-exist-map : 0.0.0.0/0 is present so, 10.139.224.0/20 not advertised
Total number of prefixes 2
Sample output with non-exist-map when default route not present in table
------------------------------------------------------------------------
Router2# show ip bgp
BGP table version is 5, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.1/32 10.10.10.1 0 0 1 i
*> 1.1.1.5/32 10.10.10.1 0 0 1 i
*> 10.139.224.0/20 10.10.10.1 0 0 1 ?
Displayed 3 routes and 3 total paths
Router2#
Router2#
Router2# show ip bgp neighbors 10.10.20.3 advertised-routes
BGP table version is 5, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.1/32 0.0.0.0 0 1 i
*> 1.1.1.5/32 0.0.0.0 0 1 i
*> 10.139.224.0/20 0.0.0.0 0 1 ? <<<<<<<<< non-exist-map : 0.0.0.0/0 is not present so, 10.139.224.0/20 advertised
Total number of prefixes 3
Router2#
Sample output with exist-map when default route present in table
--------------------------------------------------------------------
Router2# show ip bgp
BGP table version is 8, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 0.0.0.0/0 10.10.10.1 0 0 1 i
*> 1.1.1.1/32 10.10.10.1 0 0 1 i
*> 1.1.1.5/32 10.10.10.1 0 0 1 i
*> 10.139.224.0/20 10.10.10.1 0 0 1 ?
Displayed 4 routes and 4 total paths
Router2#
Router2#
Router2#
Router2#
Router2# show ip bgp neighbors 10.10.20.3 advertised-routes
BGP table version is 8, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 0.0.0.0/0 0.0.0.0 0 1 i
*> 1.1.1.1/32 0.0.0.0 0 1 i
*> 1.1.1.5/32 0.0.0.0 0 1 i
*> 10.139.224.0/20 0.0.0.0 0 1 ? <<<<<<<<< exist-map : 0.0.0.0/0 is present so, 10.139.224.0/20 advertised
Total number of prefixes 4
Router2#
Sample output with exist-map when default route not present in table
--------------------------------------------------------------------
Router2# show ip bgp
BGP table version is 9, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.1/32 10.10.10.1 0 0 1 i
*> 1.1.1.5/32 10.10.10.1 0 0 1 i
*> 10.139.224.0/20 10.10.10.1 0 0 1 ?
Displayed 3 routes and 3 total paths
Router2#
Router2#
Router2#
Router2# show ip bgp neighbors 10.10.20.3 advertised-routes
BGP table version is 9, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.5/32 0.0.0.0 0 1 i <<<<<<<<< exist-map : 0.0.0.0/0 is not present so, 10.139.224.0/20 not advertised
Total number of prefixes 1
Router2#
Signed-off-by: Madhuri Kuruganti <k.madhuri@samsung.com>
Sample configuration along with route-map filter
------------------------------------------------
Router2# show running-config
Building configuration...
Current configuration:
!
frr version 7.6-dev-MyOwnFRRVersion
frr defaults traditional
hostname router
log file /var/log/frr/bgpd.log
log syslog informational
hostname Router2
service integrated-vtysh-config
!
debug bgp updates in
debug bgp updates out
!
debug route-map
!
ip route 200.200.0.0/16 blackhole
ipv6 route 2001:db8::200/128 blackhole
!
interface enp0s9
ip address 10.10.10.2/24
!
interface enp0s10
ip address 10.10.20.2/24
!
interface lo
ip address 2.2.2.2/24
ipv6 address 2001:db8::2/128
!
router bgp 2
bgp log-neighbor-changes
no bgp ebgp-requires-policy
neighbor 10.10.10.1 remote-as 1
neighbor 10.10.20.3 remote-as 3
!
address-family ipv4 unicast
network 2.2.2.0/24
network 200.200.0.0/16
neighbor 10.10.10.1 soft-reconfiguration inbound
neighbor 10.10.10.1 route-map RMAP_PERMIT_100 out
neighbor 10.10.10.1 advertise-map ADVERTISE non-exist-map CONDITION
neighbor 10.10.20.3 soft-reconfiguration inbound
exit-address-family
!
address-family ipv6 unicast
network 2001:db8::2/128
network 2001:db8::200/128
neighbor 10.10.10.1 activate
neighbor 10.10.10.1 soft-reconfiguration inbound
neighbor 10.10.10.1 route-map CONDITION_6 out
neighbor 10.10.10.1 advertise-map ADVERTISE_6 non-exist-map CONDITION_6
neighbor 10.10.20.3 activate
neighbor 10.10.20.3 soft-reconfiguration inbound
exit-address-family
!
access-list CONDITION seq 5 permit 3.3.3.0/24
access-list ADVERTISE seq 6 permit 200.200.0.0/16
access-list ADVERTISE seq 7 permit 20.20.0.0/16
access-list ADVERTISE seq 5 permit 2.2.2.0/24
access-list RMAP_PERMIT_100 seq 4 permit 100.100.0.0/16
!
ipv6 access-list ADVERTISE_6 seq 5 permit 2001:db8::2/128
ipv6 access-list CONDITION_6 seq 5 permit 2001:db8::3/128
!
route-map ADVERTISE permit 10
match ip address ADVERTISE
!
route-map CONDITION permit 10
match ip address CONDITION
!
route-map ADVERTISE_6 permit 10
match ipv6 address ADVERTISE_6
!
route-map CONDITION_6 permit 10
match ipv6 address CONDITION_6
!
route-map RMAP_PERMIT_100 permit 10
match ip address RMAP_PERMIT_100
!
line vty
!
end
Sample output when non-exist-map prefixes present in BGP table
--------------------------------------------------------------
Router2# show ip bgp all wide
For address family: IPv4 Unicast
BGP table version is 5, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.0/24 10.10.10.1 0 0 1 i
*> 2.2.2.0/24 0.0.0.0 0 32768 i
*> 3.3.3.0/24 10.10.20.3 0 0 3 i
*> 100.100.0.0/16 10.10.20.3 0 0 3 i
*> 200.200.0.0/16 0.0.0.0 0 32768 i
Displayed 5 routes and 5 total paths
For address family: IPv6 Unicast
BGP table version is 4, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 2001:db8::1/128 fe80::a00:27ff:fecb:ad57 0 0 1 i
*> 2001:db8::2/128 :: 0 32768 i
*> 2001:db8::3/128 fe80::a00:27ff:fe76:6738 0 0 3 i
*> 2001:db8::200/128 :: 0 32768 i
Displayed 4 routes and 4 total paths
Router2#
Router2#
Router2#
Router2#
Router2# show ip bgp all neighbors 10.10.10.1 advertised-routes wide
For address family: IPv4 Unicast
BGP table version is 5, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 100.100.0.0/16 0.0.0.0 0 3 i
Total number of prefixes 1
For address family: IPv6 Unicast
BGP table version is 4, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 2001:db8::3/128 :: 0 3 i
Total number of prefixes 1
Router2#
Sample output when non-exist-map prefixes not present in BGP table
------------------------------------------------------------------
Router2# show ip bgp all wide
For address family: IPv4 Unicast
BGP table version is 6, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.0/24 10.10.10.1 0 0 1 i
*> 2.2.2.0/24 0.0.0.0 0 32768 i
*> 100.100.0.0/16 10.10.20.3 0 0 3 i
*> 200.200.0.0/16 0.0.0.0 0 32768 i
Displayed 4 routes and 4 total paths
For address family: IPv6 Unicast
BGP table version is 5, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 2001:db8::1/128 fe80::a00:27ff:fecb:ad57 0 0 1 i
*> 2001:db8::2/128 :: 0 32768 i
*> 2001:db8::200/128 :: 0 32768 i
Displayed 3 routes and 3 total paths
Router2#
Router2# show ip bgp all neighbors 10.10.10.1 advertised-routes wide
For address family: IPv4 Unicast
BGP table version is 6, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 2.2.2.0/24 0.0.0.0 0 32768 i
*> 100.100.0.0/16 0.0.0.0 0 3 i
*> 200.200.0.0/16 0.0.0.0 0 32768 i
Total number of prefixes 3
For address family: IPv6 Unicast
BGP table version is 5, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 2001:db8::2/128 :: 0 32768 i
Total number of prefixes 1
Router2#
Signed-off-by: Madhuri Kuruganti <k.madhuri@samsung.com>
Implemented as per the feature description given in the source link.
Descriprion:
The BGP conditional advertisement feature uses the non-exist-map or exist-map
and the advertise-map keywords of the neighbor advertise-map command in order
to track routes by the route prefix.
non-exist-map :
If a route prefix is not present in output of the non-exist-map command, then
the route specified by the advertise-map command is announced.
exist-map :
If a route prefix is present in output of the exist-map command, then the route
specified by the advertise-map command is announced.
The conditional BGP announcements are sent in addition to the normal
announcements that a BGP router sends to its peers.
The conditional advertisement process is triggered by the BGP scanner process,
which runs every 60 seconds. This means that the maximum time for the conditional
advertisement to take effect is 60 seconds. The conditional advertisement can take
effect sooner, depending on when the tracked route is removed from the BGP table
and when the next instance of the BGP scanner occurs.
Sample Configuration on DUT
---------------------------
Router2# show running-config
Building configuration...
Current configuration:
!
frr version 7.6-dev-MyOwnFRRVersion
frr defaults traditional
hostname router
log file /var/log/frr/bgpd.log
log syslog informational
hostname Router2
service integrated-vtysh-config
!
debug bgp updates in
debug bgp updates out
!
debug route-map
!
ip route 200.200.0.0/16 blackhole
ipv6 route 2001:db8::200/128 blackhole
!
interface enp0s9
ip address 10.10.10.2/24
!
interface enp0s10
ip address 10.10.20.2/24
!
interface lo
ip address 2.2.2.2/24
ipv6 address 2001:db8::2/128
!
router bgp 2
bgp log-neighbor-changes
no bgp ebgp-requires-policy
neighbor 10.10.10.1 remote-as 1
neighbor 10.10.20.3 remote-as 3
!
address-family ipv4 unicast
network 2.2.2.0/24
network 200.200.0.0/16
neighbor 10.10.10.1 soft-reconfiguration inbound
neighbor 10.10.10.1 advertise-map ADVERTISE non-exist-map CONDITION
neighbor 10.10.20.3 soft-reconfiguration inbound
exit-address-family
!
address-family ipv6 unicast
network 2001:db8::2/128
network 2001:db8::200/128
neighbor 10.10.10.1 activate
neighbor 10.10.10.1 soft-reconfiguration inbound
neighbor 10.10.10.1 advertise-map ADVERTISE_6 non-exist-map CONDITION_6
neighbor 10.10.20.3 activate
neighbor 10.10.20.3 soft-reconfiguration inbound
exit-address-family
!
access-list CONDITION seq 5 permit 3.3.3.0/24
access-list ADVERTISE seq 5 permit 2.2.2.0/24
access-list ADVERTISE seq 6 permit 200.200.0.0/16
access-list ADVERTISE seq 7 permit 20.20.0.0/16
!
ipv6 access-list ADVERTISE_6 seq 5 permit 2001:db8::2/128
ipv6 access-list CONDITION_6 seq 5 permit 2001:db8::3/128
!
route-map ADVERTISE permit 10
match ip address ADVERTISE
!
route-map CONDITION permit 10
match ip address CONDITION
!
route-map ADVERTISE_6 permit 10
match ipv6 address ADVERTISE_6
!
route-map CONDITION_6 permit 10
match ipv6 address CONDITION_6
!
line vty
!
end
Router2#
Withdraw when non-exist-map prefixes present in BGP table:
----------------------------------------------------------
Router2# show ip bgp all wide
For address family: IPv4 Unicast
BGP table version is 8, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.0/24 10.10.10.1 0 0 1 i
*> 2.2.2.0/24 0.0.0.0 0 32768 i
*> 3.3.3.0/24 10.10.20.3 0 0 3 i
*> 200.200.0.0/16 0.0.0.0 0 32768 i
Displayed 4 routes and 4 total paths
For address family: IPv6 Unicast
BGP table version is 8, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 2001:db8::1/128 fe80::a00:27ff:fecb:ad57 0 0 1 i
*> 2001:db8::2/128 :: 0 32768 i
*> 2001:db8::3/128 fe80::a00:27ff:fe76:6738 0 0 3 i
*> 2001:db8::200/128 :: 0 32768 i
Displayed 4 routes and 4 total paths
Router2#
Router2# show ip bgp neighbors 10.10.10.1
BGP neighbor is 10.10.10.1, remote AS 1, local AS 2, external link
!--- Output suppressed.
For address family: IPv4 Unicast
Update group 9, subgroup 5
Packet Queue length 0
Inbound soft reconfiguration allowed
Community attribute sent to this neighbor(all)
Condition NON_EXIST, Condition-map *CONDITION, Advertise-map *ADVERTISE, status: Withdraw
1 accepted prefixes
For address family: IPv6 Unicast
Update group 10, subgroup 6
Packet Queue length 0
Inbound soft reconfiguration allowed
Community attribute sent to this neighbor(all)
Condition NON_EXIST, Condition-map *CONDITION_6, Advertise-map *ADVERTISE_6, status: Withdraw
1 accepted prefixes
!--- Output suppressed.
Router2#
Here 2.2.2.0/24 & 200.200.0.0/16 (prefixes in advertise-map) are withdrawn
by conditional advertisement scanner as the prefix(3.3.3.0/24) specified
by non-exist-map is present in BGP table.
Router2# show ip bgp all neighbors 10.10.10.1 advertised-routes wide
For address family: IPv4 Unicast
BGP table version is 8, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.0/24 0.0.0.0 0 1 i
*> 3.3.3.0/24 0.0.0.0 0 3 i
Total number of prefixes 2
For address family: IPv6 Unicast
BGP table version is 8, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 2001:db8::1/128 :: 0 1 i
*> 2001:db8::3/128 :: 0 3 i
*> 2001:db8::200/128 :: 0 32768 i
Total number of prefixes 3
Router2#
Advertise when non-exist-map prefixes not present in BGP table:
---------------------------------------------------------------
After Removing 3.3.3.0/24 (prefix present in non-exist-map),
2.2.2.0/24 & 200.200.0.0/16 (prefixes present in advertise-map) are advertised
Router2# show ip bgp all wide
For address family: IPv4 Unicast
BGP table version is 9, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.0/24 10.10.10.1 0 0 1 i
*> 2.2.2.0/24 0.0.0.0 0 32768 i
*> 200.200.0.0/16 0.0.0.0 0 32768 i
Displayed 3 routes and 3 total paths
For address family: IPv6 Unicast
BGP table version is 9, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 2001:db8::1/128 fe80::a00:27ff:fecb:ad57 0 0 1 i
*> 2001:db8::2/128 :: 0 32768 i
*> 2001:db8::200/128 :: 0 32768 i
Displayed 3 routes and 3 total paths
Router2#
Router2# show ip bgp neighbors 10.10.10.1
!--- Output suppressed.
For address family: IPv4 Unicast
Update group 9, subgroup 5
Packet Queue length 0
Inbound soft reconfiguration allowed
Community attribute sent to this neighbor(all)
Condition NON_EXIST, Condition-map *CONDITION, Advertise-map *ADVERTISE, status: Advertise
1 accepted prefixes
For address family: IPv6 Unicast
Update group 10, subgroup 6
Packet Queue length 0
Inbound soft reconfiguration allowed
Community attribute sent to this neighbor(all)
Condition NON_EXIST, Condition-map *CONDITION_6, Advertise-map *ADVERTISE_6, status: Advertise
1 accepted prefixes
!--- Output suppressed.
Router2#
Router2# show ip bgp all neighbors 10.10.10.1 advertised-routes wide
For address family: IPv4 Unicast
BGP table version is 9, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.0/24 0.0.0.0 0 1 i
*> 2.2.2.0/24 0.0.0.0 0 32768 i
*> 200.200.0.0/16 0.0.0.0 0 32768 i
Total number of prefixes 3
For address family: IPv6 Unicast
BGP table version is 9, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 2001:db8::1/128 :: 0 1 i
*> 2001:db8::2/128 :: 0 32768 i
*> 2001:db8::200/128 :: 0 32768 i
Total number of prefixes 3
Router2#
Signed-off-by: Madhuri Kuruganti <k.madhuri@samsung.com>
==916511== 18 bytes in 2 blocks are definitely lost in loss record 7 of 147
==916511== at 0x483877F: malloc (vg_replace_malloc.c:307)
==916511== by 0x4BE0F0A: strdup (strdup.c:42)
==916511== by 0x48D66CE: qstrdup (memory.c:122)
==916511== by 0x1E6E31: bgp_vpn_leak_export (bgp_mplsvpn.c:2690)
==916511== by 0x28E892: bgp_router_create (bgp_nb_config.c:124)
==916511== by 0x48E05AB: nb_callback_create (northbound.c:869)
==916511== by 0x48E0FA2: nb_callback_configuration (northbound.c:1183)
==916511== by 0x48E13D0: nb_transaction_process (northbound.c:1308)
==916511== by 0x48E0137: nb_candidate_commit_apply (northbound.c:741)
==916511== by 0x48E024B: nb_candidate_commit (northbound.c:773)
==916511== by 0x48E6B21: nb_cli_classic_commit (northbound_cli.c:64)
==916511== by 0x48E757E: nb_cli_apply_changes (northbound_cli.c:281)
Signed-off-by: Chirag Shah <chirag@nvidia.com>
json_array_string_add is used to add a string entry into a JSON
list. This API is needed by zebra so moving it from bgpd to lib.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
DF (Designated forwarder) election is used for picking a single
BUM-traffic forwarded per-ES. RFC7432 specifies a mechanism called
service carving for DF election. However that mechanism has many
disadvantages -
1. LBs poorly.
2. Doesn't allow for a controlled failover needed in upgrade
scenarios.
3. Not easy to hw accelerate.
To fix the poor performance of service carving alternate DF mechanisms
have been proposed via the following drafts -
draft-ietf-bess-evpn-df-election-framework
draft-ietf-bess-evpn-pref-df
This commit adds support for the pref-df election mechanism which
is used as the default. Other mechanisms including service-carving
may be added later.
In this mechanism one switch on an ES is elected as DF based on the
preference value; higher preference wins with IP address acting
as the tie-breaker (lower-IP wins if pref value is the same).
Sample output
=============
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
torm-11# sh bgp l2vpn evpn es 03:00:00:00:00:01:11:00:00:01
ESI: 03:00:00:00:00:01:11:00:00:01
Type: LR
RD: 27.0.0.15:6
Originator-IP: 27.0.0.15
Local ES DF preference: 100
VNI Count: 10
Remote VNI Count: 10
Inconsistent VNI VTEP Count: 0
Inconsistencies: -
VTEPs:
27.0.0.16 flags: EA df_alg: preference df_pref: 32767
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
torm-11# sh bgp l2vpn evpn route esi 03:00:00:00:00:01:11:00:00:01
*> [4]:[03:00:00:00:00:01:11:00:00:01]:[32]:[27.0.0.15]
27.0.0.15 32768 i
ET:8 ES-Import-Rt:00:00:00:00:01:11 DF: (alg: 2, pref: 100)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Convert IPv4 and IPv6 unicast address family clis
to transactional clis and implementation of
northbound callbacks.
Signed-off-by: Chirag Shah <chirag@nvidia.com>
When compiling w/ --enable-bfdd=no we get warnings
about functions not being used.
Add a #if check to include it as needed.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Problem found that turning an update-delay would only delay prefixes
learned from peers by delaying bestpath, but would allow local routes
(network statements or redistributed) to be immediately advertised,
followed by an End of Rib indicator. This fix delays sending local
routes until the update-delay process is completed, which matches
what testing shows other vendors do..
Ticket: CM-31743
Signed-off-by: Don Slice <dslice@nvidia.com>
- tracepoint() -> frrtrace()
- tracelog() -> frrtracelog()
- tracepoint_enabled() -> frrtrace_enabled()
Also removes copypasta'd #ifdefs for those LTTng macros, those are
handled in lib/trace.h
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
Replace all lib/thread cancel macros, use thread_cancel()
everywhere. Only the THREAD_OFF macro and thread_cancel() api are
supported. Also adjust thread_cancel_async() to NULL caller's pointer (if
present).
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Change thread_cancel to take a ** to an event, NULL-check
before dereferencing, and NULL the caller's pointer. Update
many callers to use the new signature.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Instead of just counting the route suppressions, keep a reference for
all aggregations that are doing it. It should help the with the
following problems:
- Which aggregation suppressed the route.
- Double suppression
- Double unsuppression
- Avoids calling `bgp_process` if already suppressed/unsuppressed.
- Easier code maintenance and understanding
This also fixes a crash when modifying a route map that is
associated with a working aggregate-address.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Add new aggregate-address option to selectively suppress routes based
on route map results.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
We currently have a global process queue for handling route
updates in bgp. This is fine, in general, except there are
places and times where we plug the queue for no new work
during certain peer states of bgp update delay. If we
happen to be processing multiple bgp instances on startup
why do we want to stop processing in vrf A when vrf B
is in a bit of a pickle?
Also this separation will allow us to start forward thinking
about how to fully integrate pthreads into route processing
in bgp.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The MH datastructures were being released before the paths that were
referencing them. Fix is to do the MH cleanup last.
The MH finish function has also been stripped down to only do a
datastructure cleanup i.e. avoid sending route updates etc.
Ticket: 31376
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Create appropriate accessor functions for the rn->lock
data. We should be accessing this data through accessor
functions since it is private data to the data structure.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Some more of the bgp_node usage snuck in from big commits in
the past month or so from feature work. Do some work
to put it back to bgp_dest for incoming future work.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
