- Fix 1 byte overflow when showing GR info in bgpd
- Use PATH_MAX for path buffers
- Use unsigned specifiers for uint16_t's in zebra pbr
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Replace sprintf with snprintf where straightforward to do so.
- sprintf's into local scope buffers of known size are replaced with the
equivalent snprintf call
- snprintf's into local scope buffers of known size that use the buffer
size expression now use sizeof(buffer)
- sprintf(buf + strlen(buf), ...) replaced with snprintf() into temp
buffer followed by strlcat
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
And again for the name. Why on earth would we centralize this, just so
people can forget to update it?
Signed-off-by: David Lamparter <equinox@diac24.net>
Same as before, instead of shoving this into a big central list we can
just put the parent node in cmd_node.
Signed-off-by: David Lamparter <equinox@diac24.net>
There is really no reason to not put this in the cmd_node.
And while we're add it, rename from pointless ".func" to ".config_write".
[v2: fix forgotten ldpd config_write]
Signed-off-by: David Lamparter <equinox@diac24.net>
The only nodes that have this as 0 don't have a "->func" anyway, so the
entire thing is really just pointless.
Signed-off-by: David Lamparter <equinox@diac24.net>
Some competitive vendors like Cisco, Bird, OpenBGPD,
Nokia already have this by default enabled.
The list is here: https://github.com/bgp/RFC8212
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
... Oops ...
(for context, the defaults code originally didn't have a dedicated
"bool" variant and just used long for bools... I derp'd this when
adding bool as a separate case :( )
Reported-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@diac24.net>
This macro is undefined if vnc is disabled, and while it defaults to 0,
this is still wrong and causes issues with -Werror
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Support configurable options to control how link bandwidth is handled
by the receiver. The default behavior is to automatically honor the
link bandwidths received and use it to perform a weighted ECMP BUT only
if all paths in the multipath have associated link bandwidth; if one or
more paths do not have link bandwidth, normal ECMP is performed among
the multipaths. This behavior is as recommended by
https://tools.ietf.org/html/draft-ietf-idr-link-bandwidth.
The additional options available are to (a) completely ignore any link
bandwidth (i.e., weighted ECMP is effectively disabled), (b) skip paths
in the multipath which do not have link bandwidth and perform weighted
ECMP among the other paths (if at least some paths have the bandwidth)
or (c) use a default weight (value chosen is 1) for the paths which
do not have link bandwidth.
The command syntax is
bgp bestpath bandwidth <ignore|skip-missing|default-weight-for-missing>
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
In the past, we always displayed the number of buffered ingress packets
as zero because there was no packet buffering in the input path and
therefore never any queue size to report. They're buffered now so we can
display something meaningful instead of 0.
Also change the inq / outq lookups to be atomic, since they can be
modified elsewhere. These should still compile down to an unfenced word
read but it's good to be explicit.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Add new function `bgp_node_get_prefix()` and modify
the bgp code base to use it.
This is prep work for the struct bgp_dest rework.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problem seen that if "import vrf route-map RMAP" was entered
without any vrfs being imported, the configuration was displayed
as "route-map vpn import RMAP". Additionally, if "import vrf
route-map" was entered without specifying a route-map name,
the command was accepted and the word "route-map" would be
treated as a vrf name. This fix resolves both of those issues
and also allows deleting the "import vrf route-map" line without
providing the route-map name.
Ticket: CM-28821
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Some were converted to bool, where true/false status is needed.
Converted to void only those, where the return status was only false or true.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
RCA: When doppelganger still around and clear bgp is issued
there are chances of peer getting deleted and next pointer
is a freed peer pointer.
Fix: Pass address of nnode to get next safe peer pointer.
Signed-off-by: Santosh P K <sapk@vmware.com>
annie# show bgp ipv4 uni summ
BGP router identifier 192.168.201.136, local AS number 64539 vrf-id 0
BGP table version 22458946
RIB entries 1458006, using 178 MiB of memory
Peers 4, using 68 KiB of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
45.33.5.119 4 0 0 0 0 0 0 never Active
65.19.134.122 4 15096 4611832 108292 0 0 0 6d22h55m 800670
107.13.46.23 4 0 0 0 0 0 0 never Connect
robot(192.168.201.139) 4 64540 11159975 11365599 0 0 0 05w2d05h Connect
Total number of neighbors 4
On very busy systems The column output for MsgRcvd and MsgSent can quickly move past 7 columns.
Add a couple more to allow for even display.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There is no need for a call into get_afi_safi_str for the
json side since we add it based upon the afi safi str below.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If you have enums handled in a switch adding a default case
makes it fun to fix when new stuff is added later. Remove.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* Added CLI commands to update rib-stale-time, running in
Cmd : "bgp gaceful-restart rib-stale-time (1-3000)".
Cmd : "no bgp gaceful-restart rib-stale-time".
* Integrating the hooks function for signalling from BGPD
to ZEBRA to ZEBRA to enable or disable GR feature in ZEBRA
depending on bgp per peer gr configuration.
Signed-off-by: Biswajit Sadhu <sadhub@vmware.com>
*After a restarting router comes up and the bgp session is
successfully established with the peer. If the restarting
router doesn’t have any route to send, it send EOR to
the peer immediately before receiving updates from its peers.
*Instead the restarting router should send EOR, if the
selection deferral timer is not running OR count of eor received
and eor required are matches then send EOR.
Signed-off-by: Biswajit Sadhu <sadhub@vmware.com>
BGP disable EOR sending is a useful command for testing various
scenarios of BGP graceful restart.
* Added the hidden CLI command : bgp graceful-restart disable-eor
* The CLI will not be displayed in "show running-config" and will not
be stored in configuration file.
* When enabled, EOR will not be sent to peer
Signed-off-by: Biswajit Sadhu <sadhub@vmware.com>
Signed-off-by: Soman K S <somanks@vmware.com>
BGP GR Neighbor mode is showing the default string as “NotRecieved”,
as the bgp gr neighbour capability was not processed,
since the local mode is “Disable”.
However now it would be changed to “NotApplicable”.
Signed-off-by: Biswajit Sadhu <sadhub@vmware.com>
* Changing GR mode on a router needs a session reset from the
SAME router to negotiate new GR capability.
* The present GR implementation needs a session reset after every
new BGP GR mode change.
* When BGP session reset happens due to sending or receiving BGP
notification after changing BGP GR mode, there is no need of
explicit session reset.
Signed-off-by: Biswajit Sadhu <sadhub@vmware.com>
* BGP GR Neighbour mode in show command would show as
“NotApplicable”, when local mode is “Disable”. As the bgp
gr neighbour capability was not processed, since the local mode
is “Disable”.
* Minor changes in show Selection Deferral Time.
Signed-off-by: Biswajit Sadhu <sadhub@vmware.com>
* Selection Deferral Timer for Graceful Restart.
* Added selection deferral timer handling function.
* Route marking as selection defer when update message is received.
* Staggered processing of routes which are pending best selection.
* Fix for multi-path test case.
Signed-off-by: Biswajit Sadhu <sadhub@vmware.com>
and DS.
* Added config commands and data structures for deferral timer
configuration and processing.
Cmd : bgp graceful-restart select-defer-time (0-3600)
Cmd : no bgp graceful-restart select-defertime (0-3600)
Signed-off-by: Biswajit Sadhu <sadhub@vmware.com>
Signed-off-by: Soman K S <somanks@vmware.com>
* Added new show command to show the graceful restart
information for each neighbor.
Cmd: show bgp [<ipv4|ipv6>] neighbors [<A.B.C.D|X:X::X:X|WORD>] graceful-restart
* Changes to show neighbors commands for displaying
graceful restart information.
Cmd :show [ip] bgp [<view|vrf> VIEWVRFNAME] [<ipv4|ipv6>] neighbors [<A.B.C.D|X:X::X:X|
Signed-off-by: Biswajit Sadhu <sadhub@vmware.com>
It's quite confusing when you see this:
```
exit1-debian-9(config-router)# bgp listen
listen Configure BGP defaults
```
And:
```
exit1-debian-9(config-router)# no bgp listen
listen unset maximum number of BGP Dynamic Neighbors that can be created
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Fixes:
```
exit1-debian-9(config-router)# no bgp listen range 192.168.10.0/24 peer-group TEST
% Peer-group does not exist
exit1-debian-9(config-router)#
```
Closes https://github.com/FRRouting/frr/issues/5570
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
This moves all the DFLT_BGP_* stuff over to the new defaults mechanism.
bgp_timers_nondefault() added to get better file-scoping.
v2: moved everything into bgp_vty.c so that the core BGP code is
independent of the CLI-specific defaults. This should make the future
northbound conversion easier.
Signed-off-by: David Lamparter <equinox@diac24.net>
There's no good reason to have this in bgpd.c; it's just there
historically. Move it to bgp_vty.c where it makes more sense.
Signed-off-by: David Lamparter <equinox@diac24.net>
Without with fix we can't delete large-community-list using
no bgp large-community-list standard WORD, but no bgp large-community-list WORD
Let's keep this identical what we have with expanded lists as well.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
This patch allows using sequence numbers for community lists. We already have
this for prefix-lists and access-lists.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
The sender side AS path loop detection code was implemented since the
import of Quagga code, however it was always disabled by a `ifdef`
guard.
Lets allow the user to decide whether or not to enable this feature on
run-time.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Problem reported with error messages appearing in the log
complaining about invalid afi/safi combinations. Determined
that the error messages were recently added in the function
that turns afi and safi values to strings. Unfortunately,
the function is called from places using FOREACH_AFI_SAFI,
which spins thru every afi and safi number including some
that are not legal together (ipv4 evpn and l2vpn multicast
for example.) This fix removes these error messages since
it is not necessarily an error to call it with invalid
combinations.
Ticket: CM-26883
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
There was a silly bug introduced when the command to show failed sessions
was added. A missing "," caused the wrong error message to be printed.
Debugging this led down a path that:
- Led to discovering one more error message that needed to be added
- Providing the error code along with the string in the JSON output
to allow programs to key off numbers rather than strings.
- Fixing the missing ","
- Changing the error message to "Waiting for Peer IPv6 LLA" to
make it clear that we're waiting for the link local addr.
Signed-off-by: Dinesh G Dutt <5016467+ddutt@users.noreply.github.com>
Based on a suggestion by Donald Sharp, this patch adds the counts of the
number of times a BGP peering session has transitioned from Estd->NotEstd
and from NotEstd->Estd to the JSON output only of the
"show [ip] bgp [vrf <vrf>] summary" command. The idea is that even if the
current session is well and up, but a sessions has trasnitionined in and
out of Estd state multiple times, its worth noting that. We cannot change
the non-JSON output as easily, and so this command only addresses the JSON
part for now. The fields added are the ones that were provided only as part
of the "show bgp neighbor" command.
Signed-off-by: Dinesh G Dutt <5016467+ddutt@users.noreply.github.com>
In a data center, having 32-128 peers is not uncommon. In such a situation, to find a
peer that has failed and why is several commands. This hinders both the automatability of
failure detection and the ease/speed with which the reason can be found. To simplify this
process of catching a failure and its cause quicker, this patch does the following:
1. Created a new function, bgp_show_failed_summary to display the
failed summary output for JSON and vty
2. Created a new function to display the reset code/subcode. This is now used in the
failed summary code and in the show neighbors code
3. Added a new variable failedPeers in all the JSON outputs, including the vanilla
"show bgp summary" family. This lists the failed session count.
4. Display peer, dropped count, estd count, uptime and the reason for failure as the
output of "show bgp summary failed" family of commands
5. Added three resset codes for the case where we're waiting for NHT, waiting for peer
IPv6 addr, waiting for VRF to init.
This also counts the case where only one peer has advertised an AFI/SAFI.
The new command has the optional keyword "failed" added to the classical summary command.
The changes affect only one existing output, that of "show [ip] bgp neighbors <nbr>". As
we track the lack of NHT resolution for a peer or the lack of knowing a peer IPv6 addr,
the output of that command will show a "waiting for NHT" etc. as the last reset reason.
This patch includes update to the documentation too.
Signed-off-by: Dinesh G Dutt <5016467+ddutt@users.noreply.github.com>
In a number of places, the JSON output had invalid key names for
AFI/SAFI. For example, the key name in JSON was "IPv4 Unicast" which
is invalid as a JSON Key name. Many JSON tools such as those used in
Ansible, jq etc. all fail to parse the output in these scenarios. The
valid name is ipv4Unicast. There's already a routine afi_safi_json()
defined to handle this change, but it was not consistently called.
The non-JSON version was called afi_safi_print() and it merely returned
the CLI version of the string, didn't print anything.
This patch deals with this issue by:
- Renaming afi_safi_print to get_afi_safi_str()
- get_afi_safi_str takes an additional param, for_json which if true
will return the JSON-valid string
- Renaming afi_safi_json to get_afi_safi_json_str()
- Creating a new routine get_afi_safi_vty_str() for printing to vty
- Consistently using get_afi_safi_str() with the appropriate for_json
value
Signed-off-by: Dinesh G Dutt <5016467+ddutt@users.noreply.github.com>
When user wants to dump individual large-community-list with the name
then bgp throws an error. It is due to command to dump the bgp RIB routes
having a particular large-community-list values. To segregate both the
commands this fix has added the detail keyword in the below command.
show bgp large-community-list <(1-500)|WORD> detail
The same code change is applicable for community-list also.
Signed-off-by: vishaldhingra<vdhingra@vmware.com>
Problem reported that "clear bgp *" only cleared ipv6 peers.
Changed the logic to clear all afi/safis of all peers in
that case. Also improved the operation of clearing
individual afi/safi using soft/in/out to do the right thing.
Ticket: CM-25887
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Debian packaging when run finds a bunch of spelling errors:
I: frr: spelling-error-in-binary usr/bin/vtysh occurences occurrences
I: frr: spelling-error-in-binary usr/lib/frr/bfdd Amount of times Number of times
I: frr: spelling-error-in-binary usr/lib/frr/bgpd occurences occurrences
I: frr: spelling-error-in-binary usr/lib/frr/bgpd recieved received
I: frr: spelling-error-in-binary usr/lib/frr/isisd betweeen between
I: frr: spelling-error-in-binary usr/lib/frr/ospf6d Infomation Information
I: frr: spelling-error-in-binary usr/lib/frr/ospfd missmatch mismatch
I: frr: spelling-error-in-binary usr/lib/frr/pimd bootsrap bootstrap
I: frr: spelling-error-in-binary usr/lib/frr/pimd Unknwon Unknown
I: frr: spelling-error-in-binary usr/lib/frr/zebra Requsted Requested
I: frr: spelling-error-in-binary usr/lib/frr/zebra uknown unknown
I: frr: spelling-error-in-binary usr/lib/x86_64-linux-gnu/frr/libfrr.so.0.0.0 overriden overridden
This commit fixes all of them except the bgp `recieved` issue due to
it being part of json output. That one will need to go through
a deprecation cycle.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
BGP large-communities configuration CLI is successful even if
the command is configured without any attributes.
For ex., the below commands are successful.
1) "bgp large-community-list standard TEST permit"
2) "bgp large-community-list standard TEST deny"
The CLI definitions that allow these erroneous configurations need to be removed.
Signed-off-by: NaveenThanikachalam nthanikachal@vmware.com
Problem reported with memory leak when the command "show bgp vrf all
ipv6 unicast summary json" is issued. Found that the problem only
occurs if the configuration does not actually include the ipv6
address-family but does contain ipv4 unicast peers. If we didn't
match a peer in the address-family being displayed, we would create
the json object but never free it. This fix actually stops creating
the json object in this section of code and lets the create happen
in the area where the match occurs.
Ticket: CM-25616
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Problem reported that if "clear bgp swp1" is issued, an error
message is received saying the name or address is malformed. This
was because of a change in bgp_vty.c that removed the storing
and passing of the interface name for this command. Commit that
caused the problem was ac5dec7e88ce2f8cd2943bb61437046718fb34c2.
Ticket: CM-25737
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
The `no redistribute ...` commands were not allowing
the input to be in any order. Fix code to allow this.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we are issuing a new command:
router bgp
bgp default local-preference ..
-or-
bgp cluster-id ...
-or-
bgp disable-ebgp-connected-route-check
Do not tell them that afi/safi's are not configured. There is nothing
to do with this information and it will create confusion in the
end user that we are looking for afi/safi's that are never going to
be configed.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The `neighbor X:X::X default-originate command is complaining
that:
The route-map '(null)' does not exist.
Upon inspection of the code we were passing a NULL
string to the lookup. Testing for null gets us this:
donna.cumulusnetworks.com# conf t
donna.cumulusnetworks.com(config)# router bgp 99
donna.cumulusnetworks.com(config-router)# neighbor 2001:1::1:2 remote-as 99
donna.cumulusnetworks.com(config-router)# neighbor 2001:1::1:2 default-originate
donna.cumulusnetworks.com(config-router)# end
donna.cumulusnetworks.com# show run
Building configuration...
Current configuration:
!
frr version 7.2-dev
frr defaults datacenter
hostname donna.cumulusnetworks.com
log stdout
no ipv6 forwarding
!
ip route 4.5.6.7/32 10.50.11.4
!
router bgp 99
neighbor 2001:1::1:2 remote-as 99
!
address-family ipv4 unicast
neighbor 2001:1::1:2 default-originate
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This code is not returned anywhere in the system as that bgp
is by default multiple-instance 'only' now. So remove
the last remaining bits of it from the code base.
Remove BGP_ERR_MULTIPLE_INSTANCE_USED too.
Make bgp_get explicitly return BGP_SUCCESS
instead of 0.
Remove the multi-instance error code too.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When a source bgp vrf instance is deleted, ensure the referencing
of it in vrf route leak show commands.
Ticket:CM-20534 CM-24484
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
two bgp vrf instance has vrf route leak configured,
when a source vrf x is deleted, its leaked routes are cleaned
up from the destination and vpn table.
With this change when a source bgp instance is reconfigured,
export its routes back to destination vrfs where it is configured
as leak.
Ticket:CM-20534 CM-24484
Reviewed By:
Testing Done:
configure vrf leak between two vrf intances,
delete and readd source vrf and checked its routes
exported to vpn table and leaked vrfs table.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
A VRF leak is configured between two vrfs,
bgp VRF X and VRF Y.
When a bgp VRF X is removed, unimport bgp VRF X routes
from VPN and VRF Y.
If VRF X is also importing from bgp VRF Y, remove X from
export list of Y and do required route cleanup.
Ticket:CM-20534 CM-24484
Reviewed By:
Testing Done:
Before deleteing vrf1002:
nl1# show ip route vrf vrf1003 9.9.2.4/32
Routing entry for 9.9.2.4/32
Known via "bgp", distance 200, metric 0, vrf vrf1003, best
Last update 00:04:51 ago
* 200.2.8.2, via swp1.2(vrf vrf1002)
* 200.2.9.2, via swp2.2(vrf vrf1002)
* 200.2.10.2, via swp3.2(vrf vrf1002)
Instance vrf1003:
This VRF is importing IPv4 Unicast routes from the following VRFs:
vrf1002
Import RT(s): 6.0.2.9:2
This VRF is exporting IPv4 Unicast routes to the following VRFs:
vrf1002
RD: 6.0.3.9:3
Export RT: 6.0.3.9:3
After deleting vrf1002:
nl1(config)# no router bgp 64902 vrf vrf1002
nl1# show ip route vrf vrf1003 9.9.2.4/32
Routing entry for 9.9.2.4/32
Known via "bgp", distance 20, metric 0, vrf vrf1003, best
Last update 00:00:32 ago
* 200.3.8.2, via swp1.3
* 200.3.9.2, via swp2.3
* 200.3.10.2, via swp3.3
Instance vrf1003:
This VRF is importing IPv4 Unicast routes from the following VRFs:
vrf1002
Import RT(s):
This VRF is not exporting IPv4 Unicast routes to any other VRF
nl1# show bgp ipv4 vpn
No BGP prefixes displayed, 0 exist
Readd vrf1002:
points back to source vrf
nl1# show ip route vrf vrf1003 9.9.2.4/32
Routing entry for 9.9.2.4/32
Known via "bgp", distance 200, metric 0, vrf vrf1003, best
Last update 00:00:21 ago
* 200.2.8.2, via swp1.2(vrf vrf1002)
* 200.2.9.2, via swp2.2(vrf vrf1002)
* 200.2.10.2, via swp3.2(vrf vrf1002)
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
show bgp vrfs command is formatted with couple
of things.
show bgp vrfs to inclue bgp vrf instance's
SVI interface.
Move L3vni, RMAC and SVI value in next line.
Ticket:CM-25317
Reviewed By:CCR-8816
Testing Done:
New Output:
TORS1# show bgp vrfs
Type Id routerId #PeersVfg #PeersEstb Name
L3-VNI RouterMAC Interface
DFLT 0 27.0.0.15 2 2 default
0 00:00:00:00:00:00 unknown
VRF 31 45.0.8.2 0 0 vrf3
4003 00:02:00:00:00:4e vlan4003
VRF 35 45.0.2.2 0 0 vrf1
4001 00:02:00:00:00:4e vlan4001
VRF 25 45.0.6.2 0 0 vrf2
4002 00:02:00:00:00:4e vlan4002
Total number of VRFs (including default): 4
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Problem reported with "clear bgp l2vpn evpn * soft" clearing the
wrong afi/safi (cleared ipv6 unicast instead). Determined that
the calling function used the argv_find_and_parse_afi/safi routines
to determine the correct afi/safi to pass on. Since l2vpn/evpn were
missing from the lookup, the command defaulted to ipv6 unicast. This
fix just adds that afi/safi to the lookup routine.
Ticket: CM-25167
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Since we no-longer allow you to select multiple-instance
or not from the cli, let's completely remove the flag
as well.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When issuing a `show bgp neighbor...` command display to the
end user the FD used for communication.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problem reported with deleting the default BGP instance where there
are vrf instances that depend on it (like l2vpn evpn vrfs). Since
importing for vrf route-leaking also requires the existence of the
default instance, disallowing deleting the BGP default instance if
anyt vrf instance is also defined.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Add an upspecified option to the AFI enum and update
switch statements using it in bgpd and pbrd.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Issue 1:
Getting an empty json without any warning message, while executing
the command "show ip bgp neighbor <x.x.x.x> advertised-routes
json" when the bgp instance is not present or getting created.
Issue 2:
Getting an empty json without any warning message, while executing
the command "show ip bgp vrf/view <name> advertised-routes json"
when the specified view/vrf is not present.
Fix:
Display warning message while executing the above cli commands, when
the bgp instance, specified vrf is not present.
Signed-off-by: Sarita Patra <saritap@vmware.com>
lcommunity_list_show uses the wrong macro to calculate the style.
Use the correct one LARGE_COMMUNITY_LIST_STANDARD.
Signed-off-by: vishaldhingra<vdhingra@vmware.com>
Currently, as part of bgp clear soft inboud and outbound we don't handle
l2vpn evpn. Now clearing soft for all supported afi safi.
One of the examples where this was a problem -
On applying graceful-shutdown, bgp clear soft inboud and outbound don't
handle AFI L2VPN and SAFI EVPN. Gshut gets applied to EVPN Type 5 routes
by asking peer to refresh the routes (provided we have config - "advertise
ipv4/ipv6 unicast" as part of l2vpn evpn) but is not applied to type 2
and type 3 EVP routes. This fix takes care of l2vpn evpn type2 and type3
routes being readvertised with gshut community.
This fix also fixes similar issues related to following where bgp clear
soft is requred for l2vpn evpn -
-config bgp cluster-id
-config bgp client-to-client reflection
-config bgp default local-preference
-config bgp route-reflector allow-outbound-policy
-config bgp disable-ebgp-connected-route-check
Ticket: CM-22813
Signed-off-by: Nitin Soni <nsoni@cumulusnetworks.com>
Reviewed-by: CCR-8361
Testing-Done:
-With gshut configured on all BGP VRFs (operator has to know about the
auto-created BGP VRFs - we do show them in show commands - and turn on
graceful-shutdown in all of them.
-We announce all EVPN routes (type-2, type-3 and type-5) with GSHUT and
we mark IPv4/IPv6 routes in a VRF that are based on received EVPN type-2
or type-5 routes with local pref 0.
-On the receiver side, when EVPN routes are received with GSHUT, the
correct handling takes place (to treat them with local preference 0, and
hence not select them)
-When the gshut configuration is removed on all BGP VRFs, we re-announce
all of our EVPN routes without GSHUT and receiver does the appropriate
thing. Also, we no longer mark EVPN-based IPv4/IPv6 routes with local
pref 0.
-evpn-smoke
-bgp-smoke
VRF Route Leak's
show bgp vrf all ipv4 unicast route-leak
is not supported with `all` keyword.
Testing Done:
bl1# show bgp vrf all ipv4 unicast route-leak
Instance default:
This VRF is not importing IPv4 Unicast routes from any other VRF
This VRF is not exporting IPv4 Unicast routes to any other VRF
Instance vrf3:
This VRF is importing IPv4 Unicast routes from the following VRFs:
vrf1
Import RT(s): 144.1.1.2:10
This VRF is exporting IPv4 Unicast routes to the following VRFs:
vrf1
RD: 144.1.3.2:9
Export RT: 144.1.3.2:9
Instance vrf1:
This VRF is importing IPv4 Unicast routes from the following VRFs:
vrf3
Import RT(s): 144.1.3.2:9
This VRF is exporting IPv4 Unicast routes to the following VRFs:
vrf3
RD: 144.1.1.2:10
Export RT: 144.1.1.2:10
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
The "show bgp ipv6 summary" output displays incorrect number of peers count.
sonic# show bgp ipv6 summary
IPv6 Unicast Summary:
BGP router identifier 10.1.0.1, local AS number 65100 vrf-id 0
BGP table version 0
RIB entries 0, using 0 bytes of memory
Peers 5, using 103 KiB of memory
Peer groups 1, using 64 bytes of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
2003::1 4 65099 0 0 0 0 0 never Active
2088::1 4 65100 0 0 0 0 0 never Active
3021::2 4 65100 0 0 0 0 0 never Active
Total number of neighbors 3
sonic#
In the above output, the peers count displays as 5 but the actual peer count is 3, i.e.. 3 neighbors are activated in ipv6 unicast address family.
Displayed peer count (5) is the number of the neighbors activated in a BGP instance.
Fix : Now the peers count displays the number of neighbors activated per afi/safi.
After Fix:
sonic# show bgp ipv6 summary
IPv6 Unicast Summary:
BGP router identifier 10.1.0.1, local AS number 65100 vrf-id 0
BGP table version 0
RIB entries 0, using 0 bytes of memory
Peers 3, using 62 KiB of memory
Peer groups 1, using 64 bytes of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
2003::1 4 65099 0 0 0 0 0 never Active
2088::1 4 65100 0 0 0 0 0 never Active
3021::2 4 65100 0 0 0 0 0 never Active
Total number of neighbors 3
sonic#
Signed-off-by: Akhilesh Samineni <akhilesh.samineni@broadcom.com>
Found in testing that in a certain sequence, a neighbor's peer-group
membership would be lost. This fix resolves that issue. Additionally
found that "no neighbor swp1 remote-as 2" would sometimes leave the
config with "neighbor swp1 remote-as 0" rather than removing from the
config. That one is also resolved.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Display only ipv4 neighbors when 'show bgp ipv4 neighbors' command is issued.
Display only ipv6 neighbors when 'show bgp ipv6 neighbors' command is issued.
Take the address family of the peer address into account, while displaying the neighbors.
Signed-off-by: Akhilesh Samineni <akhilesh.samineni@broadcom.com>
the maximum value for stalepath timer is extended to 4095 to align with
bgp restart timer value.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
rfc of bgp graceful restart mechanism permits to increase the
restart timer, since its value is encoded on 12 bit.
So make available the possibility to extend it.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
When a interface based peer is setup and if it is part of a peer
group we should ignore this and just use the PEER_FLAG_CAPABILITY_ENHE
no matter what.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
