The if_update function was taking the interface name as
input and reapplying it, using strncpy to reapply the name.
This has several issues. strncpy should not be used
to copy memory in place. The second issue is that
the interface name is not actually changing when we
update interface to be in the new vrf.
Since every usage of if_update was just reapplying the same
name the interface actually had, just remove that part of
the function and rename it to if_update_to_new_vrf
to represent what it is actually doing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The data for each nexthop is stored off of the info
pointer, instead of handling the first one and then looping
over the remaining, just loop over them all and handle the
first one as a special case.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In the bgp code to send routes to zebra we were spending
a non trivial amount of time managing buffer sizes.
We know a priori the multipath supported by our system
so let's just use that value to appropriately size
the buffers.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
- All ipv4 labeled-unicast routes are now installed in the ipv4 unicast
table. This allows us to do things like take routes from an ipv4
unicast peer, allocate a label for them and TX them to a ipv4
labeled-unicast peer. We can do the opposite where we take routes from
a labeled-unicast peer, remove the label and advertise them to an ipv4
unicast peer.
- Multipath over a labeled route and non-labeled route is not allowed.
- You cannot activate a peer for both 'ipv4 unicast' and 'ipv4
labeled-unicast'
- The 'tag' variable was overloaded for zebra's route tag feature as
well as the mpls label. I added a 'mpls_label_t mpls' variable to
avoid this. This is much cleaner but resulted in touching a lot of
code.
This reverts commit fa14eb2c0b.
This was for stable/2.0 and wasn't intended to go on stable/3.0
-- my bad, missed this in the merge.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Problem reported that ecmp wasn't working correctly in a vrf with
ipv6. Issue was that originator of the routes were sending the updates
with a link-local nexthop and nhlen of 16. In this particular case,
bgp_zebra_announce was using the wrong call to get the ifindex and
was not supplying the vrf. This caused ecmp to work only in the case
of the default vrf.
Ticket: CM-15545
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: CCR-6017
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Labeled-unicast updates were being sent with an ipv6 nexthop due to
not setting the mp_nexthop_len or nh_afi. On the receive side, the
prefix length was being incorrectly determined and has been fixed.
Also the stream for bgp_label_buf was not created. All resolved.
Ticket: CM-15260
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by:
Implement support for negotiating IPv4 or IPv6 labeled-unicast address
family, exchanging prefixes and installing them in the routing table, as
well as interactions with Zebra for FEC registration. This is the
implementation of RFC 3107.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
When starting up bgp and zebra now, you can specify
-e <number> or --ecmp <number>
and that number will be used as the maximum ecmp
that can be used.
The <number specified must be >= 1 and <= MULTIPATH_NUM
that Quagga is compiled with.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Since zebra might be sending srcdest routes down to the various daemons,
they need to understand the presence of the field at the very least.
Sadly, that's also the best we can do at this point since none of the
protocols has support for handling srcdest routes. The only consistent
thing to do is to ignore them throughout.
If an administrator wants to have the srcdest route as non-srcdest in a
protocol, setting a non-srcdest static route (possibly blackhole) is
probably the best way to go.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This introduces ZAPI_MESSAGE_SRCPFX, and if set adds a source prefix
field to ZAPI IPv6 route messages sent from daemons to zebra. The
function calls all have a new prefix_ipv6 * argument specifying the
source, or NULL. All daemons currently supply NULL.
Zebra support for processing the field was added in the previous patch,
however, zebra does not do anything useful with the value yet.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Until today the admin distance cannot be configured for any IPv6
routing protocol. This patch implements it for bgp.
Signed-off-by: Maitane Zotes <maz@open.ch>
Signed-off-by: Roman Hoog Antink <rha@open.ch>
This patch improves zebra,ripd,ripngd,ospfd and bgpd so that they can
make use of 32-bit route tags in the case of zebra,ospf,bgp or 16-bit
route-tags in the case of ripd,ripngd.
It is based on the following patch:
commit d25764028829a3a30cdbabe85f32408a63cccadf
Author: Paul Jakma <paul.jakma@hpe.com>
Date: Fri Jul 1 14:23:45 2016 +0100
*: Widen width of Zserv routing tag field.
But also contains the changes which make this actually useful for all
the daemons.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
This feature adds an L3 & L2 VPN application that makes use of the VPN
and Encap SAFIs. This code is currently used to support IETF NVO3 style
operation. In NVO3 terminology it provides the Network Virtualization
Authority (NVA) and the ability to import/export IP prefixes and MAC
addresses from Network Virtualization Edges (NVEs). The code supports
per-NVE tables.
The NVE-NVA protocol used to communicate routing and Ethernet / Layer 2
(L2) forwarding information between NVAs and NVEs is referred to as the
Remote Forwarder Protocol (RFP). OpenFlow is an example RFP. For
general background on NVO3 and RFP concepts see [1]. For information on
Openflow see [2].
RFPs are integrated with BGP via the RF API contained in the new "rfapi"
BGP sub-directory. Currently, only a simple example RFP is included in
Quagga. Developers may use this example as a starting point to integrate
Quagga with an RFP of their choosing, e.g., OpenFlow. The RFAPI code
also supports the ability import/export of routing information between
VNC and customer edge routers (CEs) operating within a virtual
network. Import/export may take place between BGP views or to the
default zebera VRF.
BGP, with IP VPNs and Tunnel Encapsulation, is used to distribute VPN
information between NVAs. BGP based IP VPN support is defined in
RFC4364, BGP/MPLS IP Virtual Private Networks (VPNs), and RFC4659,
BGP-MPLS IP Virtual Private Network (VPN) Extension for IPv6 VPN . Use
of both the Encapsulation Subsequent Address Family Identifier (SAFI)
and the Tunnel Encapsulation Attribute, RFC5512, The BGP Encapsulation
Subsequent Address Family Identifier (SAFI) and the BGP Tunnel
Encapsulation Attribute, are supported. MAC address distribution does
not follow any standard BGB encoding, although it was inspired by the
early IETF EVPN concepts.
The feature is conditionally compiled and disabled by default.
Use the --enable-bgp-vnc configure option to enable.
The majority of this code was authored by G. Paul Ziemba
<paulz@labn.net>.
[1] http://tools.ietf.org/html/draft-ietf-nvo3-nve-nva-cp-req
[2] https://www.opennetworking.org/sdn-resources/technical-library
Now includes changes needed to merge with cmaster-next.
* zclient.c: prefix length on router-id and interface address add
messages not sanity checked. fix.
* */*_zebra.c: Prefix length on zebra route read was not checked, and
clients use it to write to storage. An evil zebra could overflow
client structures by sending overly long prefixlen.
Prompted by discussions with:
Donald Sharp <sharpd@cumulusnetworks.com>
Since recently zebra uses only the ZEBRA_REDISTRIBUTE_* messages
to advertise redistributed routes to its clientes. Now the old
ZEBRA_IPV*_ROUTE_* messages are only used for client->zebra communication.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When we have a single-hop BFD session for any peering, it really means
that the peering is directly connected (maybe over a L2 network), whether
it is IBGP or EBGP. In such a case, upon link down, immediately process
IBGP peers too (and bring them down), not just EBGP peers.
This change eliminates some peculiar state transitions in specific IBGP
topologies, thus getting rid of the problem of nexthops remaining inactive
in the zebra RIB.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Ticket: CM-12390
Reviewed By: CCR-5156
Testing Done: Manual, bgp-smoke
lib/zebra.h has FILTER_X #define's. These do not belong there.
Put them in lib/filter.h where they belong.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
(cherry picked from commit 0490729cc033a3483fc6b0ed45085ee249cac779)
Made fix to update the redistribute vrf bitmap when vrf goes down and comes up.
Ticket: CM-11982
Reviewed By: CCR-5032
Testing Done: bgp-min passed, manual
There are cases where customers desire the ability to override the
default behavior of installing ipv6 prefixes with a link-local next-hop
if both a link-local and global ipv6 next-op is present in the bgp table.
This fix provides this ability and will allow the global to be used as the
next-hop. This also retains the ability to manually set the ipv6 next-hop
global value as before, and if so, this manual entry will be used for the
next-hop.
Ticket: CM-11480
Signed-off-by: Don Slice
Reviewed By: CCR-4983
Testing Done: Manual testing results attached to the ticket. bgp-min and
bgp-smoke will be completed before committing.
Logic for determining the router-id was spread out over bgp_zebra.c and
bgp_vty.c. Move to bgpd/bgpd.c and have these two call more properly
encapsulated functions.
Significant work by Christian Franke <chris@opensourcerouting.org>.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
When the metric for a redistributed route is changed through configuration,
the path attribute for the route/routes need to be "re-created" as the hash
entry would change. In the absence of this, the entry would have the correct
values but when a hash lookup is done at a later time (e.g., when trying to
free the entry), it would fail. This patch addresses the "re-creation"
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-11168
Reviewed By: CCR-4990
Testing Done: Manual, bgp-smoke
Ticket: CM-11256
Signed-off-by: Radhika Mahankali <radhika@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Kanna Rajagopal <kanna@cumulusnetworks.com>
Testing: Unit, PTM smoke, OSPF smoke, BGP Smoke
Issue:
BFD client registrations are not being sent to PTM from BGP/OSPF clients when the quagga clients have no BFD configuration. This can create stale BFD sessions in PTM when BFD is removed from quagga configuration before quagga is restarted.
BFD client de-registrations from BGP/OSPF also go missing sometimes when quagga is restarted. This also will cause stale BFD sessions in PTM.
Root Cause:
BFD client registrations were being sent at the time of BGP/OSPF daemon initialization. But, they were being sent to zebra before the socket connection between zebra and BGP/OSPF was established. This causes the missing BFD client registrations.
BFD client de-registrations are sent from zebra when zebra detects socket close for BGP/OSPF daemons. Based on the timing, the de-registrations may happen after socket between PTM and zebra is closed. This will result in missing de-registrations.
Fix:
Moved sending of BFD client registration messages to zebra connected callback to make sure that they are sent after the BGP/OSPF daemons connect with zebra.
Added BFD client de-registrations for BGP/OSPF to be also sent when zebra daemon gets restart signal. They are sent from the signal handler only if it was not already handled in zebra client socket close callback.
As the comments in if.h, it is better to call ifname2ifindex()
instead of if_nametoindex().
And ifname2ifindex() can work for VRF by appending a parameter
while if_nametoindex() can not.
Signed-off-by: Feng Lu <lu.feng@6wind.com>
Reviewed-by: Alain Ritoux <alain.ritoux@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
(cherry picked from commit 395828eea809e8b2b8c5824d3639cefedd7aa9f0)
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
This change extends the earlier change which added the ability in BGP to
trigger IPv6 Router Advertisements when an unnumbered neighbor is configured.
In addition to triggering the RAs, the advertisement interval is also set to
10 seconds. This is needed to handle the scenario where the peer may start
later.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-10896
Reviewed By: CCR-4693
Testing Done: Manual, bgp-min, bgp-smoke
