In bgp global commands northbound local-as modify callback
check for backend db for checking existing bgp instance.
In an instance where no router bgp with old ASN cleaned up
followed by new bgp instance with new AS is created,
the nb_running_get_entry in validation phase returns stale
bgp reference, which leads to rejection of the router bgp command.
Uncovered via:
toptotest evpn_type5_test_topo1/test_evpn_type5_topo1.py
test_bgp_attributes_for_evpn_address_family_p1
Signed-off-by: Chirag Shah <chirag@nvidia.com>
When we enter `router bgp` it enters non-VRF instance which is default.
No need to check for VRF/VIEW name, kinda dead code.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
For `no router bgp` without ASN check candidate
config for default bgp instance presence to avoid
failure from checking backend db where bgp instance
may not be created.
This situation can be seen in transactional cli mode
with following config.
bharat(config)# router bgp 101
bharat(config-router)# exit
bharat(config)# no router bgp
% No BGP process is configured
bharat(config)# no router bgp
% No BGP process is configured
bharat(config)#
Signed-off-by: Chirag Shah <chirag@nvidia.com>
move `router bgp` nb callback at `bgp` node level
to have access to bgp context at neighbor and peer-group
level and align create/destroy callbacks call during
no router bgp.
Earlier `no router bgp` is performed first global destroy
callback is called which essentially removes `bgp context`
then it calls to remove (parallel nodes) neighbor and peer-group
which does not have access to bgp context.
Moving router bgp at bgp solves this destroy callback ordering issue.
Signed-off-by: Chirag Shah <chirag@nvidia.com>
* Added vtysh cli commands and functions to set/unset bgp daemons no-rib
option during runtime and withdraw/announce routes in bgp instances
RIB from/to Zebra.
Signed-off-by: David Schweizer <dschweizer@opensourcerouting.org>
Add support for a BGP-wide setting to enter and exit graceful shutdown.
This will apply to all BGP peers across all BGP instances. Per-instance
configuration is disallowed if the BGP-wide setting is in effect.
Signed-off-by: Vivek Venkatraman <vivek@nvidia.com>
Enhancement to update-delay configuration to allow setting globally
rather than per-instance. Setting the update-delay is allowed either
per-vrf or globally, but not both at the same time.
Ticket: CM-31096
Signed-off-by: Don Slice <dslice@nvidia.com>
json = NULL; is set in a loop above and here we are trying to check and
free the object again which is never be reached.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
* Reverted back to using an ALIAS definition for the negated bgp
shutdown command with a concatenated message string.
* Unified cli command descriptions for bgp shutdown commands.
Signed-off-by: David Schweizer <dschweizer@opensourcerouting.org>
* Changed command description string to use "Remove" instead of
"Disable" to prevent user confusion due to double negation.
Signed-off-by: David Schweizer <dschweizer@opensourcerouting.org>
* Added a "no bgp shutdown message MSG..." cli command for ease of use
with copy/paste. Because of current limitations with DEFPY/ALIAS and
the message string concatenation, a new command instead of an ALIAS
had to be implemented.
Signed-off-by: David Schweizer <dschweizer@opensourcerouting.org>
rfc 5701 is supported. it is possible to configure in bgp vpn, a list of
route target with ipv6 external communities to import. it is to be noted
that this ipv6 external community has been developed only for matching a
bgp flowspec update with same ipv6 ext commmunity.
adding to this, draft-ietf-idr-flow-spec-v6-09 is implemented regarding
the redirect ipv6 option.
Practically, under bgp vpn, under ipv6 unicast, it is possible to
configure : [no] rt6 redirect import <IPV6>:<AS> values.
An incoming bgp update with fs ipv6 and that option matching a bgp vrf,
will be imported in that bgp vrf.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
* Applied style suggestions by automated compliance check.
* Fixed function bgp_shutdown_enable to use immutable message string.
Signed-off-by: David Schweizer <dschweizer@opensourcerouting.org>
When iterating over a `show ip bgp vrf all neighbors json` command
bgp is crashing.
The json variable was being double freed. When freeing it, set it
to NULL and then check to make sure it exists before we free.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* Replaced alias for bgp shutdown command with separate regular command
to prevent internal CLI errors.
Signed-off-by: David Schweizer <dschweizer@opensourcerouting.org>
* Fixed integration in FSM and packet handling.
* Added CLI "show" output, incl. JSON.
* For review and testing only.
Signed-off-by: David Schweizer <dschweizer@opensourcerouting.org>
* Changes allow administratively shutting down all peers of a BGP
instance.
* New CLI commands "[no] bgp shutdown" in vty shell.
* For review and testing only.
Signed-off-by: David Schweizer <dschweizer@opensourcerouting.org>
1. Sample ES display
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
torm-11# sh bgp l2vpn evpn es
ES Flags: L local, R remote, I inconsistent
VTEP Flags: E ESR/Type-4, A active nexthop
ESI Flags RD #VNIs VTEPs
03:00:00:00:00:01:11:00:00:01 LR 27.0.0.15:15 10 27.0.0.16(EA)
03:00:00:00:00:01:22:00:00:02 LR 27.0.0.15:16 10 27.0.0.16(EA)
03:00:00:00:00:01:22:00:00:03 LR 27.0.0.15:17 10 27.0.0.16(EA)
03:00:00:00:00:02:11:00:00:01 R - 10 27.0.0.17(A),27.0.0.18(A)
03:00:00:00:00:02:22:00:00:02 R - 10 27.0.0.17(A),27.0.0.18(A)
03:00:00:00:00:02:22:00:00:03 R - 10 27.0.0.17(A),27.0.0.18(A)
torm-11#
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
2. Sample ES-EVI display
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
torm-11# sh bgp l2vpn evpn es-evi
Flags: L local, R remote, I inconsistent
VTEP-Flags: E EAD-per-ES, V EAD-per-EVI
VNI ESI Flags VTEPs
1005 03:00:00:00:00:01:11:00:00:01 LR 27.0.0.16(EV)
1005 03:00:00:00:00:01:22:00:00:02 LR 27.0.0.16(EV)
1005 03:00:00:00:00:01:22:00:00:03 LR 27.0.0.16(EV)
1005 03:00:00:00:00:02:11:00:00:01 R 27.0.0.17(EV),27.0.0.18(EV)
1005 03:00:00:00:00:02:22:00:00:02 R 27.0.0.17(EV),27.0.0.18(EV)
1005 03:00:00:00:00:02:22:00:00:03 R 27.0.0.17(EV),27.0.0.18(EV)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
3. Sample EAD route display
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
torm-11# sh bgp l2vpn evpn route type ead
BGP table version is 19, local router ID is 27.0.0.15
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal
Origin codes: i - IGP, e - EGP, ? - incomplete
EVPN type-1 prefix: [4]:[ESI]:[EthTag]:[IPlen]:[VTEP-IP]
EVPN type-2 prefix: [2]:[EthTag]:[MAClen]:[MAC]:[IPlen]:[IP]
EVPN type-3 prefix: [3]:[EthTag]:[IPlen]:[OrigIP]
EVPN type-4 prefix: [4]:[ESI]:[IPlen]:[OrigIP]
EVPN type-5 prefix: [5]:[EthTag]:[IPlen]:[IP]
Network Next Hop Metric LocPrf Weight Path
Extended Community
Route Distinguisher: 27.0.0.15:5
*> [1]:[0]:[03:00:00:00:00:01:11:00:00:01]:[128]:[0.0.0.0]
27.0.0.15 32768 i
ET:8 RT:5550:1009
*> [1]:[0]:[03:00:00:00:00:01:22:00:00:02]:[128]:[0.0.0.0]
27.0.0.15 32768 i
ET:8 RT:5550:1009
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
If _force_ is set, then ALL prefixes are counted for maximum instead of
accepted only. This is useful for cases where an inbound filter is applied,
but you want maximum-prefix to act on ALL (including filtered) prefixes.
For instance, we have a configuration like:
neighbor r1 maximum-prefix 10
neighbor r1 prefix-list custom in
!
ip prefix-list custom seq 1 permit 10.0.0.0/24
ip prefix-list custom seq 2 permit 10.0.1.0/24
This will accept only 2 prefixes and discard all others instead of
shutting down the session when 10 is reached.
With this new knob (force), we will count all received prefixes and shutdown
the session when 10 is reached.
The bigger problem is when you have lots of peers with full feed and such a
configuration like in an example.
This is kinda re-ordering of how to treat filter vs. maximum-prefix.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Remove mid-string line breaks, cf. workflow doc:
.. [#tool_style_conflicts] For example, lines over 80 characters are allowed
for text strings to make it possible to search the code for them: please
see `Linux kernel style (breaking long lines and strings)
<https://www.kernel.org/doc/html/v4.10/process/coding-style.html#breaking-long-lines-and-strings>`_
and `Issue #1794 <https://github.com/FRRouting/frr/issues/1794>`_.
Scripted commit, idempotent to running:
```
python3 tools/stringmangle.py --unwrap `git ls-files | egrep '\.[ch]$'`
```
Signed-off-by: David Lamparter <equinox@diac24.net>
It's hard to cope with cases when next-hop is changed/unchanged or
peers are non-direct.
It would be better to show the hostname and nexthop IP address (both)
under `show bgp` to quickly identify the source and the real next-hop
of the route.
If `bgp default show-nexthop-hostname` is toggled the output looks like:
```
spine1-debian-9# show bgp
BGP table version is 1, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 65002
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
* 2a02:4780::/64 fe80::a00:27ff:fe09:f8a3(exit1-debian-9)
0 0 65001 ?
spine1-debian-9# show ip bgp
BGP table version is 5, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 65002
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 10.255.255.0/24 192.168.0.1(exit1-debian-9)
0 0 65001 ?
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
```
exit1-debian-9# show bgp summary
IPv4 Unicast Summary:
BGP router identifier 192.168.0.1, local AS number 100 vrf-id 0
BGP table version 8
RIB entries 15, using 2880 bytes of memory
Peers 2, using 43 KiB of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt
192.168.0.2 4 200 10 6 0 0 0 00:00:35 8 8
2a02:4780::2 4 0 0 1 0 0 0 never Active 0
Total number of neighbors 2
exit1-debian-9# show bgp summary established
IPv4 Unicast Summary:
BGP router identifier 192.168.0.1, local AS number 100 vrf-id 0
BGP table version 8
RIB entries 15, using 2880 bytes of memory
Peers 2, using 43 KiB of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt
192.168.0.2 4 200 10 6 0 0 0 00:00:39 8 8
Total number of neighbors 2
exit1-debian-9# show bgp summary failed
IPv4 Unicast Summary:
BGP router identifier 192.168.0.1, local AS number 100 vrf-id 0
BGP table version 8
RIB entries 15, using 2880 bytes of memory
Peers 2, using 43 KiB of memory
Neighbor EstdCnt DropCnt ResetTime Reason
2a02:4780::2 0 0 never Waiting for peer OPEN
Total number of neighbors 2
exit1-debian-9#
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
We have a bunch of code in bgp_vty.c that was passing
to peer_af_flag_modify_vty more than 1 flag at a time.
This was causing the underlying routines to get the
flags wrong. In order to prevent this convert all the
places where we send multiple flags down to this function
to individual flag changes.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This is the bulk part extracted from "bgpd: Convert from `struct
bgp_node` to `struct bgp_dest`". It should not result in any functional
change.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The code in the bgp extcommunity-list function was using
argv_find to get the correct idx. The problem was that
we had already done argv_finds before and idx was non-zero
thus having us always set the seq pointer to what was last
looked up. This causes us to pass in a value to the
underlying function and it would just wisely ignore it
causing a seq number of 0.
We would then write this seq number of 0 and then immediately
reject it on read in again. BOO!
Actually handle argv_find the way it was meant to be.
Ticket:CM-29926
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Clean up a few lines of cli command installation; remove a
duplicate; follow the command grouping pattern better.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
There can be cases where evpn traffic is not meshed across various
endpoints, but sent to a central pe. For this situation, remove the
nexthop unchanged default behaviour for bgp evpn. Also add route
reflector commands to bgp evpn node.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The `bgp bestpath bandwidth` command should not be a legal
command. Pull out the `no` form to allow this. Allow
`no bgp bestpath bandwidth` to work as we would expect.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The problem is that peer_af_array returns NULL when SAFI is changed to
unicast. We use unicast table, but peer is created and activated under
labeled-unicast, hence we should lookup with a proper SAFI id.
Without this patch peer_af_find() returns NULL and we can't show
PfxSnt in `show bgp summary`.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Modify the import-check command to require the underlying prefix
to exist in the rib. General consensus is that this is the correct
behavior.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problem reported that in many circumstances, RAs created in the
process of bringing up numbered IPv6 peers with extended-nexthop
capability enabled (for ipv4 over ipv6) were not stopped on the
interface when those peers were deleted. Found several circumstances
where this occurred and fix them in this patch.
Ticket: CM-26875
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
- Fix 1 byte overflow when showing GR info in bgpd
- Use PATH_MAX for path buffers
- Use unsigned specifiers for uint16_t's in zebra pbr
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Replace sprintf with snprintf where straightforward to do so.
- sprintf's into local scope buffers of known size are replaced with the
equivalent snprintf call
- snprintf's into local scope buffers of known size that use the buffer
size expression now use sizeof(buffer)
- sprintf(buf + strlen(buf), ...) replaced with snprintf() into temp
buffer followed by strlcat
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
And again for the name. Why on earth would we centralize this, just so
people can forget to update it?
Signed-off-by: David Lamparter <equinox@diac24.net>
Same as before, instead of shoving this into a big central list we can
just put the parent node in cmd_node.
Signed-off-by: David Lamparter <equinox@diac24.net>
There is really no reason to not put this in the cmd_node.
And while we're add it, rename from pointless ".func" to ".config_write".
[v2: fix forgotten ldpd config_write]
Signed-off-by: David Lamparter <equinox@diac24.net>
The only nodes that have this as 0 don't have a "->func" anyway, so the
entire thing is really just pointless.
Signed-off-by: David Lamparter <equinox@diac24.net>
Some competitive vendors like Cisco, Bird, OpenBGPD,
Nokia already have this by default enabled.
The list is here: https://github.com/bgp/RFC8212
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
... Oops ...
(for context, the defaults code originally didn't have a dedicated
"bool" variant and just used long for bools... I derp'd this when
adding bool as a separate case :( )
Reported-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@diac24.net>
This macro is undefined if vnc is disabled, and while it defaults to 0,
this is still wrong and causes issues with -Werror
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Support configurable options to control how link bandwidth is handled
by the receiver. The default behavior is to automatically honor the
link bandwidths received and use it to perform a weighted ECMP BUT only
if all paths in the multipath have associated link bandwidth; if one or
more paths do not have link bandwidth, normal ECMP is performed among
the multipaths. This behavior is as recommended by
https://tools.ietf.org/html/draft-ietf-idr-link-bandwidth.
The additional options available are to (a) completely ignore any link
bandwidth (i.e., weighted ECMP is effectively disabled), (b) skip paths
in the multipath which do not have link bandwidth and perform weighted
ECMP among the other paths (if at least some paths have the bandwidth)
or (c) use a default weight (value chosen is 1) for the paths which
do not have link bandwidth.
The command syntax is
bgp bestpath bandwidth <ignore|skip-missing|default-weight-for-missing>
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
In the past, we always displayed the number of buffered ingress packets
as zero because there was no packet buffering in the input path and
therefore never any queue size to report. They're buffered now so we can
display something meaningful instead of 0.
Also change the inq / outq lookups to be atomic, since they can be
modified elsewhere. These should still compile down to an unfenced word
read but it's good to be explicit.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Add new function `bgp_node_get_prefix()` and modify
the bgp code base to use it.
This is prep work for the struct bgp_dest rework.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problem seen that if "import vrf route-map RMAP" was entered
without any vrfs being imported, the configuration was displayed
as "route-map vpn import RMAP". Additionally, if "import vrf
route-map" was entered without specifying a route-map name,
the command was accepted and the word "route-map" would be
treated as a vrf name. This fix resolves both of those issues
and also allows deleting the "import vrf route-map" line without
providing the route-map name.
Ticket: CM-28821
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Some were converted to bool, where true/false status is needed.
Converted to void only those, where the return status was only false or true.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
RCA: When doppelganger still around and clear bgp is issued
there are chances of peer getting deleted and next pointer
is a freed peer pointer.
Fix: Pass address of nnode to get next safe peer pointer.
Signed-off-by: Santosh P K <sapk@vmware.com>
annie# show bgp ipv4 uni summ
BGP router identifier 192.168.201.136, local AS number 64539 vrf-id 0
BGP table version 22458946
RIB entries 1458006, using 178 MiB of memory
Peers 4, using 68 KiB of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
45.33.5.119 4 0 0 0 0 0 0 never Active
65.19.134.122 4 15096 4611832 108292 0 0 0 6d22h55m 800670
107.13.46.23 4 0 0 0 0 0 0 never Connect
robot(192.168.201.139) 4 64540 11159975 11365599 0 0 0 05w2d05h Connect
Total number of neighbors 4
On very busy systems The column output for MsgRcvd and MsgSent can quickly move past 7 columns.
Add a couple more to allow for even display.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There is no need for a call into get_afi_safi_str for the
json side since we add it based upon the afi safi str below.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If you have enums handled in a switch adding a default case
makes it fun to fix when new stuff is added later. Remove.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* Added CLI commands to update rib-stale-time, running in
Cmd : "bgp gaceful-restart rib-stale-time (1-3000)".
Cmd : "no bgp gaceful-restart rib-stale-time".
* Integrating the hooks function for signalling from BGPD
to ZEBRA to ZEBRA to enable or disable GR feature in ZEBRA
depending on bgp per peer gr configuration.
Signed-off-by: Biswajit Sadhu <sadhub@vmware.com>
*After a restarting router comes up and the bgp session is
successfully established with the peer. If the restarting
router doesn’t have any route to send, it send EOR to
the peer immediately before receiving updates from its peers.
*Instead the restarting router should send EOR, if the
selection deferral timer is not running OR count of eor received
and eor required are matches then send EOR.
Signed-off-by: Biswajit Sadhu <sadhub@vmware.com>
BGP disable EOR sending is a useful command for testing various
scenarios of BGP graceful restart.
* Added the hidden CLI command : bgp graceful-restart disable-eor
* The CLI will not be displayed in "show running-config" and will not
be stored in configuration file.
* When enabled, EOR will not be sent to peer
Signed-off-by: Biswajit Sadhu <sadhub@vmware.com>
Signed-off-by: Soman K S <somanks@vmware.com>
BGP GR Neighbor mode is showing the default string as “NotRecieved”,
as the bgp gr neighbour capability was not processed,
since the local mode is “Disable”.
However now it would be changed to “NotApplicable”.
Signed-off-by: Biswajit Sadhu <sadhub@vmware.com>
* Changing GR mode on a router needs a session reset from the
SAME router to negotiate new GR capability.
* The present GR implementation needs a session reset after every
new BGP GR mode change.
* When BGP session reset happens due to sending or receiving BGP
notification after changing BGP GR mode, there is no need of
explicit session reset.
Signed-off-by: Biswajit Sadhu <sadhub@vmware.com>
* BGP GR Neighbour mode in show command would show as
“NotApplicable”, when local mode is “Disable”. As the bgp
gr neighbour capability was not processed, since the local mode
is “Disable”.
* Minor changes in show Selection Deferral Time.
Signed-off-by: Biswajit Sadhu <sadhub@vmware.com>
* Selection Deferral Timer for Graceful Restart.
* Added selection deferral timer handling function.
* Route marking as selection defer when update message is received.
* Staggered processing of routes which are pending best selection.
* Fix for multi-path test case.
Signed-off-by: Biswajit Sadhu <sadhub@vmware.com>
and DS.
* Added config commands and data structures for deferral timer
configuration and processing.
Cmd : bgp graceful-restart select-defer-time (0-3600)
Cmd : no bgp graceful-restart select-defertime (0-3600)
Signed-off-by: Biswajit Sadhu <sadhub@vmware.com>
Signed-off-by: Soman K S <somanks@vmware.com>
* Added new show command to show the graceful restart
information for each neighbor.
Cmd: show bgp [<ipv4|ipv6>] neighbors [<A.B.C.D|X:X::X:X|WORD>] graceful-restart
* Changes to show neighbors commands for displaying
graceful restart information.
Cmd :show [ip] bgp [<view|vrf> VIEWVRFNAME] [<ipv4|ipv6>] neighbors [<A.B.C.D|X:X::X:X|
Signed-off-by: Biswajit Sadhu <sadhub@vmware.com>
It's quite confusing when you see this:
```
exit1-debian-9(config-router)# bgp listen
listen Configure BGP defaults
```
And:
```
exit1-debian-9(config-router)# no bgp listen
listen unset maximum number of BGP Dynamic Neighbors that can be created
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Fixes:
```
exit1-debian-9(config-router)# no bgp listen range 192.168.10.0/24 peer-group TEST
% Peer-group does not exist
exit1-debian-9(config-router)#
```
Closes https://github.com/FRRouting/frr/issues/5570
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
This moves all the DFLT_BGP_* stuff over to the new defaults mechanism.
bgp_timers_nondefault() added to get better file-scoping.
v2: moved everything into bgp_vty.c so that the core BGP code is
independent of the CLI-specific defaults. This should make the future
northbound conversion easier.
Signed-off-by: David Lamparter <equinox@diac24.net>
There's no good reason to have this in bgpd.c; it's just there
historically. Move it to bgp_vty.c where it makes more sense.
Signed-off-by: David Lamparter <equinox@diac24.net>
Without with fix we can't delete large-community-list using
no bgp large-community-list standard WORD, but no bgp large-community-list WORD
Let's keep this identical what we have with expanded lists as well.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
This patch allows using sequence numbers for community lists. We already have
this for prefix-lists and access-lists.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
The sender side AS path loop detection code was implemented since the
import of Quagga code, however it was always disabled by a `ifdef`
guard.
Lets allow the user to decide whether or not to enable this feature on
run-time.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Problem reported with error messages appearing in the log
complaining about invalid afi/safi combinations. Determined
that the error messages were recently added in the function
that turns afi and safi values to strings. Unfortunately,
the function is called from places using FOREACH_AFI_SAFI,
which spins thru every afi and safi number including some
that are not legal together (ipv4 evpn and l2vpn multicast
for example.) This fix removes these error messages since
it is not necessarily an error to call it with invalid
combinations.
Ticket: CM-26883
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
There was a silly bug introduced when the command to show failed sessions
was added. A missing "," caused the wrong error message to be printed.
Debugging this led down a path that:
- Led to discovering one more error message that needed to be added
- Providing the error code along with the string in the JSON output
to allow programs to key off numbers rather than strings.
- Fixing the missing ","
- Changing the error message to "Waiting for Peer IPv6 LLA" to
make it clear that we're waiting for the link local addr.
Signed-off-by: Dinesh G Dutt <5016467+ddutt@users.noreply.github.com>
Based on a suggestion by Donald Sharp, this patch adds the counts of the
number of times a BGP peering session has transitioned from Estd->NotEstd
and from NotEstd->Estd to the JSON output only of the
"show [ip] bgp [vrf <vrf>] summary" command. The idea is that even if the
current session is well and up, but a sessions has trasnitionined in and
out of Estd state multiple times, its worth noting that. We cannot change
the non-JSON output as easily, and so this command only addresses the JSON
part for now. The fields added are the ones that were provided only as part
of the "show bgp neighbor" command.
Signed-off-by: Dinesh G Dutt <5016467+ddutt@users.noreply.github.com>
In a data center, having 32-128 peers is not uncommon. In such a situation, to find a
peer that has failed and why is several commands. This hinders both the automatability of
failure detection and the ease/speed with which the reason can be found. To simplify this
process of catching a failure and its cause quicker, this patch does the following:
1. Created a new function, bgp_show_failed_summary to display the
failed summary output for JSON and vty
2. Created a new function to display the reset code/subcode. This is now used in the
failed summary code and in the show neighbors code
3. Added a new variable failedPeers in all the JSON outputs, including the vanilla
"show bgp summary" family. This lists the failed session count.
4. Display peer, dropped count, estd count, uptime and the reason for failure as the
output of "show bgp summary failed" family of commands
5. Added three resset codes for the case where we're waiting for NHT, waiting for peer
IPv6 addr, waiting for VRF to init.
This also counts the case where only one peer has advertised an AFI/SAFI.
The new command has the optional keyword "failed" added to the classical summary command.
The changes affect only one existing output, that of "show [ip] bgp neighbors <nbr>". As
we track the lack of NHT resolution for a peer or the lack of knowing a peer IPv6 addr,
the output of that command will show a "waiting for NHT" etc. as the last reset reason.
This patch includes update to the documentation too.
Signed-off-by: Dinesh G Dutt <5016467+ddutt@users.noreply.github.com>
In a number of places, the JSON output had invalid key names for
AFI/SAFI. For example, the key name in JSON was "IPv4 Unicast" which
is invalid as a JSON Key name. Many JSON tools such as those used in
Ansible, jq etc. all fail to parse the output in these scenarios. The
valid name is ipv4Unicast. There's already a routine afi_safi_json()
defined to handle this change, but it was not consistently called.
The non-JSON version was called afi_safi_print() and it merely returned
the CLI version of the string, didn't print anything.
This patch deals with this issue by:
- Renaming afi_safi_print to get_afi_safi_str()
- get_afi_safi_str takes an additional param, for_json which if true
will return the JSON-valid string
- Renaming afi_safi_json to get_afi_safi_json_str()
- Creating a new routine get_afi_safi_vty_str() for printing to vty
- Consistently using get_afi_safi_str() with the appropriate for_json
value
Signed-off-by: Dinesh G Dutt <5016467+ddutt@users.noreply.github.com>
When user wants to dump individual large-community-list with the name
then bgp throws an error. It is due to command to dump the bgp RIB routes
having a particular large-community-list values. To segregate both the
commands this fix has added the detail keyword in the below command.
show bgp large-community-list <(1-500)|WORD> detail
The same code change is applicable for community-list also.
Signed-off-by: vishaldhingra<vdhingra@vmware.com>
Problem reported that "clear bgp *" only cleared ipv6 peers.
Changed the logic to clear all afi/safis of all peers in
that case. Also improved the operation of clearing
individual afi/safi using soft/in/out to do the right thing.
Ticket: CM-25887
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Debian packaging when run finds a bunch of spelling errors:
I: frr: spelling-error-in-binary usr/bin/vtysh occurences occurrences
I: frr: spelling-error-in-binary usr/lib/frr/bfdd Amount of times Number of times
I: frr: spelling-error-in-binary usr/lib/frr/bgpd occurences occurrences
I: frr: spelling-error-in-binary usr/lib/frr/bgpd recieved received
I: frr: spelling-error-in-binary usr/lib/frr/isisd betweeen between
I: frr: spelling-error-in-binary usr/lib/frr/ospf6d Infomation Information
I: frr: spelling-error-in-binary usr/lib/frr/ospfd missmatch mismatch
I: frr: spelling-error-in-binary usr/lib/frr/pimd bootsrap bootstrap
I: frr: spelling-error-in-binary usr/lib/frr/pimd Unknwon Unknown
I: frr: spelling-error-in-binary usr/lib/frr/zebra Requsted Requested
I: frr: spelling-error-in-binary usr/lib/frr/zebra uknown unknown
I: frr: spelling-error-in-binary usr/lib/x86_64-linux-gnu/frr/libfrr.so.0.0.0 overriden overridden
This commit fixes all of them except the bgp `recieved` issue due to
it being part of json output. That one will need to go through
a deprecation cycle.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
BGP large-communities configuration CLI is successful even if
the command is configured without any attributes.
For ex., the below commands are successful.
1) "bgp large-community-list standard TEST permit"
2) "bgp large-community-list standard TEST deny"
The CLI definitions that allow these erroneous configurations need to be removed.
Signed-off-by: NaveenThanikachalam nthanikachal@vmware.com
