This commit add cil to configure BGP SRv6-VPN sid allocation.
Almost mechanism are based on BGP MPLS-VPN.
User can allocate and export sid with using following config.
Then bgpd try to allocate new SID to redirect vpn to vrf using
SRv6 localsid End.DT4/DT6. Currently linux kernel will regect
End.DT4 route install due to no-implementation.
(at-least today's FRR's ci kernel.)
So now we only supports BGP SRv6-VPNv6.
router bgp 1
segment-routing srv6
locator loc1
!
address-family ipv6 vpn
exit-address-family
!
router bgp 1 vrf vrf10
address-family ipv6 unicast
sid vpn export 1 !!(option1)!!
sid vpn export auto !!(option2)!!
exit-address-family
!
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
Show alias name instead of numerical value in `show bgp <prefix>. E.g.:
```
root@exit1-debian-9:~/frr# vtysh -c 'sh run' | grep 'bgp community alias'
bgp community alias 65001:123 community-1
bgp community alias 65001:123:1 lcommunity-1
root@exit1-debian-9:~/frr#
```
```
exit1-debian-9# sh ip bgp 172.16.16.1/32
BGP routing table entry for 172.16.16.1/32, version 21
Paths: (2 available, best #2, table default)
Advertised to non peer-group peers:
65030
192.168.0.2 from home-spine1.donatas.net(192.168.0.2) (172.16.16.1)
Origin incomplete, metric 0, valid, external, best (Neighbor IP)
Community: 65001:12 65001:13 community-1 65001:65534
Large Community: lcommunity-1 65001:123:2
Last update: Fri Apr 16 12:51:27 2021
exit1-debian-9#
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
This commit introduces the implementation for the north-bound
callbacks for the bgp-specific route-map match and set clauses.
Signed-off-by: NaveenThanikachalam <nthanikachal@vmware.com>
Signed-off-by: Sarita Patra <saritap@vmware.com>
Remove old BFD API usage and replace it with the new one.
Highlights:
- More shared code: the daemon gets notified with callbacks instead of
having to roll its own code to find the notified sessions.
- Less code to integrate with BFD.
- Remove hidden commands to configure single / multi hop. Use
protocol data instead.
BGP can determine if a peer is single/multi hop according to the
following criteria:
a. If the IP address is a link-local address (single hop)
b. The network is shared with peer (single hop)
c. BGP is configured for eBGP multi hop / TTL security (multi hop)
- Respect the configuration hierarchy:
a. Peer configuration take precendence over peer-group
configuration.
b. When peer group configuration is removed, reset peer
BFD configurations to defaults (unless peer had specific
configs).
Example:
neighbor foo peer-group
neighbor foo bfd profile X
neighbor 192.168.0.2 peer-group foo
neighbor 192.168.0.2 bfd
! If peer-group is removed the profile configuration gets
! removed from peer 192.168.0.2, but BFD will still enabled
! because of the neighbor specific bfd configuration.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
ES-VRF entries are maintained for the purpose of L3-NHG creation -
1. Each ES-EVI entry is associated with a tenant VRF. This associaton
triggers the creation of an ES-VRF entry.
2. Type-2/MAC-IP routes are imported into a tenant VRF and programmed as
a /32 or host route entry in the dataplane. If the destination of
the host route is a remote-ES the route is programmed with the
corresponding (keyed in by {vrf,ES-id}) L3-NHG.
3. The reason for this indirection (route->L3-NHG, L3-NHG->list-of-VTEPs)
is to avoid route updates to the dplane when a remote-ES link flaps i.e.
instead of updating all the dependent routes the NHG's contents are
updated. This reduces the amount of dataplane updates (fewer nhg updates vs.
route updates) allowing for a faster failover.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
The MH datastructures were being released before the paths that were
referencing them. Fix is to do the MH cleanup last.
The MH finish function has also been stripped down to only do a
datastructure cleanup i.e. avoid sending route updates etc.
Ticket: 31376
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
On bgpd bootstrap register routing hook which ensures
only single bgp named instance created per vrf routing
hierarchy.
Signed-off-by: Chirag Shah <chirag@nvidia.com>
I wanted to preserve the old code flow to see what might
be needed in the future in commit:
23ca3269da
Coverity doesn't like dead code. So let's comment it out.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
rpki config can be displayed in the 'show running-config'.
there is a fix to be done yet, this is related to the order of rpki per
vrf configuration. actually, the output is not saveable in the
running-config since the rpki commands are swapped. this prevents from
running rpki config at startup.
That commit also changes the identation, since rpki configure node was
with one extra space. reducing this, and add the changes for vrf
configuration too.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
SIGHUP is ostensibly supposed to reload configuration
from a fresh slate. This is currently horribly broken
so much so that bgp just crashes. I see no point
in trying to make this work considering the yang
work coming down the pike.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This macro is undefined if vnc is disabled, and while it defaults to 0,
this is still wrong and causes issues with -Werror
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Changes to the capability sending function to advertise
graceful restart capability in the bgp OPEN message.
Signed-off-by: Biswajit Sadhu <sadhub@vmware.com>
Add -s X or --socket_size X to the bgp cli to allow
the end user to specify the outgoing bgp tcp kernel
socket buffer size.
It is recommended that this option is only used on
large scale operations.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
that hook is called back when default vrf name changes.
note that the hook is bgp_vrf_enable, and that the function is slightly
modified in order to be able to move bgp vrf instance from vrf to
default instance. for this, rfapi contexts are allocated.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This makes the instance bearing the advertise-all-vni config option
register to zebra as the EVPN one, forwarding it the option.
Signed-off-by: Tuetuopay <tuetuopay@me.com>
Sponsored-by: Scaleway
Found that previous fix for this issue caused collatoral damage and
reverted that fix. This fix clears the vrf_bitmaps when the vrf is
disabled/deleted and then re-applies the redist config when the vrf
is re-enabled.
Ticket: CM-24231
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
label pool finalisation must be delayed after route deletion on bgp.
otherwise a crash will happen, while labels will be released.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
if zebra is not started, then vrf identifiers are not available. This
prevents import/exportation to be available. This commit permits having
import/export available, even when zebra is not started.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
FRR_DAEMON_INFO should now contain an array of 'frr_yang_module_info'
structures describing the YANG modules implemented by the daemon.
This array will be used by frr_init() function to load all YANG modules
and initialize the northbound callbacks during the daemon initialization.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Corrections so that the BGP daemon can work with the label manager properly
through a label-manager proxy. Details:
- Correction so the BGP daemon behind a proxy label manager gets the range
correctly (-I added to the BGP daemon, to set the daemon instance id)
- For the BGP case, added an asynchronous label manager connect command so
the labels get recycled in case of a BGP daemon reconnection. With this,
BGPd and LDPd would behave similarly.
Signed-off-by: F. Aragon <paco@voltanet.io>
Because a VRF name can be used for default VRF, or an alias of an
already created VRF can be passed as parameter, the default VRF name
must be found out. This avoids creating double BGP instances for
example.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The Vrf aliases can be known with a specific hook. That hook will then,
from zebra propagate the information to the relevant zapi clients.
The registration hook function is the same for all daemons.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
