The `destination` field of the connection structure was used to store
the broadcast address, if the connection was not p2p. This multipurpose
is not very evident and the benefits over calculating the bcast address
on the fly minimal.
Signed-off-by: Juergen Werner <juergen@opensourcerouting.org>
In if_netlink.c, when an interface structure, ifp, is first created,
its possible for the master to come up after the slave interface does.
This means, the slave interface has no way to display the master's ifname
in show outputs. To fix this, we need to allow creation by ifindex instead
of by ifname so that this issue is handled.
Signed-off-by: Dinesh G Dutt<5016467+ddutt@users.noreply.github.com>
Field vrf_id is replaced by the pointer of the struct vrf *.
For that all other code referencing to (interface)->vrf_id is replaced.
This work should not change the behaviour.
It is just a continuation work toward having an interface API handling
vrf pointer only.
some new generic functions are created in vrf:
vrf_to_id, vrf_to_name,
a zebra function is also created:
zvrf_info_lookup
an ospf function is also created:
ospf_lookup_by_vrf
it is to be noted that now that interface has a vrf pointer, some more
optimisations could be thought through all the rest of the code. as
example, many structure store the vrf_id. those structures could get
the exact vrf structure if inherited from an interface vrf context.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
vrf_id parameter is replaced with struct vrf * parameter. It is
needed to create vrf structure before entering in the fuction.
an error is generated in case the vrf parameter is missing.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
the vrf_id parameter is replaced by struct vrf * parameter.
this impacts most of the daemons that look for an interface based on the
name and the vrf identifier.
Also, it fixes 2 lookup calls in zebra and sharpd, where the vrf_id was
ignored until now.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
vrf pointer is used as reference when calling if_get_by_name() function.
this will permit to create interfaces with an unknown vrf_id, since it
is only necessary to get the vrf structure to store the interfaces.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
* Search for macvlan interfaces with the appropriate name and MAC
address when starting up a new VRRP instance
* Split VRRP socket into two; one for Tx, one for Rx
* Bind Tx socket to the macvlan subinterface so our VRRP advertisements
go out with the correct MAC address
* Send ARP requests from this macvlan subinterface
* Improve error messaging
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
These are necessary to use functions defined in these headers from C++.
Signed-off-by: David Lamparter <equinox@diac24.net>
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
MACVLAN devices are typically used for applications such as VRR/VRRP that
require a second MAC address (virtual). These devices have a corresponding
SVI/VLAN device -
root@TORC11:~# ip addr show vlan1002
39: vlan1002@bridge: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9152 qdisc noqueue master vrf1 state UP group default
link/ether 00:02:00:00:00:2e brd ff:ff:ff:ff:ff:ff
inet6 2001:aa:1::2/64 scope global
valid_lft forever preferred_lft forever
root@TORC11:~# ip addr show vlan1002-v0
40: vlan1002-v0@vlan1002: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9152 qdisc noqueue master vrf1 state UP group default
link/ether 00:00:5e:00:01:01 brd ff:ff:ff:ff:ff:ff
inet6 2001:aa:1::a/64 metric 1024 scope global
valid_lft forever preferred_lft forever
root@TORC11:~#
The macvlan device is used primarily for RX (VR-IP/VR-MAC). And TX is via
the SVI. To acheive that functionality the macvlan network's metric
is set to a higher value.
Zebra currently ignores the devaddr metric sent by the kernel and hardcodes
it to 0. This commit eliminates that hardcoding. If the devaddr metric
is available (METRIC_MAX) it is used for setting up the connected route
otherwise we fallback to the dev/interface metric.
Setting the macvlan metric to a higher value ensures that zebra will always
select the connected route on the SVI (and subsequently use it for next hop
resolution etc.) -
root@TORC11:~# vtysh -c "show ip route vrf vrf1 2001:aa:1::/64"
Routing entry for 2001:aa:1::/64
Known via "connected", distance 0, metric 1024, vrf vrf1
Last update 11:30:56 ago
* directly connected, vlan1002-v0
Routing entry for 2001:aa:1::/64
Known via "connected", distance 0, metric 0, vrf vrf1, best
Last update 11:30:56 ago
* directly connected, vlan1002
root@TORC11:~#
Ticket: CM-23511
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
The frr-interface YANG module models interfaces using a YANG list keyed
by the interface name and the interface VRF. Interfaces can't be keyed
only by their name since interface names might not be globally unique
when the netns VRF backend is in use. When using the VRF-Lite backend,
however, interface names *must* be globally unique. In this case, we need
to validate the uniqueness of interface names inside the appropriate
northbound callback since this constraint can't be expressed in the
YANG language. We must also ensure that only inactive interfaces can be
removed, among other things we need to validate in the northbound layer.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Introduce frr-interface.yang, which defines a model for managing FRR
interfaces.
Update the 'frr_yang_module_info' array of all daemons that will
implement this module.
Add automatically generated stub callbacks in if.c. These callbacks will
be implemented in the following commit.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Modify if_lookup_by_index to accept a VRF_UNKNOWN
as a vrf_id. This will cause it to look in all
vrf's for the interface pointer.
Subsequently all if_XXXX functions that call this function
will also get this behavior.
VRF_UNKNOWN *should* not be used for interface creation
as that this will break some core assumptions.
This work is part of allowing vrf route leaking. Currently
it is possible to create a route in the linux kernel that has
a nexthop across vrf boundaries.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This improves code readability and also future-proofs our codebase
against new changes in the data structure used to store interfaces.
The FOR_ALL_INTERFACES_ADDRESSES macro was also moved to lib/ but
for now only babeld is using it.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Performance tests showed that, when running on a system with a large
number of interfaces, some daemons would spend a considerable amount
of time in the if_lookup_by_index() function. Introduce a new rb-tree
to solve this problem.
With this change, we need to use the if_set_index() function whenever
we want to change the ifindex of an interface. This is necessary to
ensure that the 'ifaces_by_index' rb-tree is updated accordingly. The
return value of all insert/remove operations in the interface rb-trees
is checked to ensure that an error is logged if a corruption is
detected.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
IFINDEX_DELETED is not necessary anymore as we moved from a global
list of interfaces to a list of interfaces per VRF.
This reverts commit 84361d615.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is an important optimization for users running FRR on systems with
a large number of interfaces (e.g. thousands of tunnels). Red-black
trees scale much better than sorted linked-lists and also store the
elements in an ordered way (contrary to hash tables).
This is a big patch but the interesting bits are all in lib/if.[ch].
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Make use of strnlen() and strlcpy() so we can get rid of these
convoluted if_*_by_name_len() functions.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This allows modules to register their own additional hooks on interface
creation/deletion.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This reverts commit c14777c6bf.
clang 5 is not widely available enough for people to indent with. This
is particularly problematic when rebasing/adjusting branches.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The if_update function was taking the interface name as
input and reapplying it, using strncpy to reapply the name.
This has several issues. strncpy should not be used
to copy memory in place. The second issue is that
the interface name is not actually changing when we
update interface to be in the new vrf.
Since every usage of if_update was just reapplying the same
name the interface actually had, just remove that part of
the function and rename it to if_update_to_new_vrf
to represent what it is actually doing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
lib -> Add a bit of documentation about what units we are in.
zebra -> Fix failure case to be a bit better.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This is a prepatory commit for future improvements.
Add a change to the zapi to pass the interface speed up.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* lib/if.h: Remove LP_TE as Link Parameters is set if different from 0
See IS_LINK_PARAMS_SET macro and use LP_TE_METRIC to determine if TE metric
is set or not
* lib/if.c: replace LP_TE by LP_TE_METRIC in default LP status
* zebra/interface.c: replace LP_TE by LP_TE_METRIC and check if TE metric
is equal to standard metric or not
* ospfd/ospf_te.c: replace LP_TE by LP_TE_METRIC
* isisd/isis_te.c: replace LP_TE by LP_TE_METRIC
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
When link-params is configured it auto starts displaying
6000-02# conf t
dell-s6000-02(config)# int swp1
dell-s6000-02(config-if)# link-params
dell-s6000-02(config-link-params)# admin-grp 0x12345678
dell-s6000-02(config-link-params)# end
dell-s6000-02# show run
interface swp1
link-params
enable
metric 0 <----Remove the bw lines
max-bw 1.25e+06
max-rsv-bw 1.25e+06
unrsv-bw 0 1.25e+06
unrsv-bw 1 1.25e+06
unrsv-bw 2 1.25e+06
unrsv-bw 3 1.25e+06
unrsv-bw 4 1.25e+06
unrsv-bw 5 1.25e+06
unrsv-bw 6 1.25e+06
unrsv-bw 7 1.25e+06
admin-grp 305419896
exit-link-params
!
I'd like to reduce this to:
interface enp0s3
ip igmp
ip pim sm
link-params
enable
admin-grp 0x12345678 <----- Fix this to be what we entered
exit-link-params
!
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This moves all install_element calls into the file where the DEFUNs are
located. This fixes several small related bugs:
- ospf6d wasn't installing a "no interface FOO" command
- zebra had a useless copy of "interface FOO"
- pimd's copy of "interface FOO" was not setting qobj_index, which means
"description LINE" commands would fail with an error
The next commit will do the actual act of making "foo_cmd" static.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
We can't use if_lookup_prefix() in rip_update_process() because this
function uses prefix_cmp() internally to try matching an interface
address to a static neighbor's address.
Since prefix_cmp() tries to match exact prefixes, if_lookup_prefix()
was always returning NULL.
What we really need here is to use prefix_match(), which checks if
one prefix includes the other (e.g. one /24 interface including a /32
static neighbor's address). The fix then is to replace the call to
if_lookup_prefix() and use if_lookup_address() instead, which uses
prefix_match() internally.
Fixes IxANVL RIP test 17.1
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Since we have autoconf results from a wide swath of target platforms, we
can go remove checks that have the same result on all systems.
This also removes several "fallback" implementations of functions that,
at some point in the history, weren't available on all target platforms.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This places the appropriate calls so library objects can be used with
qobj "pointers", especially in the CLI.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This is a rather large mechanical commit that splits up the memory types
defined in lib/memtypes.c and distributes them into *_memory.[ch] files
in the individual daemons.
The zebra change is slightly annoying because there is no nice place to
put the #include "zebra_memory.h" statement.
bgpd, ospf6d, isisd and some tests were reusing MTYPEs defined in the
library for its own use. This is bad practice and would break when the
memtype are made static.
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
[CF: rebased for cmaster-next]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
NOTE: I am squashing several commits together because they
do not independently compile and we need this ability to
do any type of sane testing on the patches. Since this
series builds together I am doing this. -DBS
This new structure is the basis to get new link parameters for
Traffic Engineering from Zebra/interface layer to OSPFD and ISISD
for the support of Traffic Engineering
* lib/if.[c,h]: link parameters struture and get/set functions
* lib/command.[c,h]: creation of a new link-node
* lib/zclient.[c,h]: modification to the ZBUS message to convey the
link parameters structure
* lib/zebra.h: New ZBUS message
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Add support for IEEE 754 format
* lib/stream.[c,h]: Add stream_get{f,d} and stream_put{f,d}) demux and muxers to
safely convert between big-endian IEEE-754 single and double binary
format, as used in IETF RFCs, and C99. Implementation depends on host
using __STDC_IEC_559__, which should be everything we care about. Should
correctly error out otherwise.
* lib/network.[c,h]: Add ntohf and htonf converter
* lib/memtypes.c: Add new memeory type for Traffic Engineering support
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Add link parameters support to Zebra
* zebra/interface.c:
- Add new link-params CLI commands
- Add new functions to set/get link parameters for interface
* zebra/redistribute.[c,h]: Add new function to propagate link parameters
to routing daemon (essentially OSPFD and ISISD) for Traffic Engineering.
* zebra/redistribute_null.c: Add new function
zebra_interface_parameters_update()
* zebra/zserv.[c,h]: Add new functions to send link parameters
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Add support of new link-params CLI to vtysh
In vtysh_config.c/vtysh_config_parse_line(), it is not possible to continue
to use the ordered version for adding line i.e. config_add_line_uniq() to print
Interface CLI commands as it completely break the new LINK_PARAMS_NODE.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Update Traffic Engineering support for OSPFD
These patches update original code to RFC3630 (OSPF-TE) and add support of
RFC5392 (Inter-AS v2) & RFC7471 (TE metric extensions) and partial support
of RFC6827 (ASON - GMPLS).
* ospfd/ospf_dump.[c,h]: Add new dump functions for Traffic Engineering
* ospfd/ospf_opaque.[c,h]: Add new TLV code points for RFC5392
* ospfd/ospf_packet.c: Update checking of OSPF_OPTION
* ospfd/ospf_vty.[c,h]: Update ospf_str2area_id
* ospfd/ospf_zebra.c: Add new function ospf_interface_link_params() to get
Link Parameters information from the interface to populate Traffic Engineering
metrics
* ospfd/ospfd.[c,h]: Update OSPF_OPTION flags (T -> MT and new DN)
* ospfd/ospf_te.[c,h]: Major modifications to update the code to new
link parameters structure and new RFCs
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
tmp
This removes the BSD specific usage of struct sockaddr_dl
hardware address. This unifies to use explict hw_addr member for
the address, and zebra specific enumeration for the link layer
type.
Additionally the zapi is updated to never send platform specific
structures over the wire, but the ll_type along with hw_addr_len
and hw_addr are now sent for all platforms.
Based on initial work by Paul Jakma.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
# Please enter the commit message for your changes. Lines starting
# with '#' will be kept; you may remove them yourself if you want to.
# An empty message aborts the commit.
#
# Author: Timo Teräs <timo.teras@iki.fi>
#
# rebase in progress; onto 9c2f85d
# You are currently editing a commit while rebasing branch 'renato' on '9c2f85d'.
#
# Changes to be committed:
# modified: isisd/isis_circuit.c
# modified: lib/if.c
# modified: lib/if.h
# modified: lib/zclient.c
# modified: zebra/interface.c
# modified: zebra/interface.h
# modified: zebra/kernel_socket.c
# modified: zebra/rt_netlink.c
# modified: zebra/rtadv.c
# modified: zebra/zserv.c
#
# Untracked files:
# "\033\033OA\033OB\033"
# 0001-bgpd-fix-build-on-Solaris.patch
# ldpd/
# redhat/ldpd.init
# redhat/ldpd.service
# tags
#
When looking up the connected route, the delete was
causing crashes in OSPF due to the oi having copies
of the freshly deleted connected interface. Fix
code to first lookup the connected route and use that
instead of just deleting it.
Valgrind Findings:
==24112== Invalid read of size 1
==24112== at 0x4E8283F: ospf_intra_add_stub (ospf_route.c:614)
==24112== by 0x4E80B15: ospf_spf_process_stubs (ospf_spf.c:1064)
==24112== by 0x4E80F74: ospf_spf_calculate (ospf_spf.c:1269)
==24112== by 0x4E811C9: ospf_spf_calculate_timer (ospf_spf.c:1339)
==24112== by 0x5126230: thread_call (thread.c:1577)
==24112== by 0x401E00: main (ospf_main.c:377)
==24112== Address 0x7f56a09 is 9 bytes inside a block of size 40 free'd
==24112== at 0x4C29E90: free (in
/usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==24112== by 0x51290B3: zfree (memory.c:132)
==24112== by 0x51287F0: connected_free (if.c:987)
==24112== by 0x514406A: zebra_interface_address_read (zclient.c:1146)
==24112== by 0x4E5A81C: ospf_interface_address_add (ospf_zebra.c:262)
==24112== by 0x5144838: zclient_read (zclient.c:1397)
==24112== by 0x5126230: thread_call (thread.c:1577)
==24112== by 0x401E00: main (ospf_main.c:377)
Ticket: CM-10890
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
The connected_lookup_address function should really
be a connected_lookup_prefix function. Refactor
the code to use it.
Ticket: CM-10890
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
The file if.c has a iflist that had the list of interfaces
in the default vrf. Remove this variable and replace
with a vrf_iflist lookup on the default vrf where it
was used.
Additionally, modify ptm code to iterate over all vrf's
when enabling ptm.
Ticket: CM-10338
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Radhika Mahankali <radhika@cumulusnetworks.com>
The vrf name comparison function was the same as the interface
comparison function. Combine the forces for the goodness of
mankind.
Ticket: CM-10184
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
There are cases where we get an interface name but do not have a
corresponding vrf. We care about getting an interface pointer
so just provide a function that searches all vrf's for the ifp.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Radhicak Mahankali <radhika@cumulusnetworks.com>
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Restrict interfaces on which IPv6 Router Advertisements are allowed. The list
excludes loopback interfaces including the VRF device interface; specific to
Cumulus, it also includes "switch0" and "ethX" interfaces.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Ticket: CM-9849
Reviewed By: CCR-4334
Testing Done: Manual
All daemons changed to flag an interface that has been moved to a vrf as DELETED instead of INTERNAL.
When they were flagged as IFINDEX_INTERNAL, ospf, rip, and isis would re-install them in the default
assuming that they were being "pre-defined" before the kernel definitions.
Ticket: CM-9265
Signed-off-by: Don Slice
Reviewed-by: Donald Sharp
Ticket:CM-9073
Reviewed By: sharpd
Testing Done:Manual, see ticket
Changed logic when "interface swpxx <vrf foo>" entered so that:
1. it matches when the command is entered without a vrf but the interface already exists in a vrf.
2. If the command is entered with a vrf name that is different than is defined by the kernel, the command is rejected.
3. If the call is made from other than the vty session, believe the new information and update the vrf accordingly.
Add the infrastructure to allow the vrf keyword.
Signed-off-by: Vipin Kumar <vipin@cumulusnetworks.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This Change modifies what zebra thinks is an unnumbered interface.
If the interface is not a loopback and the prefixlength for the
interface is 32 than consider this an unnumbered interface.
Ticket: CM-8016
Reviewed by: CCR-3827
Testing: Full Regression Suites
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Introduce a new command "interface IFNAME vrf N" to configure an
interface in the non-default VRF.
Till now, only zebra uses this command. Other daemons will install
the command when they support multiple VRFs.
Signed-off-by: Feng Lu <lu.feng@6wind.com>
Reviewed-by: Alain Ritoux <alain.ritoux@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Conflicts:
zebra/interface.c
An interface belongs to a specific VRF. So move the interface list
into the "struct vrf".
* vrf.c/vrf.h:
- add a new member "struct list *iflist" to the the "struct vrf";
- call if_init() in vrf_new();
- call if_terminate() in vrf_delete();
- add utilities to access the interface list and VRF ID in the
specified VRF.
* if.c/if.h:
- the global "iflist" now only exists for the default VRF;
- the global "if_master" is initialized on the definition;
- in if_create(), the interface is added into the list in the
specified VRF; if the VRF does not exist, create one;
- add parameters to if_init()/if_terminate() so that the
interface list in the VRF can be initialized/destroyed;
- in if_dump_all() scan the interfaces in all the VRFs;
- add a command "show address vrf N" to show addresses in a
specified VRF;
- add a command "show address vrf all" to show addresses in all
VRFs;
- new APIs ifxxx_vrf() are added to access an interface in a
specified VRF.
The old interface APIs (the global variable "iflist" and the API
functions) are not changed to keep the backward compatibility.
The new APIs are used in the daemons which support multiple VRFs
(till now only zebra).
Signed-off-by: Feng Lu <lu.feng@6wind.com>
Reviewed-by: Alain Ritoux <alain.ritoux@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Conflicts:
lib/if.c
Later, an interface will belong to a specific VRF. Now we add a
property "vrf_id" to the "struct interface", and keep it as the
default value 0.
This property is shown when displaying interfaces information.
It is also added in some logs.
This is just the preparation to move the interace list into the
"struct vrf". The main logic is not changed.
Signed-off-by: Feng Lu <lu.feng@6wind.com>
Reviewed-by: Alain Ritoux <alain.ritoux@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Conflicts:
lib/if.c
zebra/interface.c
Ticket:
Reviewed By: CCR-3335
Testing Done: bgpsmoke, ENHE tests etc.
Add support for filtering routes from upper layer protocols to zebra
via route-maps for IPv6. The same functionality already existed for
IPv4.
In addition, add support for setting source of routes via IPv6 protocol
map.
Signed-off-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Vivek Venkataraman <vivek@cumulusnetworks.com>
Reviewed-by: Vipin Kumar <vipin@cumulusnetworks.com>
Integrates Prescriptive Topology Module(ptm) into quagga.
If this module is enabled, link ups are notified only after the link is verified
as being connected to the neighbor specified. The neighbor specification and
checking is done by the ptm daemon.
This is implementing this part of RFC 2328:
This is the "first case", see below,
16.1.1. The next hop calculation
...
If there is at least one intervening router in the current
shortest path between the destination and the root, the
destination simply inherits the set of next hops from the
parent. Otherwise, there are two cases. In the first case,
the parent vertex is the root (the calculating router
itself). This means that the destination is either a
directly connected network or directly connected router.
The outgoing interface in this case is simply the OSPF
interface connecting to the destination network/router.
...
The current Quagga code always tries to inherit the nexthop from
a parent vertex, but does not cover the case that the destination
is directly connected to the root vertex. This patch adds support
for that case.
Signed-off-by: James Li <jli at cumulusnetworks.com>
Reviewed-by: Dinesh G Dutt <ddutt at cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
As there are timeframes when we don't get a notification from the kernel
about new addresses. (e.g. while Linux performs IPv6 DAD), we need to
have some information whether an address has been sent to the kernel or
not.
One case where this is relevant would be a user adding an IPv6 address,
but deleting it before DAD has been complete. With the next patch which
removes some (ill assuming) synchronous parts in address setup,
ipv6_address_uninstall would not know whether or not it has to actually
delete the prefix from the kernel. Resolving these windows where we lack
information is what the flag ZEBRA_IFC_QUEUED is intended for.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Quagga makes bad assumptions about sockaddr_dl (on NetBSD, but possibly
on other systems as well). Particularly, sizeof(struct sockaddr_dl)
returns a size that does not include the full sdl_data field, leading to
not enough data being copied. This breaks IPv6 RAs in particular, as
a broken mac address from sockaddr_dl will be included in the packets.
From: Matthias-Christian Ott <ott@mirix.org>
Tested-by: Uwe Toenjes <6bone@6bone.informatik.uni-leipzig.de>
[further simplified + more comments]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2007-05-09 Paul Jakma <paul.jakma@sun.com>
* configure.ac: sys/conf.h depends on sys/param.h, at least on
FBSD 6.2.
(bug #363) Should check for in_pktinfo for IRDP
2006-05-27 Paul Jakma <paul.jakma@sun.com>
* configure.ac: General cleanup of header and type checks, introducing
an internal define, QUAGGA_INCLUDES, to build up a list of
stuff to include so as to avoid 'present but cant be compiled'
warnings.
Misc additional checks of things missing according to autoscan.
Add LIBM, for bgpd's use of libm, so as to avoid burdening
LIBS, and all the binaries, with libm linkage.
Remove the bad practice of using m4 changequote(), just
quote the []'s in the case statements properly.
This should fix bugs 162, 303 and 178.
* */*.{c,h}: Update all HAVE_* to the standard autoconf namespaced
HAVE_* defines. I.e. HAVE_SA_LEN -> HAVE_STRUCT_SOCKADDR_SA_LEN,
* bgpd/Makefile.am: Add LIBM to bgpd's LDADD, for pow().
2006-12-12 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* if.h: (struct connected) Add new ZEBRA_IFA_PEER flag indicating
whether a peer address has been configured. Comment now shows
the new interpretation of the destination addr: if ZEBRA_IFA_PEER
is set, then it must contain the destination address, otherwise
it may contain the broadcast address or be NULL.
(CONNECTED_DEST_HOST,CONNECTED_POINTOPOINT_HOST) Remove obsolete
macros that were specific to IPv4 and not fully general.
(CONNECTED_PEER) New macro to check ZEBRA_IFA_PEER flag.
(CONNECTED_PREFIX) New macro giving the prefix to insert into
the RIB: if CONNECTED_PEER, then use the destination (peer) address,
else use the address field.
(CONNECTED_ID) New macro to come up with an identifying address
for the struct connected.
* if.c: (if_lookup_address, connected_lookup_address) Streamline
logic with new CONNECTED_PREFIX macro.
* prefix.h: (PREFIX_COPY_IPV4, PREFIX_COPY_IPV6) New macros
for better performance than the general prefix_copy function.
* zclient.c: (zebra_interface_address_read) For non-null destination
addresses, set prefixlen to equal the address prefixlen. This
is needed to get the new CONNECTED_PREFIX macro to work properly.
* connected.c: (connected_up_ipv4, connected_down_ipv4,
connected_up_ipv6, connected_down_ipv6) Simplify logic using the
new CONNECTED_PREFIX macro.
(connected_add_ipv4) Set prefixlen in destination addresses (required
by the CONNECTED_PREFIX macro). Use CONNECTED_PEER macro instead
of testing for IFF_POINTOPOINT. Delete invalid warning message.
Warn about cases where the ZEBRA_IFA_PEER is set but no
destination address has been supplied (and turn off the flag).
(connected_add_ipv6) Add new flags argument so callers may set
the ZEBRA_IFA_PEER flag. If peer/broadcast address satisfies
IN6_IS_ADDR_UNSPECIFIED, then reject it with a warning.
Set prefixlen in destination address so CONNECTED_PREFIX will work.
* connected.h: (connected_add_ipv6) Add new flags argument so
callers may set the ZEBRA_IFA_PEER flag.
* interface.c: (connected_dump_vty) Use CONNECTED_PEER macro
to decide whether the destination address is a peer or broadcast
address (instead of checking IFF_BROADCAST and IFF_POINTOPOINT).
* if_ioctl.c: (if_getaddrs) Instead of setting a peer address
only when the IFF_POINTOPOINT is set, we now accept a peer
address whenever it is available and not the same as the local
address. Otherwise (no peer address assigned), we check
for a broadcast address (regardless of the IFF_BROADCAST flag).
And must now pass a flags value of ZEBRA_IFA_PEER to
connected_add_ipv4 when a peer address is assigned.
The same new logic is used with the IPv6 code as well (and we
pass the new flags argument to connected_add_ipv6).
(if_get_addr) Do not bother to check IFF_POINTOPOINT: just
issue the SIOCGIFDSTADDR ioctl and see if we get back
a peer address not matching the local address (and set
the ZEBRA_IFA_PEER in that case). If there's no peer address,
try to grab SIOCGIFBRDADDR regardless of whether IFF_BROADCAST is set.
* if_ioctl_solaris.c: (if_get_addr) Just try the SIOCGLIFDSTADDR ioctl
without bothering to check the IFF_POINTOPOINT flag. And if
no peer address was found, just try the SIOCGLIFBRDADDR ioctl
without checking the IFF_BROADCAST flag. Call connected_add_ipv4
and connected_add_ipv6 with appropriate flags.
* if_proc.c: (ifaddr_proc_ipv6) Must pass new flags argument to
connected_add_ipv6.
* kernel_socket.c: (ifam_read) Must pass new flags argument to
connected_add_ipv6.
* rt_netlink.c: (netlink_interface_addr) Copy logic from iproute2
to determine local and possible peer address (so there's no longer
a test for IFF_POINTOPOINT). Set ZEBRA_IFA_PEER flag appropriately.
Pass new flags argument to connected_add_ipv6.
(netlink_address) Test !CONNECTED_PEER instead of if_is_broadcast
to determine whether the connected destination address is a
broadcast address.
* bgp_nexthop.c: (bgp_connected_add, bgp_connected_delete)
Simplify logic by using new CONNECTED_PREFIX macro.
* ospf_interface.c: (ospf_if_is_configured, ospf_if_lookup_by_prefix,
ospf_if_lookup_recv_if) Simplify logic using new CONNECTED_PREFIX
macro.
* ospf_lsa.c: (lsa_link_ptop_set) Using the new CONNECTED_PREFIX
macro, both options collapse into the same code.
* ospf_snmp.c: (ospf_snmp_if_update) Simplify logic using new
CONNECTED_ID macro.
(ospf_snmp_is_if_have_addr) Simplify logic using new CONNECTED_PREFIX
macro.
* ospf_vty.c: (show_ip_ospf_interface_sub) Use new CONNECTED_PEER macro
instead of testing the IFF_POINTOPOINT flag.
* ospfd.c: (ospf_network_match_iface) Use new CONNECTED_PEER macro
instead of testing with if_is_pointopoint. And add commented-out
code to implement alternative (in my opinion) more elegant behavior
that has no special-case treatment for PtP addresses.
(ospf_network_run) Use new CONNECTED_ID macro to simplify logic.
* rip_interface.c: (rip_interface_multicast_set) Use new CONNECTED_ID
macro to simplify logic.
(rip_request_interface_send) Fix minor bug: ipv4_broadcast_addr does
not give a useful result if prefixlen is 32 (we require a peer
address in such cases).
* ripd.c: (rip_update_interface) Fix same bug as above.
2006-05-21 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* if.h: (struct connected) Document the meaning of the
ZEBRA_IFC_REAL and ZEBRA_IFC_CONFIGURED flags.
* connected.c: (connected_withdraw) Do not delete the connected
address if the ZEBRA_IFC_CONFIGURED flag is set.
(connected_add_ipv4,connected_add_ipv6) Before calling
connected_withdraw, unset the ZEBRA_IFC_CONFIGURED flag
on the superseded connected structure.
2006-01-11 Paul Jakma <paul.jakma@sun.com>
* if.h: (struct interface) expand flags to 8 bytes.
* zclient.c: (zebra_interface_{add,state}_read) stream read of
interface flags now need to use stream_getq.
(zebra_interface_if_set_value) ditto
2006-01-11 Paul Jakma <paul.jakma@sun.com>
* zserv.c: (zsend_interface_{add,delete,update}) if flags are
8 bytes now, update to write out with stream_putq.
* (general) extern and static'ification of functions in code and
header.
Cleanup any definitions with unspecified arguments.
Add casts for callback assignments where the callback is defined,
typically, as passing void *, but the function being assigned has
some other pointer type defined as its argument, as gcc complains
about casts from void * to X* via function arguments.
Fix some old K&R style function argument definitions.
Add noreturn gcc attribute to some functions, as appropriate.
Add unused gcc attribute to some functions (eg ones meant to help
while debugging)
Add guard defines to headers which were missing them.
* command.c: (install_node) add const qualifier, still doesnt shut
up the warning though, because of the double pointer.
(cmp_node) ditto
* keychain.c: (key_str2time) Add GET_LONG_RANGE() macro, derived
fromn vty.h ones to fix some of the (long) < 0 warnings.
* thread.c: (various) use thread_empty
(cpu_record_hash_key) should cast to uintptr_t, a stdint.h type
* vty.h: Add VTY_GET_IPV4_ADDRESS and VTY_GET_IPV4_PREFIX so they
removed from ospfd/ospf_vty.h
* zebra.h: Move definition of ZEBRA_PORT to here, to remove
dependence of lib on zebra/zserv.h
* if_ioctl.c: (interface_list_ioctl) Use if_get_by_name_len.
* if_proc.c: (ifaddr_proc_ipv6) Increase size of ifname buffer to
avoid overflow.
* kernel_socket.c: (ifan_read) Use if_get_by_name_len.
* if.h: Fix comments to reflect that if_lookup_by_name and
if_get_by_name now require the argument strings to be NUL-terminated.
* if.c: (if_lookup_by_name) Compare using strcmp.
(if_get_by_name) Pass strlen(ifname) as 2nd arg to if_create.
* if.h: (if_lookup_by_name_len, if_get_by_name_len) New functions.
* if.c: (if_lookup_by_name_len, if_get_by_name_len) New functions.
(if_get_by_name) Tighten up code.
(interface) Use new function if_get_by_name_len.
* zclient.c: (zebra_interface_add_read) Use new if_get_by_name_len
function.
(zebra_interface_state_read) Use new if_lookup_by_name_len function.
* kernel_socket.c: (ifm_read) Use new if_lookup_by_name_len function
to save a memcpy.
* if_ioctl_solaris.c: (interface_list_ioctl) Fix subtle bug with new
if_get_by_name_len function.
* ospf_interface.c: (ospf_vl_new) Use strnlen to fix call to if_create.
Fix problems when netlink interfaces are renamed (same ifindex used
for a new interface). Start cleaning up some problems with the way
interface names are handled.
* interface.c: (if_new_intern_ifindex) Remove obsolete function.
(if_delete_update) After distributing the interface deletion message,
set ifp->ifindex to IFINDEX_INTERNAL.
(if_dump_vty) Detect pseudo interface by checking if ifp->ifindex is
IFINDEX_INTERNAL.
(zebra_interface) Check return code from interface_cmd.func.
Do not set internal ifindex values to if_new_intern_ifindex(),
since we now use IFINDEX_INTERNAL for all pseudo interfaces.
* kernel_socket.c: (ifm_read) Fix code and comments to reflect that
all internal interfaces now have ifp->ifindex set to IFINDEX_INTERNAL.
* rt_netlink.c: (set_ifindex) New function used to update ifp->ifindex.
Detects interface rename events by checking if that ifindex is already
being used. If it is, delete the old interface before assigning
the ifindex to the new interface.
(netlink_interface, netlink_link_change) Call set_ifindex to update
the ifindex.
* if.h: Remove define for IFINDEX_INTERNBASE and add define
IFINDEX_INTERNAL 0, since all internal (i.e. non-kernel) pseudo-
interfaces should have ifindex set to 0.
(if_new) Remove function.
(if_delete_retain) New function to delete an interface without
removing from iflist and freeing the structure.
(ifname2ifindex) New function.
* if.c: (if_new) Remove function (absorb into if_create).
(if_create) Replace function if_new with call to calloc.
Set ifp->ifindex to IFINDEX_INTERNAL. Fix off-by-one error
in assert to check length of interface name. Add error message
if interface with this name already exists.
(if_delete_retain) New function to delete an interface without
removing from iflist and freeing the structure.
(if_delete) Implement with help of if_delete_retain.
(ifindex2ifname) Reimplement using if_lookup_by_index.
(ifname2ifindex) New function to complement ifindex2ifname.
(interface) The interface command should check the name length
and fail with a warning message if it is too long.
(no_interface) Fix spelling in warning message.
(if_nametoindex) Reimplement using if_lookup_by_name.
(if_indextoname, ifaddr_ipv4_lookup) Reimplement using
if_lookup_by_index.
* bgp_zebra.c: (bgp_interface_delete) After deleting, set ifp->ifindex
to IFINDEX_INTERNAL.
* isis_zebra.c: (isis_zebra_if_del) Call if_delete_retain instead
of if_delete, since it is generally not safe to remove interface
structures. After deleting, set ifp->ifindex to IFINDEX_INTERNAL.
(zebra_interface_if_lookup) Tighten up code.
* ospf6_zebra.c: (ospf6_zebra_if_del) Previously, this whole function
was commented out. But this is not safe: we should at least update
the ifindex when the interface is deleted. So the new version
updates the interface status and sets ifp->ifindex to
IFINDEX_INTERNAL.
(ospf6_zebra_route_update) Use if_indextoname properly.
* ospf_vty.c: (show_ip_ospf_interface_sub) Show ifindex and interface
flags to help with debugging.
* ospf_zebra.c: (ospf_interface_delete) After deleting, set ifp->ifindex
to IFINDEX_INTERNAL.
(zebra_interface_if_lookup) Make function static. Tighten up code.
* rip_interface.c: (rip_interface_delete) After deleting, set
ifp->ifindex to IFINDEX_INTERNAL.
* ripng_interface.c: (ripng_interface_delete) After deleting, set
ifp->ifindex to IFINDEX_INTERNAL.
* ospf_packet.c: (ospf_read) Fix bug: must check for state ISM_Down,
not for event ISM_InterfaceDown. And improve the message by
adding the interface flags.
* if.h: Declare if_flag_dump.
[backport candidate]
