LDP ordered label distribution control only binds a label to
a FEC if it is the egress LSR, or the router received a label
binding for a FEC from the next hop router. In this mode,
an MPLS router will create a label binding for each FEC and
distribute it to its neighbors so long as he has a entry in
the RIB for the destination.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
Signed-off-by: Karen Schoener <karen@voltanet.io>
this command is missing, compared with 'match ipv6 next-hop' command
available. Adding it by taking into account the backward compatible
effect when supposing that some people have configured acls with name
being an ipv4 address.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Add a bit of debug to show the listener sockets and who created them
to associate with strace output for a developer.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When pim receives a register packet, we will apply the
received source to the prefix list. If accepted normal
processing continues. If denied we will send a register
stop message to the source.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Change the overview page's link for slack info to point to
the main FRR homepage section - that's where the self-serve
link/info is.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
This directive was undocumented, but is the way to configure the
next-hop to be left unchanged for ipv6 setups (in ipv4, a route-map with
`set next-hop unchanged` works fine, but this is unavailable for ipv6) .
Signed-off-by: Raphael Bauduin <rb@raphinou.com>
First round of support for exercising the lsp and ftn paths
using sharpd. This supports lsp-only, and binding to
ipv4 prefix. Also use the common lib nexthop-to-zapi
helper api instead of sharpd's open-coded version.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The commit includes the documentation for the newly introduced
commands to enable/disable the optimization.
Signed-off-by: NaveenThanikachalam <nthanikachal@vmware.com>
1. show ip pim mlag summary
provides MLAG session information and stats
2. show ip pim mlag upstream
displays the upstream entries synced across the MLAG switches
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Indicate in the doc clearly that we do not support the dynamic
creation of pbr maps for sub-interfaces when the master has
an interface. Such as in vlans. It must be explicitly added.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add a 'copy' cli that reads a file into the current running
config. Add an entry about the new cli to the user doc.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
This change list contains the documentation of BGP Greacful Restart
feature and all the commnads to enable/disable the feature
Signed-off-by: Biswajit Sadhu <sadhub@vmware.com>
The FRR community keeps getting asked about what is supported or not.
Try to clarify in an additional spot what is and what is not supported.
Where people interested in using PIM might have a chance at actually
seeing the notification.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The bgp neighbor password command was not documented additionally
the fact that you may need to instruct the kernel to have more
memory available for tcp sockets when using this feature on a large
number of peers.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Provide a more succinct summary of what FRR is, what it does, where it
sits in the network stack. Also remove some outdated comments about
features.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
router-id is buried deep in "show running-config", this new
command makes it easy to retrieve the user configured router-id.
Example:
# configure terminal
(config)# router-id 1.2.3.4
(config)# end
# show router-id
router-id 1.2.3.4
# configure terminal
(config)# no router-id 1.2.3.4
(config)# end
# show router-id
#
Signed-off-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
Allow 'ip igmp join' to join group for any source if no source is
specified.
Disallow joining source "0.0.0.0" as it is used to define an
any-source multicast group.
Signed-off-by: Liam McBirnie <liam.mcbirnie@boeing.com>
doc/user/bgp.rst:420: WARNING: Title underline too short.
Reject routes with AS_SET or AS_CONFED_SET types
-------------------------------
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Add support for labelled nexthops in nexthop-group
vtysh configuration. Also update the PBR doc where
the cli is described.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Problem reported by testing facility that our sending of Router
Advertisements more frequently than once very three seconds is not
compliant with rfc4861. Added a knob to turn off fast retransmits
in order to meet the requirement of the RFC.
Ticket: CM-27063
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
`set vrf NAME` allows the pbr map to point to an arbitrary vrf table.
`set vrf unchanged` will use the interface's vrf for table lookup.
Further, add functionality for pbr to respond to interface events
such as interface vrf changes & interface creation/deletion.
Ex)
ubuntu_nh# show pbr map
pbr-map TEST valid: 1
Seq: 1 rule: 300 Installed: 3(1) Reason: Valid
SRC Match: 3.3.3.3/32
VRF Unchanged (use interface vrf)
pbr-map TEST2 valid: 1
Seq: 2 rule: 301 Installed: 3(2) Reason: Valid
SRC Match: 4.4.4.4/32
VRF Lookup: vrf-red
root@ubuntu_nh:/home# ip rule show
0: from all lookup local
300: from 3.3.3.3 iif dummy2 lookup main
300: from 3.3.3.3 iif dummyVRF lookup 1111
301: from 4.4.4.4 iif dummy1 lookup 1111
301: from 4.4.4.4 iif dummy3 lookup 1111
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com-
Add some doc information for the new nexthop group commands. Also
had to add some for ones that were missing, which we are adding
additional commands to.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
getrusage, in a heavily stressed system, can account for
signficant running time due to process switching to the kernel.
Allow the end-operator to specify `--disable-cpu-time` to
avoid this call. Additionally we cause `show thread cpu` to
not show up if this is selected.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
