Always free the locally allocated attribute not the one we are using for
return. This fixes a memory leak and a crash when AS Path is set with
route-map.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Currently the Wait for Install code ( bgp_suppress_fib ) does
not properly handle two states from zebra: ROUTE_INSTALL_FAILED
and BETTER_ADMIN_DISTANCE_WON. Pre this change the WFI code
would just never notify our peers about a route install failure
but more is needed. In the ROUTE_INSTALL_FAILED and the
BETTER_ADMIN_DISTANCE_WON we need to notify our peers with
a withdrawal about the route, else we will continue to
draw traffic to us when we cannot legally do so.
Why is this needed? In either case imagine that we've already
received a bgp route, installed it and sent to our peers.
In the Better admin distance won case, say a static route is installed
at this point in time we must stop advertising the route through
us since we are not installed. As such a withdrawal must be sent.
In the ROUTE_INSTALL_FAILED case, the code was not properly handling
the situation where we have Route A, it was successfully installed
and then we received a update to Route A that was attempted to be
installed but failed. In this case we also need to send a withdrawal
Finally update the bgp_suppress_fib topotest to test both of these
situations.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Don't hide the LABELED_UNICAST safi when processing route
updates; map it where necessary (to use the UNICAST table
for instance).
Signed-off-by: Mark Stapp <mstapp@nvidia.com>
Move the "longer-prefixes" option from show_ip_bgp_cmd to
show_ip_bgp_json_cmd so that is has access to JSON output.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Move the "route-map" option from show_ip_bgp_cmd to
show_ip_bgp_json_cmd so that is has access to JSON output.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Move the "filter-list" option from show_ip_bgp_cmd to
show_ip_bgp_json_cmd so that is has access to JSON output.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Move the "prefix-list" option from show_ip_bgp_cmd to
show_ip_bgp_json_cmd so that is has access to JSON output.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Move the "community-list" option from show_ip_bgp_cmd to
show_ip_bgp_json_cmd so that is has access to JSON output.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
There's no need to have different calls to bgp_show() when the only
difference is one argument that corresponds to a "void *" parameter.
Code duplication should be reduced to a minimum to avoid bugs like
the one fixed in the previous commit.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Like done in the other places (when "all" isn't used), pass the
actual alias name to bgp_show() instead of a null pointer.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
add a parameter to resolver api that is the vrf identifier. this permits
to make resolution self to each vrf. in case vrf netns backend is used,
this is very practical, since resolution can happen on one netns, while
it is not the case in an other one.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Since f60a1188 we store a pointer to the VRF in the interface structure.
There's no need anymore to store a separate vrf_id field.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
For IPv4 matching, we have "match ip next-hop address A.B.C.D".
For IPv6 matching, we have "match ipv6 next-hop X:X::X:X".
To have consistency, let's add "address" keyword to IPv6 commands.
Old commands are preserved as hidden for backward compatibility.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Description:
EVPN routes marked as imported routes,
having bgp path info's extra, where as
they are not truly imported routes,
so original bgp info will be null.
Co-authored-by: Kantesh Mundaragi <kmundaragi@vmware.com>
Signed-off-by: Iqra Siddiqui <imujeebsiddi@vmware.com>
Description:
Added a macro which optimises some part of the code.
Co-authored-by: Santosh P K <sapk@vmware.com>
Co-authored-by: Kantesh Mundaragi <kmundaragi@vmware.com>
Signed-off-by: Iqra Siddiqui <imujeebsiddi@vmware.com>
Description:
Incorrect behavior during best path selection for the imported routes.
Imported routes are always treated as eBGP routes.
Change is intended for fixing the issues related to
bgp best path selection for leaked routes:
- FRR does ecmp for the imported routes,
even without any ecmp related config.
If the same prefix is imported from two different VRFs,
then we configure the route with ecmp even without
any ecmp related config.
- Locally imported routes are preferred over imported
eBGP routes.
If there is a local route and eBGP learned route
for the same prefix, if we import both the routes,
imported local route is selected as best path.
- Same route is imported from multiple tenant VRFs,
both imported routes point to the same VRF in nexthop.
- When the same route with same nexthop in two different VRFs
is imported from those two VRFs, route is not installed as ecmp,
even though we had ecmp config.
- During best path selection, while comparing the paths for imported routes,
we should correctly refer to the original route i.e. the ultimate path.
- When the same route is imported from multiple VRF,
use the correct VRF while installing in the FIB.
- When same route is imported from two different tenant VRFs,
while comparing bgp path info as part of bgp best path selection,
we should ideally also compare corresponding VRFs.
See-also: https://github.com/FRRouting/frr/files/7169555/FRR.and.Cisco.VRF-Lite.Behaviour.pdf
Co-authored-by: Santosh P K <sapk@vmware.com>
Co-authored-by: Kantesh Mundaragi <kmundaragi@vmware.com>
Signed-off-by: Iqra Siddiqui <imujeebsiddi@vmware.com>
