Trivial conversion.
rip->default_metric was converted to an uint8_t to match the way it's
defined in the YANG module.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Trivial conversion.
'rip->default_information_route_map' was removed since it wasn't being
used anywhere.
'rip->default_information' was removed too because it was being used only
to display the running configuration and thus is not necessary anymore.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Trivial conversion. The rip->ecmp variable was converted to a boolean to
match the way it's defined in the YANG module.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
* Implement the northbound callbacks associated to the
'/frr-ripd:ripd/instance' YANG path (the code is mostly a copy and paste
from the original "router rip" DEFUNs);
* Move rip_create_socket() out of rip_create() since creating a socket
is an error-prone operation and thus needs to be performed separately
during the NB_EV_PREPARE phase;
* On rip_create(), fetch the defaults from the frr-ripd YANG model;
* Convert the "[no] router rip" CLI commands to be dumb wrappers around
the northbound callbacks;
* On config_write_rip(), write logic to call all 'cli_show' northbound
callbacks defined under the '/frr-ripd:ripd/instance' YANG path.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Introduce frr-ripd.yang, which defines a model for managing the FRR
ripd daemon. Also add frr-route-types.yang which defines typedefs for
FRR route types.
Update the 'frr_yang_module_info' array of ripd with the new 'frr-ripd'
module.
Add two new files (rip_cli.[ch]) which should contain all ripd commands
converted to the new northbound model. Centralizing all commands in a
single place will facilitate the process of moving the CLI to a separate
program in the future.
Add automatically generated stub callbacks in rip_northbound.c. These
callbacks will be implemented gradually in the following commits.
Add example JSON/XML ripd configurations in yang/examples/.
Add the confd.frr-ripd.yang YANG module with annotations specific to
the ConfD daemon.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Introduce frr-interface.yang, which defines a model for managing FRR
interfaces.
Update the 'frr_yang_module_info' array of all daemons that will
implement this module.
Add automatically generated stub callbacks in if.c. These callbacks will
be implemented in the following commit.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
FRR_DAEMON_INFO should now contain an array of 'frr_yang_module_info'
structures describing the YANG modules implemented by the daemon.
This array will be used by frr_init() function to load all YANG modules
and initialize the northbound callbacks during the daemon initialization.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
We had a variety of issues with sorted list compare functions.
This commit identifies and fixes these issues.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Since we're now building through one large Makefile, we can easily put
things with their daemons and crossreference nicely.
Signed-off-by: David Lamparter <equinox@diac24.net>
The Vrf aliases can be known with a specific hook. That hook will then,
from zebra propagate the information to the relevant zapi clients.
The registration hook function is the same for all daemons.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
* Use the correct license header
* Stop headers from including themselves
* Use uniform relative include conventions
* Ensure that sources include what they use
* Turn off clang-format around struct array blocks
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
There is no need to check for failure of a ALLOC call
as that any failure to do so will result in a assert
happening. So we can safely remove all of this code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
fix a bug when sending packets.
in authenticate mode but without any string,
no packet should send.
Signed-off-by: lyq140 <34637052+lyq140@users.noreply.github.com>
fix a bug when sending a rip packet.
in authenticate mode but without any string,
no packet should send.
Signed-off-by: lyq140 <34637052+lyq140@users.noreply.github.com>
Fix ripd crash of null pointer.
when authenticate a rip packet,
the key pointer or the key string pointer may be null,
the code have to return then.
Signed-off-by: lyq140 <34637052+lyq140@users.noreply.github.com>
This fix a crash of null pointer.
when we don't add a key string or delete it,
the key is not null but key string is null,
so the code have to return.
Signed-off-by: lyq140 <34637052+lyq140@users.noreply.github.com>
During code inspection it was noticed that rip is not fully
using FRR memory code as it should.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Coverity SA has noticed that we are not ignoring the return
codes from rip_send_packet in one case. Since we do not care
let the system know we don't.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Programs that link to libnetsnmp must be compiled using a special set
of flags as specified by the "net-snmp-config --base-cflags" command
(whose output is stored in the SNMP_CFLAGS variable). The problem is
that "net-snmp-config --base-cflags" can output -std=c99 in addition to
other compiler flags in some platforms, and this breaks the build since
FRR souce code makes use of some GNU compiler extensions (e.g. allow
trailing commas in function parameter lists). In order to solve this
problem, append -std=gnu99 after SNMP_CFLAGS in all makefiles where this
variable is used. This way the -std=c99 flag will be overwritten when it's
present. Source files that don't link to libnetsnmp will be compiled using
either -std=gnu99 or -std=gnu11 depending on the compiler availability.
Fixes#1617.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This option is only implemented by 4 daemons:
- BGPD
- RIPD
- RIPNGD
- Zebra
Manpages and documentation say that the option causes routes to not be
uninstalled from zebra when the daemon terminates. This is true for RIPD
and RIPNGD. This is not true for BGPD; in that daemon it only prevents
transmission of Cease / Peer Unconfig NOTIFICATION messages to peers.
Moreover, when any daemon disconnects from Zebra, all of its routes are
uninstalled from Zebra and the kernel regardless of this option,
rendering the option largely vestigial.
It is still useful in Zebra, where it prevents all routes from being
uninstalled when Zebra shuts down, so it is left there.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
rn cannot be null here
issue detected by cppcheck:
[ripd/rip_snmp.c:208] -> [ripd/rip_snmp.c:207]: (warning) Either the condition
'if(rn&&!strncmp(i->name,ifp->name,INTERFACE_NAMSIZ))' is redundant or there is
possible null pointer dereference: rn.
Signed-off-by: Ilya Shipitsin <chipitsine@gmail.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This commit fixes these three issues:
1) rinfo is used for rip packet sending not tmp_rinfo
2) With RIP_SPLIT_HORIZON and an interface with more than 1 ip addresses
we will not send the routes out an interface that they originate on
3) With RIP_SPLIT_HORIZON_POISONED_REVERSE and an interface with
more than 1 ip address we will not send out ipA with a metric of 16
and ipb with a metric of 1. Both will be 16 now.
Signed-off-by: lyq140 <34637052+lyq140@users.noreply.github.com>
The code was attempting to access a variable that would always be NULL.
In fact this code has been broken since the rip ECMP changes
were put into place a few years back.
I'm going to come straight out and say that I don't fully
understand this code. rinfo is the first item in the ecmp
list and tmp_rinfo is used to iterate over all the items
in the ecmp list. It sure looks like that the changes
made here were just hacked together. So I modified
the tmp_rinfo loop to just work on tmp_rinfo and
the check that was crashing I modified to just use
the rinfo since that what was checked originally
in code before the ECMP was added. So consider
this a hack job to stop the crashing.
I think worse case is that we might be sending some routes
back out interfaces it shouldn't be if you have
ip rip split-horizon poisoned-reverse configured but
that is less bad(tm) than crashing.
Fixes: #1717
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The $Id: lines would allow code kept in cvs to substitute
the file version upon checkout. Since we are not using
cvs there is no need to keep these lines anymore.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Allow the higher level protocol to specify if it would
like to receive notifications about it's routes that
it has installed.
I've purposely made it part of zclient_new_notify because
we need to track the routes on a per daemon basis only.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The rinfo variable was being set but never used.
We just need to call rip_ecmp_replace or rip_ecmp_add
this function does not care about the return values
because the rinfo returned is stored on the rip
route entry.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Allow rip_redistribute_add to receive and properly store
the nexthop type passed up from zebra.
Additionally display the different nexthop types appropriately.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
RIP is not using the nexthop data structure and as such when
it does not fully understand when it receives some of the
more exotic nexthop types what to do with it. This is the
start of a series of commits to allow RIP to start understanding
and properly displaying information about different nexthop
types.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This improves code readability and also future-proofs our codebase
against new changes in the data structure used to store interfaces.
The FOR_ALL_INTERFACES_ADDRESSES macro was also moved to lib/ but
for now only babeld is using it.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Performance tests showed that, when running on a system with a large
number of interfaces, some daemons would spend a considerable amount
of time in the if_lookup_by_index() function. Introduce a new rb-tree
to solve this problem.
With this change, we need to use the if_set_index() function whenever
we want to change the ifindex of an interface. This is necessary to
ensure that the 'ifaces_by_index' rb-tree is updated accordingly. The
return value of all insert/remove operations in the interface rb-trees
is checked to ensure that an error is logged if a corruption is
detected.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
IFINDEX_DELETED is not necessary anymore as we moved from a global
list of interfaces to a list of interfaces per VRF.
This reverts commit 84361d615.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is an important optimization for users running FRR on systems with
a large number of interfaces (e.g. thousands of tunnels). Red-black
trees scale much better than sorted linked-lists and also store the
elements in an ordered way (contrary to hash tables).
This is a big patch but the interesting bits are all in lib/if.[ch].
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Incomplete commands like "debug ospf6 route mem" were being ignored. The
changes in ripd and ripngd are intended to make the code easier to read,
no bugs were fixed in these two daemons.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
list_free is occassionally being used to delete the
list and accidently not deleting all the nodes.
We keep running across this usage pattern. Let's
remove the temptation and only allow list_delete
to handle list deletion.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Convert the list_delete(struct list *) function to use
struct list **. This is to allow the list pointer to be nulled.
I keep running into uses of this list_delete function where we
forget to set the returned pointer to NULL and attempt to use
it and then experience a crash, usually after the developer
has long since left the building.
Let's make the api explicit in it setting the list pointer
to null.
Cynical Prediction: This code will expose a attempt
to use the NULL'ed list pointer in some obscure bit
of code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This is a fallout from PR #1022 (zapi consolidation). In the early days,
the client daemons would allocate enough memory to send all nexthops
to zebra. Then zebra would add all nexthops to the RIB and respect
MULTIPATH_NUM only when installing the routes in the kernel. Now things
are different and the client daemons can send at most MULTIPATH_NUM
nexthops to zebra, and failure to respect that will result in a buffer
overflow. The MULTIPATH_NUM limit in the new zebra API is a small price
we pay to avoid allocating memory for each route sent to zebra.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
RIP is testing to ensure that the metric returned
isn't negative. We should be looking at the returned
value from the cli strtol.
If we get a metric value that is less than zero that
means that we shouldn't use this value in RIP currently.
So signify that by returning mod here.
Fixes: #1107
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
If the user configures some command that is already in the config we
should return CMD_WARNING instead of CMD_WARNING_CONFIG_FAILED
There are a variety of cli's associated with the
'set metric ...' command. The problem that we
are experiencing is that not all the daemons
support all the varieties of the set metric
and the returned of NULL during the XXX_compile
phase for these unsupported commands is causing
issues. Modify the code base to only return
NULL if we encounter a true parsing issue.
Else we need to keep track if this metric
applies to us or not.
In the case of rip or ripngd if the metric
passed to us is greater than 16 just turn
it internally into a MAX_METRIC.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Using the previously-added vty_frame() support, this gets rid of all the
pointless empty "interface XYZ" blocks that get added for any interface
that shows up in the system (e.g. dummys, tunnels, etc.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Some differences compared to the old API:
* Now the redistributed routes are sent using address-family
independent messages (ZEBRA_REDISTRIBUTE_ROUTE_ADD and
ZEBRA_REDISTRIBUTE_ROUTE_DEL). This allows us to unify the ipv4/ipv6
zclient callbacks in the client daemons and thus remove a lot of
duplicate code;
* Now zebra sends all nexthops of the redistributed routes to the client
daemons, not only the first one. This shouldn't have any noticeable
performance implications and will allow us to remove an ugly exception
we had for ldpd (which needs to know all nexthops of the redistributed
routes). The other client daemons can simply ignore the nexthops if
they want or consult just the first one (e.g. ospfd/ospf6d/ripd/ripngd).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This allows modules to register their own additional hooks on interface
creation/deletion.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The defines:
ONE_DAY_SECOND
ONE_WEEK_SECOND
ONE_YEAR_SECOND
were being defined all over the system, move the
define to a central location.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This reverts commit c14777c6bf.
clang 5 is not widely available enough for people to indent with. This
is particularly problematic when rebasing/adjusting branches.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
This allows frr-reload.py (or anything else that scripts via vtysh)
to know if the vtysh command worked or hit an error.
