An UPDATE message that contains the AS number of zero in the AS_PATH
or AGGREGATOR attribute MUST be considered as malformed and be
handled by the procedures specified in [RFC7606].
An UPDATE message with a malformed AGGREGATOR attribute SHALL be
handled using the approach of "attribute discard".
Attribute discard: In this approach, the malformed attribute MUST
be discarded and the UPDATE message continues to be processed.
This approach MUST NOT be used except in the case of an attribute
that has no effect on route selection or installation.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
the old VXLAN function for local MAC deletion was still in
existence and being called from the VXLAN code whilst the new
generic function was not being called at all. Resolve this so
the generic function matches the old function and is called
exclusively.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
This didn't exist yet when the xref code came around, and since
frrtrace() gets collapsed to nothing by the preprocessor when
tracepoints are disabled, it didn't cause any compiler errors...
Signed-off-by: David Lamparter <equinox@diac24.net>
gcc fucks up global variables with section attributes when they're used
in templated C++ code. The template instantiation "magic" kinda breaks
down (it's implemented through COMDAT in the linker, which clashes with
the section attribute.)
The workaround provides full runtime functionality, but the xref
extraction tool (xrelfo.py) won't work on C++ code compiled by GCC.
FWIW, clang gets this right.
Signed-off-by: David Lamparter <equinox@diac24.net>
Description:
clear ip bgp dampening was not triggering the route
calculation for the prefix, Due to this prefix are not install in
RIB(Zebra) and not adv to neighbor
Problem Description/Summary :
clear ip bgp dampening was not triggering the route
calculation for the prefix, Due to this prefix are not install in
RIB(Zebra) and not adv to neighbor
Fix: When clear ip bgp dampening, route are put for route-calculation as
that it is install in the Zebra and adv to neighbor.
Signed-off-by: sudhanshukumar22 <sudhanshu.kumar@broadcom.com>
Description:
When user is config connect timer, it doesn't reflect
immediately. It reflect when next time neighbor is tried to reconnect.
Problem Description/Summary :
When user is config connect timer, it doesn't reflect
The network connection was aborted by the local system.d to reconnect.
Fix is to update the connect timer immediately if BGP
session is not in establish state.
Expected Behavior :
If neighbor is not yet established, we should immediately apply the config connect timer to the peer.
Signed-off-by: sudhanshukumar22 <sudhanshu.kumar@broadcom.com>
The old bgpTraps group was obsolteted by RFC4273 and the
bgpNotifications groups was introduces. The new notifications
mirror the bgpTraps except that an extra item peerRemoteAddr
is sent in the notification. This upgrades the support to
conform with RFC4273
Signed-off-by: Pat Ruddy <pat@voltanet.io>
The function smux_trap only allows the paaasin of one index which is
applied to all indexed objects. However there is a requirement for
differently indexed objects within a singe trap. This commit
introduces a new function smux_trap_multi_index which can be called
with an array of indices. If this array is onf length 1 the original
smux_trap behaviour is maintained. smux_trap now calls the new
function with and index array length of 1 to avoid changes to
existing callers.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
Add defines for IANA SNMP routing protocol values
Add macro for returning an IPv6 address to the SNMP agent.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
Add if_vrf_lookup_by_index_next to get the next ifindex in a vrf
given the previous ifindex or 0 for the first.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
Add SNMP support for L3vpn Vrf table as defined in [RFC4382]
Keep track of vrf status for the table and for future traps.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
If a vrf is exporting to a vpn table and/or importing to a vpn
table then it is assumed t be a MPLS VPN vrf.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
From RFC4382:
A VRF is
up(1) when there is at least one interface associated
with the VRF whose ifOperStatus is up(1). A VRF is
down(2) when:
a. There does not exist at least one interface whose
ifOperStatus is up(1).
b. There are no interfaces associated with the VRF.
Run through interfaces associated with a vrf and return
true if there is one in the up state.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
Run through the vrf's interface list and return a count, skipping
the l3mdev which has a name which matches the vrf name.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
When adjacencies change state the attached-bits in LSPs in other areas
on the router may need to be modified.
1. If a router no longer has a L2 adjacency to another area the
attached-bit must no longer be sent in the LSP
2. If a new L2 adjacency comes up in a different area then the
attached-bit should be sent in the LSP
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
Move the pbr hash creation to be after the update release
and dplane install. Now that rules are installed in a separate
dplane pthread, we can have scenarios where we have an interface
flapping and we install/remove rules sufficiently fast enough we
could issue what we think is an update for an identical rule and
end up releasing the rule right after we created it and sent it to
the dplane. This solves the problem of recving duplicate rules
during interface flapping.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Only handle an interface update in the nexthop tracking code
if the nexthop in question was set with an interface to point
out of. If the nexthop is GW only, the interface update could
be unrelated but have overlapping address space. Let that be
handled elsewhere.
Ex)
```
5.5.5.0/30 dev dummyDoof proto kernel scope link src 5.5.5.1
5.5.5.0/24 dev goofDummy proto kernel scope link src 5.5.5.1
[root@alfred frr-2]# ip ro show table 10000
default via 5.5.5.2 dev dummyDoof proto pbr metric 20
[root@alfred frr-2]# ip link set goofDummy down
[root@alfred frr-2]# ip ro show table 10000
[root@alfred frr-2]# ip link set goofDummy up
[root@alfred frr-2]# ip ro show table 10000
```
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Add a test for the infinite recursion case fixed
with 0c4dbb5f8fe8fb188fa0e0aa8ce04764e893b79b
See that commit for details of the problem. This test uses a simpler
version of the repro found there as the test.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Disallow the resolution to nexthops that are marked duplicate.
When we are resolving to an ecmp group, it's possible this
group has duplicates.
I found this when I hit a bug where we can have groups resolving
to each other and cause the resolved->next->next pointer to increase
exponentially. Sufficiently large ecmp and zebra will grind to a hault.
Like so:
```
D> 4.4.4.14/32 [150/0] via 1.1.1.1 (recursive), weight 1, 00:00:02
* via 1.1.1.1, dummy1 onlink, weight 1, 00:00:02
via 4.4.4.1 (recursive), weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 4.4.4.2 (recursive), weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 4.4.4.3 (recursive), weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 4.4.4.4 (recursive), weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 4.4.4.5 (recursive), weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 4.4.4.6 (recursive), weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 4.4.4.7 (recursive), weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 4.4.4.8 (recursive), weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 4.4.4.9 (recursive), weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 4.4.4.10 (recursive), weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 4.4.4.11 (recursive), weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 4.4.4.12 (recursive), weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 4.4.4.13 (recursive), weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 4.4.4.15 (recursive), weight 1, 00:00:02
via 1.1.1.1, dummy1 onlink, weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 1.1.1.1, dummy1 onlink, weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 4.4.4.16 (recursive), weight 1, 00:00:02
via 1.1.1.1, dummy1 onlink, weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
via 1.1.1.1, dummy1, weight 1, 00:00:02
D> 4.4.4.15/32 [150/0] via 1.1.1.1 (recursive), weight 1, 00:00:09
* via 1.1.1.1, dummy1 onlink, weight 1, 00:00:09
via 4.4.4.1 (recursive), weight 1, 00:00:09
via 1.1.1.1, dummy1, weight 1, 00:00:09
via 4.4.4.2 (recursive), weight 1, 00:00:09
via 1.1.1.1, dummy1, weight 1, 00:00:09
via 4.4.4.3 (recursive), weight 1, 00:00:09
via 1.1.1.1, dummy1, weight 1, 00:00:09
via 4.4.4.4 (recursive), weight 1, 00:00:09
via 1.1.1.1, dummy1, weight 1, 00:00:09
via 4.4.4.5 (recursive), weight 1, 00:00:09
via 1.1.1.1, dummy1, weight 1, 00:00:09
via 4.4.4.6 (recursive), weight 1, 00:00:09
via 1.1.1.1, dummy1, weight 1, 00:00:09
via 4.4.4.7 (recursive), weight 1, 00:00:09
via 1.1.1.1, dummy1, weight 1, 00:00:09
via 4.4.4.8 (recursive), weight 1, 00:00:09
via 1.1.1.1, dummy1, weight 1, 00:00:09
via 4.4.4.9 (recursive), weight 1, 00:00:09
via 1.1.1.1, dummy1, weight 1, 00:00:09
via 4.4.4.10 (recursive), weight 1, 00:00:09
via 1.1.1.1, dummy1, weight 1, 00:00:09
via 4.4.4.11 (recursive), weight 1, 00:00:09
via 1.1.1.1, dummy1, weight 1, 00:00:09
via 4.4.4.12 (recursive), weight 1, 00:00:09
via 1.1.1.1, dummy1, weight 1, 00:00:09
via 4.4.4.13 (recursive), weight 1, 00:00:09
via 1.1.1.1, dummy1, weight 1, 00:00:09
via 4.4.4.14 (recursive), weight 1, 00:00:09
via 1.1.1.1, dummy1, weight 1, 00:00:09
via 4.4.4.16 (recursive), weight 1, 00:00:09
via 1.1.1.1, dummy1 onlink, weight 1, 00:00:09
via 1.1.1.1, dummy1, weight 1, 00:00:09
via 1.1.1.1, dummy1, weight 1, 00:00:09
via 1.1.1.1, dummy1, weight 1, 00:00:09
via 1.1.1.1, dummy1, weight 1, 00:00:09
via 1.1.1.1, dummy1, weight 1, 00:00:09
via 1.1.1.1, dummy1, weight 1, 00:00:09
via 1.1.1.1, dummy1, weight 1, 00:00:09
via 1.1.1.1, dummy1, weight 1, 00:00:09
via 1.1.1.1, dummy1, weight 1, 00:00:09
via 1.1.1.1, dummy1, weight 1, 00:00:09
via 1.1.1.1, dummy1, weight 1, 00:00:09
via 1.1.1.1, dummy1, weight 1, 00:00:09
via 1.1.1.1, dummy1, weight 1, 00:00:09
via 1.1.1.1, dummy1, weight 1, 00:00:09
via 1.1.1.1, dummy1, weight 1, 00:00:09
D> 4.4.4.16/32 [150/0] via 1.1.1.1 (recursive), weight 1, 00:00:19
* via 1.1.1.1, dummy1 onlink, weight 1, 00:00:19
via 4.4.4.1 (recursive), weight 1, 00:00:19
via 1.1.1.1, dummy1, weight 1, 00:00:19
via 4.4.4.2 (recursive), weight 1, 00:00:19
...............
................
and on...
```
You can repro the above via:
```
kernel routes:
1.1.1.1 dev dummy1 scope link
4.4.4.0/24 via 1.1.1.1 dev dummy1
==============================
config:
nexthop-group doof
nexthop 1.1.1.1
nexthop 4.4.4.1
nexthop 4.4.4.10
nexthop 4.4.4.11
nexthop 4.4.4.12
nexthop 4.4.4.13
nexthop 4.4.4.14
nexthop 4.4.4.15
nexthop 4.4.4.16
nexthop 4.4.4.2
nexthop 4.4.4.3
nexthop 4.4.4.4
nexthop 4.4.4.5
nexthop 4.4.4.6
nexthop 4.4.4.7
nexthop 4.4.4.8
nexthop 4.4.4.9
!
===========================
Then use sharpd to install 4.4.4.16 -> 4.4.4.1 pointing to that nexthop
group in decending order.
```
With these changes it prevents the growing ecmp above by disallowing
duplicates to be in the resolution decision. These nexthops are not
installed anyways so why should we be resolving to them?
Signed-off-by: Stephen Worley <sworley@nvidia.com>
We don't use `%n` anywhere, so the only purpose it serves is enabling
exploits.
(I thought about this initially when adding printfrr, but I wasn't sure
we don't use `%n` anywhere, and thought I'll check later, and then just
forgot it...)
Signed-off-by: David Lamparter <equinox@diac24.net>
