The indentation level for ospf_read was starting to be pretty
extremene. Rework into 2 functions for improved readability.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Read in up to 20(ospf write-multipler X) packets, for handling of data.
This improves performance because we allow ospf to have a bit more data
to work on in one go for spf calculations instead of 1 packet at a time.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Turning on packet debugs and seeing a header dump that is 11
lines long is useless
2019/11/07 01:07:05.941798 OSPF: ip_v 4
2019/11/07 01:07:05.941806 OSPF: ip_hl 5
2019/11/07 01:07:05.941813 OSPF: ip_tos 192
2019/11/07 01:07:05.941821 OSPF: ip_len 68
2019/11/07 01:07:05.941831 OSPF: ip_id 48576
2019/11/07 01:07:05.941838 OSPF: ip_off 0
2019/11/07 01:07:05.941845 OSPF: ip_ttl 1
2019/11/07 01:07:05.941857 OSPF: ip_p 89
2019/11/07 01:07:05.941865 OSPF: ip_sum 0xcf33
2019/11/07 01:07:05.941873 OSPF: ip_src 200.254.30.14
2019/11/07 01:07:05.941882 OSPF: ip_dst 224.0.0.5
We already have this debugged, it's not going to change and the
end developer can stick this back in if needed by hand to debug
something that is not working properly.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This commit has:
The received packet path in ospf, had absolutely no debugs associated with
it. This makes it extremely hard to know when we receive packets for
consumption. Add some breadcrumbs to this end.
Large chunks of commands have no ability to debug what is happening
in what vrf. With ip overlap X vrf this becomes a bit of a problem
Add some breadcrumbs here.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add a helper function to return the name of the vrf we are in
so it can be used as part of debug strings.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We have a bunch of places that look for ORIGINAL_CODING. There is
nothing in our configure system to define this value and a quick
git blame shows this code as being original to the import a very
very long time ago. This is dead code, removing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Recently Lot of issues are seen in OSPF adjacnecy establishements,
sessions was tear down because of DD Sequence Number mismatch.
adding Debugs to capture Master & slave generated sequence numbers.
Signed-off-by: Satheesh Kumar K <sathk@cumulusnetworks.com>
Use a local variable to avoid trying to take the address
of a packed struct member - an address from the ip header
in these cases.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The opaque lsa that we are storing is stored on various
lists depending on it's type. This removal from the
list was being done *after* the pointer was freed. This
is not a good idea. Since the use after free was just
removal from a linked list and the freeing function does
not do anything other than free data, than just switching the function
order should be sufficient.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Root Cause:
Lookup for the point-to-point neighbor was failing because the neighbor
lookup was based on neighbor interface IP address. But, for point-to-point
neighbor the key is router-id for lookup. Lookup failure was causing the
BFD updates from PTM to get dropped.
Fix:
Added walk of the neighbor list if the network type is point-to-point to
find the appropriate neighbor. The match is based on source IP address of
the neighbor since that’s the address registered with BFD for monitoring.
Ticket: CM-20411
Signed-off-by: Radhika Mahankali <radhika@cumulusnetworks.com>
Scenarios where this code change is required:
1. BFD is un-configured from BGP at remote end.
Neighbour BFD sends ADMIN_DOWN state, but BFD on local side will send
DOWN to BGP, resulting in BGP session DOWN.
Removing BFD session administratively shouldn't bring DOWN BGP session
at local or remote.
2. BFD is un-configured from BGP or shutdown locally.
BFD will send state DOWN to BGP resulting in BGP session DOWN.
(This is akin to saying do not use BFD for BGP)
Removing BFD session administratively shouldn't bring DOWN BGP session at
local or remote.
Signed-off-by: Sayed Mohd Saquib sayed.saquib@broadcom.com
Cleanup the interface creation apis to make it more
clear what they are doing.
Make it explicit that the creation via name/ifindex will
only add it to the appropriate list.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
For all the places we have a zclient->interface_up convert
them to use the interface ifp_up callback instead.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Switch the zclient->interface_add functionality to have everyone
use the interface create callback in lib/if.c
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Start the conversion to allow zapi interface callbacks to be
controlled like vrf creation/destruction/change callbacks.
This will allow us to consolidate control into the interface.c
instead of having each daemon read the stream and react accordingly.
This will hopefully reduce a bunch of cut-n-paste stuff
Create 4 new callback functions that will be controlled by
lib/if.c
create -> A upper level protocol receives an interface creation event
The ifp is brand spanking newly created in the system.
up -> A upper level protocol receives a interface up event
This means the interface is up and ready to go.
down -> A upper level protocol receives a interface down
destroy -> A upper level protocol receives a destroy event
This means to delete the pointers associated with it.
At this point this is just boilerplate setup for future commits.
There is no new functionality.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There's no need to install MPLS FTNs using the ZEBRA_ROUTE_ADD
message since the ZEBRA_MPLS_LABELS_ADD message already does that
(in addition to installing an MPLS LSP).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This new message makes it possible to install/reinstall LSPs with
multiple nexthops using a single ZAPI message.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
* Add ability to specify the nexthop type;
* Add ability to install or not a FTN (in addition to an LSP).
These two additions will be useful to install local SR Prefix-SIDs
configured with the no-PHP option.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
SR support for IS-IS is coming so we need to be able to distinguish
OSPF and IS-IS LSPs.
While here, add missing case statement for LDP on
lsp_type_from_re_type().
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Use the route type and instance instead of the route distance
to identify MPLS FTNs. This is a more robust approach since the
routing daemons can modify the distance of their announced routes
via configuration, which can cause inconsistencies.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Do this for the following reasons:
* Improve modularity of the code by separating the decoding of the
ZAPI messages from their processing;
* Create an API that is easier to use by the client daemons.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When OSPF receives a Database description packet and is in
`Down`, `Attempt` or `2-Way` state we are creating a warning
for the end user.
rfc2328 states(10.6):
Down - The packet should be rejected
Attempt - The packet should be rejected
2-Way - The packet should be ignored
I cannot find any instructions in the rfc to state what the operational
difference is between rejected and ignored. Neither can I figure
out what FRR expects the end user to do with this information.
I can see this information being useful if we encounter a bug
down the line and we have gathered a bunch of data. As such
let's modify the code to remove the flog_warn and convert
the message to a debug level message that can be controlled by
appropriate debug statements.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This looks like a finish up of the partial cleanup that
ocurred at some point in time in the past. When we
alloc oi also always alloc the oi->obuf. When we delete
oi always delete the oi->obuf right before.
This cleans up a bunch of code to be simpler and hopefully
easier to follow.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
I am rarely seeing this crash:
r2: ospfd crashed. Core file found - Backtrace follows:
[New LWP 32748]
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/aarch64-linux-gnu/libthread_db.so.1".
Core was generated by `/usr/lib/frr/ospfd'.
Program terminated with signal SIGABRT, Aborted.
2019-08-29 15:59:36,149 ERROR: assert failed at "test_ospf_sr_topo1/test_memory_leak":
Which translates to this code:
node = listhead(ospf->oi_write_q);
assert(node);
oi = listgetdata(node);
assert(oi);
So if we get into ospf_write without anything on the oi_write_q
we are stopping the program.
This is happening because in ospf_ls_upd_queue_send we are calling
ospf_write. Imagine that we have a interface already on the on_write_q
and then ospf_write handles the packet send for all functions. We
are not clearing the t_write thread and we are popping and causing
a crash.
Additionally modify OSPF_ISM_WRITE_ON(O) to not just blindly
turn on the t_write thread. Only do so if we have data.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
ospfd: Remove redundant asserts
assert(oi) is impossible all listgetdata(node) directly proceeding
it already asserts here, besides a node cannot be created
with a null pointer!
If list_isempty is called directly before the listhead call
it is impossilbe that we do not have a valid pointer here.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
vrf hook handler associated to updating the vrf default name is added.
Then, when creating default ospf vrf instance, the vrf identifier will
be associated to the correct default vrf name.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
when an other name is given to default vrf, then there is case where 2
ospf instances are created, which is not wished. Also, it appears that
interface learning and ospf interface configuration is not lost when not
creating that default ospf instance. So removing it.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Debian packaging when run finds a bunch of spelling errors:
I: frr: spelling-error-in-binary usr/bin/vtysh occurences occurrences
I: frr: spelling-error-in-binary usr/lib/frr/bfdd Amount of times Number of times
I: frr: spelling-error-in-binary usr/lib/frr/bgpd occurences occurrences
I: frr: spelling-error-in-binary usr/lib/frr/bgpd recieved received
I: frr: spelling-error-in-binary usr/lib/frr/isisd betweeen between
I: frr: spelling-error-in-binary usr/lib/frr/ospf6d Infomation Information
I: frr: spelling-error-in-binary usr/lib/frr/ospfd missmatch mismatch
I: frr: spelling-error-in-binary usr/lib/frr/pimd bootsrap bootstrap
I: frr: spelling-error-in-binary usr/lib/frr/pimd Unknwon Unknown
I: frr: spelling-error-in-binary usr/lib/frr/zebra Requsted Requested
I: frr: spelling-error-in-binary usr/lib/frr/zebra uknown unknown
I: frr: spelling-error-in-binary usr/lib/x86_64-linux-gnu/frr/libfrr.so.0.0.0 overriden overridden
This commit fixes all of them except the bgp `recieved` issue due to
it being part of json output. That one will need to go through
a deprecation cycle.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The `destination` field of the connection structure was used to store
the broadcast address, if the connection was not p2p. This multipurpose
is not very evident and the benefits over calculating the bcast address
on the fly minimal.
Signed-off-by: Juergen Werner <juergen@opensourcerouting.org>
Need to clear out the external_info for the "always" default route that
we installed in ospf_redistribute_default_set().
Signed-off-by: David Lamparter <equinox@diac24.net>
This is a "workaround" for something broken in LSDB sync that has been
kept around since the beginning of our git history...
(It works correctly without this "workaround".)
Signed-off-by: David Lamparter <equinox@diac24.net>
ospf->external[DEFAULT_ROUTE] and zclient->default_information don't
line up with each other; the former is only used for "originate always".
Fixes: #4237
Signed-off-by: David Lamparter <equinox@diac24.net>
This reverts commit a6b4e1fded.
This fix is wrong too. The zclient->redist & ->mi_redist arrays are
accessed past their size for any external route that is not 0.0.0.0/0.
Also, it is incorrect to check default_information for DEFAULT_ROUTE
since that's "originate always".
Signed-off-by: David Lamparter <equinox@diac24.net>
