libunwind provides an alternate to backtrace() for printing out the call
stack of a particular location. It doesn't use the frame pointer, it
goes by the DWARF debug info. In most cases the traces have exactly the
same information, but there are some situations where libunwind traces
are better.
(On some platforms, the libc backtrace() also uses the DWARF debug info
[e.g.: ARM backtraces are impossible without it] but this is not the
case everywhere, especially not on BSD libexecinfo.)
Signed-off-by: David Lamparter <equinox@diac24.net>
Allow the modification of whether or not we will allow
BUM flooding on the vxlan bridge. To do this allow
the upper level protocol to specify via the ZEBRA_VXLAN_FLOOD_CONTROL
zapi message.
If flooding is disabled then BUM traffic will not be forwarded
to other VTEP's.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Corrections so that the BGP daemon can work with the label manager properly
through a label-manager proxy. Details:
- Correction so the BGP daemon behind a proxy label manager gets the range
correctly (-I added to the BGP daemon, to set the daemon instance id)
- For the BGP case, added an asynchronous label manager connect command so
the labels get recycled in case of a BGP daemon reconnection. With this,
BGPd and LDPd would behave similarly.
Signed-off-by: F. Aragon <paco@voltanet.io>
fabricd is built using the sources of isisd. To allow differentiation
in the code, -DFABRICD=1 is added to its preprocessor flags.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
The ZEBRA_IPV4_ROUTE_IPV6_NEXTHOP_ADD zapi message has no creators and
no handlers. Let's just remove.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The ZEBRA_IPV4_ROUTE_[ADD|DELETE] and ZEBRA_IPV6_ROUTE_[ADD|DELETE] functionality
has been deprecated for a year now, let's remove this code from the system.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Sometimes a error state is detected when we have added
new code to FRR, but not updated all the places that
we should have. Consider this a developmental escape
that needs to be fixed.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add a new error code LIB_ERR_SYSTEM_CALL to the ferr subsystem.
Additionally convert LIB_ERR_VRF_SOCKET to a more generic
LIB_ERR_SOCKET.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
ZEBRA IPSET defines are added for creating/deleting ipset contexts.
Ans also create ipset hash sets.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The library changes add 3 new messages to exchange between daemons and
ZEBRA.
- ZEBRA_TABLE_MANAGER_CONNECT,
- ZEBRA_GET_TABLE_CHUNK,
- ZEBRA_RELEASE_TABLE_CHUNK,
the need is that routing tables identifier are shared by various
services. For the current case, policy routing enhancements are planned
to be used in FRR. Poliy routing relies on routing tables identifiers
from kernels. It will be mainly used by the future policy based routing
daemon, but not only. In the flowspec case, the BGP will need also to
inject policy routing information into specific routing tables.
For that, the proposal is made to let zebra give the appropriate range
that is needed for all daemons.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
PR #1739 added code to leak routes between (default VRF) VPN safi and unicast RIBs in any VRF. That set of changes included temporary CLI including vpn-policy blocks to specify RD/RT/label/&c. After considerable discussion, we arrived at a consensus CLI shown below.
The code of this PR implements the vpn-specific parts of this syntax:
router bgp <as> [vrf <FOO>]
address-family <afi> unicast
rd (vpn|evpn) export (AS:NN | IP:nn)
label (vpn|evpn) export (0..1048575)
rt (vpn|evpn) (import|export|both) RTLIST...
nexthop vpn (import|export) (A.B.C.D | X:X::X:X)
route-map (vpn|evpn|vrf NAME) (import|export) MAP
[no] import|export [vpn|evpn|evpn8]
[no] import|export vrf NAME
User documentation of the vpn-specific parts of the above syntax is in PR #1937
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
For L3VPN's we need to create a label associated with the specified
vrf to be installed into the kernel to allow a pop and lookup
operation.
The new api is:
zclient_send_vrf_label(struct zclient *zclient, vrf_id_t vrf_id,
mpls_label_t label);
For the specified vrf_id associate the specified label for
a pop and lookup operation for forwarding.
To setup a POP and Forward use MPLS_LABEL_IMPLICIT_NULL
If the same label is passed in we ignore the call.
If the label is different we update entry.
If the label is MPLS_LABEL_NONE we remove
the entry.
This sets up the api. Future commits will have the functionality
to actually install into the kernel.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In EVPN symmetric routing, not all subnets are presents everywhere.
We have multiple scenarios where a host might not get learned locally.
1. GARP miss
2. SVI down/up
3. Silent host
We need a mechanism to resolve such hosts. In order to achieve this,
we will be advertising a subnet route from a box and that box will help
in resolving the ARP to such hosts.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Add a daemon that will allow us to test the zapi
as well as test route install/removal times from
the kernel.
The current commands are:
install route <starting ip address> nexthop <nexthop> (1-1000000)
This command starts installing at <starting ip address>/32
(1-100000) routes that it auto-increments by 1
Installation start time is noted in the log and finish
time is noted as well.
remove routes <starting ip address> (1-1000000)
This command removes routes at <starting ip address>/32
and removes (1-100000) routes created by the install route
command.
This code can be considered experimental and *is not*
something that should be run in a production environment.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Provide ZAPI code that can pass to an upper level protocol
what happened to it's route on install.
There are these notifications:
1) ZAPI_ROUTE_FAIL_INSTALL - The route attempted to be
installed did not work.
2) ZAPI_ROUTE_BETTER_ADMIN_WON - A route that was installed
has become un-installed due to another routing protocol
installing a better admin distance
3) ZAPI_ROUTE_INSTALLED - The route specified has been installed
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Tentative thread-safety support for zlog. Functions designed to be
called from signal handlers are not mt-safe.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Some differences compared to the old API:
* Now the redistributed routes are sent using address-family
independent messages (ZEBRA_REDISTRIBUTE_ROUTE_ADD and
ZEBRA_REDISTRIBUTE_ROUTE_DEL). This allows us to unify the ipv4/ipv6
zclient callbacks in the client daemons and thus remove a lot of
duplicate code;
* Now zebra sends all nexthops of the redistributed routes to the client
daemons, not only the first one. This shouldn't have any noticeable
performance implications and will allow us to remove an ugly exception
we had for ldpd (which needs to know all nexthops of the redistributed
routes). The other client daemons can simply ignore the nexthops if
they want or consult just the first one (e.g. ospfd/ospf6d/ripd/ripngd).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
adds a new all-daemon "debug memstats-at-exit" command. Also saves
memstats to a file in /tmp, useful if a long-running daemon is having
weird issues (e.g. in a user install).
Fixes: #437
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
As noticed in 657cde1, the zapi_ipv[4|6]_route functions are broken in
many ways and that's the reason that many client daemons (e.g. ospfd,
isisd) need to send handcrafted messages to zebra.
The zapi_route() function introduced by Donald solves the problem
by providing a consistent way to send ipv4/ipv6 routes to zebra with
nexthops of any type, in all possible combinations including IPv4 routes
with IPv6 nexthops (for BGP unnumbered routes).
This patch goes a bit further and creates two new address-family
independent ZAPI message types that the client daemons can
use to advertise route information to zebra: ZEBRA_ROUTE_ADD and
ZEBRA_ROUTE_DELETE. The big advantage of having address-family independent
messages is that it allows us to remove a lot of duplicate code in zebra
and in the client daemons.
This patch also introduces the zapi_route_decode() function. It will be
used by zebra to decode route messages sent by the client daemons using
zclient_route_send(), which calls zapi_route_encode().
Later on we'll use this same pair of encode/decode functions to
send/receive redistributed routes from zebra to the client daemons,
taking the idea of removing code duplication to the next level.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Base framework for supporting MPLS pseudowires in FRR.
A consistent zserv interface is provided so that any client daemon
(e.g. ldpd, bgpd) can install/uninstall pseudowires in a standard
way. Static pseudowires can also be implemented by using the same
interface.
When zebra receives a request to install a pseudowire and the installation
in the kernel or hardware fails, a notification is sent back to the
client daemon and a new install attempt is made every 60 seconds (until
it succeeds).
Support for external dataplanes is provided by the use of hooks to
install/uninstall pseudowires.
Signed-off-by: ßingen <bingen@voltanet.io>
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
zlog_* doesn't work in startup before we've loaded the real logging
configuration. Add some code to log to stderr for that window of time.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The pimregX devices when created by the kernel are put into
the default vrf. When pim gets the callback that the device
exists, check to see if it is a pimregX device and if so
move it into the appropriate vrf.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This reverts commit c14777c6bf.
clang 5 is not widely available enough for people to indent with. This
is particularly problematic when rebasing/adjusting branches.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Implement handling of MACs and Neighbors (ARP/ND entries) in zebra:
- MAC and Neighbor database handlers
- Read MACs and Neighbors from the kernel, when needed and create
entries in zebra's MAC and Neighbor databases.
- Handle add/update/delete notifications from the kernel for MACs and
Neighbors and update zebra's database appropriately
- Inform locally learnt MACs and Neighbors to client
- Handle MACIP add/delete from client and install appriporiate entries
into the kernel
- Since Neighbor entries will be installed on an SVI, implement the
needed mappings
NOTE: kernel interface is only implemented for Linux/netlink
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Implement fundamental handling for VNIs and VTEPs:
- Handle EVPN enable/disable by client (advertise-all-vni)
- Create/update/delete VNIs based on VxLAN interface events and inform
client
- Handle VTEP add/delete from client and install into kernel
- New debug command for VxLAN/EVPN
- kernel interface (Linux/netlink only)
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
log.c provides functionality for associating a constant (typically a
protocol constant) with a string and finding the string given the
constant. However this is highly delicate code that is extremely prone
to stack overflows and off-by-one's due to requiring the developer to
always remember to update the array size constant and to do so correctly
which, as shown by example, is never a good idea.b
The original goal of this code was to try to implement lookups in O(1)
time without a linear search through the message array. Since this code
is used 99% of the time for debugs, it's worth the 5-6 additional cmp's
worst case if it means we avoid explitable bugs due to oversights...
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Just adding -pthread to gcc options changes libc's behaviour, e.g.
making malloc() use proper locking. This means a SEGV inside malloc()
(e.g. because malloc bookkeeping structures have been damaged by writing
to a broken pointer) can lead to a lockup by the following chain:
- random_function()
- malloc()
--- SEGV
- core_handler()
- zlog_backtrace_sigsafe()
- backtrace()
- malloc()
This will hang forever waiting for the malloc() lock to be released.
Another failure mode is dynamic linking with lazy binding (-z lazy,
default). Since backtrace() is seldomly used, this means the call to
backtrace() in the core handler can in fact result in the dynamic linker
trying to resolve the "backtrace" symbol, which can also deadlock.
Add several safeguards to prevent any of this from happening.
(Unfortunately, these are not theoretical issues - I found them by
running into them headfirst.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Label Manager allows to share MPLS label space among different
daemons. Each daemon can request a chunk of consecutive labels and
release it if it doesn't need them anymore. Label Manager stores the
daemon protocol and instance to identify the owner client. It uses them
to perform garbage collection, releasing all label chunks from a client
when it gets disconnected or reconnected.
Additionally, every client can request that the chunk is never garbage
collected. In that case client has the responsibility to release
non-used labels.
Zebra can host the label manager itself (if no -l param is provided) or
connect to an external one using zserv/zclient (providing its address
with -l param).
Client code is in lib/zclient.c, but currently only LDP is using it.
TODO: Allow for custom ranges requests, i.e., specify the start label
besides the chunk.
TODO: Release labels from LDP.
Signed-off-by: Bingen Eguzkitza <bingen@voltanet.io>
Please Note, I will be redoing this commit message with
more information.
Additionally I will rework the lib/* changes into their
own commits.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
... no need to have struct zlog generally-exposed.
A few files get to include log_int.h because they use zlog/vzlog.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The protocols enum serves no purpose other than adding potential for
bugs and making it complicated to add a new protocol... nuke.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This provides DMVPN support and integrates to strongSwan. Please read
README.nhrpd and README.kernel for more details.
[DL: cherry-picked from dafa05e65fe4b3b3ed5525443f554215ba14f42c]
[DL: merge partially resolved, this commit will not build.]
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Move the data structure used to have knowledge about
the zapi message types to zclient.h where it belongs.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
- "redist foo" parsing modified to check for foo==vnc and foo==vnc-direct
instead of just leading 'v' character
- string designating ZEBRA_ROUTE_VNC_DIRECT changed from "vpn" to "vnc-direct"
- route_types.pl parser recognizes 7th field to restrict availability
of a route type in the redist command to specific daemons
- restrict "vnc-direct" to bgpd only (doesn't make sense elsewhere)
- vnc documentation updated to match
Signed-off-by: Lou Berger <lberger@labn.net>
All of the autogenerated macros in lib/route_types.pl are now called
FRR_* instead of QUAGGA_*.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
watchquagga logs as "NONE", which will also become visible in vtysh for
error messages. Add "WATCHQUAGGA" log target.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This feature adds an L3 & L2 VPN application that makes use of the VPN
and Encap SAFIs. This code is currently used to support IETF NVO3 style
operation. In NVO3 terminology it provides the Network Virtualization
Authority (NVA) and the ability to import/export IP prefixes and MAC
addresses from Network Virtualization Edges (NVEs). The code supports
per-NVE tables.
The NVE-NVA protocol used to communicate routing and Ethernet / Layer 2
(L2) forwarding information between NVAs and NVEs is referred to as the
Remote Forwarder Protocol (RFP). OpenFlow is an example RFP. For
general background on NVO3 and RFP concepts see [1]. For information on
Openflow see [2].
RFPs are integrated with BGP via the RF API contained in the new "rfapi"
BGP sub-directory. Currently, only a simple example RFP is included in
Quagga. Developers may use this example as a starting point to integrate
Quagga with an RFP of their choosing, e.g., OpenFlow. The RFAPI code
also supports the ability import/export of routing information between
VNC and customer edge routers (CEs) operating within a virtual
network. Import/export may take place between BGP views or to the
default zebera VRF.
BGP, with IP VPNs and Tunnel Encapsulation, is used to distribute VPN
information between NVAs. BGP based IP VPN support is defined in
RFC4364, BGP/MPLS IP Virtual Private Networks (VPNs), and RFC4659,
BGP-MPLS IP Virtual Private Network (VPN) Extension for IPv6 VPN . Use
of both the Encapsulation Subsequent Address Family Identifier (SAFI)
and the Tunnel Encapsulation Attribute, RFC5512, The BGP Encapsulation
Subsequent Address Family Identifier (SAFI) and the BGP Tunnel
Encapsulation Attribute, are supported. MAC address distribution does
not follow any standard BGB encoding, although it was inspired by the
early IETF EVPN concepts.
The feature is conditionally compiled and disabled by default.
Use the --enable-bgp-vnc configure option to enable.
The majority of this code was authored by G. Paul Ziemba
<paulz@labn.net>.
[1] http://tools.ietf.org/html/draft-ietf-nvo3-nve-nva-cp-req
[2] https://www.opennetworking.org/sdn-resources/technical-library
Now includes changes needed to merge with cmaster-next.
This is a rather large mechanical commit that splits up the memory types
defined in lib/memtypes.c and distributes them into *_memory.[ch] files
in the individual daemons.
The zebra change is slightly annoying because there is no nice place to
put the #include "zebra_memory.h" statement.
bgpd, ospf6d, isisd and some tests were reusing MTYPEs defined in the
library for its own use. This is bad practice and would break when the
memtype are made static.
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
[CF: rebased for cmaster-next]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
This rewrites Quagga's memory per-type allocation counting, without
using a fixed global list of types. Instead, source files can declare
memory types which get handled through constructor functions called by
the dynamic linker during startup.
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
[DL: v3: forgot "nonnull" attribute on XFREE]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Zebra api that was never used.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
(cherry picked from commit 33361d3992c8bff66247b76e5adaf4b0de8217df)
ZEBRA_IPV4_NEXTHOP_LOOKUP and ZEBRA_IPV6_NEXTHOP_LOOKUP
were never used by any protocol. Remove dead code
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
(cherry picked from commit 22cd6214bf44863bfb5a34b40ab4abba3c5c4574)
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
(cherry picked from commit abfd40d68202882696260617729518a6d2c99302)
now that we know what thread we're currently executing, let's add that
information to SEGV / assert backtraces.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
(cherry picked from commit 615f9f18fc025757a255f936748fc1e86e922783)
Welcome pimd to the Quagga daemon zoo!
This is a merge of commit 77ae369 ("pimd: Log ifindex found for an
interface when zebra lib reports a new connected address."), with
the intermediate "reconnect" changes removed (c9adf00...d274381).
d274381 is replaced with b162ab7, which includes some changes. In
addition, 4 reconnect-related changes and 1 cosmetic one have been
bumped out.
The rebase command used to produce the branch that is merged here is:
git rebase --onto b162ab7 c9adf00 77ae369
Note that 3 patches had their author rewritten from
"Anonymous SR#108542 <>" (which is not a valid git author ID)
to: "Savannah SR#108542 <nbahr@atcorp.com>" (which is the e-mail address
listed in the associated Savannah ticket)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Instead of turning on IPv6 RA on every interface as soon as it has an IPv6
address, only enable it upon configuration of BGP neighbor. When the BGP
neighbor is deleted, signal that RAs can be turned off.
To support this, introduce new message interaction between BGP and Zebra.
Also, take appropriate actions in BGP upon interface add/del since the
unnumbered neighbor could exist prior to interface creation etc.
Only unnumbered IPv6 neighbors require RA, the /30 or /31 based neighbors
don't. However, to keep the interaction simple and not have to deal with
too many dynamic conditions (e.g., address deletes or neighbor change to/from
'v6only'), RAs on the interface are triggered upon any unnumbered neighbor
configuration.
BGP-triggered RAs will cause RAs to be initiated on the interface; however,
if BGP asks that RAs be stopped (upon delete of unnumbered neighbor), RAs
will continue to be exchanged if the operator has explicitly enabled.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-10640
Reviewed By: CCR-4589
Testing Done: Various manual and automated (refer to defect)
Ticket: CM-7615, CM-7773
Reviewed By: CCR-3610, CCR-3708
Testing Done: Unit, BGP Smoke and OSPF Smoke
Changes (70790261926b17200c8c9377c4576cd3b486fcef) ported from 2.5
Issue (related to CM-7615): 1. CM-7615: There is mismatch in the client name between ptm display of client BFD sessions and the zebra logs. For example, if bgpd added BFD session, zebra logs will show the client as “bgp” but the ptm display will show it as “quagga”
2. Bigger problem is when 2 clients (for example OSPF and BGP) from Quagga register for same BFD session and only one client de-registers the BFD session. This results in BFD session deletion from PTM even though other client still has the BFD registration.
Root Cause: Even though BGP, OSPF and OSPF6 are 3 different clients from Quagga that are trying to register/deregister BFD sessions with PTM, all 3 are represented as one client “quagga” from zebra. This makes it hard for PTM/BFD to distinguish between all three when BFD peer registration/deregistration happens from the clients.
Fix: Send the actual client name bgp, ospf or ospf6 from zebra with BFD reg/dereg messages instead of one unified client name “quagga”
CM-7773: BFD sessions are not getting cleaned from PTM even though no BGP peering exists in Quagga.
Root Cause: PTM cleans up stale BFD sessions from a client when it finds a change in seq id advertised by the client. But, if PTM never detects a change in the seq id then the stale BFD sessions never get cleaned up. The test restarts the quagga without saving the configuration, which results in no BGP peering. No BGP peers are registered with PTM after restart and PTM does not detect a client seq id change resulting in stale BFD sessions.
Fix: New client registration message was added in PTM. Every client that is interested in BFD monitoring will register with PTM with the client seq id. Client will register with a different seq id (typically pid) every time it restarts. This will help in detecting the change in seq id and cleanup of stale BFD sessions for a client.
Code Changes: To support the new client registration message following changes have been made
- Added support for client registration messaging in zebra for sending messages to PTM.
- Added support for client registration messaging between zebra and clients (BGP, OSPF and OSPF6) in BFD library.
- Expanded the reg/de reg peer messaging between zebra and clients to support client specific seq id to distinguish between multiple clients registering for BFD peer rather than one “quagga” client.
- Changes in bgpd, ospfd and ospf6d to send client registrations at the time of daemon initialization and on receiving BFD peer replay message.
Implement VRF change semantics for an interface to be invoked
when an interface is moved from one VRF (e.g., the Default) to
another. This includes the message definition as well as updating,
deleting or adding the interface from clients, depending on their
interest in the VRFs (old and new). Also handle replay of the
addresses on the interface upon VRF change, if required.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Ticket: CM-9527
Reviewed By: CCR-4174
Testing Done: Manual tests of various scenarios
