Add ability to enable -w option for all daemons in a topotest and use
this option instead of the deprecated -n.
Signed-off-by: Igor Ryzhov <idryzhov@gmail.com>
Decrease the protocol timers, wait for peers to connect (and test it)
then finally wait a bit more for SAs to be propagated.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
- add readline and waitline functions for use with popen objects
- other non-topotest (munet native) run changes
- vm/qemu support booting cloud images (rocky, ubuntu, debian)
- native topology init commands
Signed-off-by: Christian Hopps <chopps@labn.net>
Expand existing pim_mrib tests to include testing lookup modes
specific to source and/or group as defined in prefix lists.
Signed-off-by: Nathan Bahr <nbahr@atcorp.com>
The test starts with checking for rib insertion
of routes that may take some time after system
startup to come up. Under heavy load this may
cause this test to just fail. Give it more time.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The test starts right in on check_pings with a 10 second
time out. Any type of delay on startup is going to cause
problems. Give the first check_ping significant time
for the test to be fully brought up.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add a test that controls that the configuration of an imported
BGP instance triggers a re-syncronisation.
Ensure that changing an attribute like route distinguisher
triggers also a re-syncronisation.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
When a BGP instance is created or becomes valid, and when a parameter
is updated (router-id, route distinguisher), the peer up messages other
than loc rib peer up messages, are sent. Add a test that controls if
peer down and peer up messages are sent accordingly with correct route
distinguisher values.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
When unconfiguring an imported BGP instance, a peer down
should be sent to notify BMP collector that the BGP instance
is leaving.
Add a test that controls the presence of the peer down loc-rib
message.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Add the emission of a loc-rib peer up event for an imported bgp instance
when vrf state changes. Add a test to control in the BMP collector
that the peer up message is the one from that BGP instance.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Add the emission of a loc-rib peer up event for an imported bgp instance
at route-id reconfiguration. Add a test to control in the BMP collector
that the peer up message is the one from that BGP instance.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Add the emission of a loc-rib peer up event for an imported bgp instance
at import-vrf configuration. Add a test to control in the BMP collector
that the peer up message is the one from that BGP instance.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Add a test with a new peer defined in a VRF, and where
the BGP updates are imported in the BMP instance of the
default BGP instance.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Drop eth3 shutdown from ospf6d.conf - it doesn't do anything there. And it
actually shouldn't do anything: eth3 on r7/r8 are used as loopback-like
interfaces to inject the address on eth2 into OSPFv3. So they need to be up
for eth2 to work as expected.
Based on original PR#16811 commit:
eth3 shutdown is not applied because it is ospf6d.conf.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Signed-off-by: Martin Buck <mb-tmp-tvguho.pbz@gromit.dyndns.org>
Use router_json_cmp when checking for proper nexthops to get better
diagnostics in case of mismatches. Add step() messages to see which check
failed.
Based on original PR#16811 commit:
expect_num_nexthops() errors are not understandable.
Use router_json_cmp.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Signed-off-by: Martin Buck <mb-tmp-tvguho.pbz@gromit.dyndns.org>
"ip/ipv6 protocol any route-map <route map>" cli is setting
wrong route type ( ZEBRA_ROUTE_MAX ), It should set route type
ZEBRA_ROUTE_ALL.
Ticket: #4101560
Signed-off-by: Sougata Barik <sougatab@nvidia.com>
Add a test to control the peer up and down message sent when the route
distinguisher is updated.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The peer distinguisher format was badly displayed when a per peer
header is sent with an IP:AS2B format.
> {"peer_type": "loc-rib instance", "is_filtered": false, "policy": "loc-rib",
> "peer_distinguisher": "None:2", ...
The IP header is incorrectly read. Fix it.
> {"peer_type": "loc-rib instance", "is_filtered": false, "policy": "loc-rib",
> "peer_distinguisher": "3.3.3.5:2", ...
Fixes: 875511c466 ("topotests: add basic bmp collector")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Add a test to control the value of the peer bgp id of loc-rib peer up
messages when the bgp router-id is reconfigured.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Add a test where, when the vrf interface is flapping, a peer down and a
peer up message are sent. This test, when used with ASAN, detects the
memory leak of the open_tx and open_rx messages of the loc-rib.
Refresh the method of updating the SEQ value when reading the peer
messages: only update to the last matching SEQ value.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
