Problem statement:
When IPv4/IPv6 prefixes are received in BGP, bgp_update function registers the
nexthop of the route with nexthop tracking module. The BGP route is marked as
valid only if the nexthop is resolved.
Even for EVPN RT-5, route should be marked as valid only if the the nexthop is
resolvable.
Code changes:
1. Add nexthop of EVPN RT-5 for nexthop tracking. Route will be marked as valid
only if the nexthop is resolved.
2. Only the valid EVPN routes are imported to the vrf.
3. When nht update is received in BGP, make sure that the EVPN routes are
imported/unimported based on the route becomes valid/invalid.
Testcases:
1. At rtr-1, advertise EVPN RT-5 with a nexthop 10.100.0.2.
10.100.0.2 is resolved at rtr-2 in default vrf.
At rtr-2, remote EVPN RT-5 should be marked as valid and should be imported into
vrfs.
2. Make the nexthop 10.100.0.2 unreachable at rtr-2
Remote EVPN RT-5 should be marked as invalid and should be unimported from the
vrfs. As this code change deals with EVPN type-5 routes only, other EVPN routes
should be valid.
3. At rtr-2, add a static route to make nexthop 10.100.0.2 reachable.
EVPN RT-5 should again become valid and should be imported into the vrfs.
Signed-off-by: Ameya Dharkar <adharkar@vmware.com>
Before the fix:
2019/11/14 19:52:21 BGP: peer 192.168.2.5 deleted from subgroup s4peer
cnt 0 - missing space after s4 before peer
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Previous error was misleading and made it seem like Null0,
reject, or blackhole nexthops on static routes are invalid.
This commit makes it more clear as to why the error is seen.
Signed-off-by: Trey Aspelund <taspelund@cumulusnetworks.com>
With this code change, we can now filter evpn routes based on RD using the
match statement: "match evpn rd XX"
Signed-off-by: Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
Recently Lot of issues are seen in OSPF adjacnecy establishements,
sessions was tear down because of DD Sequence Number mismatch.
adding Debugs to capture Master & slave generated sequence numbers.
Signed-off-by: Satheesh Kumar K <sathk@cumulusnetworks.com>
Validate that the FEC prefix length is within the allowed limit
(depending on the FEC address family) in order to prevent possible
buffer overflows.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Problem reported with tracebacks seen when making multiple bfd timer
changes in frr.conf and applying via frr-reload.py. Found that when
multiple bfd timer changes are made, the same line can be added for
deletion more than once, causing the traceback when the deletion is
performed. This fix verifies the correct line is being appended for
deletion.
Ticket: CM-27233
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
The bug:
As part of displaying advertised routes to a peer, in the outer loop, we
iterate through all prefixes in the evpn table. In the inner loop,
we iterate through adj_out of each prefix.
If a prefix which is present in the evpn table is not advertised to a peer,
its corresponding attr == NULL. Checking for this condition is the fix.
Signed-off-by: Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
This code is called from the zebra main pthread during shutdown
but the thread event is scheduled via the zebra dplane pthread.
Hence, we should be using the `thread_cancel_async()` API to
cancel the thread event on a different pthread.
This is only ever hit in the rare case that we still have work left
to do on the update queue during shutdown.
Found via zebra crash:
```
(gdb) bt
\#0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50
\#1 0x00007f4e4d3f7535 in __GI_abort () at abort.c:79
\#2 0x00007f4e4d3f740f in __assert_fail_base (fmt=0x7f4e4d559ee0 "%s%s%s:%u: %s%sAssertion `%s' failed.\n%n", assertion=0x7f4e4d9071d0 "master->owner == pthread_self()",
file=0x7f4e4d906cf8 "lib/thread.c", line=1185, function=<optimized out>) at assert.c:92
\#3 0x00007f4e4d405102 in __GI___assert_fail (assertion=assertion@entry=0x7f4e4d9071d0 "master->owner == pthread_self()", file=file@entry=0x7f4e4d906cf8 "lib/thread.c",
line=line@entry=1185, function=function@entry=0x7f4e4d906b68 <__PRETTY_FUNCTION__.15817> "thread_cancel") at assert.c:101
\#4 0x00007f4e4d8d095a in thread_cancel (thread=0x55b40d01a640) at lib/thread.c:1185
\#5 0x000055b40c291845 in zebra_dplane_shutdown () at zebra/zebra_dplane.c:3274
\#6 0x000055b40c27ee13 in zebra_finalize (dummy=<optimized out>) at zebra/main.c:202
\#7 0x00007f4e4d8d1416 in thread_call (thread=thread@entry=0x7ffcbbc08870) at lib/thread.c:1599
\#8 0x00007f4e4d8a1ef8 in frr_run (master=0x55b40ce35510) at lib/libfrr.c:1024
\#9 0x000055b40c270916 in main (argc=8, argv=0x7ffcbbc08c78) at zebra/main.c:483
(gdb) down
\#4 0x00007f4e4d8d095a in thread_cancel (thread=0x55b40d01a640) at lib/thread.c:1185
1185 assert(master->owner == pthread_self());
(gdb)
```
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Put the code to free the data held by a nhg_ctx
in nhg_ctx_free() as well. We do it similiarly for
the dplane_ctx.
Let nhg_ctx_fini() be any other routines that need to
be handled before freeing.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
SA warned us lookup could be NULL dereferenced in some
paths. Handle the case where we are passed a NULL
nexthop before we try to copy it.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
When receiving igmp packets we are spitting out a lot of
debugs. Attempt to clean this up to allow us to understand
what is going on a bit better by just being able to look
at the log file.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When you turn on `debug igmp trace` we are seeing a bunch
of debugs associated with pim processing. This is because we were
using PIM_DEBUG_TRACE which is both `debug igmp trace` and `debug pim trace`
when tracing igmp code it would be nice to only see igmp work.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
instead of suppressing the 'exit' markers at the end of each
'interface XXX' clause in the mpls ldp configuration, mark
those with a special marker 'exit-ldp-if' and teach the
reload script to correctly recognize the new sub-subcontext
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
We are seeing situations where PIM is sending a IGMP v3 query
and immediately receiving back up the pim kernel interface the
query from itself:
from `show int brief`:
swp7 up default 192.168.202.1/24
We are also receiving these debugs:
2019-11-11T20:52:40.452307+00:00 leaf02 pimd[1592]: Send IGMPv3 query to 224.4.0.8 on swp7 for group 224.4.0.8, sources=0 msg_size=12 s_flag=0 QRV=2 QQI=125 QQIC=7d
2019-11-11T20:52:40.452430+00:00 leaf02 pimd[1592]: pim_mroute_msg(default): igmp kernel upcall on swp7(0x55eaa7dc7dc0) for 192.168.202.1 -> 224.4.11.123
2019-11-11T20:52:40.452574+00:00 leaf02 pimd[1592]: Recv IP packet from 192.168.202.1 to 224.4.11.123 on swp7: size=40 ip_header_size=24 ip_proto=2
2019-11-11T20:52:40.452699+00:00 leaf02 pimd[1592]: Recv IGMP packet from 192.168.202.1 to 224.4.11.123 on swp7: ttl=1 msg_type=17 msg_size=16
2019-11-11T20:52:40.452824+00:00 leaf02 pimd[1592]: Recv IGMP query v3 from 192.168.202.1 on swp7 for group 224.4.11.123
This query is causing us to do some weird gyrations around the IGMP state machine for handling
queries. Let's just prevent it from happening.
Ticket: CM-27247
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We were only checking that two nhg_hash_entry's were equal
based on the active nexthop NUMBER. This is not sufficient in
special cases where whats active with one route using it,
might not be active with the other. We can see this with
routes trying to resolve to themselves.
Ex)
1.1.1.0/24
-> 1.1.1.1 dummy1 (inactive)
-> 1.1.1.2 dummy2
1.1.2.0/24
-> 1.1.1.1 dummy1
-> 1.1.1.2 dummy1 (inactive)
Without checking each nexthop individually, they will
hash to the same group since they have the same number of
active nexthops.
Fix this by looping over every nexthop for each nhe (they should
be sorted) and checking if the NEXTHOP_FLAG_ACTIVE flag's match.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
We cannot clear the NEXTHOP_FLAG_FIB nexthop flag
when sending routes to the dataplane anymore since
nexthops are now shared.
We were seeing a situation where if we delete a route
using a nexthop group that is still active with another
route, the fib flag was being unset by this code
path despite them still being valid fib nexthops with the
other route.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
We were crashing due to a missed label change code path
in mpls_ftn_uninstall() with the zebra_nhg hashing code.
Add a static handler function for label changing everywhere
in that code and use it in mpls_ftn_uninstall().
The crash was found in the ISIS-SR tests:
==23== Thread 1:
==23== Invalid read of size 4
==23== at 0x15B20E: zebra_nhg_hash_equal (zebra_nhg.c:365)
==23== by 0x489A2FD: hash_get (hash.c:143)
==23== by 0x489A4BC: hash_lookup (hash.c:183)
==23== by 0x15B5A3: zebra_nhg_find (zebra_nhg.c:494)
==23== by 0x15C536: zebra_nhg_rib_find (zebra_nhg.c:1070)
==23== by 0x1573E8: mpls_ftn_update (zebra_mpls.c:2661)
==23== by 0x1A2554: zread_mpls_labels_replace (zapi_msg.c:1890)
==23== by 0x1A41CD: zserv_handle_commands (zapi_msg.c:2613)
==23== by 0x199B17: zserv_process_messages (zserv.c:517)
==23== by 0x48EE6B7: thread_call (thread.c:1549)
==23== by 0x48A8AD5: frr_run (libfrr.c:1064)
==23== by 0x1391B7: main (main.c:468)
==23== Address 0x5839330 is 0 bytes inside a block of size 80 free'd
==23== at 0x48369AB: free (vg_replace_malloc.c:530)
==23== by 0x48AEE6C: qfree (memory.c:129)
==23== by 0x15C5F8: zebra_nhg_free (zebra_nhg.c:1095)
==23== by 0x15BC8C: zebra_nhg_handle_uninstall (zebra_nhg.c:734)
==23== by 0x15DCFA: zebra_nhg_uninstall_kernel (zebra_nhg.c:1826)
==23== by 0x15C666: zebra_nhg_decrement_ref (zebra_nhg.c:1106)
==23== by 0x15D9D7: zebra_nhg_re_update_ref (zebra_nhg.c:1711)
==23== by 0x15D8B1: nexthop_active_update (zebra_nhg.c:1660)
==23== by 0x167072: rib_process (zebra_rib.c:1154)
==23== by 0x168D72: process_subq_route (zebra_rib.c:2039)
==23== by 0x168E92: process_subq (zebra_rib.c:2078)
==23== by 0x168F5B: meta_queue_process (zebra_rib.c:2112)
==23== Block was alloc'd at
==23== at 0x4837B65: calloc (vg_replace_malloc.c:752)
==23== by 0x48AED56: qcalloc (memory.c:110)
==23== by 0x15B07B: zebra_nhg_copy (zebra_nhg.c:307)
==23== by 0x15B13E: zebra_nhg_hash_alloc (zebra_nhg.c:329)
==23== by 0x489A339: hash_get (hash.c:148)
==23== by 0x15B6CA: zebra_nhg_find (zebra_nhg.c:532)
==23== by 0x15C536: zebra_nhg_rib_find (zebra_nhg.c:1070)
==23== by 0x15D89A: nexthop_active_update (zebra_nhg.c:1658)
==23== by 0x167072: rib_process (zebra_rib.c:1154)
==23== by 0x168D72: process_subq_route (zebra_rib.c:2039)
==23== by 0x168E92: process_subq (zebra_rib.c:2078)
==23== by 0x168F5B: meta_queue_process (zebra_rib.c:2112)
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Use a local variable to avoid trying to take the address
of a packed struct member - an address from the ip header
in these cases.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
