OSPFv3 recently introduced the usage of import route. Switch it
back to using the normal ZEBRA_NEXTHOP_REGISTER command.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add the "default-information-originate" option to the "area X nssa"
command. That option allows the origination of Type-7 default routes
on NSSA ABRs and ASBRs.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When a router-id change is notified by zebra to ospf6d, we only take
into account the change if no adjacencies are in Full state.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
RFC 5187 specifies the Graceful Restart enhancement to the OSPFv3
routing protocol. This commit implements support for the GR
restarting mode.
Here's a quick summary of how the GR restarting mode works:
* GR can be enabled on a per-instance basis using the `graceful-restart
[grace-period (1-1800)]` command;
* To perform a graceful shutdown, the `graceful-restart prepare ipv6
ospf` EXEC-level command needs to be issued before restarting the
ospf6d daemon (there's no specific requirement on how the daemon
should be restarted);
* `graceful-restart prepare ospf` will initiate the graceful restart
for all GR-enabled instances by taking the following actions:
o Flooding Grace-LSAs over all interfaces
o Freezing the OSPF routes in the RIB
o Saving the end of the grace period in non-volatile memory (a JSON
file stored in `$frr_statedir`)
* Once ospf6d is started again, it will follow the procedures
described in RFC 3623 until it detects it's time to exit the graceful
restart (either successfully or unsuccessfully).
Testing done:
* New topotest featuring a multi-area OSPF topology (including stub
and NSSA areas);
* Successful interop tests against IOS-XR routers acting as helpers.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Move `is_default_prefix` variations to `lib/prefix.h` and make the code
use the library version instead of implementing it again.
NOTE
----
The function was split into per family versions to cover all types.
Using `union prefixconstptr` is not possible due to static analyzer
warnings which cause CI to fail.
The specific cases that would cause this failure were:
- Caller used `struct prefix_ipv4` and called the generic function.
- `is_default_prefix` with signature using `const struct prefix *` or
`union prefixconstptr`.
The compiler would complain about reading bytes outside of the memory
bounds even though it did not take into account the `prefix->family`
part.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
ospf6_router_id_update function is used by ospf6_router_id_update_zebra
to update the running the ospf6 router-id.
This patches makes the functions to (un)configure ospf6 router-id use
the same function as ospf6_router_id_update_zebra.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
---
When a router-id change is notified by zebra to ospf6d, we only take
into account the change if no adjacencies are in Full state.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
The code had no limits on addresses configured on an interface running
ospf6d. The code would crash when more than 100 addresses were added.
This change limits the number of interface address to 100 if mtu is set
to the default value. If the mtu is set to a jumbo packet size or larger
we will support 200 interface addresses.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
Back when I put this together in 2015, ISO C11 was still reasonably new
and we couldn't require it just yet. Without ISO C11, there is no
"good" way (only bad hacks) to require a semicolon after a macro that
ends with a function definition. And if you added one anyway, you'd get
"spurious semicolon" warnings on some compilers...
With C11, `_Static_assert()` at the end of a macro will make it so that
the semicolon is properly required, consumed, and not warned about.
Consistently requiring semicolons after "file-level" macros matches
Linux kernel coding style and helps some editors against mis-syntax'ing
these macros.
Signed-off-by: David Lamparter <equinox@diac24.net>
Add a `enum zclient_send_status` for appropriate handling
of return codes from zclient_send_message. Touch all the places
where we handle this.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
1. All the changes are related to handle ospf6 with different vrf.
2. The dependancy of global ospf6 is removed.
Co-authored-by: Kaushik <kaushik@niralnetworks.com>
Signed-off-by: harios_niral <hari@niralnetworks.com>
1. Removed the VRF_DEFAULT dependency from ospf6d.
2. The dependency on show command still exist
will be fixed when the ospf6 master is available.
Co-authored-by: Harios <hari@niralnetworks.com>
Signed-off-by: Kaushik <kaushik@niralnetworks.com>
For all the places we have a zclient->interface_up convert
them to use the interface ifp_up callback instead.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Switch the zclient->interface_add functionality to have everyone
use the interface create callback in lib/if.c
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Debian packaging when run finds a bunch of spelling errors:
I: frr: spelling-error-in-binary usr/bin/vtysh occurences occurrences
I: frr: spelling-error-in-binary usr/lib/frr/bfdd Amount of times Number of times
I: frr: spelling-error-in-binary usr/lib/frr/bgpd occurences occurrences
I: frr: spelling-error-in-binary usr/lib/frr/bgpd recieved received
I: frr: spelling-error-in-binary usr/lib/frr/isisd betweeen between
I: frr: spelling-error-in-binary usr/lib/frr/ospf6d Infomation Information
I: frr: spelling-error-in-binary usr/lib/frr/ospfd missmatch mismatch
I: frr: spelling-error-in-binary usr/lib/frr/pimd bootsrap bootstrap
I: frr: spelling-error-in-binary usr/lib/frr/pimd Unknwon Unknown
I: frr: spelling-error-in-binary usr/lib/frr/zebra Requsted Requested
I: frr: spelling-error-in-binary usr/lib/frr/zebra uknown unknown
I: frr: spelling-error-in-binary usr/lib/x86_64-linux-gnu/frr/libfrr.so.0.0.0 overriden overridden
This commit fixes all of them except the bgp `recieved` issue due to
it being part of json output. That one will need to go through
a deprecation cycle.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
vrf_id parameter is added to the api of bfd_client_sendmsg().
this permits being registered to bfd from a separate vrf.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This macro:
- Marks ZAPI callbacks for readability
- Standardizes argument names
- Makes it simple to add ZAPI arguments in the future
- Ensures proper types
- Looks better
- Shortens function declarations
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The rib process of handling routes has been unified a bit more
and as a result v6 LL routes are now showing up as a result
of a `redistribute connected`. Doing anything with these
routes is a policy decision that should be enforced by the
individual routing daemons not by zebra. As such add a bit
of code to isisd, ripngd and opsf6d to handle them. The bgp daemon
already handles this situation.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Some daemons like ospfd and isisd have the ability to advertise a
default route to their peers only if one exists in the RIB. This
is what the "default-information originate" commands do when used
without the "always" parameter.
For that to work, these daemons use the ZEBRA_REDISTRIBUTE_DEFAULT_ADD
message to request default route information to zebra. The problem
is that this message didn't have an AFI parameter, so a default route
from any address-family would satisfy the requests from both daemons
(e.g. ::/0 would trigger ospfd to advertise a default route to its
peers, and 0.0.0.0/0 would trigger isisd to advertise a default route
to its IPv6 peers).
Fix this by adding an AFI parameter to the
ZEBRA_REDISTRIBUTE_DEFAULT_{ADD,DELETE} messages and making the
corresponding code changes.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
It's been a year since we added the new optional parameters
to instantiation. Let's switch over to the new name.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Store zebra router-id in global structure.
Before router ospf6 instance created,
zebra router-id callback called.
During ospf6 main execution zebra init happens,
but default instance does not execute until
cli replay 'router ospf6'.
Call ospf6_router_id_change during 'router ospf6'
to assign zebra router id to ospf6 instance.
Ticket:CM-19937
Testing Done:
Assign Loopback /32 (6.6.6.6/32) address,
restart frr with (router ospf6 in frr.conf).
ospf6 default instance assigned 6.6.6.6 router-id.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Notify user to store config and restart ospf6d
as part of router-id change cli if any of
the area active.
Store zebra router-id under ospf6, when static
router-id removed restore zebra router-id, ask
to restart ospf6d.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
