The packet length is added to iptable zapi message.
Then the iptable structure is taking into account the pkt_len field.
The show pbr iptable command displays the packet length used if any.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The icmp type/code is displayed.
Also, the flags are correctly set in case ICMP protocol is elected.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This is an additional correction after 45981fda06 / PR #2462. I hope
this fixes the Coverity warning (I've added an additional check for ensuring
the string provided by the inotify read is zero-terminated).
Signed-off-by: F. Aragon <paco@voltanet.io>
When a filter function fails to work correctly, we get an
error message that something has gone wrong. Unfortunately
we may not have any clues as to where the decode failure
happened. Add a backtrace to give us a clue.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we receive a netlink message from the kernel we have
handler functions for when we send a netlink command, if these
return a failure ( < 0 ) then we output that we had a parse
issue. But if all we get is:
2018-06-21T23:47:45.298156+00:00 qct-ix1-08 zebra[1484]: netlink-cmd (NS 0) filter function error
Then it is not very useful to figure out *where* the error happened.
Add more error code when in a decode path to hopefully allow us
to figure out where this message is coming from.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This is a correction over 7f61ea7bd4 in order
to avoid the TAINTED_SCALAR Coverity warning (ending in "Untrusted array
index read"). This is equivalent to the previous commit, but avoiding
pointer arithmetic with tainted variables.
Signed-off-by: F. Aragon <paco@voltanet.io>
Add code to request and read in extended ack information
to provide a bit more context of what went wrong when
a failure is detected in the kernel.
Example of a failed delete:
Jun 20 21:19:25 robot zebra[11878]: Extended Error: Invalid prefix for given prefix length
Jun 20 21:19:25 robot zebra[11878]: netlink-cmd (NS 0) error: Invalid argument, type=RTM_DELROUTE(25), seq=8, pid=4078403400
Jun 20 21:19:25 robot zebra[11878]: 0:4.3.2.0/24: Route Deletion failure
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This is a correction over 32ac96b2ba, so
removing the forced string null termination doesn't involve a worse situation
than before (the underflow check should protect for the case of receiving
an incomplete buffer, which would be the cause of non-zero terminated string)
Signed-off-by: F. Aragon <paco@voltanet.io>
The route_map_walk_update_list callback function
never uses the return code, so just remove it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add some basic code for zebra to start to keep track
of route-maps that have changed. At this point we
are not doing anything. As we fix code to handle
route-maps better, code will be shifted around.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problem reported that if the vrf device is taken down and then brought
back up, any static route referencing that vrf device was not
re-installed. This fix runs back thru the static routes that
reference the vrf device coming up and re-install them.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Hide following l3vni config from DEFAULT_VRF instance
until it is fully supported.
TORS1(config)# vni 2222456 prefix-routes-only
Ticket:CM-20572
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Cleanup the zebra code to test for failure for reading
from stream once instead of once to see if we should
debug and once for the actual failure.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
New version of clang are detecting function parameters that we should
not be casting as such. Fix these issues.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The IFLA_INFO_SLAVE_KIND constant is always defined now that we imported
our own copies of the Linux kernel headers. Remove the preprocessor
checks since they aren't necessary anymore.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When we have a host prefix, actually free the alloced memory
associated with it when we free it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When debugging code in redistribute.c, it is useful to output
the vrf we think the interface is in. So display it
when we are debugging.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Programs that link to libnetsnmp must be compiled using a special set
of flags as specified by the "net-snmp-config --base-cflags" command
(whose output is stored in the SNMP_CFLAGS variable). The problem is
that "net-snmp-config --base-cflags" can output -std=c99 in addition to
other compiler flags in some platforms, and this breaks the build since
FRR souce code makes use of some GNU compiler extensions (e.g. allow
trailing commas in function parameter lists). In order to solve this
problem, append -std=gnu99 after SNMP_CFLAGS in all makefiles where this
variable is used. This way the -std=c99 flag will be overwritten when it's
present. Source files that don't link to libnetsnmp will be compiled using
either -std=gnu99 or -std=gnu11 depending on the compiler availability.
Fixes#1617.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
That fix is a workaround from a vtysh limitation.
Because table identifier should be accessible in configuration only for
vrf netns backends, there was a need to differentiate the vty commands.
Unfortunately, vtysh parses the two commands without knowing which
command has really been installed.
Using one single vty command will avoid having this issue in vtysh.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
By default, nothing is displayed. If vrf backend is linux network
namespaces, then "netns-based vrfs" is displayed, before dumping the
list of VRFs.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
In the case where vrf backend is netns, then the list of ns tables may
be extended. A single list is kept,but an attribute is added: the ns_id.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
As table_id for VRF with netns backend is main table ( RT_TABLE_MAIN or
zebrad.rtm_table_default), this makes possible to return the table id
that wants to be configured for those cases. ( in addition to default
VRF). In other cases ( VRF Lite presumably), then vrf table_id is
returned.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Add the table keyword for all ip route/ip mroute/ipv6 route commands
that are available. Also, the main structure is being added a table
identifier.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
